SDK patterns have moved - but where?

Similar Questions

• Try to set up my Elipse on my computer. Have the microSDHC card/w adapter. Where should I go from here. The chip is in the adapter but where to insert into the computer to get results!

  Try to set up my cell phone to Elipse with microSDHC card/w adapter.  The chip is in the adaptor, but where can I insert the adapter in the computer.  Have an inspiron 531.  "Any help would be greatly apprecialted!   =}

  Hi NancyDolezal,

  Connect the phone via USB. You must insert it into a USB port and check if it detects is.

• How to change your settings to allow you to be able to place images and things outside of the artboard when you work? I have it on a single file and I opened another and the setting seems to have changed, but I can't find where to change it.

  How to change your settings to allow you to be able to place images and things outside of the artboard when you work? I have it on a single file and I opened another and the setting seems to have changed, but I can't find where to change it.

  I think that things are there, but just hidden.

  Try this:

  Make sure that your cursor is not in a text box, and then type a W.

• I want to install creative cloud. When I connect with my personal information, I can't have the country where I live. I call the free number but it is the number o the firefighter... How can I change the country where I live to make the payment?

  I want to install creative cloud. When I connect with my personal information, I can't have the country where I live. I call the free number but it is the number o the firefighter... How can I change the country where I live to make the payment?

  Please see the change of the country associated with your Adobe ID.

  To change the Adobe ID, you can check your Adobe ID account management

  For further help please contact the Support from Adobe on the Customer Contact

  Hope this will help you.

  Kind regards

  Hervé Khare

• I want to re install with a clean sheet. I have install, but my old catalog loads again. How do I delete catalog and where it is stored. I lost some of the media that came with my drive by accident so I need to re install

  I want to re install with a clean sheet. I have install, but my old catalog loads again. How do I delete catalog and where it is stored. I lost some of the media that came with my drive by accident so I need to re install

  HI ATR

  Just update you 13 windows 7 items... I sat until midnight and found the program data and ended up finding the catalog. I deleted the catalog now. and uninstalled items 13. I hope that when I reinstall it will be like new, and I can go back again. I had messed up I saw when viewing the photos in the media, it was media files and thought they shouldn't be there so I deleted them. Maybe thinking about now I get an error. Before, I made a slideshow with the media from the drive. I just started using elements 13 I used windows live previously for videos. Can you let me know also what photoshop elements or first, you use the most.  Also if I import video files in why do I see them I think of thumbnails. That's where I went wrong and thinking, they shouldn't be here. I brought a few books and trying to go through the learning process. What camera do you use?  Many questions sorry. Thanks for any help.  Russell

• I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.

  As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.

  The serial number is to the right of the download link for Windows. You'll need this one, not your old number.

  Get them here: download Acrobat 7 and CS2 products

• When I use google chrome I keep hearing ads, but I have no idea where they come from

  • When I use google chrome I keep hearing ads and I have no idea where they come from

  It not on chrome, if you be online you'll see ad... Ads come only from internet, they pay goole to show you what you can click on the link to see their ad

  Here are the details how to block or manage the ad

  https://chrome.Google.com/WebStore/detail/Adblock/gighmmpiobklfepjocnamgkkbiglidom?hl=en

• all my icons have moved from the bottom of the screen to the right, I would put them on the bottom, but don't know how to do, thank you very much

  all my icons left the bottom of the screen to the right side, I must have clicked bad some were, I'd be very happy of have moved them to the bottom of my screen.

  any help would be appreciated

  Right click, click on the taskbar and make sure that there is no check mark in the box "lock the taskbar" then left click on the taskbar and just drag it to the bottom of the screen. Put a check mark in the box "lock taskbar.

• I have moved to another country and you want to buy and use my original store movies. Is this possible?

  I am a teacher and have moved to Europe and want to buy and use movies on my original Australian iTunes store for my classes. Is this possible? Thanks for any help.

  No, you can use the store for the country where you are now (part of the terms of the store is having to be in a country to use his shop). If the movies are not available in your new country store you can try to contact the film studio/holder of rights and ask them to license to Apple to sell it

• IPod Classic (5th generation) runs irregularly on audio books.  Have reset, but nothing helped.

  I have an Ipod with click wheel and video display, 30 GB that is running very erratic lately when I'm listening to audio books.  I have reset, but this doesn't seem to help.  Restoration possibly help?  Sometimes it goes back early in the book, sometimes it won't go forward.

  You can try the command reset the settings .  This command is on the settings on the iPod screen.  It should be at the bottom of the list.  This resets all the settings of the iPod, where a damaged framework is at the origin of the problem.

  Another thing to try is to remove all the audio books of the iPod, in changing the Automatic iPod sync, giving (in iTunes) NO synchronization of audio books (disable the synchronization of audio books).  Sync iPod to remove audio books.  Then, set up the synchronization of audio books, once again, as if it were before.  Sync iPod to add audio books.  See if there is a difference with fee copy files to iPod audiobook.  NOTE: If you use the Manual setting to load audio books, the process of removing the iPod audio books is different; You can post back for more information.

  If this does not help, he can you want to do a restore on the iPod using iTunes.  This erases iPod, reinstall its software and sets it to the default settings.

• How can I download adobe on my desk? I bought adobe photoshop, but where can I I like to download the

  How can I download adobe on my desk? I bought adobe photoshop, but where can I I like to download the

  Have you tried to download link below?

  Download Photoshop Elements | 10, 12, 14, 11, 13

• ORA-27037 standby after you have moved the primary files

  I'm under Oracle 11.2 with a physical Data Guard configuration primary and standby on Solaris 10.  Asked me to move all the files belonging to the primary to a new mount point.  This includes the datafiles, tempfiles, ORLs, litigants and the controlfile.  On the main file system files were located on /u07 and are now on /u03.  Pending files are on /u07.

  Here's what I did:

  Cancel managed recovery and stop in standby mode.

  Judgment of the primary.

  A file system has copied on the primary /u07 to /u03.

  Control_files primary init.ora file parameter to point to the new location on /u03 and change log_archive_dest_state_2 = DEFER

  Renamed the primary spfile with a ".bak" then primary would begin by init.ora file.

  Elementary school:

  startup mount;

  Run A SQL script to rename the data files, tempfiles, ORLs and SRls to the new location on /u03.

  ALTER database open;

  Create spfile from pfile;

  stop immediately;

  start-up;  (so primary is now started with a spfile)

  Standby:

  Change these two lines in the init.ora file:

  *.db_file_name_convert='/U03/oradata/mydb/','/U07/oradata/mydb /'

  *.log_file_name_convert='/u03/oradata/MYDB/log','/u07/oradata/MYDB/log_ '

  Note: When Eve was created first, someone created the ORLs with a different name of the primary.  For example, major newspapers are named log1a, log2a and log3a.  The day before, they are named log_1a, log_2a and log_3a.

  Renamed the spfile Eve with a ".bak" then Eve would begin by init.ora file.

  bootable media;

  At this point, I have seen these errors in the standby alert log:

  Errors in the /oracle/diag/rdbms/mydb_stby/MYDB/trace/MYDB_lgwr_27569.trc file:

  ORA-00313: open failed for the members of Group 3, Journal of thread 1

  ORA-00312: wire 3 1 online journal: ' / u07/oradata/MYDB/log3a.dbf'

  ORA-27037: unable to get file status

  SVR4 error: 2: no such file or directory

  Additional information: 3

  ARC3: Started archiving

  ARC0: FROM PROCESS ARCH COMPLETE

  Here are my questions: why is the database ensures looking for online newspapers as they are named in the primary?  (Without the underline in the name)

  Should I have set STANDBY_FILE_MANAGEMENT = MANUAL on the primary and standby and renamed implementing the ORLs in the standby?

  What I ended up doing was closing the day before and rename the ORLs on the filesystem depending on how they are named on the primary.  Then, the day before, I did:

  startup mount;

  change retrieve in database managed automatic standby database using the current log file disconnect from the session;

  Then, on the primary, I did: alter system set log_archive_dest_state_2 = ENABLE;

  Everything looks OK, which means, newspapers are shipped from the primary to the standby and applied on the day before.

  I wonder, what would I have done differently to avoid first encountered this error?  Also, is my valid Eve at this point?  I see no problem in the primary alert log or journal alerts in mode standby.

  Mimi Miami wrote:

  Thank you, CKPT.  Now, I understand my misunderstanding with the log_file_name_convert parameter.  The parameter is used to convert file locations of the ORLs on standby, not the name of the file of the BDL himself, correct?  Knowing this, would it not imperative that the file is named game?  In other words, I can't have an ENT named log1a on the primary with his match on the eve log_1a appointed, right?

  Yes, setting gives way where to redirect the log files, but what happens if the mentioned directory does not exist on the database pending?

  As on previous day $ls ltr - / u07/oradata/MYDB/log_

  When there is no available pending directory as you have not mentioned in LOG_FIILE_NAME_CONVERT then it cannot translate the strings either.

  File names, you can have anything but basically LOG_FIILE_NAME_CONVERT is here to rename the log files if there are in different places.

• Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' table

  Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' round table. Thank you

  Oh dear.  It turned into a terrible mess of a thread with opinions and advice.    You do your layout with Word.  In my experience, Word is a nightmare when it comes to positioning many areas of text and images.

  You shouldn't have changed the Word document in a JPG file, because the text all which perfectly progressive, which would be printed to "all" size without loss of image quality, then became an image file.  But if you "had" to make it a JPG, just about the worst possible way to do this is with the Snipping Tool, because the resulting image would have only the resolution of your computer screen.  Dows following?

  How big are the pictures you used in Word?  They probably didn't need to be very large, because each image is only an impression at a relatively small size.

  First thing to try is to open the Word Document and save in PDF format using the Standard option (after you select Save as PDF

  It will keep the text in the form of scalable vector objects which allows printing at any size.  However, I don't have the knowledge of how Word uses images.  I just did a little test, and while I could zoom in to see in the text, I'm not sure that the same is true of the images.  Depends on word refers to the image of the player, or he brings as an object of frame size, and I suspect it's the latter.  You need to do some research on it, because it might make you save a lot of time.

  You have Publisher?  Editor certainly reference the drive images, and friezer downsize to fit the page.  I suspect that you can import a Word into Publisher document, which would put you best part of the way with it.  I would like to test it, but I use it as a loyal user of Adobe InDesign.   If you are forced to restart, then editor or InDesign would be lot better, but it's doable with Photohop.  Just make sure that you start with enough pixels, which means 36 inches at 300 dpi or 10 000 square pixels.  When did save as PDF using the preset high quality printing, and ask your color printer (probably just use sRGB)

  Good luck

  

• Query in SQL to display the count of all the records, but where condition is present

  Hi all
  I have the situation where I have to show number of all records in all the particular period but where the condition type condition must be present:
  
  Please find below sample data:
  PERIOD_ID TYPE MV_COUNT IS_FLAG
  20110401 AM 1 0
  20110401 AM 1 0
  20110401 MS 29 0
  20110501 MS 1 0
  MS 14 20110601 0
  20110701 MS 2 0
  20110401 MS 1 0
  20110401 AM 2 0
  20110401 AM 69 0
  20110401 AM 2 0
  
  Finally, I need to type = MS
  (i) is_flag total count for all periods
  (II) for the period = 20110501 this is the mv_count
  
  I need to use the unique table time (i.e. outer joins self-join not)
  I tried using the partition by clause, but it will filter the data.
  
  See you soon,.
  SP

  842106 wrote:
  Finally, I need to type = MS
  (i) is_flag total count for all periods
  (II) for the period = 20110501 this is the mv_count

  I need to use the unique table time (i.e. outer joins self-join not)
  I tried using the partition by clause, but it will filter the data.

  select sum(is_flag) is_flg_count,
           sum
              (
               case when period = 20110501 then mv_count else 0 end
              ) mv_cnt_for_20110501
  from your_table
  where type = 'MS';
  

• Stop a video of quiz and then have it remember where you left it when you restart

  Is it possible for a user with videos of a quiz on LMS, start a video, pause, or stop, she and then return to the video at a later date and it resumes where it left off?

  I don't think so... I can't see even a way to stop a video and then open it again and have me remember where I left, so I don't think it will work that way in LMS.

  More details:

  The video is about 100 slides and 10 quiz. The user must achieve 80% to pass this course. If the user connects to PeopleSoft, gets the list of course, concludes this particular course and starts the application. It takes about 30 minutes to complete this course. BUT after about 10 minutes, the user is called away.

  What society would like to happen... when the user is called away, perahps they stop the video, sign out of PeopleSoft. It could be hours or it could be another day before the user returns in PeopleSoft, concludes the course and... when the course opens, he remembers that the user left on Blade X, possibly already answered x number of questions, and now it picks up right where it left off.

  I've not found an option for this, and I was not able to make it work when I have a stand-alone project. But... I thought I'd ask anyway.

  Any suggestion?

  Thanks for any help.

  Bernice

  Bérénice, what you ask is called BOOKMARKING and this is a feature common to many e-learning courses.  What happens under the hood is that the lesson of Captivate sends (known as resume data) data for the LMS of bookmark which slide in the quiz that the user got up to.  If the LMS supports this feature (most, but some do not, or do not do very well) then it records the information so that if the person taking the course ends their session and later returned to the same module, the LMS will fuel the bookmarking data back to the lesson, he throws, and the lesson is supposed to go directly to the slide where the user has left the last time.

  That's what's SUPPOSED to happen.  Whether or not it works as expected is another matter.  There are many potential problems.

  If you want to see if your LMS supports this feature, you just need to make sure that the checkbox to never send the CV data in the dialog box customization of LMS is left UNTICKED.

  

  Then republish your courses SCORM, reupload to your LMS and test it by starting a lesson, close and restart again.