Second cell in vCD cluster configuration/license?

Similar Questions

• Problems with newly installed second cell

  Hi all:

  I completed the installation of our second vCloud Director. The installation went well according to the documentation and a few other published materials found cia the "Mighty Google all.

  The VCD services and applications start properly (this has been posted in the cell.log). The problem is that the portal is not responding. It connects, but after a while it does not come.

  If I connect to to the first cell, I see that the second cell seems OK and not registered.

  Any ideas?

  Dennis

  Do you have you open the firewall on cell 2 for port 443 inbound?  RHEL and CentOS block by default.  Otherwise, you could stop the service of IP tables and try to connect.

• VMware cluster configuration

  When adding the second node to the cluster I m getting the errro message "the following nodes cannot verify that they can host the quorum... resource." (hr = 00000000, {B8C4066E-0246-4358-9DE5-25603EDD0CA0}, {A976DC09-0108-410A-AF57-68C05F9A42F7}, 1, 1, 1), (null)

  I have attached the log files.

  And as soon as I turn on the second node of the cluster first machine configuration file value "scsi0:1.present ="TRUE"turns to"False"

  Clustering is not supported on VMware - it cannot share disks - so that's why you receive the warning of quorum. However, under VMware 5.5 and before it works but has need of a bit of configuration I think (google it).

• try to install on the second computer. Already had two licenses, one for the office, one for the laptop. Now try to install the Office composition on laptop. Applications are coming up with buy it now and the start of the trial. Any ideas?

  try to install on the second computer. Already had two licenses, one for the office, one for the laptop. Now try to install the Office composition on laptop. Applications are coming up with buy it now and the start of the trial. Any ideas?

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• Best configuration/license esxi 5

  I'm new to Vmware and I have to deal with 6 guests in my environment. Currently, the hosts are set up with the esxi license 5.0 free stand alone.  I have no shared storage and I wonder what would be the best configuration/license to manage these hosts without shared storage.  Thank you

  To use vMotion without shared storage, you must run vSphere 5.1 or newer with at least 'Essentials Plus' licenses. Remember that the Kits Essentials can manage up to 3 guests, so if you want to manage all six guests in a unique environment you need at least the Standard vSphere licenses.

  André

• Help on consistency + Weblogic Cluster configuration

  Hello
  
  I am new to consistency. I explore the consistency to fill one of my condition.
  
  My needs: I have an application deployed on a clustered server logical Web environment. I need to cache data specific to the application (java card) and that should be available to all nodes in the cluster WLS. Application that are cached, data can be updated from any of the node in the cluster WLS and updated the application cache data should be available for all the nodes in the cluster WLS. The nodes in the cluster of WLS resides in different machines from different places.
  
  Can I use coherence as a services of caching for my requirement?
  
  If Yes, do I need to start a server cache consistency on each node of the cluster WLS?
  
  If so, do I need to specially configure these servers cache, so that these cache servers would communicate each other in case of updates of data in the cache?
  
  It will be very helpful if you could also provide sample configurations to achieve the above scenarios.
  
  Thanks in advance!
  
  Kind regards
  Srinivas M

  You can start a cache server in the network by using for example

  # home directory
  BEA_HOME="/home/oracle/bea"
  export BEA_HOME
  # java vendor (for example Oracle or Sun)
  JAVA_VENDOR="Oracle"
  export JAVA_VENDOR
  # cache server klasse
  CACHE_SERVER_CLASS="com.tangosol.net.DefaultCacheServer"
  export CACHE_SERVER_CLASS
  # coherence options
  COHERENCE_OPTIONS="-Dtangosol.coherence.management=all"
  export COHERENCE_OPTIONS
  COHERENCE_OPTIONS="${COHERENCE_OPTIONS} -Dtangosol.coherence.management.remote=true"
  #COHERENCE_OPTIONS="${COHERENCE_OPTIONS} -Dtangosol.coherence.cacheconfig=WEB-INF/classes/session-cache-config.xml"
  #COHERENCE_OPTIONS="${COHERENCE_OPTIONS} -Dtangosol.coherence.session.localstorage=true"
  
  WL_HOME="${BEA_HOME}/wlserver_10.3"
  export WL_HOME
  BEA_JAVA_HOME="${BEA_HOME}/jrockit_160_05_R27.6.2-20"
  export BEA_JAVA_HOME
  SUN_JAVA_HOME="${BEA_HOME}/jdk160_11"
  export SUN_JAVA_HOME
  
  if [ "${JAVA_VENDOR}" = "Oracle" ]; then
       JAVA_HOME="${BEA_JAVA_HOME}"
       export JAVA_HOME
       MEM_ARGS="-jrockit -Xms512m -Xmx512m -Xss128k -Xgcprio:throughput"
       export MEM_ARGS
  fi
  
  if [ "${JAVA_VENDOR}" = "Sun" ]; then
       JAVA_HOME="${SUN_JAVA_HOME}"
       export JAVA_HOME
       MEM_ARGS="-server -Xmx512m -Xms512m -Xmn256m -Xss128k -XX:PermSize=128m -XX:MaxPermSize=128m -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseParallelOldGC -XX:+AggressiveOpts -XX:+UseBiasedLocking"
       export MEM_ARGS
  fi
  
  # classpath for the cache server
  CLASSPATH="${WL_HOME}/coherence/coherence.jar"
  export CLASSPATH
  
  # start the cache server
  ${JAVA_HOME}/bin/java ${MEM_ARGS} ${COHERENCE_OPTIONS} ${CACHE_SERVER_CLASS}
  

  -Dtangosol.coherence.management = all option gives made you some useful information about what the cache by using for example the browser mbean provided by jconsole or jrockit mission control.

  You can create an application in which you create a cache, below is an example of a servlet

  import com.tangosol.net.CacheFactory;
  import com.tangosol.net.NamedCache;
  
  import javax.servlet.ServletException;
  import javax.servlet.http.HttpServlet;
  import javax.servlet.http.HttpServletRequest;
  import javax.servlet.http.HttpServletResponse;
  import java.io.IOException;
  import java.util.Random;
  
  public class TestServlet extends HttpServlet {
  
      private NamedCache movies;
  
      public void init() throws ServletException {
          movies = CacheFactory.getCache("repl-movies");
          movies.put(10, new Movie(10, "Rear Window", "Alfred Hitchcock"));
          movies.put(20, new Movie(20, "Vertigo", "Alfred Hitchcock"));
          movies.put(30, new Movie(30, "Double Indemnity", "Billy Wilder"));
          movies.put(40, new Movie(40, "Touch of Evil", "Orson Welles"));
      }
  
      protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          Integer[] integers = {10, 20, 30, 40};
          Random random = new Random();
          while (true) {
              movies.get(integers[random.nextInt(4)]);
          }
      }
  }
  

  Package the servlet into such a WAR file and deploy it in a WebLogic cluster configured.

  By accessing the servlet on the different nodes in the cluster a new cache is created and added to the
  already running DefaultServer.

  The most difficult part is to configure your cache. As you can see in servlet initialization we EU something like CacheFactory.getCache ("repl-movies");
  Lack of consistency with some configurations of cache example that are contained in the coherence.jar (coherence-cache-config. (XML).
  The following entry is used

  
        repl-*
        example-replicated
  
  
        example-replicated
        ReplicatedCache
        
          
            unlimited-backing-map
          
        
        true
  
  

  A replicated cache is probably what you need as well. You like all the data available on all nodes. If you want to use
  your own cache configuration, you can add the option - Dtangosol.coherence.cacheconfig (see the for the default server startup script)

  A good introduction on coherence can be found here:
  http://www.packtpub.com/article/installing-coherence-3.5-and-accessing-the-data-grid-1
  and
  http://www.packtpub.com/article/installing-coherence-3.5-and-accessing-the-data-grid-2?utm_source=rk_coherence_abr1_0310&utm_medium=content&utm_campaign=ramsai

• Is ASM cluster configuration, possible to detail all cluster hosts

  In the case of configuration in cluster of ASM (where its possible to create one ASM DiskGroup is shared between all hosts in the cluster) is it possible to obtain information on all hosts (cluster node) (which are part of this cluster configuration) one machine.
  
  For example. If we have three nodes Node1, Node2, and Node3 configured using ASM cluster (i.e. default ASM instance will be ASM2 ASM1, and + ASM3 on these machine) and then I create multiple starts (some shared between all three nodes and bit limited to single node or two) using a set of SAN disk visible to all.
  In such a scenario, can I get the details of Node2 and Node3 comes to log in Node1 (i.e. Since one machine one single node part of ASM cluster configuration, I need information of all other machines/nodes).
  
  Is this possible? If so, some tips on the way which will be a great help.
  
  ~ Stéphane.

  Hi stephane,

  Maybe I'm missing something here, or I'm too detailed, but depending on how General should be your script, there are some steps, you must check to avoid the false assumptions - e.g., as here: "+ to get the CRS_HOME, I can grep for crsd.bin. If I don't get this running process, this means that configurations is a StandAlone OracleDB and turns to the ASM, ASM is too stand-alone instance. + »

  If you can't find the crsd.bin running, it could also mean that it will not turn now - for some reason any. If you find a DSO running instance, but not crsd.bin, Yes, you can generally assume that you would have a configuration of ASM nonclustered (autonomous), unless you run into a BUG / failure.

  Therefore, it might be a good idea to check the existence / first configuration, then to the current process. For example:

  IF you have installed Oracle Clusterware, you will find an init.cssd under /etc/init.d (for Linux, similar directories for other OS). Therefore, check first for the operating system, if you have the OS specific scripts, then just check for the init.cssd init directory.

  The advantages of checking the init.cssd are: you will get the Oracle Clusterware House - it is set as a variable:
  = ORA_CRS_HOME / ora/clusterware AND you usually get the Oracle user: ORACLE_USER = oracle

  Then you can check if Clusterware is running. You will have more than one way to do it now. You can use ps - ef or you can use Clusterware orders as crsctl check CRS or things of that kind.

  Of some people could argue that there is a DSMB for ASM in standalone (non-cluster) ASM facilities running and there is therefore an init.cssd. YES, but this init.cssd shouldn't be in init in this case - see the comment in the header of the script init.cssd: "In a local, nonclustered, installation without CARS, it must be placed in a directory rcX.d".

  However, just to be safe, you can always check whether or not you will find init.crsd, init.evmd, which are very strong indicators that Clusterware has been installed on the system, unless it was not uninstalled properly...

  Once you've found the Clusterware installed, running AND you know the path to the House - it's easy:

  As said previously, you can use olsnodes to get the nodes in the cluster. You can still use crs_stat. It will tell you the ASM / RAC, the instance number and this node the instance number is running on:

  Name = ora.myrac1.ASM1.asm
  TYPE = application
  TARGET = ONLINE
  STATUS = online on pmrac1

  As for CARS DB instances:

  Name = ora.myrac.myrac1.inst
  TYPE = application
  TARGET = ONLINE
  STATUS = online on pmrac1

  To determine which is the node that you are running your script on: host name must do.

  Of course, all this will work only IF you have installed Clusterware. For environments not clustered, you must work with the ps - ef command, sqlplus and oratab file as you mentioned below, which makes it a bit more complicated. We could predict that's SO so OTHERWISE in your script - IF cluster, THEN do foo, otherwise do BLAH. Just an idea.

  For this question:
  Belongs to ASM cluster - (yes/no)
  (If crsd.bin is running, ASM is clustered. Can this method be invoked always?)

  IF you have a cluster installed, ASM should be part - is the default and recommendation. However, you can run in a broken configuration. You want to guess in your script and secure?

  Just a few random ideas. Thank you
  Markus

• Account administrator to configure license - how to

  I tried a cleaning to the top of my registry with software provided by, "AR0211."  I deleted this program. But when I start the computer I get message, AR0211"does not. Also the message "run this program from the administrator account, so it can set up your license." Once defined, you can run from any account. "How can I get rid of these messages?

  After I close this window, the computer works ok. Help, please.

  Hello

  You must have a left over for her boot entry

  Try this

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup.

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  or use this program

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  or how long you originally installed function registry program do a system restore before you initially installed

  but this isn't my favorite way to fix things

  just an option for you

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• VCS Cluster configuration

  I'll put up a cluster between VCS - 02c in version 8.x and one of them will be the captain. I will put all endpoints in the VCS - C Master points, what would happen if the master of VCS - C problems? My end points would be automatically transferred to another VCS - C (backup)?

  Hello

  Setup is a cluster of VCS VCS a set up a Master and others as a slave.

  Your points of termination/Codec must register to the VCS cluster (you need to update your DNS with VCS cluster name i.e. clustervcs.domain.com with the ip addresses of two VCS.  You can use SRV records to do a primary and the other back).  If your CODEC does not support the SRV record then you can put the IP of master VCS and the registration, the VCS Master will provide the idec with its ip address and ip address of the slave VCS.

  A good link:

  http://www.netcraftsmen.NET/blogs/entry/Cisco-VCs-clustering-configuration.html

  I hope this helps.

  Kind regards

  Ahmed

• Transmission of events when Cluster configured

  When clustering is configured all nodes in the cluster is the transmission of events or is - it just address ILB?

  All nodes to do.

• Move cluster configured with replication SRM and Vsphere

  All,

  We go 2 groups in the near future to achieve a geographical distance between the 2 sites.

  A cluster is equipped with VMware 5.0 replication SRM and vSphere and the other cluster running VMware 5.5 and SRM in combination with replication of vSphere.

  What is the best way to move these clusters, I must stop the replication or interrupt the replication process and are these action to perform on SRM or we need to perform any action on the virtual machine itself?

  I read that a stop is setting the State to not configured including destroy all files in the target directory.

  Does anyone have an experience by physically moving a cluster managed by SRM (and replication of vSphere)

  Any help is welcome

  Thank you

  Gerbert Coolen

  Just pause replication before stop you the VR device on the site target/DR. stop vs break with vSphere replication - VMware vSphere Blog - Articles from VMware

• Update ESX4 to ESX5i cluster and licensing questions

  Hello

  I have 2 groups:

  ESX 4 (former cluster) and ESX5i (new cluster), the material is quite similar

  I would like to upgrade (or fresh install) the ESX 4 to ESX5i cluster

  In is it permissible? I have just ESX5i licenses assigned to the new cluster, should I use for the old cluster upgrade? Should I buy new licenses for the new cluster of ESX5i?

  Last question: is it better an upgrade or a new installation?

  Thank you

  LT

  You can consider deleting access to shared storage that you build a fresh or upgrade because it eliminates the risk of overwriting your data warehouses.

• NEWBIE: vSwitch in a matter of the host Cluster Configuration

  Hello

  I'm pretty new to vmware and will be starting my first implementation in the coming days.  I had training and have a very good understanding of what it is I'm doing it but have a few issues of networking.

  If we do not have Enterprise Plus and must use Standard vSwitches on each host in the cluster (using 3 host cluster), that mean each virtual NETWORK adapter configurations on each vswitch hosts will be exactly the same?  So, if I put the vMotion group of ports on host A to use the physical network (vmnic0 and vmnic1) interface cards whose 192.168.10.1 IP address et.2.  It means that I then configure the same IPS for vMotion Port Group (vmnic0 and vmnic1) on host B and C of the host in the cluster?

  If this is the case then wouldn't NIC physical on the three ESX hosts in the cluster need to have same IP configs, in which case wouldn't that cause conflicts of intellectual property, no?   Please advise if I am not clear enough.  Thankx.

  Rick,

  You would need separate IP addresses for each VMkernel port that you are creating.  Thus, for example, if you create 2 VMkernel ports per host, 1 host could avoir.1 et.2, host 2 may avoir.3 et.4 and host 3 can be affectee.5 et.6.

  But remember, you are not assigning IP addresses for uplink adapters (vmnic), you will then assign to the VMkernel Ports.  Your ESXi host will have a VMkernel default port for management (created during installation) which will have the IP address of your hosts assigned management.

  If you create a separate network for vMotion (recommended), this would require a VMkernel port separated with the checkbox "Use this port for vMotion" checked, and who would live on, most likely, a separate vSwitch with its own uplinks.  The VMkernel port would have its own unique IP address.  You will need to repeat this configuration (with specific to host IPs) on each host.

• Consistency of unicast environment Cluster configuration

  Hi all
  
  I have a scenario where I need to set up a cluster of consistency so that it can be used in a cluster SOA or OSB. A BPEL application will be using coherence of cache to store temporary data, and retrieve that data later in the different process. Could you please explain to me what all the steps I have to follow in order to configure the cluster of coherence.
  
  Thank you
  Ankush
  

• HFM Application Cluster Configuration - failed

  Hello
  
  I use the EPM 11.1.1.3 System. The Oracle database version is 10g. When I tried to reconfigure HFM Application cluster via the EMP Configurator, I get error below. I just added the name of the HFM server to the cluster and click Next. Please could you help on this issue.
  
  Error Msg in the log file:
  The server name duplicated SERVERNAME line: 1062 file:.\CHFMConfig.cpp error code: 0 x 0 error: the operation completed successfully.
  The user has been properly set up DCOM limitations
  Try to configure the cluster server.
  Cannot set the application servers and Clusters. Line: 515 file:.\CHFMConfigUtil.cpp Error code: 0x8004082a error: #1578 IDispatch error
  General error. Line: 827 file:.\CHFMConfigUtil.cpp Error code: 0 x 80040815 error: error IDispatch #1557
  
  Thank you
  Michel K

  I removed the name of server in doubles in the HFM_Config.xml file and solved the problem.

  Thank you