Seems one of the MS three a virus updates, KB2467173, ATI Driver, or Brother printer driver

Similar Questions

• In the register of Mozilla plugins cannot be deleted but one blocks the installation of MS Silverlight Update. Any suggestions?

  Microsoft has tried to update Siverlight to recent weeks - each default time.
  It is said that HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@Microsoft.com/NpCtrl,version=1.0 is the problem.
  I tried to remove it & the whole key to Mozilla, but I get "error while deleting key. "Access is denied", in all cases. There are 14 products under MozillaPlugins.

  I reinstalled Firefox to see if it would "kickstart" the chain, without success.

  (Default) MozillaPlugins:Name; Type: REG_SZ; Data: (value not set).
  Windows 7 Edition Home Premium.

  I am the main administrator - confirmed in cmd - but everything I enter permissions is denied.

  You will need to change the permissions for this key via the context menu.

  See also:

  • http://blogs.msdn.com/b/rpomeroy/archive/2008/06/10/how-to-manually-clean-up-a-bad-Silverlight-installation.aspx
  • http://support.Microsoft.com/kb/2608523

• My 'C' drive is almost full to bursting. Can I transfer some of the old windows after have updated them my drive "D"?

  My computer shows that my 'C' drive is almost full and advised me to transfer some of the programs on. But going through the list, I discovered that most of the proms has in my 'C' drive are windows, most programs had been updated but with different codes. I want to transfer or delete, but I don't know which of them can be done safely without affecting my computer work?

  Concerning
  Philip Tan

  Hello PhilipTanams,

  You will not be able to move the files to the C: drive on another drive Windows. All Windows files must be in the C: drive.

  Method 1:

  If you have personal files or data, you can move these files to another drive that increases the size of the C: drive by adding
  Method 2:

  If you have any other partition which has an empty space in it, you can extend the C: drive by adding the empty spaces to the C: drive.

  See the links to find out how to extend the partition of drive.

  Extend a Basic Volume in Windows 7

  Expand the disk volume using the command line

• DeskJet 940c now prints only black and the roses of the cartridge three colors. How to fix?

  Windows XP, no error message. New drivers, then software update from HP, reinstall printer driver. New cartridge is same as cartridge that has begun to do that, so I don't think it's cartridges.  The former was relatively new and unused.

  I tried everything for Self-Help to find out the cause and get the solution.  Will appreciate the known solutions.  Thank you.

  After continuing checking the new drivers, etc...  I tried something that should be obvious.

  The cartridge three original colors in full, 50% was only pink printing.  Changed to NEWLY opened cartridge: who would have thought a cartridge newly opened with 90% of ink indicated, would not print pink, while the first new cartridge print pink single - as well...

  Dazzling idea : tried yet opened a 2nd cartridge three colors, and it prints correctly.

  A cartridge on the set, never opened, was obviously NOT COMPLETE with all the colors...  It happens, but this is the first time for me since 1996.  Thank you for reading, the original - thought I should know all, "user error".  If this never happens to you, you will have heard about this already!  I hope it doesn't happen, lost two days on this subject...  See you soon!

• Unable to connect to the wireless network after Windows update

  Original title: after receiving an update from Microsoft last week, my wireless is not working. He died immediately after the update. Why?

  My wireless does not recognize any of the wireless networks that are in my area. The driver manager indicates that the wireless driver works correctly. The wizard does not work and the Center wireless says that it cannot solve the problem.

  Hi JeffreySessions,

  ·         Do you have update installed?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 2:  Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Update the latest drivers for the network card.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Follow the steps in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=tab04

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• ATI driver uninstalled and obtaining a black page says he needs the windows disc to fix the problem.

  Original title: Windows Vista Home Premium with upgrade

  I tried to update my ATI driver, and it got uninstalled. Now windows will not open. Black page says he needs the windows disc to fix the problem. The drive came with my computer. Download driver somewhere?                                                                                                                                                                         I am running windows Vista Home Premium with upgrade.

  Thanks Gene

  Hello Gene,

  You can try to perform a startup repair and see if it helps. You can check if your system has the integrated system recovery option to perform the Startup Repair. You can check in the advanced boot option to see if you have an option to fix the computer to perform the Startup Repair.

  You can read the following article to get started in the advanced boot options.

  Startup options (including safe mode)

  If this isn't the case, you have a Vista installation disk to perform the same.

  For more information, you can consult the following articles:

  What are the system recovery options in Windows Vista?

  Startup Repair: frequently asked questions

  Hope this information is useful.

• Puzzled - one of the three videos will not play

  Hello! I have trouble getting one of the three that lists Flash (swf) video to play. 3 all play very well locally (swf files and html pages via a browser and window when tested in Flash), but we'll not play once uploaded to the server (Network Solutions). Loads of skin (Controller), but not the video itself – link: http://tripartners.com/Pages/NWDLS/NWDLS_Video_2011/Session1/NWDLS_Session1_Part2.html all 3 went through the exact same process at the same time. As the video plays well locally, and because I re-processed the capricious video over and over again to eliminate the error on my part, I am totally stumped.

  Thank you very much for any assistance you can provide.

  See things, fix its video 2/3 which is the problem?

  I'm using a web debugging tool called Fiddler, and he shows me the URLS of the videos you upload. For the 2nd video, it seems abnormally long, as if you entered it incorrectly. It may have nothing to do with the way that you encoded - video is on the place where he is, or where your Flash file "tent" to locate.

  Video of 2 URL:

  http://tripartners.com/users/judithleslie/1_Websites/TRI_NWDLS/TRI_NWDLS/Web-content/pages /NWDLS/NWDLS_Video_2011/Session1/NWDLS%20Session%201%20Part%202%20of%203.flv

  Also, I got recommned not to use spaces in your file names - instead, use an underscore ('_').

  So I would say that you check the location of your video on your server and then to be sure it's the right URL that you use when the definition that you use only the video for the FLVPlayBack component.

• one of the three conditions, return true

  I just saw the GOLD (Boolean Express) where if one of the TWO conditions, then return true to stop the labview.

  Y does it have that provides all Boolean Express if one of THREE conditions met, return true?

  type in compound under the rapid fall.

• Cannot access my Windows Live Mail. Gives me the message "one of the installation files seems to be corrupted. Error: 0 x 80070002.

  Cannot access my Windows Live Mail. Gives me the message "one of the installation files seems to be corrupted. Error: 0 x 80070002. Source: WaitForCatalogue.

  original title: error 8 x 0070002

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• Whenever I have shut down my computer it detects 2 updates. I checked the updates of Windows and it seems to be the same ones every day.

  Whenever I have shut down my computer it detects 2 updates. I checked the updates of Windows and it seems to be the same ones every day. And they did so why they keep needing to be updated? They are: a security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864) and: Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2539631)

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  UTC/GMT is 16:02 Friday, September 23, 2011

• My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken. This seems to be the only program with problems. All the answers?

  My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken.  This seems to be the only program with problems. All the answers?

  Hi retiredinflorida,

  Welcome to Microsoft Vista answers Forum!
   
  It is a known issue using IntelliPoint from Microsoft and Quicken software drivers.  Both parties are aware of the problem and as soon as a hotfix or patch for this problem is available it will be displayed on the Quicken Web site so check with their website on a regular basis.
   
  However, if the Microsoft Wireless Mouse 5000 problems in other applications, you can check the links below.

  The Microsoft wireless mouse does not work as expected if:

  You may want to consider this link to fix the problem: http://support.microsoft.com/default.aspx?scid=kb; EN-US; 838398

  In the case want ot uninstall and reinstall the mouse drivrs use this link: http://www.microsoft.com/hardware/windows7/support.mspx

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and let us know
  what you think

• Home computer connected to the network request username and pass on only one of the three computers.

  I got my wife connected to my home network running Windows Media Center on Windows 7 laptop and it could be accessed by all computers on my home network. I replaced the laptop of the woman with a new laptop which has Windows 7. During the installation of Windows 7, it automatically set to join my home network. Now all but one of my other computers can access files/folders on the new laptop without a user name or password. But when I try to access the new laptop from pc it ask me a username and password. I never put in place of user names with password on all computers. I can go in the new laptop and send files and public folders from the pc of one of the problems, but not the reverse. Someone has an idea how I can fix this where it is not regarding the username and password on this computer?

  Hello

  Sorry for the late reply.

   

  Method 1
  I suggest you to follow the suggestion of Gloria replied on June 16, 2009 and check if it helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Networking/cannot-turn-off-or-disable-password-protected/a3e4f6cb-FBDF-4F15-bb93-38cbf6fac833

   

  Method 2
  You can read the article.
  Identify and resolve home network problems
  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

   

  Method 3
  Temporary disabling of security software.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

   

  See also:

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Please let us know if the problem persists. We will be happy to help you further.

  Thank you.

• Does resettlement as one of the three licenses with the Windows 7 Family Pack Upgrade?

  I have installed without problem on two computers and you want to install on a third computer in the future after having finished building.

  If I have reinstall it on one of the first two computers will I have troubles installing on the third?

  How to keep track of how many times I've used this upgrade Microsoft?  Is it connected to the key that has the earlier version of Windows?  So I use the same three keys of Windows XP update will work even if I need to reinstall?

  No, because this is the same computer, so it works very well. Unused facilities / additional licenses will not be exhausted.

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the entire thing on

  I am new to use the forums.  How to start a discussion?  The ICO next which is grayed out.

  I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the whole thing and put it in a new, m not corrupted project?

  Hello and welcome.

  I feel for you after reading your story, however, it that are supposed to do? It is a forum for Dreamweaver and to my knowledge, Dreamweaver has no functionality called the chronology.

  Could you please explain the problem so that we can understand?