Seconds for conversion hh

Similar Questions

• Distiller will suddenly end/crash the * SECOND * time I open a file for conversion to PDF.

  The subject says it all: Distiller will suddenly end/crash the * SECOND * time I open a file for conversion to PDF.

  But I think I have an idea why this is happening. In general, I use Distiller to convert EPS or PS files as PDF files. In addition, almost without fault, I incorporate the required (only of Type 1) fonts directly in files EPS/PS (using the required format to PFA) so no local fonts on my computer are needed to be looked at to distill in to be embedded in the file PDF. they are already in the EPS/PS files.

  But yesterday, I tried to convert EPS/PS files to PDF using Distiller in which I had NOT embedded fonts Type 1 (PFA format, of course) in the source of EPS/PS files. All first this conversion would work (in which I select "open" and choose an EPS/PS file for conversion), but after this initial conversion, the * SECOND * time I clicked "Open" the file, Distiller would immediately close/crash.

  Then, I searched the web for answers and discovered that some people have trouble distilling to initialize if all their computer system fonts were read-only. So I went back to my EPS/PS files and embedded fonts Type 1 (PFA format) required in them and then - as if by magic - distill worked without a hitch: I could open and convert any number of them in succession, with distilling never close / crashing.

  Then, I found the reason why distilling had been crashing at the second attempted to open a file (once again, simply by pressing the "open" button to find a file to convert, * no * after selecting a file) must have something to do with distilling scanning fonts installed on my computer, when there was no PFA font incorporated to make reference to , and a read only font on my system was the cause of the problem. However, I have looked in both places of logic where my fonts must be located (c:\psfonts and c:\windows\fonts), but found * no. attributes * files fonts defined in 'read only' so, I'm stumped.

  I use Distiller Pro 10.1.1316 (acrodist.exe) on a machine to earn 8.1. I found similar positions, which dates back to 2004, about Distiller crashing immediately after opening when certain fonts are read-only; I haven't found a post about anyone successfully using Distiller to convert EPS or PS to PDF and then have the program crash when the "Open" button is pressed subsequently. The clues, anyone?

  Background: Distiller Server is a product discontinued long - ago - use of Distiller server is now simply prohibited, and LiveCycle PDF Generator is available for servers.

  Since you are not using Distiller Server and this forum is essentially abandoned, I recommend that you try the Acrobat - forum creation (etc.) instead.

• I upgraded to firefox 3.6 recently 11, but firefox11 works well with my windows 7. It became slow and strucks on for 6 seconds for each click.

  11 Firefox hangs frequently for about 6 seconds for each click as switching between tabs, closing tabs, opening new tabs.
  by clicking a link etc,
  3.6.17 worked well, but 11 Firefox is too slow.
  problem is the same with version 4 and 4.01
  can someone please help me to solve my problem

  I'm sorry that you have problems with Firefox doesn't work is not as fast as it should. I'd like to help you here so that you manage Firefox running at great speed.

  Firefox, try to start Firefox in Safe Mode. It temporarily disables your extensions, customizations, etc. so that we can see if they slow down Firefox. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker. Once you do, you can disable this add-on.

  I also see you have advise McAfee Site. I would recommend disabling that, as it is known to cause leaks of massive memory than Firefox slow down

  If Safe Mode does not work, you can also try updating your graphics card driver. Update your graphics drivers to use hardware acceleration and WebGL reading can show you how to do this.

• Write the measurement data in text file every 10 seconds for a duration of 2 seconds, creating a new file every time.

  Greetings,

  I'm working on an application for the acquisition of data that runs constantly and need to record data at intervals of 10 seconds for a duration of 2 seconds.

  On each interval recording, I have to create a new file that contains a number of journal in the name of the file (Test_1.txt, Test_2.txt,...);

  and add to the current time and date on the header of the file.

  My question is how can I do this with what I have so far?

  The attached vi is a notion of what I am trying to accomplish. The application also has the DAQmx read functions in the vicinity while loop.

  and a few manipulations of data. Apart from the main loop, I create and launch tasks DAQmx.

  Thank you for your help.

  Best regards

  Matej

  Hello

  Thought this one myself.

  Here is the solution, if anyone needs something similar.

  Best regards

  Matej

• "laptop HP 2000: why should I keep my keys for a second for my keyboard display what i type.

  "Why should I keep my keys for a second for my keyboard display what i type.

  Hello

  Check the following points.

  From the windows control panel, open the ease of access Center and click on the link "make the keyboard easier to use.  If there is a check mark in the box beside 'Turn Sticky Keys' or ' turn on Filter Keys, Remove these and then click on apply to apply the change to see if that solves the problem.

  Kind regards

  DP - K

• Menu widget never answers 8 seconds for 8 seconds

  Hello

  I bought model Muse and I build websites with Muse CC (2014) (www.janka-photograhy.ch)

  This is a template page with scroll effects on it.

  On each page, with the exception of home' I have the horizontal menu widget. Now, on the next page (über mich)

  menu stops responding after 8 seconds for 7-8 seconds and then work normally again for

  8 seconds and so on. This only happens on the page "über mich. On other pages (offer, Gallery, Kontakt)

  everything works fine. No idea why this phenomenon occurs?

  Thank you very much.

  Dalibor

  PS Is the problem arises in Firefox but not in Internet Explorer.

  Hi mac_heibu, thank you very much for your answer.

  I solved my problem. It wasn't widget, it was one of the images of tree on the location of the HOUSE, which was too large (in height).

  Now everything works well, and the menu is very fast and responsive.

  Best regards

  Dalibor

• 15 seconds for the archiving of newspapers is acceptable?

  Version: 11.2.0.3
  Platform: RHEL 5.4
  
  3-node RAC
  DB in ARCHIVELOG mode
  
  Question1
  ============
  
  As you can see below sometimes it takes up to 15 seconds for the archiving of recovery logs.
  
  Online redo log switch happens fast however. It takes less than 2 seconds (maybe not fast enough for you guys)
  
  Is this acceptable?
  
  
  

  --- Log archiving is slow
  
  SQL> set timing on
  SQL> alter system archive log current;
  
  System altered.
  
  Elapsed: 00:00:11.08
  SQL>
  SQL>
  SQL> alter system archive log current;
  
  System altered.
  
  Elapsed: 00:00:10.77
  SQL> alter system archive log current;
  
  System altered.
  
  Elapsed: 00:00:15.06
  SQL>
  SQL>
  
  -- But log switching is fast !
  
  SQL> alter system switch logfile;
  
  System altered.
  
  Elapsed: 00:00:01.89
  SQL> alter system switch logfile;
  
  System altered.
  
  Elapsed: 00:00:00.21

  Question2.
  =========
  
  For a database in archivelog mode, ALTER SYSTEM ARCHIVE LOG CURRENT and ALTER SYSTEM SWITCH LOGFILE have the same effect. Right? I mean, these two commands request the process archiving to archive the ENT which is currently written to. right?

  It's fast enough, as long as you don't fill all redo it online until you have completed check-in first. This is a round robin, so if you get all the way around to the first which is still more archived, everything stops until it is done.

  The ALTER SYSTEM ARCHIVE LOG CURRENT expected archiver finish archiving, is slower than ALTER SYSTEM SWITCH LOGFILE, perhaps very much so with the largest and redo.

• Formula for conversion signal strain gage

  Dear forum users and employees of OR,.

  I'm fighting to check a formula used by DAQmx and LabVIEW for the conversion of a signal pledge of strain to the mechanical solicitations.
  Formula for strain is "eps" (type of full-bridge III: 4 elements, 2 x 2 in the same sense sequence):

  SPE =-2 * Vr / (GF * [(nu + 1) - Vr * (nu - 1)])

  See also '10. Full bridge III"here: http://www.ni.com/white-paper/4172/en/#toc10

  But if I try to reproduce this formula based on figure 1-15 in the page web related, I can simply this:

  VR = Vch/Vex = 1 / 4 * GF * (- nu * eps + eps - nu * eps + eps)
  => eps = 2 * Vr / (GF * [1 - nu])

  So either I make a mistake, either the formula given is faulty. The other formulas on the linked web page didn't quite work for me neither.
  As reference, take a look at this: "full bridge, 2 grids of longitudinal-2 cross, second to the last entry on this page:

  me-system/dms-bridge

  The formula NOR mentioned can be found here as well:

  NOR: Full-bridge Type III

  NOR: LabVIEW 2013 help Convert gauges read VI

  The formula I got for "eps" was posted by the employee OR in a different context (with a negative sign):

  post on the Forum

  Can someone there explain further?

  Good day!

  Hi Wimba,

  the formula that you describe is for folding (Type II) and not for the axial deformation of (Type III).

  You must take into account that the voltage should be descriebed in the form of the restistors report.

  See the Wheatstone bridge for that.

  Hope that helped.

  Anna

• TB was quick and sensitive for a few months, now it says "not responding" constantly for about 60 seconds for each email load.

  Used to be 'ready' for a few seconds and I could click to e-mail without delay. Now, each e-mail takes a minute because TB says "not responding". Then displays the email. But when you click on the following e-mail, the same thing. So instead of clicking quickly through e-mails, it takes ten minutes to watch ten emails. I have not changed the operating systems or updated my computer but I let the updates of windows install. Always have.

  meet https://support.mozilla.org/en-US/questions/1039145#answer-671603

  You can try the options here https://wiki.mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues

  Personally, I recommend that you contact the McAfee support so they can fix your installation. (They connect remotely, then make the changes for you)

• Anyway to create a duplicate application (second) for the App Store?

  I want to add a second icon of the App Store.

  .. .for another area of my desk.

  IS this possible?

  No, but you can move down to the "dock (bottom line/bar of apps" and then it will be available on all screens welcome. - AJ

• Ghostery addon causes 100% CPU load on a carrot for a few seconds for each hyperlink that you clicked.

  For many months now and with several versions of Firefox and firefox profiles, turning the Ghostery add-on causes each hyperlink clicked to have 2 second break. In the Task Manager, I see 25% cpu usage, which equals 100% of CPU on my Quad Core cpu load.

  If I disable Ghostery and restart Firefox, all problems disappear. So I have either the choice between a slow browser, or privacy-enabled navigation. Both are unacceptable.

  I can't find anyone with this problem; is it me?

  I did not use of Ghostery but I guess it could be the preload page and inspect and possibly break URLS to protect you before posting. Maybe if you set the settings so that it does less, allows you to balance the objectives of performance and privacy?

  I noticed this on their support site today: https://getsatisfaction.com/ghostery/topics/your_script_becomes_unresponsive_raising_hell_with_firefox

• Break every 2 seconds for writing on hard drive of the computer.

  Run LV2010 on a machine W7 Pro 64 bit CPU i5-2500 3.3 GHz and 8G of RAM.  The machine is around the age of 6 months.

  I have a request I'm reading from a USB device and write to the hard disk.  The USB device does not know when my application writes to the hard drive, so I really doubt that the problem is there anywhere.  My application continuously collect and graph data from the USB device.  The device has a tampon in it and the State of the buffer is sent upward with the data contained in each package.  The State is still weak, because the computer has no trouble to the read buffer faster that the unit can charge upwards.  In other words, unless the PC is writing data to the hard drive.  When this happens, it works perfectly for about 2 seconds, then the buffer fills completely shot and overflows, then he just read more quickly down to zero.  This happens again and again, to repeatable intervals, which are about 2 seconds apart.  The only reason that would cause a buffer overrun, is that the PC is not read it fairly quickly.  On the slower computers of the past, I'd like to see that happen as the buffer would inch its way up slowly, when the PC was just too slow to keep up.  At the time it happened, record HD or not.  In this case, it comes quickly, and back down, as if the PC just took a short coffee break.  I even set the priority to high hoping the BONE would not pause, but alas, it makes no difference.  Does anyone know why a PC would do this during the recording of HD?  Thank you.

  Is the code that is written on the hard disk in the same loop that acquires data?  Writing to the hard disk will always be slower than the other processes in the PC.  Your postal code so that we can see what you're doing.  You should use a producer/consumer architecture to transmit data through the queues of the loop for the acquisition of data for the file write loop.

  Is it possible that this PC has anti-virus running on it is taken way too long to analyze all the files the PC's hard disk?

• ProBook 6450 b-Win7 freezing intermittently - every 3-4 seconds, for a fraction of a second

  Hey,.

  My Win7 64 bit 6450 HP ProBook b continues to stop responding (as if the gel) intermittently - for the fraction of a second after about 4 seconds.

  Although he retains receiver input, for example if I type, nothing appears on the screen, but as soon as he comes back to life, everything they touch I pressed on will show on the screen. Same thing is on mouse clicks - say, I click on a tab in the browser, it will not pass here (or if I click several times, it shows even "not responding"), but after it becomes active, the right window will be shown, or Ctrl + F appear after slight delay. The most annoying side effect is frequent disturbances on web-surfing (probably because that when submitting the query retrieves the service goes dead!).

  He got a freshly installed Windows7 (only five days) and I ran Windows Update as well. It's a working machine, and VS2008 is the heaviest software there... Apart from that he has MS Office, a couple of browsers, code - compare, Messenger, etc., our own software and do not forget the antivirus as well.

  --> Yes, I turned off all unnecessary services, and put into service is obtained only the necessary applications, but for some reason I dared not stop / uninstalling HP services etc... Could be the culprit?

  --> Yes, I put the Windows configuration for optimal performance (for programs).

  --> It does same when nothing works, for example to test, after the reboot, I opened Notepad and start typing... the problem was there.

  --> In safe mode (I checked with the networks on), he did not show it.

  --> chkdsk /r and sfc/scannow said NOT everything was bad.

  --> I tried to look at the resource monitor too for awhile (for memory), but it no never come in red color.

  --> (Again...) Only the "necessary" services are running, everything is disabled / stopped.

  It's a HP ProBook M520 6450 b, Intel (R) Core (TM) i5 CPU, @2.40 MHz 2.40 GHz, installed Memory (RAM) 4.00 GB (3,80 usable), having a 64 bit Windows7 professional.

  Any help, advice, suggestion would be great.

  Thank you

  Yogesh

  Hey...

  As noted in any other forums, it came out as a hardware problem. Replacing my hard drive fixed it - now my ProBook and Windows7 - both are worth the money paid for it.

  I had done almost everything - stopped all services, almost all uninstalled, but still the problem persisted. This one is a work laptop and only solution given by our IT team (to the problems that you can't solve yourself) is to format and reinstall everything, whereas I was looking here for some advice on this site saner. But then one day even start Windows stopped (started taking hours and days), I had to go, and told me that the hard drive of my 3 weeks died / is dying.

  They replaced - new hard drive and a new Win7. I lost some data, but have found my peace (and speed)!

  Yogesh

• What is Microsoft's best practices and utilities available for conversions P2V and V2V for Hyper-V, without using SCVMM?

  As a Partner of MS we recommend Hyper-V as the platform of choice virtualation for our SME customers. What does Microsoft recomemend and are available for P2V and V2V for Hyper-V conversions without using SCVMM most SMEs do not have access to

  concerning

  David

  Hi David,
  I advise you to post this question using the link below.
  TechNet is for the professionals of the company and the server, so I don't know that anyone in this community will have some information about this.
  http://social.technet.Microsoft.com/search/en-us/?refinement=112&query=P2V%20and%20V2V%20conversions
  B Eddie

• my firewall has been shut down for a few seconds for weeks - is this a virus?

  I am running windows XP with SP3, and for weeks, I get a message that my firewall is disabled, but a few seconds later, it is again.  Is this some malware problem that cannot detect the MSE?

  Hello

  1 did you changes to the computer before the show?

  2. you receive an error message?

  3. do you have another firewall installed (non-Microsoft) program?

  4. which antivirus program is installed on your computer?

  This problem may occur if the Windows Firewall service is stopped or if all the non-Microsoft Firewall program is installed.

  I suggest you perform the steps in the following procedure.

  Security Warning: the Windows Firewall is disabled

  http://support.Microsoft.com/kb/2288085