see what processes have been made on a project

Similar Questions

• What improvements have been made by the firmware update 1.0.2.0 video sx280 and aprox how much run time

  What improvements have been made by the update of firmware for sx280 & aprox 1.0.2.0 what run-time, you can get with the video shooting.

  Not another thread!

  Canon supports firmware solves the problem many others here have proven the opposite, it's the same thing on many other forums, not just this one.

  To find your answer, you look way, way back in the pages here:

  http://forums.USA.Canon.com/T5/PowerShot/SX280-battery-life-shooting-video/TD-p/22489/jump-to/first-...

  The result not only of the camera closing but many a time in his life of shots where lost because of the problem, I guess than that 'threw fat on the fire' so to speak.

  Dave

• After all the steps have been made and I clicked 'launch' I get the following message "Setup has detected that a machine restate may be waiting."  Exit Setup, restart your computer and try to reinstall.  What is a 'install '? and how do I

  After all the steps have been made and I clicked 'launch' I get the following message "Setup has detected that a machine restate may be waiting."  Exit Setup, restart your computer and try to reinstall.  What is a 'install '? and how to leave it. ?  I try to install 14 items. Anita

  If present, click the ignore button and check.

  No button ignore? If possible, please post a screenshot of the error.

• XP hang on to the restoration of the system during installation error: no changes have been made to your computer to choose another restore point restart the system restore

  Original title: XP hang up to the restoration of the system during the installation

  During the configuration of the system in the process of getting XP to hung up on the screen of the system restore

  The message says:
  No changes have been made to your computer
  To choose another restore point, restart System Restore
  To restart System Restore, click Home
  The jury of the mouse and the button doesn't work so I can't click Home tab
  Help

  Hello

  Why you try to run the system restore?

  Step 1: Check if you are able to complete the restore of the system in safe mode.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  For more information, please see the following article.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

• How do I know when my computer sercurity as compromised and what attempt has been made to the hac, a system?

  How do I know when my computer sercurity as compromised and what attempt has been made to the hac, a system?

  Hello.

  You know when you have been infected by malware:

  1. your security programs will not open either, will not scan or will not update.

  2. When you are in your Web browser, you are redirected either or you receive a lot of pop ups.

  3. your computer may slow down or freeze.

  4. you can not access the Internet.

  5 and follow the advice of Richard G. Harper:

  http://www.bing.com/
  http://www.Google.com/

  Or see your lesson, manual materials or other resources in the classroom.

  Examples of Google:

  http://answers.Yahoo.com/question/index?QID=20080405053727AAdKagd

  http://www.computerhope.com/issues/ch001296.htm

  http://www.ehow.com/how_4851647_computer-hacked.html

  http://www.WikiHow.com/know-if-your-computer-has-been-tracked

  See you soon.

• Accident app: "all discussions of WebKit for this process have been closed.

  Hi bbdevs,

  develop a webworks app that uses the

  watchPosition()
  

  function.

  During the function watchPosition is active my app breaks down.

  This happens on a Z10 where my app is installed in debug mode.

  I use SDK Webworks 1.0.4.11 and bbUI.js 0.9.6.131.

  The 'watchPosition()' function calls a function where I do a little database to insert on the devices websql.

  This also works well - what app is backgrounded.

  Before the application blocks the last thing that has happened is a successful insertion of data to the database. That's what says my console.log.

  For better debugging, I installed the Momentics IDE (from the tools of waterfalls) and attached to the device via ssh.

  With the command 'slog2info w', I see more balls then in my browser chrome (thanks to ΕΚΚΕ for this great tip!).

  Happening in the slog before the app crahes:

  Apr 05 14:06:15.042      webkit_launcher.233201698               webkit      0  All WebKit threads for this process have been shut down.
  Apr 05 14:06:15.063      webkit_launcher.233201698               webkit      0  WebKit graphics for this process has been shut down.
  Apr 05 14:06:15.134      webkit_launcher.233201763               webkit      0  Received unexpected connection death 1073741825 from parent process! Exiting...
  

  A few minutes ago, I found this in the journal too:

  Apr 05 14:04:58.440      webkit_launcher.233201698               webkit      0  Thread 5: responding to low memory
  Apr 05 14:04:58.440      webkit_launcher.233201698               webkit      0  Thread 7: responding to low memory
  Apr 05 14:04:58.440      webkit_launcher.233201698               webkit      0  Thread 1: responding to low memory
  Apr 05 14:04:58.441      webkit_launcher.233201763               webkit      0  Thread 4: responding to low memory
  Apr 05 14:04:58.441      webkit_launcher.233201763               webkit      0  Thread 1: responding to low memory
  Apr 05 14:04:58.441      webkit_launcher.233201763               webkit      0  Thread 6: responding to low memory
  Apr 05 14:04:58.441      webkit_launcher.233201763               webkit      0  Thread 14: responding to low memory
  Apr 05 14:04:58.446      webkit_launcher.233201698               webkit      0  Thread 4: responding to low memory
  Apr 05 14:04:58.619      webkit_launcher.233201763               webkit      0  Thread 3: responding to low memory
  

  For more information:

  It's my SQL Transaction, which is called by the watchPosition function:

  database = window.openDatabase('mydbname', '', 'my Database', 1 * 1024 * 1024);
              try {
                  database.transaction(
                      function (tx) {tx.executeSql('INSERT INTO tbl_gps (lon, lat, alt, acc, altacc, head, speed) VALUES (?, ?, ?, ?, ?, ?, ?)',
                          [posData.coords.longitude, posData.coords.latitude, posData.coords.altitude, posData.coords.accuracy, posData.coords.altitudeAccuracy, posData.coords.heading, posData.coords.speed],
                          function (tx, res) {
                              onInsertSuccess = true;
                              console.log('Data insert into Table GPS Data Successfully');
                          },
                          function (tx, err) {
                              onInsertSuccess = true;
                              showToast("ERROR - DB INSERT Trail GPS Data - code: "+err.code+", message: "+err.message, "OK", 60000);
                          });
                      }
                  );
               } catch (err) {
                   console.log('There was an Error during database transaction! '+err.message);
               }
  

  Someone at - it an idea for this problem resolved? I'll be happy on any comment to bring me a little bit forward to make this work.

  Thank you in advance to all those who have read this thread... and thanks much for any tip!

  Lars.

  Hi adam,.

  Thank you for your message. I tested a lot last weekend and after hours and hours, I figured out more details on this memory problem.

  First of all:
  It was not a problem of database :-)
  The database transaction is accidentally the last only asynchronous thing happens. But the reason for the crash of the app is another.

  I also draw a line on the map with each update location.  I use openlayers for this feature. When the application is in the background, it seems that there is a problem with openlayers.

  I found a solution for this problem:

  I store my data to the line in a table when the application is backgrounded - when he returns to the foreground I take the data in the table and draw the line again.

  When I get the error again - hope not, of course - I'll open a subject in jira.

  Thanks also to luca for a brainstorming!

• My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  What can I do?

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• "An error in updating your system has occurred." Select 'OK' to undo the chnages that have been made.

  I install "WindowsXP-KB926139-v2 - x 86 - ENU"(power shell)
  at the end I have "an error in updating your system has occurred." Select 'OK' to undo the chnages that have been made. Windows XP 32-bit. Please help solve this problem. Thanks in advance.

  imran_iiui,
  When you look at your installed updates it appears as failed?  If Yes, what is the error code that you found?  Have you looked at the actual article for KB926139 and links for information PowerShell?  You can look through those.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Trying to system restore but impossible - error: no changes have been made to choose a different restore point and try again

  Windows vista system restore error: no changes have been made to choose a different restore point and try again. I did and got the same answer. dirtied with services before that, so why I did a restore. go to services and everything works again no luck.

  Hello

  1 Norton will interfere with system restore

  If using Norton, disable Norton Protection inviolable, use SR.

  2. try Safe Mode system restore:

  And here's how to go in Safe Mode options; select Safe Mode from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  3 malicious software stops the restoration of the work system to protect themselves from coming off.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• What libraries have been presented in the theme of the beauty of the books?

  Original title: beauty of the theme books

  Does anyone know what libraries have been presented on the pictures of the theme?

  Hi Dan,.

  This collection of images contains illustrated from all libraries in the world. When you select a picture library/theme, you get the same information.

  For more information, see the link:

  The theme of the beauty of the books

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• I can't reset or refresh my Windows 8. When I try the message appears: THERE WAS A PROBLEM RESET YOUR PC, NO CHANGES have BEEN MADE.

  I bought my PC about year ago. I have windows 8 installed from the beginning. Right after the purchase, I was told by the shop assistant to reset my Windows, so I did as Fallows: parameters - parameters Change PC - general - all remove and reinstall Windows---> who he was. It went ok, no problem, no need to insert additional disks (which I did not at the time of the purchase, by the way - saleswoman told me that recovery of windows, the files are already on the hard drive).  so now after 1 year I am planing to reset or at least update my PC again... but I IMPOSSIBLE. Whenever I try to do the same procedure as described above, I got this message: THERE WAS A PROBLEM RESET YOUR PC, NO CHANGES have BEEN MADE. and that's it!. I have absolutely no idea why. I restore the previous settings of Windows work, with the hope that it will help, but it didn't. Still can not reset my Windows. Anyone have this problem too, or if she had.

  I have attached the picture with this message for a better understanding

  Yes, I bought my PC (Dell) with 8 Windows preinstalled, I was just curious to know if there is a way to extract the product key for the version pre-installed (just in case). Thanks for the support, I will try your method "to create installation for Windows 8 media. But the real question is why I get this message when I try to reset the system "There WAS a PROBLEM of RESET YOUR PC, SUBI NO change".

  See here to prepare a Windows 8.1 with update 1 USB Bootable for installing with a UEFI BIOS from Dell:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

  Make sure that you select the correct edition.

  If your system does not on Windows 8.0 updated the BIOS with the latest version before using the installation media:

  http://dellwindowsreinstallationguide.com/updating-the-BIOS/

  The latest version of the BIOS can have improvements that will help the 8.1 Windows to run more easily.

  As you know Windows 8.0 Windows 8.1, I recommend a new installation of Windows 8.1 opposed to reset:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-8-1/Windows-8-1-installation/

  You can follow the optional procedures to wipe the drive before installing Windows 8.1:

  http://dellwindowsreinstallationguide.com/cleaning-up-a-drive-format-vs-secure-wipe-SSD-and-HDD/

  Once you have installed Windows 8.1, install all drivers needed Dell system in good order:

  http://dellwindowsreinstallationguide.com/downloading-drivers-checking-hardware-IDs-and-downloading-and-installing-Dell-system-drivers-in-the-correct-order/driver-installation/

  After that, you can install the latest version of Dell backup and restore:

  http://downloads.Dell.com/FOLDER02909509M/1/Backup-and-Recovery_Application_64M9D_WN32_1.8.1.71_A00.exe

  This will make a new internal recovery Partition which is Windows 8.1 with update 1 and not Windows 8.0. You can then do a backup and Dell recovery media if you wish:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery-1-8-1-71/#RecoveryMedia

• When I opened every day Premiere Pro it always says that I should check my account and I will not be able to use the work in a few days...  But I checked ve and my account is fine, all payments have been made. I m afraid that I have not access more in fe

  When I opened every day Premiere Pro it always says that I should check my account and I will not be able to use the work in a few days...  But I checked ve and my account is fine, all payments have been made. I m afraid I won't access more in a few days... What should I do to stay with my access?

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• How can I see what I have stored in iCloud?

  How can I see what I have saved in my different devices iCloud?

  Here's how you can visualize what you have stored.

  Manage your iCloud - Apple Support storage space

  Hope this helps, good luck to you.

• How can I see what I have on icloud?

  How can I see what I have on icloud?

  You can switch to the iCloud default app that needs to be on all devices iOS, or you can go to iCloud in the settings.

• Service Pack 3 has not finished click OK to undo the changes that have been made

  Internet Exolorer 8, service Pack2 installed.  Tent to download and install service pack 3 again, Error Codes: several years ago

  Not enough free space.  Free storage, Total currently 6.06 GB GB 32.3.  HP pavilion 551w.

  Error codes: 11/10/09 OX80070641, same code on 29/09/12

  04/07/13 code OX8024600

  Remove Service pack 3 and reinstalled several days ago:

  "Preparing for download.

  Backup of files

  SP3 backup file. CAB

  Backup registry

  Creation of Restore Points

  Download Service Pack 3

  The initialization of the made installition

  Win SP3 installation

  SP3 Setup file. CAB

  Error installing service pack 3 Service pack 3 installation did not complete.

  Select 'OK' to undo the changes that have been made.

  Access denied»

  Firewall and anti virus disabled for installation.  Graphic bar showed about 75 to 80% installation complete.

  So far I have not checked to undo changes.  With the od SP3 download I show 5.82 GB of free space.

  As I have not checked to undo the changes, no error code appears for this latest attempt to download and install SP3.

  When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed"
  http://support.Microsoft.com/kb/949377

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Error message when you try to install Windows XP SP3: "you don't have enough disk space on % lecteur_systeme % to archive the uninstall files.
  http://support.Microsoft.com/kb/949375/

  Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
  http://support.Microsoft.com/kb/949384/