Connect USB hard drive to the SD2010KY DVD player

Similar Questions

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• Satellite Z930 - suspend the problem with connected USB hard drive

  Hello

  Owner of a newly acquired Satellite Z930-15 X, I have a few questions/problems:

  1) suspends the work of RAM and good hibernation when there is no external hard drive connected. If there is one is connected, the laptop immediately returns back to suspend state. Is there a solution for this?

  (2) is there a way to selectively disable Bluetooth? Currently, only toggle airplane mode is available (with Fn + F8 or Windows 8 charm bar). This activates / deactivates the Wi - Fi or Bluetooth I think.

  (3) the portable computer is wobbly on reception. I put a bit of thin paper at the corner of a bottom (bottom left) so that it can be stabilized. Apparently, the problem is also mentioned in another thread. Is there a suggestion to fhix this problem?

  Thank you.

  1 / what HARD drive is connected to your laptop? When I use the external 2.5 HARD drive with my Satellite U940 I n t have problem.

  2 / I ve tested it on my machine and I noticed the same thing. When WIFI is disabled software BT is off too. I didn t find a way how to separately control adapter WLAN and BT.

  3 / I think that this issue needs to be clarified with Toshiba service. They must check and perhaps exchange rubbers inside.

• Satellite L670 - 1 DG PSK3EE - I want to insert HARD drive in the CD/DVD drive Bay

  Hi all

  Before you begin, sorry for my English, I'm french.

  I have a Toshiba L670 1 DG (PSK3EE) with a 500 GB HARD drive.

  I want to put this disk in the CD/DVD rack with an adapter and put a 64 GB SSD into the HARD drive slot.
  (I do not use the DVD player, I will make it external).

  But I don't know where I can find this CD/DVD rack HDD adapter, I searched on eBay, but I think that it is not
  for my Toshiba...

  Can you help me?

  Concerning

  Arnaud

  Hello

  I put t think it's possible, here, for this series of laptop.
  As far as I know the laptop must support a Slim Select Bay to use something like Slim Select Bay adapter HARD disk * PA3134U-2CTE *.

  But just a few special Toshiba Portege and Tecra Tecra M1, M2, M3, M4, S1, S2 support this

• Error in the driver for the new DVD player,

  The SATA DVD drive is nine, works of a system boot when I put in a windows install disc and do a start up cold, but drive does not work to complete startup. Got update driver and same driver deleted and reloaded, still does not work, contact manufacturer (Memorex) not much help from them other that telling them that this is a conflict of microsoft. Checked the settings of currency, system error Code 39 in the properties of the device such that the system does not recognize the reader cannot understand cela one, seems to be a software conflict but do not know if this is another driver or Vista conflict causing the error code. Flat, system does not recognize the drive. After running the driver update you get a msg saying the system thinks that the best driver is already installed.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• IdeaPad V570 - I need my external USB hard drive to the new drive D

  I have all my work files on a hard disk of laptop HD that allows me to share my work between my desktop and my laptop. My portable HD player was named D: drive because of the huge amount of custom templates special and the formulas that I use in my daily work. Unfortunately, the software I'm using is old fashioned so I can not change the drive letter.

  Because my old laptop crashed I now have the new IdeaPad V570 so I had to change the drive letters when it dawned on me that the Lenovo D: drive is full of drivers, fingerprints and One - Key recovery software that probably, I can not change the letter of the drive on. What can I do?

  As seems to be important, mission critical, in your case I would suggest the following:

  After that the creation of a set of records of recovery and backup of your files, if you have not already, go ahead and change the drive letter. I confess that I do not know the V570, but honestly, I can't imagine Lenovo put anything on the D drive which, once removed would affect the functionality of the system.

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• AC2400 (E8350) router cannot map USB hard drive in Windows network.

  Hi all

  I recently bought the Linksys AC2400 wireless router and a USB 3 Western Digital Elements 2 TB hard drive.

  The network works perfectly, except for the USB hard drive. The firmware on the router recognizes it okay, but in the windows network, I can't access your hard drive. I simply get a path not found error.

  I tried:

  Y access inside or outside Windows Homegroup.

  -Re - formatting in the linksys configuration (Fat32... There is room for improvement)

  -Test the USB drive directly into the PC, works perfectly and formatted in NTFS.

  -Turn off all firewalls.

  -Tried the port USB2/Esata instead of the USB3

  Also, from another computer on the network, I get the same error.

  Pre-installed on the hard drive was a mediaserver program called Twonky. He wants autoconnet to my router using port 9000, but the web interface I get then does nothing. Also when I enable the mediaserver configuration linksys website, he created a mediaserver in windows network, wth pilots twonk. But I can't change that.

  When I test the ftp server, I had access to the hard drive without any problem. This suggests that it is not a compatibility problem.

  I could also map the Windows ftp server, but that does not work on my mediaplayer, I need for this network interface.

  Does anyone have an idea of what I'm doing wrong and why windows is unable to connect to your hard drive?

  I didn't install the new version of firmware, because the changelog mentions nothing about the functions of the USB or storage.

  I've added a few photos with the settings, it could be useful.

  THX in advance for any response.

  

  Map of old-school reader:

  1. Open the file Explorer or (right click computer and 'Map network drive')
  2. Click "Map network drive" in the top menu
  3. Choose the drive letter
  4. Enter "\\192.168.1.1\" or "\\192.168.1.1\your-share-name".
  5. Add identifying information if access to the secure folder is enabled "Admin" and password

• Windows 7 and bios sees not the hard drive, but when I connect the hard drive to the USB with an adapter, I see directories and files

  Please, I need pc

  Original title: windows 7 and bios does not see the hard drive. but when I connect the hard drive to the USB with an adapter, I see directories and files... Ive a hp Pavilion, what to do?

  Check the BIOS for hard drive setting.

  Make sure that you do not connect the drive to a SATA/RAID port.

  Old IDE drives - check the jumper on the drive (use "Cable Select" as a starting point), the BIOS must also be set in legacy/compatibility/IDE mode. Note: If you currently use the AHCI mode, then switch to IDE mode may cause Windows to boot.

  J W Stuart: http://www.pagestart.com

• Connect to airport extreme USB hard drive

  I have a drive external hard Iomega LDHD-UP that I want to connect to my Airport Extreme (running the 7.6.4)... version but I can't seem to do.)

  Currently, the airport is set up as a bridge to my Verizon Fios router.  It all works very well.

  The instructions from Apple don't seem to help me, because I do not have "Airport disk utility" - only "Airport utility" - and I'm hit a roadblock there.
  (Airport: how to mount a volume of Airport Extreme USB hard drive in Mac OS X and Windows - Apple Support)

  Normally, I can understand something like this, I thought I would ask for help rather than making circles for another hour.

  Any advice?  Thank you.

  OK, so I read all the info in this article,where to get the Airport disk utility >

  ... and I now know that 'The airport disk utility' is no longer (and does not have the article I cited above), but I'm not even see my drive hard when it is connected to the Airport Extreme.

• Office Pavilion - 400-540hk: unable to retrieve files from the old desktop USB HARD drive

  My old desktop (model: CQ4128HK) can be power on. So I bought a new desktop computer (model: Pavilion Office 400 540HK). I have a lot of important files in my old office, so I bought a SATA-USB enclosure and connect my old hard drive to the new office. However, after connecting the old HARD drive, I can't find my files or windows folders; Instead, I see that a single drive with folders named "Backup-xXXx" or "WindowImageBackup".  Please suggest how to recover my files on the old HARD drive. They are very important. Thank you.

  Hello

  Please try this first: bring the box (old HDD) and connect it to a machine not HP to see how it goes. I remember I have one similar problem in another day; reason: the old HDD still has a "signature" as a boot device.

  Kind regards.

• External USB hard drives lose its connection and work stoppages. __

  External USB hard drives lose its connection and work stoppages.

  History

   
  Windows 7 Ultimate - 64-bit
  I installed it on a HP Pavilion, OS, 64-bit, and I have this problem.
  People report that it does not occur with Windows 7 32 bit OS.

  Problem:
  Any brand of external hard drive USB (and other USB devices sometimes) lose its connection and stops working only when copying large files internal drive to external USB drives.
  The USB device may appear to work properly when Windows first starts, but later stops working (crashes computer) after the start of large files to copy. You must restart Windows for the USB is working again.
  This only occurs when you copy files large files to THE USB port, not on the internal drive. It happened when I synicing my IPhone with Itunes when it started the synchronization of music files.

  According to the suggestions I have:
  1) updated the BIOS from the websites of the manufacturers.
  (2) power management disabled on the USB hub for disks
  (3) ensure that the BIOS for Legacy USB is set to.  I don't have this option in the BIOS settings.
  (4) this is not a motherboard problem, it is located on three different MB that we use.
  Also tried three different USB drives and different cables.

  Because I tested with two different computers updated and USB drives, our opinion is that this problem indicates that the Windows 7 64-bit operating system.

  Someone knows a solution?

  Hi Jh6284,

  Thank you for posting.
  What is a version of Windows 7 RC or RTM?

  You can try to uninstall and reinstall the drivers for the USB ports in Device Manager.

  UNINSTALL ALL USB ENTRIES IN DEVICE MANAGER ASSOCIATES.

  1. click on START
  2. right click "Computer" and select "Properties".
  3. on the left side, click on Device Manager.
  4. expand the 'USB Bus controllers' category
  5. right click and uninstall all THE references listed
  6. restart your computer and check if it works.
   
  I suggest you go to the Web site of the manufacturer of your and try to install the latest drivers for the chipset. Make sure that install you in compatibility mode there is no driver for Windows 7 64 bit.

  Please go through the article below to install in compatibility mode.
  http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/cdd894f8-1ee2-43e5-952b-d04c25779a7f

  Kind regards
  Technical support of Microsoft-yama.

• Unable to connect the external hard drive on the computer of Windows 8

  Hi I have a laptop Windows 8, I don't know too plug I bought last year I recently bought a samsung 3 TB external hard drive I plugged it in and it was recognized tried to transfer files (photos and music) he transferred a little then kept showing error e/s even when I clicked ignore it just kept showing for the next photo , so I unplugged and ive not touched since ive then connected again today to have another shot at it but it does not even appear in the my computer part now ive red somewhere else on this site to go into Device Manager and I can see the mass with a yellow triangle storage device small as he said he could on the subject , I was reading I uninstalled and plugged the hard drive on and when I plug it then settling again, nothing appears when I go back into Device Manager it is there once again with the yellow triangle, thanks in advance if anyone can give me advice.

  Thanks for the reply.

  Have you tried to uninstall and reinstall the USB controller drivers?

  If so, have you installed latest drivers from the motherboard chipset?

  Follow the steps below and check if it works:

  1 download the drivers for external hard drive from the following link and check.

  http://www.Samsung.com/us/support/downloads

  2. click on the link to the HP Web site below to download the latest drivers. Search for drivers related to USB / external peripheral.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5078476

  Click scan now.

  
  3. If you have a third party security/firewall software installed, you need to change settings or disable it temporarily.
   
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software / update, you must reactivate as soon as you are finished. If you are connected to the
  Internet or network so that your antivirus software is disabled, your computer is vulnerable to attacks.
   
  I hope this helps. Back to us for assistance.

• Cannot see the USB hard drive?

  Hello

  I created a new XP Pro VM environment and everything seems great so far, however, one of my devices is an external USB hard drive (this is where lies the VMX file).

  Yet I do not see it as a connected device, it is not in the list of devices to be tied down to the machine virtual host?

  Why am I unable to see this device USB of the XP Guest VM and how to make it visible?

  Thank you

  1DMF

  1. NOT to assign a USB device to the virtual computer - at least, do NOT attempt to use the disk USB us talk

  2 instead of this, make sure that you configure network between the host and guest

  3. create Windows shares on USB drive

  4. access to this sharing of the Interior of the guest

  This will result in the host beeing the only system that accesses the USB directly - which is the only safe way to do

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• How to change the icon of the USB hard drive?

  My external USB hard drives have this icon,

  http://photoserver.WS/images/N2684b7563a181ccc.PNG

  I guess because I deleted somehow autorun.inf file. I tried to change, guide following from this link

  http://www.astahost.com/info.php/change-drive-icons-labels_t7859.html

  but failed. Make a right click on the (H) does not give me the option to change the icon. How to change? Is it possible to do so directly, by selecting another one of shell32.dll, or more must do something with the registry?

  Also failed, recommendation with file autoran.inf

  [AutoRun]
  label = hard USB
  Icon = slick_hd_green.ico

  in accordance with the instructions of the

  http://www.WikiHow.com/change-the-icon-of-removable-drives

  In meentime, I changed his computer management Label, now it is hard USB and then noted:

  http://photoserver.WS/images/eYZB4b758eb2be362.PNG

  and here is happy about its autoran subfolder

  http://photoserver.WS/images/MRmz4b758eb2c5113.PNG

  What should do?

  And another question: what is the best (small) software to create data photos icons?

  Hello

  Your ad is a bit confusing
  Which external HARD drive, you have exactly?

  I know for readers of the icon can be changed in the Windows registry but is it really so important? I doubt that