See 4.5 Security server problems since installing SSL certificate

Similar Questions

• How to install SSL certificates on ESXi 4.1 hosts?

  I am in a DoD environment and need to install SSL certificates for each of our ESXi hosts.  I may have missed it, but the only one of the official instructions, I can find are for vCenter (Windows).  These must be installed on the current host.

  I have the two Base64 as the pkcs7 (p7b) formats, but prefer to use the pkcs7, since it covers the complete certificate chain (which is important, because DoD case are not part of the standard certificate store).

  Instructions/advice would be much appreciated!

  Hello

  Take a look at page 147:

  http://www.VMware.com/PDF/vSphere4/R41/vsp_41_esxi_server_config.PDF

  The chapter "Replace a default with a CA-Signed Certificate" is what you are looking for

  Concerning

• See connection to the server can be installed on the server vCenter Server?

  Very simple question.

  4.5 View connection server can be installed on the same virtual machine as vCenter 4.1?

  I know that is not optimal.  He would only be in environments very small business (less than 10 users) where to buy two servers for VDI OS licenses would be unaffordable.

  Thank you.

  No, they cannot be installed on the same machine.

  ____________

  blog.eeg3.net | Useful links related to VMware

  If you have found this device or any other post useful, please consider the use of buttons useful/correct for award points.

• SSO hosts SSL certificate is unknown. You can fix this since the SSL Certificate tab

  I'm trying to reregiter my vro with sso authentication but I keep running into this error. The certificate has already been imported.

  any idea? Basically, I removed the vro unit and deployed a new and now problems with registration of SSO. I need to remove the plug-in vcenter first vro?

  

  Looks like you have imported the ssohost:7444SSO certificate. You must also import the ssohost:443 host SSL certificate

• EA6500 FTP security & server problem

  I'm fairly knowledgeable about computers, but still learning my way around networking.  There are two ethernet cables to come to my house with optical fiber connections high speed.  There is a router on both of them and I have therefore 2 WI - fi networks.  I have a 2 t HD Seagate attached to the EA6500. Access to records is enabled and I have a name of user and password set up so I can see the drive of all my devices.  It is mapped as a network drive on a window 8.1 machine and a Windows 7 laptop.  I'll try to set up a ftp server on one of them, but when I'm at the EA6500 last week, I discovered that he has built in ftp server.  I turned and tried to open a session.  I tried networks as well as the 4 g network on my phone.  4g just give an error, but the connection request came when I was on one of the networks.  My credentials have been accepted, the ftp screen came, but no drive and no file.  I spent an hour for most useless on the phone with Linksys support, but have learned one thing: when I disabled access to the records, and then the disc with all the files appeared.  However, no newspaper was asked.  Enter "ftp: / / {ipv4 address}" product page ftp in my browser with all the files revealed.  In addition, access to the files on my network was of course now disabled.  I asked the tech by the lack of a connection is required, and she told me that I only knew that the address ip so no one else would be able to see my files.  I almost called her a stupid at this point.  Unfortuneatley she seemed not very security conscious or not even aware of how ridiculous that was.  I have re-enabled access to the folder and the disabled of course ftp again.  A refresh of the page in the browser returned to the blank page of ftp.  Is it possible to use effectively the built in Server ftp securely?

  Now if I'm in a remote location, I can connect account Smart Wi - Fi, will disable access to files and turn on ftp temporarily, then access my files and ftp, then backtrack.  It's a work-around that I don't like.  Someone managed using the Linksys FTP safely while maintaining access to local folders?  Also, is there a way to limit the connection to a particular username?  The customer accounts and admin (password w/router) have already been awarded to highly secure passwords, but the one I used for local access, not so much.  If I get this job, which apparently won't be enough, because it doesn't seem to be a way to make the distinction between a local and a remote user in the settings of the router.

  Hold on!   AHA!  I think that I thought about it!  The correct answer to your question should have been no. only, I created a user, but I did not know that the 'actions' were added to the user by clicking on the blue word 'actions' next to my username.  So NOW, when I try it in Google Chrome, voila! I can see the files.  I turned it back off again, so I can create a combo/part of the user with a good password.  One problem remains.  I tried adding the actions first by clicking on the admin user.  Now, I don't see a way to edit the admin user to disassociate the part.  I really didn't have admin access.  I was only adding the part as a test, but now it seems that it is there to say.  Please don't tell me I have to reset the router to get rid of it.

  What a pity that phone support is not able to explain on the management of stocks.  Just ask me about stocks helped helped focus my attention on the right box.  Thanks, chadster766!  I ' l count this issue resolved and leave the issue with admin for another ad if I can't understand me.

• MAIL CRASH since installing iOS9.3 on iPhone 6 Plus mail crashes on opening. Problem since installing 9.3.1.

  Since I have installed iOS 9.3 on my iPhone 6, mail crashes at the opening. When I double click on the mail to the "home" button seems to be running in the background but still does not open when selected - crashes immediately. I've just updated to 9.3.1, but it has not solved the problem. Any ideas?

  Hello RonBearparkville,

  Welcome to Apple Support communities.

  As I understand it, the Mail app is stop unexpectedly on your iPhone 6s since the update of iOS. Try to take a glance at the article below and running through the application general troubleshooting tips below.

  If an application you have installed unexpectedly closes, unresponsive, or will not open - Apple Support

  If the problem persists, try to restore your iPhone as described here:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Ciao.

• analysis of the problems since installing windows 10 / Office 2016

  I have just instaled Windows 10 and office 2016 on a new machine of HP. I have a HP2540 printer. The scan option no longer appears and I had to go through a complicated process to locate it. There must be an easier way?

  Secondly, when I scan a document I want to keep it as a pdf, but this does not seem to be available. Help please!

  Hello
  
  Thank you for using the HP forum.
  
  You can download and install the software COMPLETE features of HP printing for your operating system?

  Hope this is the correct printer:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-2540-all-in-one-printer-series/5295960/model/5295961#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.

• Weird Audio problem since installing new SSD and reinstall the OS and the upgrade of Ram

  I have a really strange problem in first (well the same thing happens with native files outside the first he too!)

  Some of my corrupted .wav and .wma audio files. At first I thought it was a buggy project file.

  Then I checked some other files of the projects waiting to be done and they were the same time of a heart attack.

  So I copied the apparent bad file to my laptop and it plays very well!

  Then when I check some audio files of the projects finished on my PC they sound corrupt too! And of course, they were very nice when I actually finished projects.

  I have tried in the first CC2014 and CS5, but it is not the program that I know now.

  I googled "Audio codecs Windows7" but all the options appear to be malware, someone has any ideas? Y at - it a codec pack that I could try?

  I am running Win 7 Pro

  I7 960 @ 3.2

  24 GB ram

  NVIDIA GTX 480

  Thank you

  Ronan

  Had this sort.

• Since installing windows 10 display problems

  I am new to these forums and I hope someone can help me with a problem since installing windows 10 last night, I. When I opened the premier, everything seems to go well except I get no video previews in the source or timeline panels. When I play the clip I can hear the audio but just get a white screen where the video should be.

  I tried to open an old project, create a new project and import a mp4 clip over and the same result.

  I tried to switch back compatibility on windows 8 and empty my cache of media folder.

  I use the latest version of the first pro, but when I went to update this morning I also get an error message.

  Everyone knows about it or have any solution?

  Thanks in advance

  Hi Meagan,

  I would say that switching video converter.

  Go to file > project settings > General and change the "Video Renderer" to "only Mercury playback engine software. Click 'OK' and select "Remove the Previews". Save the project and then restart Premiere Pro.

  Hope that helps.

  Regalo

• Windows Defender works not security updates will not install required valid security certificate?

  First of all, I was unable to unstall updated, then it was not valid certificates of security no. I can't turn defender of windows on my computer of freezer

  I tried everything and I can't fix it it seems to deteriorate.

  Hi VelmaMarcum,

  ·         Do you have any other security software installed on your computer except Windows Defender?

  ·         What happens when you try to install Windows Update?

  ·         What is the error message right received invalid security certificates?

  ·         When exactly do you get this error?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the article in the Microsoft Knowledge base and check if it helps.

  Troubleshooting of Windows Defender

  http://support.Microsoft.com/kb/555957

  Method 2: The problem with Windows Update, you can see the article.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  I hope this helps.

• SSL certificate for the Security Server external facing

  Dear all,

  Today, I bought an external SSL certificate of DigitCert for our security server. I imported the certificates in the personal certificate (computer account) on the Security Server store. DigiCert provided three certificates, root CA, CA server and the other with the name of our domain. I renamed the vdm to the friendly name of the existing self-signed certificate and used the friendly name for the certificate vdm has our domain name. Subsequently, I rebooted consulting on the Security server. They are all released on except the "Display Blast Secure Gateway" service which entered the suspended state.

  On our facility, we have a connection to the server and a security server. To the Security Server, we use a different domain name for connecting to the server. We have an internal PKI and the connection to the server uses an SSL certificate.

  connection to the server = server01.internaldomain.com

  Security Server = server02.externaldomain.com

  Why the certificate cannot be loaded to view Blast Secure Gateway? I missed something?

  Thank you

  Edy

  I solved it. It was with the private key of the certificate. This is the reason that the Blast Secure Gateway could not load.

• Problem with security update KB2667402, cannot install

  Original title: KB2667402

  An old Asus 1005pe netbook, yes the "Seashell" is still ongoing, problem with the above security update. Windows Update shows this update "has failed" to install. I checked the list of updates installed and found it even already installed. I think that the date, from 2012. I'm of the mindset that you 'don't fix if it is not broke' and 'if it is fixed, don't break again. " My questions are:

  If the update is already there, why is Windows up-to-date call for this again? It is already not working?

  My backstory is, this netbook was sitting on the shelf for five years before taking it out for use. Of course, I knew that update was necessary, so I put WU on the move with more than 238 updates on a single call. I don't know there was more, WU was executed several times.

  I ran the journal of reliability to see how the computer has been assigned, he showed a level of performance after the updates. The list of success or failure of update installs show more failures of this one update.

  My Adventure continued with Asus and their Asus "Live update" is now uninstalled and the function of the bios update goes to the site but does absolutely nothing. It's a question of Asus but part of my adventure too.

  I read another thread on this issue and a gentleman uninstalled the existing KB2667402 and leaves the new update to replace.

  If WU has this update on the new list, is the original in fact "broken" and need to be replaced?

  I do not want to solve this problem, if it is not broken. I hope that's not too talkative, I'm looking to understand and learn as well. I'm not even sure categories below are correct, please bear with me.

  Thanks for your time.

  Hello

  I realize has the inconvenience that you are experiencing with Windows updates. I will certainly help you to question.

  I suggest you follow the steps mentioned below:

  Method 1:

  Run the Windows Update Troubleshooter that refer to the link below:

  http://Windows.Microsoft.com/en-pH/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2:

  Reset the Windows Update components that refer to the link below:

  https://support.Microsoft.com/en-us/KB/971058

  Method 3:

  If you use a third-party security software, try to disable the third-party security software and check. Disable third-party security software.

  a: you should see an icon for your Antivirus program in the taskbar notification area. It is usually at the bottom right of your desktop.

  b. click the third-party security software, you will see a pop up.

  (c) in this pop and select the option to disable, click on it.

  d. now third-party security software will be disabled.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished.  If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  For more information, you can also check out the link below:

  Problems with installing updates

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Problem with USB auto connect with clients that connect through the Security server...

  Lack of VMware View 5.0.1 with 2 servers connection and a security server. When the clients connect directly to the server connection, USB connection works very well... users can use their USB drives and other devices with their VM. The problem occurs when they attempt to use their USB devices when negotiated through the Security server.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing so it does not always work... customers just to get the scrolling message of office in the USB menu initialization.

  Our current facility is:

  External IP address-> DMZ (Security Server)-> connect to server

  Entrust us our firewall config through our ISP (we are not overloaded with scientists here, it's just me, so things like little help my work load). They are certainly not incompetent (or at least were not in the past). I had to open the external 32111 IP port to the DMZ, then of the DMZ to our connection server that is used for external connections. Everything about VMware View works perfectly for the clients that connect this way, but not USB devices.

  One thing I give is if our having a configuration of VLAN dedicated for customers views influence what either. I'm trying to keep an eye on what ports are open that for our firewall for my records, but I do not see where I openly opened ports on the internal side of security server to our internal network. He must have the port opened directly from the internal face of security server of vmware 32111 discovers clients?

  The firewall Guys tell me that they checked over and over that port 32111 is open throughout the. They also said that they tried to telnet 32111 to our security server port and have nothing back (should have gotten garbage at least according to them).

  An idea of the next steps to take? It is obviously a blocked port, I just have no idea why at this stage.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing it still does not work

  This is not what it takes. The agent is listening on the port 32111, you must open the firewall to allow connections to the Security server for the desktop on port 32111 (same thing you must allow RDP and PCoIP).

  Mike

• problems to install the latest plugin from vcenter server 5.0.0.149 on the vco 4.1.1 build 733.

  I have problems to install the latest plugin from vcenter server 5.0.0.149 on the generation of vco 4.1.1 733.

  If I go to the plugins tab I see vCenter Server 5.0.0.149 Installation OK

  I configured a host esx to vCenter Server tab, but as soon as I click on 'Apply' it starts to load forever.

  I tried to restart the server vco and vco configuration services, but the problem remains unchanged. In the server.log I couldn't find anything relevant, but it is still attatched

  Hello!

  Try increasing the memory for the configurator web-tool, as described in the release notes:

  http://www.VMware.com/support/Orchestrator/doc/vCenter-server-plugin-50-release-notes.html

  See you soon,.

  Joerg

• Problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo)

  Hello

  I have problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo). The problem appears in the last step of the instalation during construction of the vmmon module I installed VMware server 2 on Debian Lenny (linux-image - 2.6.26) according to http://www.howtoforge.com/how-to-install-vmware-server-2-on-debian-lenny and Vmware has worked well. Now, the instalation ends with the following output:

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config1/vmmon-only '.

  do /lib/modules/2.6.30-bpo.1-686/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  CC /tmp/vmware-config1/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-config1/vmmon-only/linux/driver.c:31:

  /tmp/vmware-config1/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  /usr/src/linux-headers-2.6.30-BPO.1-common/include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [4]: * /tmp/vmware-config1/vmmon-only/linux/driver.o error 1

  make [3]: * error 2

  make [2]: * error 2

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-config1/vmmon-only '.

  Unable to build the vmmon module.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/go/UNSUP-Linux-products "and "

  " http://www.VMware.com/go/UNSUP-Linux-tools ". "

  The execution is canceled.

  I appreciate all ideas of solution to this problem.

  Thank you Pavel

  Your kernel is NOT linux-image - 2.6.26 but (of output) 2.6.30 - bpo.1 - 686

  See this page for a fix possible (the problem is common also for workstation):

  http://www.insecure.WS/2008/10/20/VMware-specific-specific-55x-and-kernel-2627

  Or see this thread:

  http://communities.VMware.com/thread/188410?TSTART=0

  André