selected boot image is not authenticated

Similar Questions

• Selected boot image is not authenticated. Press on < enter > to continue

  I just removed the stock HARD disc that came with my M4-1015 x and now I am trying to install windows 7 on the SSD that I replaced it with. However, when you start up I get the message "the selected boot image is not authenticated to. "Press on < enter > to continue" when the laptop tries to read the operating system from the disk. I've never seen this before... any help? (This is a legitimate copy of Windows 7 DVD)

  Thank you.

  I fixed it. Of the secureboot to activate and deactivate bootmode inherited so he can work.

• "HP Pavilion X 360 13": HP Pavilion X 360 13 ' selected boot Image is not authenticated. Press on &lt; enter &gt; to continue

  Hi all! I was wondering if someone could help me. My laptop started to tell the boot image selected is not authenticated is and asks me to press on enter. However, whenever I do this, the laptop is just turns off. I have read through the forums and tried all unique methos. No matter what I do, I can't access and type of BIOS or diagnostic, everything I chose makes it go to this screen. If you could give me any help, I'll be very grateful. It comes preinstalled with Windows 8 and has since then been upgrade Windows 10.  Also, when I turn on the computer, I heard a strange buzzing of the mouse pad area, what is?

  Thank you!

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Oops, I didn't add this.

  Oops, I didn't add this.

  Hey there! @mycatdaphne, thanks for the reply.

  Thank you to perform troubleshooting.

  As you mentioned that you still can not access BIOS.

  It's a hardware issue please contact HP support for service options.

  Link to contact HP: http://hp.care/2bkTGBQ

  Have a great day!

• Pavilion 17-g108na: selected boot Image is not authenticated

  Dear Sirs

  I provide a laptop HP with windows 7 in the course of running for my clients.

  I bought a HP Pavilion 17-g108na and bought Windows 764 bit on a DVD.

  When I want to boot from the DVD, I get the error message:

  "The boot image selected is not authenticated to. Press enter to continue. »

  Is someone can you please tell me what I should do to get windows 7 installed.

  This would be much appreciated!

  Best regards, Chris

  Hi Chris,

  If you want to install Windows 7, need to disable secureboot and activate the start mode inherited so he could run.

  

• n005tx Pavilion 15: "selected image is not authenticated to. "Press on enter continue" at the start of the

  Hi all, I have a pavilion laptop g6 - 2253ca who works with a windows 8 (64-bit). I have a strange problem since this morning and an error msg "selected image is not authenticated to. "press on enter continue ' that appears when I try to start. I have not installed program on my computer before it happens. I just sailed on the Internet and all of a sudden the screen is grey and the msg appeared on this subject.

  I went on several forums for information on this subject. That's what I did:

  -hard reset
  -Restart and boot into BIOS
  -Disable secureboot and enable legacy initialization
  -Press F10 to save and exit BIOS

  -Restart

  -the system asked me to enter a digit of 4 password and press ENTER to apply the changes

  -done, but I got stuck another MSG: "no boot device, insert the boot disk and press any key.

  Not able to find something else to move to another service I thought that maybe the value default bootable device was not the HARD disk if:
  -I restart and boot into the boot F9 Manager
  -does not not the same msg (no boot device, insert the startup disk and press a key) is displayed.

  Try to run the auto repair using the F11 Recovery Manager, but I can't start on it during startup.

  So, what should I do now? I am really disappointed...

  Hello

  Try loading at F2 run check disk test hard if that passes you will need a recovery disk. If the hard drive is not detected reinsert the disc hard try to rerun the test if you have the same hard disk problem that went wrong to replace the drive. Please call HP technical support check for warranty and the part replaced.

• HP Pavilion G6-2292SA: selected image is not authenticated

  A few months ago my laptop came with the message 'selected image is not authenticated to' but I just left him because I was in the middle of loads of deadlines United and had no time to try to sort them. I turned on my laptop about once or twice since then to see if there is no change, but he always showed the same message. When I turned it on today to try to sort it's just come up with a white screen, the black light is turned on and when I press like f10 things happens at the bottom of the screen with "F10"... BIOS Setup Options"but that's all that I can see, I can't seen of these 'options '. Pleaaaase help

  @sofiabruna,

  Thanks for posting back.  Here is the link to your maintenance and service guide.  Here the reference numbers and support for hard drives.  Then, you can contact HP shopping for pricing.

  Maintenance and Service Guide

  Here is the link to HP Shopping.

  Thanks again for posting and have a great day.

• By selecting multiple images does not

  I am a beginner, through Classroom in a Book, Lesson 5. I'm trying to select image 56 on three different lines. When I use the SHIFT key, it highlights the complete on lines 2 and 3 motion tween. I need only frame 56 selected. What happens here? Can someone tell me why is to select the entire line?

  It is likely that it doesn't matter that the entire span is enabled, when you make a change to something with a motion tween, only the current frame is changed, even if the entire duration is selected.

  For peace of mind you can click and drag, cell framework in the first layer down to the same framework in the last cell layer.

  But as I said, I don't think it will be question anyway.

• 15 - f233wm: cannot install boot CD Linux - image will not authenticate

  I activated the inheritance initialization and secure boot disabled in BIOS and then saved and restarted and also upgraded to the latest version of the BIOS F.29, then press ESC-> F9 on startup to select CD-ROM, I get "selected image is not authenticated to. Hit to continue.

  It is a good of Jessie Debian production x 64 install DVD used successfully on lots of boxes. I also tried an external USB CD-ROM, with the same result.

  My original and fully patched and updated Windows OS 10 boots yet, but I need Linux on this box. I want to use EasyBCD to manage the boot process, but I still need to get the boot CD to install on a new partition I created after my main of Windows NTFS partition resizing.

  It seems that the boot order is set to the OS boot manager. You must move the pointer to the legacy options. That's why it shows boot UEFI options because the default option is the Boot Manager.

• Update CAN´t SRW2024 to firmware 1.2.2 without boot image "runtop_boot - 101.rfb".

  Hello

  I need a little upgrade to a SRW2024 assistance to the latest firmware.

  I started with the upgrade to v.1.2.2, but just started switch to reboot all the time, I flashed back to 1.0.0.86 xmodem console.

  On the FAQ of Cisco theres a guide how to change the SRW2024. The guide says that I have to update the boot image before flash image, but the boot image is not available on the download section of cisco´s more.

  Can you please help me with the boot image. (runtop_boot - 101.rfb)

  Thank you.

  Hello

  I hope you called the HWC, since they have not yet responded to this request.

  http://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

  Best regards, Dave

• HP Pavilion 15 laptop: boot image selected is not authenticated

  When you turn on the laptop says «boot image selected not to is not authenticated...» "What do I do?

  It's your computer laptop one with a removable battery?

  Remove the battery, unplug the power adapter and press and hold the power button for about 15 seconds. That will reset the hardware of the laptop.

  Put the battery back in and press the power button.

  Post your results here if you please.

• HP 250 g4: boot image selected is not authenticated

  Hello, my computer has problems from the beginning. One day, I restart my pc and this appears:
  "Boot device not found.
  Please install an operating system on your hard drive
  Hard drive (3F0)
  The F2 System Diagnostics.
  So I did all the tests diagnostic tests and all translate "SUCCESS."
  I called support and they are sending me the two DVD «Recovery media for windows 10 products»
  I followed the instructions and put the first DVD, and then I started the pc. At first, it seems that the cd will then start appears this sentence "the boot image selected is not authenticated to. Press to continue.
  What could I do?

  Hello

  Try the following.

  Judgment of the laptop.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Bios Menu ( f10 ).

  Under the System Configuration tab, expand the Boot Options Menu.

  Select 'Clear all secure startup keys' and click Ok

  Select "load factory defaults keys HP", and then select Ok

  Save the changes that you exit the bios and try to re-run the recovery DVDs.

  If you still receive the error, return to the Bios Menu, System Configuration tab and expand the Boot Options Menu.

  Activate 'Legact Support' and save the changes that you exit bios - you will then need to enter a PIN of 4 numbers displayed on the screen to confirm the changes to the settings - enter the code and press ENTER.

  Try to run the recovery dvd.

  Kind regards

  DP - K

• HP ENVY m6: boot image selected is not authenticated

  I need advice. "" When I turn on my laptop (HP ENVY, WINNING 8) computer I get the following message: "boot device could not authenticate press enter to ' when I have c: it stops. I can't boot into recovery mode either. What the hell went wrong?

  Well, I decided to bring it to the store from my friend, he is a technician and then of course he actually decided that he would start the operating system. He wasn't healthy but, we tried a refresh, but it stopped in the middle of it due to a disk hard w / the question. After that some of diagnotics hard drive was the culprit, so after a permutation we run once again. I'm fine w / start again as it works now. And I called HP ordered my backup disks. Thanks for the help, I would have had the discs that we would have come to the same conclusion I'm sure.

• When I change my background in my settings, it always enlarges the image no matter what I have to do select. He's not mosaic, Center, made

  When I change my background in my settings, it always enlarges the image no matter what I have to do select.  It will not tile, Center, adjustment etc. Only, even with slideshows, stretch my photos.  Is there some setting that is locked I need to uncheck?  Help!

  Original title:

  Computer background

  Hello

  • If it works well before?
  • What were the changes made before the problem occurred?

  You can view these methods:

  Method 1:

  I recommend you perform the clean boot and check.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  If the problem persists in safe mode, create a new user account and log on to it
  see How to create and configure the user accounts in Windows XP .
  b. connect on the new user account and check if the problem persists.

• I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3.

  I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  tupensi wrote:

  use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  Then you should post on the Microsoft Mac forums where to hang out the gurus of the Office, as is the Microsoft product, with that you are having problems:

  http://answers.Microsoft.com/en-us/Mac

• HAB check failed for start / could not validate the boot image

  Hello

  I have neglected my E bike for a few weeks and when I loaded and it fed today, it shows a menu and:

  HAB check failed to start

  could not validate the boot image

  Tried all the menu items and none of them worked. For me, it's very odd behavior, because BONE is not affected since the last Android 5 update, several months ago.

  Are there opportunities for the device?

  If you can't make an external reset via hardware buttons, then your phone will have to service.