Secure computer room
I want to build a new computer room and I want to find the safety standards for it (for example laying floor etc.). Cisco must it all guide ho this? I remember some earlier versions of the CCNA curriculum had some standards but I can't find them. Can anyone help?
Thanks in advance
The following link might be useful
http://www.Cisco.com/en/us/NetSol/ns206/networking_solutions_white_paper0900aecd80122977.shtml
M.
Tags: Cisco Security
Similar Questions
-
Hello
We have purchased licenses for a computer room. I want to know the procedure for installation.
I could not affect any license for a single user. Why?
Thnak you for your response.
Best regards.
Alain,
I checked with your account.
You must assign each user to a license, and then they can download the CC apps through their account from Adobe.
Please see the help document:
Using creative cloud | Creative cloud to teams
Kind regards
Sheena
-
Security computer analyzed online company and the computer is not the same as before.
Original title: microsoft tech 35?
I had a security scan my computer online company, they said they found like 35000 problems. They said that many of them were only a technician 35 microsoft able to solve questions. I told them that I wanted my money and they wanted to charge me another 350.00 to fix. My computer is not the same as it was before, and I would just it back as it was. I tried to restore to yesterdays configuration, but it is not the same... Please help!
Sunday, September 23, 2012 15:06:37 + 0000, nickguthrie wrote:
I had a security scan my computer online company, they said they found like 35000 problems. They said that many of them were only a technician 35 microsoft able to solve questions. I told them that I wanted my money and they wanted to charge me another 350.00 to fix. My computer is not the same as it was before, and I would just it back as it was. I tried to restore to yesterdays configuration, but it is not the same... Please help!
Why do you have do this them? Have you contacted them or the fact that they call
you?If they call you, it's a scam and with various names and phone
numbers, who becomes very common lately.In addition to their money get on your part to do anything of any value,
If you leave them in your computer, which knows what losses they did are
where confidential information they stole.So if you have done so, I highly recommend that you do both of the following
immediately:1 do a clean reinstall of Windows.
2. change all of your passwords, especially banks or other
financial sites.
Ken Blake, Microsoft MVP -
Workflow to set the field of AD description and computer rooms
Hello
I would like to create workflows a little whole AD and local description of the computer.
If anyone has an idea...
Thanks in advance
Please review the scriptable task, entries and links the workflow attached that I created when initially answered your question...
You can import the workflow attached and test / modify it as you wish.
Entries of workflow:
computerAD (AD:ComputerAD) - is the computer object in the plugin announcement that will have its amended description field
newDescription (string) - the new value of the description of the selected computer object
Script task:
The entry script task has both entries of the workflow associated with it to access these values within the script.
-
someone sent us emails attached to all our contacts & emails were apparently not very nice. I changed my password on hotmail. I can't get into my computer, he repeats to me reset password that I did several times & then it says wrong password & user ID. I do not change my sign computer password, just my hotmail, please help because I don't want to pay someone in the computer to resolve this problem. I did change my password, can someone please check this & difficulty? I am very frustrated because I cannot get help & sent emails several times.
Thank you
L. Giffin
Hi Darrell,
Try to connect to an administrative account to change the password. Take a look at the next thread for some suggestions provided by MVP, COMPUTER skills
Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.
-
A person or group has taken over my computer
A few years ago, I downloaded accidentally malware/trojan/virus through a flash update. My internet has sent almost as much as she gets slow my computer down to ridiculous. A few years ago I enabled hidden files and found a whole bunch of very strange file names starting with $ and extremely long numbers. For example, $NtUninstallKB2655992$.
I looked into some of these hidden folders to find text files with a very strange, as the rectangles and something like nAuN dirty as a name in it.
There are 39 just in my Windows folder. In addition to a folder called $hf_mig$ who has stored all my XP system updates and, perhaps, since it happened. There are 38 updates since 10/10/2012 in there. Files named something close to KB2724197 are listed in there. I guess they are updated because they have almost the same name as the updates of today that I was not allowed to install.
Last night I started in safe mode to change the privileges on files hidden as a RECYCLER. When in safe mode, I clicked on RECYCLER to change the admin him. When he wouldn't let see who was the owner, I started to look around. In the box, there is a list of privileges to assign read/write, etc. But "special permission is grayed out. As I have gone through and created a new user for my self, I found this list of users;
ANONYMOUS
Authenticated users
BATCH
Dan (me)
DIALUP
Everyone
Comments (deactivated)
Guests
Help Services Group (deactivated)
Help Assistant
INTERACTIVE
NETWORK
SERVICE
SUPPORT_388945a0
SYSTEM
Terminal Server user
User (has been disabled)
UsersI was unable to make changes when you try to remove users from this file. When I tried the error message showed a path? \C:\RECYCLER, you do not have sufficient privileges to make changes.
Éventuellement par le biais de fouiller, j’ai pu voir le propriétaire de celui-ci, qui était de 5-1 - 5-21 - 1205666252-1506235805-1800150966-55846
Note aside, everything first, I realized something was wrong years when I found that Audacity could not use my microphone or adjust the volume in my controls.
So, what is with all this?
At this point, you have to assume that all of your data and personal information on the computer is compromised. You must ensure that your credit cards and other financial accounts have not been fraudulently used. Use a secure computer known to replace your passwords online. If you have already used an online credit card, call the credit card company and request a new account number (explain that your computer may have been compromised - they should treat it simply as a lost or stolen card).
Reading this, especially the last paragraph--> http://technet.microsoft.com/en-us/library/cc700813.aspx
Contact your computer manufacturer and ask them to provide you with a way to reinstall Windows. If they cannot help you, ask the computer lab (or a renowned local independent repair store - not a store chain) and ask them if they can re-install version authentic Windows XP for you. They may or may not be able to do, depending on what the media available to them and that the label of certificate of authenticity of Windows XP on your computer can be read.
Overall, it may be cheaper to purchase a new netbook. You will not be able to get one with XP, however. You will probably have to get used to Windows 8 or Google Chrome.
Really, the alternative to reinstalling Windows or buy a new computer - and it is not a good alternative and is not guarantee of success - advertising interactive help in one of the specialized forums malware removal I listed before.
Although it is technically possible that your BIOS is infected, it is very likely (unless you live in China). A rootkit BIOS named Mebromi appeared a year or two ago, but it can only attack computers that use BIOS code produced by a specific vendor.
-
There are only 2 users, me and administrator accounts, requiring passwords to connect at startup XP, I would like to know whether that sufficient safety never leave anyone access to my hard drives the?
The guest account has been disable, is there another approach to access my HARD drive in XP? I'm not about physical remove my HARD drive in another computer. I'm only security on my computer.
In addition, how can I test if the administrator password has been set or not? How to connect as an administrator?
Does anyone have any suggestions?
Thanks in advance for your suggestions
Hello
If you have the password for user accounts, then it is not possible to access the hard disk without entering the password.
For more information on Secure Computing using Windows XP, see this link:
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/security_ht_comp.mspx?mfr=true
To access the administrator account, you will need to enter the password that is defined for the admin account and then you can register as an administrator.
It will be useful.
-
I have Security Essentials but MSN warned me: there is no active antispyware. Can someone explain?
Security Essentials is on, but when I try to connect to the internet with MSN, my ISP, appears a warnining on no antispyware and I have to click "continue numbering".
More info: I use a computer with Windows XP Edition emachines family and 512 MB of RAM.
Take a look at this article
-
I bought a used laptop and the previous ovner couldn't remember his password since it's been more than a year she opened a session. How can I clean the computer and restore it to that only programs that comes with it when buying or facotry settings. It's a HP Pavilion dv4000 with windows xp? I have not all discs.
Go here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006110&tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=464513 and click on the link that best matches your computer (e.g., Presario, Pavilion and HP Compaq Business PC manufactured and sold in 2006 or later).
Assuming that your computer is 2006 or later, following the links eventually will lead you to the following directions:
Reformatting a hard drive should be considered a last resort to solve a problem with a computer system. The hard drive can be reformatted and reinstalled the operating system, using the system PC Suite hard disk recovery. Reformatting the hard drive will overwrite all data on the disk. To preserve the data, back up the data of the user as; letters, leaves of calculation, graphics and emails to an external storage device before you reformat the disk. If the PC does not work in the Windows operating system, see reformatting since the recovery disks .Do the following to reformat the hard drive and reinstall the operating system.- Connect the PC to the power adapter.
- Close all programs.
- Click Start , click principally made programs , select System Restore and click on the PC recovery .
- When the recovery options are offered, select the option to perform the Recovery of PC and click Next .
- The PC will restart.
- When the recovery of the PC of welcome message, click OK to continue.
- In the system recovery Panel, select System Recovery . By default, the system will perform a complete reformat and will destroy all user data.
- Restart the PC when prompted.
As alternative method for the steps above, click Advanced Options , select the destructive recovery option and click Next to begin the reformatting process.The PC is in original factory State and all data in the system, such as the place and the date must be reconfigured.NOTE: any software "trial offer" has been included in the original factory image, it will be reinstalled, but it won't work (the test period will have expired). If so any trial software is a security antivirus software or others, before connect you to the Internet, you must uninstall (using an uninstall tool provided by the manufacturer if available antivirus software) and then install your own anti-virus software. So, you should download the uninstallers necessary and installers (or buy the software on CD) using another machine before starting this project.
NOTE 2: See the following important tips from MS - MVP PA supporter (once the restore is complete, click Start > run > winver > OK to determine what Service Pack you have):
HOW TO get WinXP SP1 or SP2 fully patched after a 'clean install': http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b
1. download & save the installer for WinXP SP3 on your desktop:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...[Yes, you can jump SP2 if you run WinXP SP1.]
2. read & take into account:
http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...3 connected as long as administrator, if necessary, double-click the saved file to install WinXP SP3. Follow the prompts. Be patient and restart twice when the installation ends.
4. make the resolution method 2 here (believe me):
http://support.Microsoft.com/kb/9431445. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered. Still, follow all the instructions.
[I do NOT recommend install IE7 through Windows Update.]
6. make sure that automatic updates is enabled; FC.
http://support.Microsoft.com/kb/306525Other references:
Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.
Go to http://support.microsoft.com/oas/default.aspx?gprid=1173 . Select "Windows".
XP"and select"Windows XP Service Pack 3 "5 steps to help protect your new computer before going online
[installation clean = new computer]
http://www.Microsoft.com/protect/computer/advanced/XPPC.mspxMeasures to help prevent spyware
http://www.Microsoft.com/protect/computer/spyware/prevent.mspxHow TO get Windows XP Gold fully patched: http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c
1. download & save the WinXP SP2 installer on your desktop:
http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8...[Yes, you can jump SP1]
1B. download & save the installer for WinXP SP3 on your desktop:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...2. read & take into account:
http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...3. administrator, if necessary, double-click the saved file to install Windows XP * SP2 *. Follow the prompts. Be patient and restart twice when the installation ends.
3B. logged on as administrator, if necessary, double-click the saved file to install WinXP SP3. Follow the prompts. Be patient and restart twice when the installation ends.
4. make the resolution method 2 here (believe me):
http://support.Microsoft.com/kb/9431445. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered. Still, follow all the instructions.
[I do NOT recommend install IE7 through Windows Update.]
6. make sure that automatic updates is enabled; FC.
http://support.Microsoft.com/kb/306525References with dubbing:
Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada. Reach
http://support.Microsoft.com/OAS/default.aspx?gprid=1173 | Select "Windows".
XP"and select"Windows XP Service Pack 3 "Protect your PC!
http://www.Microsoft.com/athome/security/computer/default.mspxLearn how to protect your PC by taking the three simple steps
http://www.Microsoft.com/downloads/details.aspx?FamilyId=3AD23728-497... -
How to get a user of another computer account turned off my computer for the family
There is a user account on my computer from another computer and it has more rights and privledges that I don't. and he can go through my files and probably a lot more than what I know. Help, please
> It has more rights and privledges that I don't
This means that his account is administrator, and yours is not.
Nothing can be done. It has all the privileges and you do not have the privilege to delete his account.
I n ' know what's between you and him, and I don't even want to know.
The only possible way is to take it to the reliable computer rooms maintenance shop and have the technology to remove his account, PROVIDED that it is YOUR computer. -
WiFi no longer works when the computer was unplugged
We just got wifi via the border about two weeks ago. Initial configuration must be done with an Ethernet cable, but our jack is not in the computer room, it's in the living room, so we had to move our entire computer in the living room to set up. Well, once it has set me up we unplugged the power cord and the computer still worked on the wireless connection. We did not want to leave in the room forever so we unplugged and he returned to the computer room. Now, he does not connect to internet at all and says that we need an Ethernet cable. I want to know why it worked before wireless, but when we moved he stopped and how to fix it. Any help please?
RCC
You must contact the wonderful support of border. They know only the correct settings.
However, it may be a driver. One way to check is to go into the Device Manager
(départ > recherche > le gestionnaire de périphériques), then check the network device to see if there is an Ethernet device and a wifi device listed) -
Product licenses Creative cloud on a shared computer
I have a computer in my company that is used in a room photo. This computer is used by 3 to 5 people to take pictures and we must change these photos using Photoshop. How can I get a license on this shared computer now that Photoshop is not available per box more? This computer room photo isn't the main computer of any user in my office, it's really a shared computer is probably a few times a week.
I tried everything I can think of to get an answer. The representative of Adobe said that they license is no longer a machine and that I would need to obtain a license for each user than expected on the use of this machine. As I mentioned, it's a computer shared so allowed up to 5 people to use in a practical purpose would have cost more than $1,700... per year! This financially meaningless. So, after a lot of testing, we have moved to a free platform, GIMP. Yes, I know that GIMP is not photoshop but for our shared machine, the software does what it takes.
-
Windows cannot access the specified device path or file. may not permissions to access you the item.
Hey guys,.
I am running Vista on my laptop Toshiba P200D. Recently I was making an error whenever I try to open the files that I downloaded from the internet. The message I get is "windows cannot access the specified device path or file. you don't have the appropriate permissions to access the item "."
I tried,
- Safe mode (not to fix)
- (No luck) system restore
- check security options - I have full access to the file.
I am running Vista 32 bit. I have avast antivirus running, but is not working and im unable to uninstall it.
Any help will be accepted with gratitude,
Thanks in advance,
Chris.
PS I'm the system administrator.
I do not fashion without failure, I advised a SafeMode with networking for network access using a wired connection to download and install Anti-Malware programs.
If this does not work:
Download/save the removal of Avast on a friend's computer tool > transfer it using a Flash Player > uninstall the corrupt Avast.
Which can be the source of the problem.
As you can not turn it off:
If under warranty, contact the manufacturer of your laptop.
If this is not the case, take it to a reputable repair shop, computer room.
Mick Murphy - Microsoft partner
-
date and time change 3 years ago without getting
my Vista computer and a processor amd has changed the time and date of 3 years ago and stops at day etc. I put manually the time to correct the problem. This happened 3 times and made by himself. I checked my time synchronization to update the time automatically, but why my computer change the time at this earlier time? If others have this problem could you help me with this problem. I use kaspersky lab 2010 IPSec as well. This problem does not occur whenever I start my computer, but it did this morning, and I ask if there is a problem of security. Thanks for any help you can get.
Probable reason: you save the battery is "turned".
Please it in your maintenance of reliable computer rooms of new battery shop.t-4-2
-
OK my forehead is painful to all keyboard strokes that I know that it must be something simple, but I am brand new to the SAA. I had a site to site VPN configuration via routers 1751 that worked very well, but we're looking to add some more remote field offices, and I felt that it would be easier to maintain several sites is on the ASA 5510. I have the VPN configured on the SAA and he said that the tunnel is up. I can telnet to the ASA and ping the remote gateway on the even side of VPN and it pings fine. If I try to ping on a local computer, I get a "Request timed out". If I makes no changes apart from go to the computer room and replace the network cable the 1751 and then through the 1751 I can now ping the remote door way to my computer. The remote router works obviously very well, my statement of route on my router for vpn push through the ASA (same ip address) IP traffic that has been used by the 1751 works obviously. It seems so just like ASA is not being pushed in the ethernet0/0 VPN traffic or at least it is not encrypted. I also noticed that the ACL for NAT seems to increase in number of access either it seems, there is really just one small thing missing to make the ASA except and encrypt incoming traffic on ethernet0/0:
My network is not configured with a DMZ is something like that, the ASA ethernet0/0 and my local network on the same subnet:
Router (Cisco 2811)
|
Layer switch 2 (ProCurve)
| |
ASA5510 LAN computers
I'm trying to except both sides of the VPN in and out on Ethernet0/0 traffic I saw there was a framework for this "permit communication between VPN peers connected to the same interface' and I've activated this option.
In short, I need to understand why the VPN tunnel shows that upward and I can ping the remote of the SAA, but peripheral gateway on my network can not ping to the remote gateway through the int Ethernet0/0 on the SAA.
From the console of the ASA, I get this:
ASA5510 # ping 192.52.128.1
Send 5, echoes ICMP 100 bytes to 192.52.128.1, wait time is 2 seconds:
!!!!!
Success rate is 100 per cent (5/5), round-trip min/avg/max = 100/108/120 msASA5510 # show crypto ipsec his
Interface: *.
Tag crypto map: * _map, local addr: 10.52.120.23local ident (addr, mask, prot, port): (10.52.120.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.52.128.0/255.255.255.0/0/0)
current_peer: x.x.x.204program #pkts: 9, #pkts encrypt: 9, #pkts digest: 9
decaps #pkts: 9, #pkts decrypt: 9, #pkts check: 9
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 9, #pkts comp failed: 0, #pkts Dang failed: 0
#send errors: 0, #recv errors: 0local crypto endpt. : 10.52.120.23, remote Start crypto. : x.x.x.204
Path mtu 1500, fresh ipsec generals 60, media, mtu 1500
current outbound SPI: C49EF75FSAS of the esp on arrival:
SPI: 0x21FDBB9D (570276765)
transform: esp-3des esp-md5-hmac
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 1, crypto-map: * _map
calendar of his: service life remaining (KB/s) key: (3824999/3529)
Size IV: 8 bytes
support for replay detection: Y
outgoing esp sas:
SPI: 0xC49EF75F (3298752351)
transform: esp-3des esp-md5-hmac
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 1, crypto-map: * _map
calendar of his: service life remaining (KB/s) key: (3824999/3527)
Size IV: 8 bytes
support for replay detection: YFrom my office on the 10.52.120.0 even the etherenet0/0 interface on the ASA network I get this:
C:\Users\***>ping 192.52.128.1
Ping 192.52.128.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.Ping statistics for 192.52.128.1:
Packets: Sent = 4, received = 0, lost = 4 (100% loss)C:\Users\***>ping 10.52.120.23
Ping 10.52.120.23 with 32 bytes of data:
Reply from 10.52.120.23: bytes = 32 time = 5ms TTL = 255
Reply from 10.52.120.23: bytes = 32 time = 3ms TTL = 255
Reply from 10.52.120.23: bytes = 32 time = 1ms TTL = 255
Reply from 10.52.120.23: bytes = 32 time = 1ms TTL = 255Ping statistics for 10.52.120.23:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 1ms, Maximum = 5ms, average = 2msCount on VPN Tunnel ACL does not increase when I try to ping the address of the remote gateway.
Here is the running of the ASA configuration:
ASA Version 7.0 (2)
names of
!
interface Ethernet0/0
nameif InsideNetwork
security-level 100
IP 10.52.120.23 255.255.255.0
!
interface Ethernet0/1
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
management only
!
activate the encrypted password of XXXXXXXXXXXXXXXX
passwd encrypted XXXXXXXXXXXXXXXXXXX
ciscoasa hostname
domain default.domain.invalid
passive FTP mode
permit same-security-traffic intra-interface
Access extensive list ip 10.52.120.0 InsideNetwork_nat0_outbound allow 255.255.25
5.0 192.52.128.0 255.255.255.0
Access extensive list ip 10.52.120.0 InsideNetwork_cryptomap_20 allow 255.255.255
.0 192.52.128.0 255.255.255.0
pager lines 24
asdm of logging of information
management of MTU 1500
MTU 1500 InsideNetwork
management of the interface of the monitor
the interface of the monitor InsideNetwork
ASDM image disk0: / asdm - 502.bin
don't allow no asdm history
ARP timeout 14400
NAT (InsideNetwork) 0-list of access InsideNetwork_nat0_outbound
Route InsideNetwork 0.0.0.0 0.0.0.0 10.52.120.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
Enable http server
http 192.168.1.0 255.255.255.0 management
http 10.52.120.0 255.255.255.0 InsideNetwork
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
card crypto InsideNetwork_map 20 corresponds to the address InsideNetwork_cryptomap_20
card crypto InsideNetwork_map 20 set peer x.x.x.204
InsideNetwork_map 20 transform-set ESP-3DES-MD5 crypto card game
InsideNetwork_map InsideNetwork crypto map interface
ISAKMP enable InsideNetwork
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
Telnet 10.52.120.0 255.255.255.0 InsideNetwork
Telnet timeout 5
SSH timeout 5
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
dhcpd lease 3600
dhcpd ping_timeout 50
enable dhcpd management
tunnel-group x.x.x.204 type ipsec-l2l
x.x.x.204 group of tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
Policy-map global_policy
class inspection_default
inspect the dns-length maximum 512
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
Cryptochecksum:7e478b60b3e406091de466675c52eaaa
: endI haven't added anything to the config except what seemed necessary to get the job of VPN tunnel. It should be fairly clean.
Thanks in advance for any help... I really hope that it is something really simple as a recruit ASA just forgot
Strange, but good news. Thanks for the update. I'm glad everything is working.
THX
MS
Maybe you are looking for
-
Hello. How much Ram can my old HP pavilion manage processor Intel pentium Dual core CPU T3400 @2.16 Ghz. currently with 2 GB of RAM, running Win 7 (32-bit)? Thank you.
-
envy/Pavilion: difference of the motherboard
What is the difference between motherboards 682042-501 and 682040-501?
-
can a book of chrome hp 14 connect with a range of hp desk jet 3634 printers and if yes, how
-
HP 15-f018dx laptop: HP 15-f018dx laptop battery
Recently purchased HP 15-fo18dx laptop and I was curious to know what are the options of battery replacement. Why is this such a challenge, find a common reference for a spare battery? I guess that thousands of them and like models have been sold ye
-
My bbm blackBerry smartphones is nt launch
Hello I tried to launch my Messenger of bb yesterday after a simple reboot and she refused to come. I keep getting messages, but I can't read them. Can anyone help? It's frustrating...