WiFi no longer works when the computer was unplugged

Similar Questions

• WiFi no longer works when the lid is closed

  Hello

  I've updated my Intel Wireless LAN Driver for 17.0.2.5 and since then, whenever I close the lid (I am connected via a docking OneLink) wifi stop normal operation (connects to the network but shows "Limited" and practically not operating). If the back, I opened the lid everything goes back to normal, either directly on the laptop while working through the docking station.

  I use a Yoga S1

  Someone at - he encountered the same problem?

  Thank you

  Slovo

  Just rolled back (using Windows 8 Roll Back) for 17.0.0.34, everything works perfectly, so I guess it's a driver problem.

• Keyboard stops working when the computer is idle

  I have an ASUS desktop and windows 7.  When the computer is idle for a few minutes, the keyboard farm operation.  The mouse works fine.  Tried a new keyboard and no solution.  Tried a different USB port and the same thing.  If I restart my computer, it works fine until it is idle for a few minutes and then stops again.  Really frustrating.  any ideas?

  Original title: keyboard closed unexpectedly

  Hi Majohnson,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. This is not the exact model. your ASUS computer?
  2. The issue has started happening recently? If so, did you do the computer-specific changes before this problem?

  The question could arise is there some problem of corruption of pilot partners or a third party service interferes with the function of the normal keyboard. In order to diagnose and resolve the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try to start the system in safe mode and check if the number is reproduced. If this isn't the case, then clean the computer starts and check if that helps.

  Step 1:

  Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  Start your computer in safe mode

  Step 2:

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  If the problem persists, try the following method.

  Method 2:

  If you have any security software installed on your computer, try to temporarily disable the security software and check if the key words work properly. Subsequent update of the security after a repair software.

  Disable the anti-virus software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  See method 3 for additional assistance on the issue.

  Method 3:

  Uninstall and reinstall the drivers USB controllers. Use Device Manager to uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the keyboard and test to make sure that the problem is solved.

  For more information, please refer to:

  Updated a hardware driver that is not working properly

  Mouse, touchpad and keyboard with Windows problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Suddenly wifi does not work after the computer restarts

  After that I restarted my netbook, it is no longer connect to any wifi public my ipod has no problem. It seems that I can connect to the router but no internet and no ip address. When I connect woman manully, it acquires the router's ip address. I can't even restore the system. When I tried to open IE, my alerts firewall running TCP/IP. Please help me.

  Hi yuanlinsh,

  · What is the number and the model of the computer?

  · What is the service pack installed?

  Follow the methods below:

  Method 1:

  Disable security software and firewall temporarily on the computer and then try to connect to the internet.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Follow the steps from the link below: Troubleshooting network connection problems:http://www.microsoft.com/windowsxp/using/networking/maintain/troubleshoot.mspx

  Method 3:

  Also, try to reset the TCP/IP Protocol and check the results: how to reset the Protocol (TCP/IP) Internet:http://support.microsoft.com/kb/299357

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bluetooth is no longer automatically when the computer starts

  I have the battery Bluetooth version 2.01.21.1. It was working fine. When the laptop booted, the bluetooth mouse was connected automatically.
  All of a sudden the icon will automatically appear in the system tray and I so manually connect the mouse every time
  It is still listed in the desktop Start menu, and it is always checked at startup in the msconfig.
  How can I fix it?
  Thanks in advance

  Hello Andrew

  Try to remove preinstalled Toshiba BT stack and after mobile download page restart install the most recent version of Toshiba.

• Update the Configuration failed on Windows Vista when the computer was closed prematurely at sea

  My son turned off the computer before the update of configuration was complete.  It uses a Compaq Vista premium desktop computer.  The operating system will not load (it is stuck in a loop trying to reconfigure the old settings before the update).  We have tried to start in Mode safe mode and do a system restore.  The first available date is November 15, when the update occurred.  System Restore got the point to finalize and then jammed (lasted at least 4 hours).   Any suggestions other than a complete system to recharge?

  Hi DRoggeman,

  Welcome to Microsoft Answers Community Forums.

  I suggest you to do the Startup Repair to fix boot of startup problem and uninstall all updates you have installed.

  Reinstall or install updates for your computer by going to http://windowsupdate.microsoft.com

  To perform the Startup Repair, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.

  2. restart your computer.

  Click the Start button, click the arrow next to the lock button, and then click restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  Note

  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  For more information, please see the links below,

  ·          http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem Fixed a problem starting to boot.

  ·          http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions Frequently asked questions.

  Hope this information helps you.

  Kind regards

  Arona - Microsoft technical support engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Flash Player stops working when the computer is restarted. Why? It is always enabled.

  Why is Flash Player stops after restarting the computer to work? I have download Flash Player several times a day. Norton is the cause? When I re - download, I get a message that I have not sufficient user privileges, but it solves the problem, anyway!

  Unlocker is my go - to for fixing the files in this State.  It is probably easier to do it manually: Unlocker - free download and software reviews - CNET Download.com

  That said, the permissions being stripped on files is a symptom, not a cause.  You might get away with the lock and blowing these files and things will work normally after that.

  The point I want to drive home, it is that it would be smart to take advantage of the opportunity to save something essential.  You could just as easily be the first signs of catastrophic disk failure.  Having lost my share of data that has not been backed up, I always count these early warnings as gifts and take seriously at this point.  There are many good solutions free/good market online (especially if you don't have a lot of data that you really care), as well as traditional approaches to removable disk.

• Windows does not work when the computer starts in mode 'sleep'

  The computer is easily adjustable in standby mode when I press on the eve of my keyboard key. However, when I want to start the computer again via push any key, the screen never shows anything (just fill black and nothing can be seen). Indicators power will return to the pilot and solid seems also lit, but just nothing display on screen. I have to push the power to shut down the computer completely to restart again.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info in the link above and in the "related links", including this one:

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  See you soon.

  Mick Murphy - Microsoft partner

• Can Fax and Scan works when the computer is in standby?

  I am relying on Windows Fax & Scan (WFS) to try repeatedly fax a document until it succeeds.  He will continue to try even if it goes into mode after the time period specified in power options?  Right now, I've set High Performance from switch to "standby" mode, but it seems like a waste to keep the fully active computer only try to fax from time to time.  It's a must to send the fax, but if the computer doesn't have to be quite awake to do this, or if she'll wake to do that, so much better.  For example, I understand the HD turns down mode "Eve".  If there is enough RAM, I wonder if the HD even turn up just to send the fax.

  Hi Frank,.

  If Windows Fax and Scan is set to auto answer mode and your ring-in modem is defined as a factor in reactivation - usually required to be put in the BIOS of the motherboard (Basic input and output system) - the system will be woken up and answered the call.

  Note: Changing the BIOS / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• How to restore my system when I bought it? Did not the disks in the operating system when the computer was purchased.

  Original title: System Restore

  How to restore my system when I bought it? No disk when I got it.

  I can not open a new document in works 9 says file is missing? System Restore has new date

  I want to go further? is there a way? Windows Vista home Premium SP2

  Hello

  System Restore puts your computer's settings to a date earlied.

  You mean that recovery of the system.

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• The picture card no longer works when the location of the image is changed

  I spent a lot of time creating clickable images on a .png to a graphic image in Dreamweaver CS6.  When I downloaded the file on the web, I realized that I had made the connection between a file that was in my downloads folder. When I changed the source for the file in Dreamweaver hotspots correspond more spots on the image! If I resize the image, the hotspots get resized too, so they no longer correspond. What can I do? The image is the exact same that was used originally, but I had resized it before adding the hotspots.

  Thank you!!!

  I found myself just to redo the map image to fit the new image. It was not as hard as I thought it would be. Based on questions from other people, I realized that there is no easy solution. Thanks a lot for your help!

• WIFI does not work on the computer.

  I have acer laptop and recently upgraded gateway for windows 7 64 bit Ultimate edition of windows 7 Home Basic. He disabled wifi and watch card that is no longer. I tried many ways, and I couldn't find same on Device Manager. Help, please.

  Hello

  You will need to go to the Acer Web site > key in your Acer model number and OS > finding drivers 64-bit Windows 7 for your specific model.

  Choose the right drill bit version of your operating system: Windows 7 64-bit.

  If they are available, download and install them.

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  See you soon.

• HP Pavilion g6-1373ea WIFI not automatically connect when the computer starts or restarts. Tried everything

  At my phone 2 days and it's a great phone but it is struglling to do a simple task. I turned off the power saving mode. I made sure the wlan services are set to start on auto and I deleted the profile and added them etc. I'm a COMPUTER technician intern so I know what I'm doing, but I can't really fix this. I wouldn't have to manually connect to my wifi whenever I start my laptop. My 4 year old toshiba could manage wifi perfectly and it ran windows 7!

  The Exchange or refund should not be a problem and I could do this suddenly course if I were you. Many problems after 2 days.

• Recently installed virus - repair - uninstalled MS2003 - MS2007 - 6500 PRINTER Multi no longer works when the desktop is disabled. It seems to be at the point of death/pause? What help can offer you?

  I uninstalled and reinstalled several times to resolve the problem only there never get fixed. Please advise any assistance that you may have.

  Alice

  Hello Alice,.

  We will perform the uninstallation/reinstallation in a different way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver.

  4 reinstall the printer.

  In addition, here are some references on printing:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• Music app does not work when the screen is closed!

  Android6.0.1

  Compact Z5.

  When I listen to the music in the music of sony and closed the screen app, music will play a minute and stop, even when I turn the offshore endurance and add it to the white list, but it doesn't work.

  Other applications that can play music also encounter this problem. Some applications of music need wifi, they cannot work when the screen is too closed.

  What can I do about it?

  I think also ultra endurance disables many apps, so my guess is that you have a 3rd party app that close somehow your applications when the phone goes to sleep.