Problems with newly installed second cell

Similar Questions

• BlackBerry Z10 problem with newly installed operating system

  Hi guys, so I loaded the latest os and now and I now can not play music, the sound works but I can not get my music to play when I type a song the app closes

  What could do?

  Hi mate did you install a leaked os? Leaked OS are not the official versions, and you have this King of problems... that you can do right now is to re install the operating system and be very careful, even if the procedure do not move the usb cable do nothing! After this check again for the problem hope this works for you!

• Problem with newly installed Namespace 8298731

  We have a number of existing facilities of B2B patched to 8298731 that work properly. Recently, we conducted a clean installation to a new server and it patched to 8298731 as well (upgraded to 10.1.2.3 in the process). It has been configured in the same way as the existing servers as far as we can tell.
  
  The incoming EDIFACT messages since the new server all get 'http://www.edifecs.com/xdata/100' as their namespace. Agreements configured identically with the same ecs/xsd files in the old servers give the correct namespaces, i.e. "urn: oracle: integration: b2b:FA335C8BE96E48F787F88928B5D21132.
  
  Because the same files serve the error should not be in the SpecBuilder/Document Editor. We have not changed the files, but have tried their fresh download both the new and one of the old facilities. The files are fine.
  
  The opatch patches list displays only 8298731 for all environments.
  
  I tried to serve the new environment and configure it again. I dare not quite purge former workplaces in order to test if that breaks, because it would have prevented several development projects.
  
  What could be wrong?

  XEngine in 10.1.2.0.2 oracle B2B is upgraded via 10.1.2.3 patch. We suspect 10.1.2.3 patch could have failed, resulting in the below question. Please re - apply 10.1.2.3 patch and let us know if there is an error.

• Problems with copy and paste cells in Excel 2011 bold (Mac) in Ai CS5

  I have a problem with the copy of cells containing text from Microsoft Excel for Mac 2011 and sticking them in Illustrator CS5. I selects the whole cells of Excel, open a blank document AI, and without anything selected so the format is retained, I paste the cells.

  The question arises with the copy resulting cells in artificial intelligence. The guy who was "BOLD" in Excel's "BOLD" in artificial intelligence... but not really. HERE pastes the text in bold, not bold, but then makes a copy of the same text, put a line on it, then that puts ordinary text, so it seems "BOLD". But now I have two copies of the same word, a regular and a related on it just above the other.

  This normally wouldn't be a problem, but I need to modify this info in here later - and there is a second problem. When I paste the text bold in Excel in artificial intelligence, the word that result is divided into individual blocks of text for each letter. Rather than keep the word in full as an editable text block, I now click on each letter to change.

  There is a catch 22 to these problems: these cells I copy to include bold and normal text and ordinary text pasted in here without any problems (even blocks of text are kept). Therefore, the bold text that is causing problems

  I have a feeling it has to do with how the individual cells are formatted in Excel, but I need to copy the data of many different cells made by several people, so I'm at a loss to know what to do. Help, please!

  I've included a screenshot of what happens with cells after I paste them in artificial intelligence. I moved the exposed '5' to the top, so you can see the '5' on a regular basis below.

  

  Can be as simple as the font you're using. MS products can be a fake fat, products Adobe don't like it.

  I am running Windows, use HAVE 5.1 and Excel 2010 however. I have no problems of collage of paintings and retention of the text in the form of text, "BOLD" attributes and everything.

  So try to use a font that is known for having a "BOLD" Variant or something stock applications such as Calibri. If Calibri works, it may be the police. Here again, don't know if the Mac has Calibri.

  Mike

• Cannot open Word or Power Point Error 1719 also have problems with Windows install.

  OT: problem.

  Hi all

  I used ccleaner, after finishing, I was not able to access to word or ppt... I am getting error 1719 and problems with windows install and I got dnssd missing dll, but I put one in Wow64. I really don't know where the problem lies... I tried everything from softbooting to sfc/scannow... I have windows 7... I copied the log on the desktop and I noticed this repetition:
  CSI 0000032 b [SR] could not check component of 6968173078fa737442bd424a51db3e21 files, Version = 11.2.9600.16518, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, neutral, TypeName neutral, clear PublicKey is damaged (REAL)

  but I do not understand... Someone help please urgent.

  I used ccleaner

  -> Why would you do that? CCleaner is known to cause problems!

  After finishing, I was not able to access to word or ppt

  ->, You might be able to repair the damage with the system restore. It allows setting up Windows to a point before using CCleaner.

• Having major problems running newly installed Phtoshop CS5

  Having major problems running newly installed Phtoshop CS5 on a newer, much more powerful computer that will benefit better large files published on CS5. When I try to run it, I get the message "Adobe Application Manager required to start your trial is missing or damaged. Please download a new copy of AAM... "I made this withoiut effect. I uninstalled my purchased version and installed the "download version" of Adobe's Web site. NO luck. I get the same error message. AM I supposed to buy in Adobe CC and chuck my purchased version CS % or is there a work around for this problem?

  Have you tried to download it from:

  Download the CS5 products

  The error message is that this installation is corrupted.

  Concerning

  Stéphane

• problem with once installed Comfortaa

  Hello

  As the title says I have a problem with the installed versions of the time via the option hosted in muse.

  The police seem fine in design mode, but it does not when preview/export.

  I can't find a solution via google search.

  I'm a bit of a hurry, so any help would be really useful.

  Thanks in advance.

  EDIT: I noticed now that it works ok with engligh but not with the Greek. I still can't get it to work.

  Home page , you can see the police in the foot as a police system and "NEA PROIONTA" where it does not work as expected.

  I tried to check the location and the font used, seems to end of the homepage shows fonts same font you used in the (Comfortaa) design.

  I think that the problem is solved?

  Thank you

  Sanjit

• Cannot install ITunes error 'problem with windows install.

  Original title: try to install iTunes - says the problem with uninstalling windows package - a program required for this install... could not be executed. HELP - everything tried

  I have windows vista - quick time is newly installed, but can't get iTunes to install - help

  Hello
  1. is the question confined to the ITunes?
  2 are you able to install other programs on the computer?
  In the case where the issue is limited to the installation of ITunes, you can check that the links to Apple support provided below to solve the problem.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/ht1926
  Cannot install ITunes and QuickTime for Windows without Visual Basic Script (VBScript)
  http://support.Apple.com/kb/TS1331
  You can get in touch with support for ITunes to get help.
  ITunes support
  http://www.Apple.com/support/iTunes/

• Cannot install error matix web: problem with windows install.

  Original title: install windows package

  Hi, I was wondering if someone could help me, not used webmatrix for awhile and I put on and its not responding do not, I tried to re download and no luck, from the web, platform installer it returns constantly so I had a problem with the windows package install. Please can someone help?

  I use microsoft web platform install 3.0

  It fails when I try to install and a message appears

  ASP.NET web pages

  This product has not been installed successfully. There is a problem with this windows package install. a program run as part of the Setup did not finish as expected. Contact your provider to support personal or package.

  ASP.NET web pages language packs

  This product can not be installed because a failure that it was not installed successfully.

  Microsoft webmatrix.

  This product cannot be installed because a prduct which it depends have not installed successfully

  Hello

  1. What is the message exact error do you get when you try to install the web matrix?

  2. where did you download webmatrix?

  I suggest you to try the steps below and check if it helps.

  Verify that the Windows Installer service is running or not.

  Start the Windows Installer service.
  a. Click Start, type services.msc and press to enter.
  b. in the list of items, double-click Windows installation service.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click on apply and then click ok.

  e. restart the computer.

  Check whether the problem is resolved.

  Hope this information is useful.

• Problem with Windows install. Error 1723. ___

  Hello. I am running windows 7, try to install the latest version of Java. Failed to install, I get the following error message:

  Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact you staff support or package of the seller.
  I have already searched the internet for a solution and have tried a number of things that have been proposed, including:
  -try "offline" installation of Java.
  -cleaning the registry with CCleaner.
  -try to uninstall any failure installs with Windows Installer Clean Up-> no installation of Java have been found.
  None of these suggested solutions have solved my problem.

  Hello

  ·        When you did a SFC scan, do you have any system messages from violations of integrity?

  ·        Were you able to install and uninstall all programs on the system before?

  Installation can be terminated prematurely, or there may be a fatal error during installation. Windows Installer error 1723 occurs because Windows Installer cannot start the source files for the configuration of the software application you are trying to install. These files may be missing or damaged. In general, the original MSI installation files will be cached in the ' C: winntInstaller directory before installation begins. Inappropriate caching of a file MSI is main causes of errors, too.

  Try the following to correct the setup of Windows 1723 error.

  a. to correct this error, you must ensure that you have the latest version of InstallShield. If this isn't the case, then update to correct the error.

  b. If the installation cannot find the necessary files, try using the search function of the window to locate the files and specify the location for the installation process.

  c. you must log on as an administrator before installing.

  d. If you install on a network, make sure you have full access to the network location where the installation is running.

  e. try the reinstatement of Windows Installer.

  I suggest you to check the below link.

  Error 1723. There is a problem with this Windows package install.

  http://www.Java.com/en/download/help/error_1723.XML

  ·        The place where you try to download java?

  I suggest you to download java from the link below and then checks to see if you are able to install it on the system or not.

  http://www.Java.com/en/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with re - install Windows 8.

  Original title: WINDOWS 8

  Hello

  I have a copy of windows 8 current running on my home pc, but I have problems with the PC, I need to reinstall windows 8 on another pc, I can do it without breaking the rules?

  Hello

  If you have a copy of Windows and installed on several PC, activation may not work because the product key has already been used on another PC, or it is used on PCs more than to let the Microsoft software license agreement. Normally, the rule for most copies of Windows is 1:1, which means that a copy of Windows can be installed on a single PC.

  If your product key is used on PCs to let the Microsoft software license agreement, you will have to purchase a product key for each of your computers in order to activate them.

  Check out the link for more information.

  Why can't I activate Windows?

  http://Windows.Microsoft.com/en-in/Windows-8/why-activate-Windows

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• ESX 4.0 problem with post install in kick start.

  Hi all

  I have problem with writing a script for starting a esx4. Everything works OK until I try to enable vmotion. my kickstart script looks like:

  AcceptEULA

  keyboard us

  AUTH - enablemd5 - enableshadow

  1. Names of canonical readers:

  clearpart - overwritevmfs - drives = mpx.vmhba0:C0:T0:L0

  1. Uncomment to use the first detected disk:

  #clearpart - firstdisk

  1. Uncomment the esxlocation line and comment out the clearpart

  2. and physical partitions to do a non-destructive reinstall.

  #esxlocation - uuid = 2be8278c-007 b-4389-947f-0f6a72a23036

  install the cdrom

  rootpw - iscrypted $1$ fh40NuLv$ jo1FUrvpfHEXHINgANoEj.

  time zone hours utc-"Poland".

  network - addvmportgroup = true - device = vmnic1 - bootproto =-= 192.168.10.10 static ip - subnet mask = 255.255.255.0 - Gateway = 192.168.10.1 - nameserver = 192.168.10.1 - hostname = test

  part "/ boot" - fstype = ext3 - size = 1100 - ondisk = mpx.vmhba0:C0:T0:L0

  1. Uncomment to use the first detected disk:

  #part ' / boot ' - fstype = ext3 - size = 1100 - onfirstdisk

  the game 'none' - fstype = vmkcore - size = 110 - ondisk = mpx.vmhba0:C0:T0:L0

  1. Uncomment to use the first detected disk:

  'none' - fstype = vmkcore - size = 110 #part - onfirstdisk

  part "Storage1" - fstype = vmfs3 - size = 8604 - grow - ondisk = mpx.vmhba0:C0:T0:L0

  1. Uncomment to use the first detected disk:

  #part 'Storage1"- fstype = vmfs3 - size = 8604 - grow - onfirstdisk

  VirtualDisk "esxconsole" - size = 7604 - onvmfs = 'Storage1.

  part 'swap' - fstype = swap - size = 600 - onvirtualdisk = "esxconsole".

  the part "/ var/log" - fstype = ext3 - size = 2000 - onvirtualdisk = "esxconsole".

  part ' / ' - fstype = ext3 - size = 5000 - push - onvirtualdisk = "esxconsole".

  % post - interpreter = bash

  esxcfg-vswitch - L vmnic0 vSwitch0

  esxcfg-vswitch - D "VM Network" vSwitch0

  -A ' 64 VLAN' vSwitch0 esxcfg-vswitch»

  esxcfg-vswitch - a "iSCSI" vSwitch0

  esxcfg-vmknic - an "iSCSI" 255.255.255.0-i 192.168.10.11 - n

  esxcfg-road 192.168.10.1

  esxcfg-road - a by default 255.255.255.0 192.168.10.1

  service mgmt-vmware restart

  sleep 5

  / usr/bin/VMware-vim-cmd hostsvc/vmotion/vnic_set vmk0

  service mgmt-vmware restart

  When I run the command/usr/bin/vmware-vim-cmd vmotion/hostsvc/vnic_set vmk0 after installation in ssh allows vmotion, but when it is run by Setup in the % post section that's not what I'm doing wrong?

  Concerning

  Zbyszek

  I did a startup script and it started working.

• Photosmart D110: Problems with re - install

  I uninstalled the Photosmart D110 my computer to try to fix a problem with another computer in our household is not able to connect wireless not think that might help solve the problem. Instead, it has been a nightmare for reinstall. I tried to follow the suggestions on the HP site, nothing helps. I continually receive the 1706 error after restarting my computer. When I try to re - download the driver software, I get the error message "key not valid for use in specified state. Please help with a solotion for this problem. Thank you

  Ok.

  Indeed the DocProc component seems not related with the D110 model, have you had any previous HP model?

  If so what model was it?

  I guess it's in conflict with some old reminder of HP software

  In Control Panel, select programs and features, then type HP in the search bar.

  How many HP applications do you see? a list of these items could help.

  Try the link below and click Run now:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Of the screen, select apply automatic difficulty, and then select uninstall.

  Look at the list, if there is no article listed as DocProc uninstall.

  Once you're done open the temp folder, as described in my previous post.

  Open the installation folder, then the Scan folder and select Repair for Scan.msi.

  Once you are restarting your PC and try to scan the image.

  Please let me know if that can help you, otherwise specify the above information.

  Shlomi

• Problem with CS6 installing on the new laptop - 'SN is ok, but your software is probably illegal.

  I have an urgent problem with the Suite Design Standard CS6 installation on the new laptop - comment: "SN is ok, but your software is probably illegal". Software has been disabled on the old laptop. Help, please. Thank you. Marek

  We cannot help with this type of problem on the forums. Serila number questions should be handled by the customer service: Customer Contact

• Printing with newly installed HP printer problem

  I just replaced my old hp printer with a HP Photosmart Premium Scan, copy, print, Fax C410a. I use PE8 and Windows7. Everything was good before.

  When I try to print from PE8, the printer wants to send a fax instead of print the image. I am able to print the same image properly from Picasa. I checked my setup of the printer and everything seems OK.

  Also has anyone seen this problem? Any recommendations?

  I'm tempted to uninstall/reinstall PE8 but here I check everything first.

  Thank you!

  You could try tweaking the name in the properties or print from the organizer rather than the editor. Another user of the forum found it worked.

  http://forums.Adobe.com/message/3484932