See documents inserted\modified to a given period of time
Hi guys,.
Is it possible to display all the records (maybe the list table) inserted or modified in a given period?
This should give me some clues in some records to the database level in a large application debugging.
Thank you very much
Napster
As far as my knowledge goes, there is nothing that your DBA has done for backup and can be restored, I guess you will not be able to recover it back. Only option left would be to debug the code to check which could be modified/inserted.
Thank you
Ishan
Tags: Database
Similar Questions
-
Sequential Workflow Condition in UCM for a given period of time
Hi all
I need to create a workflow where 7 users would get a single document in a workflow and they can order the document but they can check-in the document at any time between the period of one month. I created the workflow, but when the first user withdraws the document then the second user do not get an option at the checkout of the document.
The requirement is adaptable to the Complutense University of MADRID.
Please suggest!
Thank you and best regards,
RichaCheckout is designed in the way that only a user can have a document to start at the moment - if two users change simultaneously in the same place in the document, the changes will be considered as good?
If you can somehow 'divide' the content item (for example a content item is a book and you can divide it into separate chapters, written by different authors), you can use folios. Otherwise, the user that extracts the document should go back (checkin a new version or cancellation of the withdrawal).
-
How to make a loop performance during a given period of time?
Hello!
I'm new to labview and have found how to do a loop running for 2 seconds for example, and then to get out.
Hi Hookso,
You can do this by using different loops like while loop and loop for Roderic has already indicated how using a loop for I illustrated in the attached vi how using a while loop and function of elapsed time. Take a peek inside.
Kind regards
Amine31
(Give congratulations to good answers and Mark as a Solution If your problem is resolved)
-
Request for the old data that does not correspond to new data within a given period
Hi all
The reports that I need to create one for all employees who were going from one Department to another within a given period. The way I ran this report in Reportsmith (taken from our old system) was to compare the dept field from the start date to the dept in the end date field and it gives me these associate who had moved. I had to do it this way b/c dept changes can occur using several different types of actions (change to Surv, promotion, etc.), none of them exclusive to only change dept. We now use Oracle HRMS and I need to create this report even with this system using SQL.
Does anyone know how to compare the data between two different dates and shoot those who do not match? Your help will be GREATLY appreciated!
Best regards,
Yasmin E. Alberto
HRIS analyst
[email protected]Hello
Here is an example of an INSERT statement that may be relevant to this issue:
INSERT INTO emp_action (empno, action_date, deptno) VALUES (7902, TO_DATE ('2009-06-18, 'YYYY-MM-DD'), 10);
If someone wants to help you, in doing anything more than guess, then that person probably will need create tables that are similar to yours (but much smaller).
To do this, they can issue instructions CREATE TABLE to the tables, the INSERT commands to fill (put data in) the tables.
The tables invloved in this problem are probably simple, so if I can see some INSERT statements, I can probably write instructions CREATE TABLE myself and save you the trouble.For more info on INSERT, see the [Manual of the SQL language | http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_9014.htm#sthref8944]
If you compare the deptno to a row of a table to the previous line, you can use the analytic LAG, something like this:
WITH got_prev_deptno AS ( SELECT empno , action_date , deptno , LAG (deptno) OVER ( PARTITION BY empno ORDER BY action_date ) AS prev_deptno FROM action_table ) SELECT * FROM got_prev_deptno WHERE deptno != prev_deptno AND action_date >= TO_DATE ('2009-01-0'1, 'YYYY-MM-DD') AND action_date < TO_DATE ('2009-03-01', 'YYYY-MM-DD') ;
Like all functions, the OFFSET is described in the [Manual of the SQL language | http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/index.htm#I].
Published by: Frank Kulash, June 18, 2009 11:53
Originally missed a few quotes. -
How to get the last day of a month for every 2 months for a given period?
Hello
Can is it some please let me know how to get the last day, last day of the week, the weekend last day, last Monday, one month for every 2 months for a given period?
Thanks in advance.
Try the below
SELECT LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))) lastday.
BOX WHEN TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), 'DY') = 'SAT '.
SO LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))-1
WHERE TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), 'DY') = 'Sun '.
THEN LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))-2
Of OTHER LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))
END as lastweekday,
BOX WHEN TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), 'DY') IN ('Sam', 'SUN')
THEN LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))
Of OTHER LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))
-(TO_NUMBER (TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))),' from)) - 1).
END as lastweekendday,
BOX WHEN TO_CHAR (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), 'DY') = 'MY
THEN LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2)))
Of OTHER NEXT_DAY (LAST_DAY (ADD_MONTHS (TRUNC(startdate,'MM'), ((LEVEL*2)-2))), "LUN")-7
END AS lastmonday
FROM (SELECT SYSDATE startdate,
SYSDATE + 300 enddate
THE DOUBLE)
CONNECT BY LEVEL<=>=>
-
How can I see "a link to a file" given in adobe acrobat pro on the mouseover?
How can I see "a link to a file" given in adobe acrobat pro on the mouseover?
It's because it's actually a link that points to a local file (using the file:/// syntax). If you change the action associated with this link, you will see that it is a command "open a web link", not a command "open a file". The latter does not display this information, that I know.
-
a defined period of time in my schedule to share with specific people.
I would like to share a period of time, given my calendar with people well nominated. Is this possible?
Hi Peter,.
Please visit Apple support communities.
You cannot share a period of time in your calendar with other iCloud users, but you can create one all day (or even a day several) event and invite people to him. You can find instructions for this purpose in iCloud: invite people to an event.
You can also create a new calendar for your specific needs (for example, a planning calendar part) and share this calendar with other people. See iCloud: create a calendar and iCloud: share one calendar with other.
All the best.
-
Hello
A problem that has been doing worse and worse for me was that my PC turns off completely after a short period of time, now about 1 hour. I used to have the same problem, however, it turns off after 4-5 hours, and after that it is completely stopped for a few hours, he'll be back to normal. I read that dust accumulation can be a problem, although I see no dust in the vents. Do you advise me to open the computer and dust off the fan itself inside the computer with compressed air? Or are there other possibilities of dust collection problems will not fix?
Before I provide documentation for troubleshooting @Pokeyster, I would like to take a moment to welcome you to the HP support community!
I'll do my best to help you to solve the problems of closing you met on your HP ENVY 15 - j023cl Notebook PC.
You asked if the dust can be a factor. The answer is absolutely! I saw him in the past when the reason for the complication was dust in Notepad. I recommend that you keep the free portable dust on a frequent basis.
Please use the links in the questions below to troubleshoot and then re-post with answers to troubleshooting questions/results.
Have you tried running in Safe Mode?
Did you do a BIOS reset?
Have you tried to do a disk defragment?
Have you tried to do a Disk Cleanup?
Please try to clean the events your Noteobok MNI
Is the noisy fan or turn constantly?
Is the hotter than normal PC?
Have you tried tests to hardware failures?
Here are a few documents for you that can help:
- Computer hangs or freezes
- Set the slow system performance.
- Reduce the heat inside the PC to avoid overheating
If this post helps you solve the problem, please pay to the front by clicking on the button accept as Solution , right of the thumbs up icon. You can click on the Thumbs up icon to show your appreciation for my efforts today!
If you need assistance, I would be more than happy to continue to help. When you re - post, please provide me with the detailed results of the above troubleshooting.
Thanks for joining in!
Have a wonderful day!
-
Check, through periods of time between the rows
Hello
I have the problem by creating a select to check between crossing periods of time.
It comes to my table
CREATE TABLE 'T_PLAN '.
(NUMBER OF 'TRAIN_NO',
VARCHAR2 (5) "TIME_FROM."
VARCHAR2 (5) "TIME_UNTIL."
NUMBER OF 'RAIL_NO '.
) ;
TRAIN_NO TIME_FROM TIME_UNTIL RAIL_NO
172 07:06 15:50 1
120 07:33 15:41 2
229 07:56 14:52 3
217 15:05 18:47 1
189 16:10 19:53 2
185 16:10 19:53 3
181 20:10 23:53 2
29: 14 142 23:32 3
I want to check if my train number 172 crosses another line with the same RAIL_NO.
In this case train number 217 hits the same time period as the fact of 172. Car: 15:05 < = 15:50
The output that I need:
TRAIN_NO TIME_FROM TIME_UNTIL RAIL_NO CHECK_ROW
172 07:06 15:50 1 INVALID
120 07:33 15:41 2 VALID
229 07:56 14:52 3 VALID
217 15:05 18:47 1 INVALID
189 16:10 19:53 2 VALID
185 16:10 19:53 3 VALID
181 20:10 23:53 2 VALID
142 20:14 23:32 3 VALID
Thank you for your support.
Tobias has soon
Hello
Here's one way:
SELECT DISTINCT
d.
NVL2 (o.rail_no
, '-INVALID' or "UNVALID", if you really want that
"VALID".
) AS check_row
OF t_plan d
LEFT OUTER JOIN t_plan o ON o.rail_no = d.rail_no
AND o.time_from<=>=>
AND o.time_until > = d.time_from
ORDER BY d.time_from;
If you would care to see instructions INSERT for your sample data, then I could test this.
Two ranges overlap if (and only if) everyone will start before the other ends one. It will be clearer if we consider two ranges do not overlap if (and only if) one of them begins after the end of the other.
This solution assumes that time_from<= time_until="" on="" every="" row. ="" is="" that="" true? ="" for="" example,="" if="" a="" rail="" is="" in="" use="" at="" midnight,="" could="" you="" have="" (for="" example)="" time_from='23:55' and="" time_intil='00:05' on="" the="" same="">=>
-
Check if file is prior to a period of time
I want to check if a file prior to a period of time such as 1 or 2 days and then perform an action on this result?
Hey,.
Quick and dirty see attached file.
Kind regards
CMW
-
Silent mode - for a period of time only. After update to Android 6.0
Hello
Cannot know how to silently for a more predefined period of time. Marshmallows before we had the choice to put this silent mode should just modified for the next 30 minutes, two hours etc. It is a very nice feature for me, because too often I forgot to turn on sounds after a meeting.
Before this feature came in the Android, I used an app that defined silent mode with a timer. Do I have to re - install an application like that?
I found where you can set (by chance) all trying to solve my problem.
If you access do not disturb in the menu drop-down (if it is not there then it is one of the icons you add to the grid) when you select the option it offers the possibility of no end or for a period of time time.
I am happy I found it too since I also use it when I go to meetings.
-
For several days my laptop screen turn off after a period of time, of no use. I have to put it in mode 'sleep' me or there is 'on '. What happened to cause this?
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
Try to reset the default power Plan settings. information is at the link above.
And how to solve problems in Standby Mode is at the link above.
And read the information of 'Related links', too.
See you soon.
Mick Murphy - Microsoft partner
-
Windows Update will restart when the changes are applied. I understand why. However, when I do not use windows, which is relatively rare, and the specific task, I often run long processes. Windows will reboot the machine by force regardless of what I'm doing at the time. I guess if you are electronic control or Watch youtube, its not that big of a deal, but when it stops at Midway for a night process, its quite frustrating.
I had turned off the windows update service, so I guess that takes care of things, or is there another process that verifies that the windows update is running and restarts it? Thoughts? Even if restarting is intentional, the fact that a modern operating system will turn off when it receives a message from the mother ship is quite disturbing (beat tone comes from the fact that I'm a nerd of linux. Sorry).
Hello
Check in scheduled tasks and also like antivirus programs that can update themselves
and sometimes require a restart.Learn how to create a scheduled task leads to the understanding of those that have been created.
How create a task in Vista Task Scheduler (apply as well to Win 7)
http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html=============================
If something stops Windows:
MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
U2415 - artifacts monitor after power off for a period of time
I'm running Win 8 Pro 64 bit, Asus GTX 760. Connected to the U2415 using the miniDP to DP cable.
It is: after turning off my monitor for a period of time (PC fixed IT), 2 hours or more, after turning it back on, I see lines on the screen.
I will need to restart the PC for it to be back to normal.
It will not happen if I turned OFF the monitor for a short period. Only when I turned OFF for a few hours.
Any ideas? Thank you.
I downloaded a video on Dropbox. I had it turned on after turning off for about 3 hours.
[See:www.dropbox.com/.../U2415.mp4]
Hi Chris, just an update.
A local forumer had discovered how to solve.
It was the scene of DP1.2. By default, it is set to "Disable". After that I put to 'Activate' and test it for 2 days, everything seems fine now.
Hopefully someone will find this useful.
Thanks Chris.
-
Recycle Bin empty automatically after a short period of time
original title: Recycle Bin emptying
I'm running Windows 7 on my laptop Inspiron 15 and myrecycle bin dumps of my files. She has a short period of time (I did not understand exactly how long). There I want to change the settings so that the files remain here until I have decide to delete. I can't find the setting that would allow me to do. I tried right-clicking bin recycle and see no settings icon?
Hello
Change the Recycle Bin settings
http://Windows.Microsoft.com/en-us/Windows7/change-the-Recycle-Bin-settingsYou have Norton, McAfee or other 3rd party utilities that affect to the trash.
I hope this helps.
Maybe you are looking for
-
Original title: why isn't my Vista system down correctly? Last month, I noticed that whenever I try to make my computer in Hibernate, or sleep, it will restart instead of doing what I select. Several times, it will reboot, sometimes in Mode without
-
How to upload a photo on the newspaper clipping in the window film
-
Original title: When I connect it to my pc it is read as a model of "Venus Vimcro" of webcam and it doesen't work, how can I solve it?
-
RE: Surface Is it possible to sort by alphabetical order of the symbols in finance app? If so, how it is done.
-
Hello!So my form muse does not work on my 3rd costume party site. Here's a test page with the form on this subject:http://slowflowdance.com/Untitled-2.htmlAnd just for troubleshooting purposes, I borrowed a form that certainly has worked on one of th