selection of rows in table
I know this was asked (I read all the other posts on the same question), but I have no luck with the 'official' way to do it.
I'm doing a row of a table (in hot mode) to become selected if you click on one of its cells. Here is my point:
int CVICALLBACK TableTest (int panel, int control, int event, void *callbackData, int eventData1, int eventData2) { Point cell; switch (event) { case EVENT_LEFT_CLICK: GetTableCellFromPoint(panel,control,MakePoint(eventData2,eventData1),&cell); if (cell.x == 0 && cell.y == 0) return 1; // Not on a row/col SetTableSelection(panel,control,VAL_TABLE_ROW_RANGE(cell.y)); break; } return 0;
What I see, is that the just SetTableSelection is not what it is supposed to do. I can break the function to the GetTableCellFromPoint and I can see the line concerned implement cell.y, but then selecting the line fails.
I found a good comment on the other thread about the mode of control of the table. This poster pointed out that, if the table is in non-indicateur mode, my reminder must swallow the event. OK, I tried and it works somehow. I can see the selected line, but it's a strange effect highlighted, not a dark solid grey cell background. See attachment (I've highlighted the line that was clicked).
Which leads to more questions. On a hot table, with traditional events which don't are NOT swallowed, event that creates the selection dark grey background of a cell?
To smile, I also tried to put my table saw mode and do not swallow all of the events. But here there is no selection at all.
So I'm just very confused about this. What I am doing wrong?
I don't think you're doing something wrong, apart from the fact that you're not swallowing the event when you change the selection. But even if your code does not she, you said that you have done this anyway, so it's probably a moot point.
On the other hand, I don't think you need to swallow the event when the user clicks on a row or column. As your reminder override mouse click in this case, I think you should allow the table to manage the event. Also, I think that your condition should be (cell.x == 0 | cell.y == 0) instead - the difference between the two conditions occurs when the user clicks on a row or column header and the table must already do what you want it to do in this case.
The only reason that you see the outline instead of the inversion of color is because it's as if the table is not the active control in the Panel. And that's how all the table selections are drawn when the table is not the focus. If you tab through the table, after you change the selection is not the change of plans? In addition, if you try to run a program example with a table (for example, samples\userint\gridview.prj). As you move the selection of this table and then tab away from the control, can't the same thing?
Luis
Tags: NI Software
Similar Questions
-
Popup event on the selection of rows in table tree
I use jdev 11.1.1.7
I followed below page to pass parameters between the regions. It works fine if I use a button to trigger the event & pass the id of selected in a table of the tree line.
Tech Blog of Rohan Walia: events background - Basic step by step: ADF
I wanted to avoid button, I'm trying to pass data directly on the selection of rows in the tree.
< eventBinding id = "eventBinding".
Listener = "org. Apache.MyFaces.Trinidad.Event.SelectionListener">
" < events xmlns =" http://xmlns.Oracle.com/ADFM/contextualEvent "> "
< name of event = 'FireEvent '.
customPayLoad="#{pageFlowScope.ManageOrgsBean.selectedID}"/ >
< / events >
< / eventBinding >
< / links >
" < events xmlns =" http://xmlns.Oracle.com/ADFM/contextualEvent "> "
< name of event = 'FireEvent '.
customPayLoad="#{pageFlowScope.ManageOrgsBean.selectedID}"/ >
< / events >
I get a NPE in the 3rd line below:
{} public void onTreeNodeSelect (SelectionEvent selectionEvent)
BindingContainer DCBindingContainer = ADFUtils.getDCBindingContainer ();
JUEventBinding eventBinding = (JUEventBinding) bindingContainer.get ("FireEvent");
SelectionListener selectionListener (SelectionListener) = eventBinding.getListener (); NPE
selectionListener.processSelection (selectionEvent);
}
Any idea? Thank you.
Try with:
JUEventBinding eventBinding = (JUEventBinding) bindingContainer.get ('eventBinding');
-
Turn off the ADF parasmo tab based on the selection of rows in table
Hello
We have page ADF, which consists of a table within a collection of panels, which in turn is inside a Panel tab that user can select several rows in this table. There is also a second tab that you want to activate only if the user has selected a single line in the table. This should be disabled if several lines are selected in the table. Please let me know how this can be accomplished. The selection of multiple rows in the table is a must for users.
I use jDeveloper 11.1.2.3.0
Thank you
Ashwin
Published by: 989372 on April 24, 2013 08:22Hello
1. set up the table for selection of rows multi
2. If you initially created the unique selection table, delete the SelectionListener entry added by JDeveloper
3. create a custom pointing to a managed bean selection listener
4. in the selection listener, call getComponent on the selection event (http://myfaces.apache.org/trinidad/trinidad-api/apidocs/org/apache/myfaces/trinidad/event/SelectionEvent.html) and cast to richeTableau
5. on rich table Manager, call getSelectedRowKeys (http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10684/oracle/adf/view/rich/component/rich/data/RichTable.html)
6. If there is more than one key of the selected row, set a property of a managed bean (for example showTab) false and PPR Panel tab
7 use the property "off" from the showDetailItem (http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_showDetailItem.html) to point to the property Boolean managed beanFrank
-
Toggle the button toolbar on the selection of rows in table
Hi all
I have a problem with activation and deactivation of the toolbar button when the table row is selected... Here's the deal:
I have a toolbar button named "activate" I want to activate only when the selected table line has say for example 'description' field is not empty. I'm looking for a solution so that I can say declaratively:
< disabled af:commandToolbarButton = "#{I'M looking FOR THIS CASE =="} "/ >"
I tried using #{bindings.activateAttributeFromSameIterator} thinking that when the selection on the row in the table is changed, the change is reflected also and I will get the result, but without success (that link was nothing)... I also updated partialTriggers this toolbar button.
I would appreciate if anyone can shed some light on this...
Thank youHello
create a binding of the attributeValue to the descriptor field using the "Bindings" tab in the Visual Editor. In the connections section, click the Green plus icon, choose generic and attributeValue Bindings are included. Select the iterator used by the table and select the attribute "descriptor" (the name of the attribute that you mentioned). Then change
TO
Frank
-
12.1.3 JDeveloper and table for selection of rows in Internet Explorer 9
Configuration: Windows 7, Internet Explorer 9 12.1.3, JDeveloper (sorry, the company standard for now)
I have problems of selection of rows in a table when you use IE9 (disabled compatibility view) as my browser. I created a simple application to test. I did the following:
1 created a new web application from merger in JDev 12.1.3.
2 objects of business created for 1 table
3. create a simple page (jspx) for testing
4 dropped the table on the side of Center of a PanelStretchLayout on the page as a table read-only with sorting and single-row selection enabled.
5. changed the property table DisplayRow selected. No other property has changed.
When I run the application, the table appears and is filled as expected. However, after you select at random the rows in the table, the application will lose focus and become hidden behind other applications on my desktop. If I bring the application in the foreground and try again the same thing will happen. After the selections of line 1 X application will disappear from the screen.
I decided to reproduce the JDev 12.1.2 test. In JDev 12.1.2 the application behaves as expected. Never, the application loses focus after several attempts to select a field.
I wonder if something in the hotfix released to correct the 12 c/Internet Explorer 11 questions is the culprit.
Everyone knows about this problem? I hope there is a change of ownership that I do in 12.1.3 to solve the problem.
Thanks in advance!
A solution that seems to work...
Add a clientListener inside the table
Add a javascript method
function handleTableSelection() { window.focus(); }
Just seems to bring the window to the front without changing anything, as far as I can tell.
-
Select the row of the table using radiobutton
Dear all,
I want to have a column that will a radiobutton and button in the page. When the user clicks the button, so I want a task by taking the data from the selected row. I kept the rows in the table to a single selection. When the user selects the row (without selecting the radiobutton control), then I can also get the current line and get the data from that. But when the user presses the button (in its actionlistener) then how can I know if the user has selected the radiobutton control or not in the current line.
Can someone give me guidance in this problem...
Kind regards
David
JDeveloper 11.1.1.4.0Santosh,
where is the property of the value of the bound radio button for? It is an attribute of the line? If so you can access the value via the current line.Timo
-
[JS] select multiple rows in a table
Hi guys,.
Is it possible to select several lines in a table? If I pass a reference table of the lines to the app.select () method, it fails.
For that which is ok, but not for two or more. The lines are next to that them not chnge a thing.
var t = ....tables[0] //a given reference to a table app.select([t.rows[1], t.rows[2], t.rows[3]]) //Error > Expected array of objects but received (Row,Row,Row)
App.Select(t.Rows[1]) works very well. But when I want to select multiple lines, that is not.
Any advice?
TIA Loïc
Hey!
Try selecting each line separately:
var myT = app.selection[0].tables[0]; myT.rows[0].select(); myT.rows[1].select(SelectionOptions.ADD_TO);
tomaxxi
-
Add line before or after the selected line in af:Table
Hello
Please let me know how we can add a line before or after the selected line in the display: table.
Currently I have a table with 2 buttons on toolbar. 1. Add 2. Add after.
The user selects the row and click a button AddBefore and after... then, a blank line must have added in the table according to the clicked button.
Please suggest me your entries.
Thank you
Kiranchk this
http://mjabr.WordPress.com/2011/07/02/how-to-control-the-location-of-the-new-row-in-aftable/ -
How can I default first line below the selected line in the table of the adf
Hello
I use Jdeveloper 11 g,
I created Adf quick query with table and changed selectionListener table as #{CustRMMap.onRMGroupNameChange}.
and when I click on find fast query no row is selected.
I want the first row to be selected / highlighted by default when I click search.
Patel ImranYou can also set an attributeValue in pagedef.xml
bind this attributeValue with column of your table. This sets the value of the selected line to the variable attruibute.
Will now link this with your desired component attributeValue.
Put partial trigger on the component that should display this value.
This will save you to write custom code and use the default table selection listener property, which marks the first default line.Apart from this, if you want to govern the first default line of managed bean selection use this code...
+ _Table = selectionEvent.getSource ((richeTableau)) richeTableau; + *
+ / / the model in the Collection is the object that provides the structured data.
+ / / for rendering table +.
+ TableModel CollectionModel = table.getValue ((CollectionModel)); + *
+ / / the ADF object that implements the CollectionModel is JUCtrlHierBinding. IT +.
+ / /is wrapped by the CollectionModel API.
+ JUCtrlHierBinding adfTableBinding = tableModel.getWrappedData ((JUCtrlHierBinding)); + *
+ / / Acess the iterator ADF, binding that is used with the binding table ADF +.
+ DCIteratorBinding tableIteratorBinding = adfTableBinding.getDCIteratorBinding (); + *+ / / the role of this method is to synchronize the table feature selection +.
+ / / with the selection of the model of the ADF +.
+ Object selectedRowData = table.getSelectedRowData (); + *
+ / / cast of JUCtrlHierNodeBinding, which is the subject of the ADF that is +.
+ / line/a +.
+ JUCtrlHierNodeBinding nodeBinding = selectedRowData (JUCtrlHierNodeBinding); + *
+ / / get the key of the node binding line and set it as the current line in the +.
+ / / iterator +.
+ Key rwKey = nodeBinding.getRowKey (); + *
tableIteratorBinding.setCurrentRowWithKey (rwKey.toStringFormat (true)); + *and another way on the right is a custom like this code:
+ public void setDefaultRow (int count) {/ / call this method your method of selection custom, rom pass the line of the line to select index. count = 0, will select first row + *}
+ try {+ *}
Object oldRowKey = tblMag.getRowKey (); *
+ try {+ *}
This..getSelectedRowKeys () .clear ();
*
* +} catch (System.Exception e) {+ *}
System.out.println (e.getMessage ()); *
+}+
This..setRowIndex (count);
*
RKS RowKeySet =. getSelectedRowKeys();
*
(RKS). Add(. getRowKey());
*
RKS =. getSelectedRowKeys();
*
+.setRowKey (oldRowKey); +
* +} catch (System.Exception e) {+ *}
System.out.println ("error:" e.getMessage ()); + *
+}+
+}+Hope this helps
Concerning
Maryline Roussel -
Multiple selection of records in table advanced to update in the Search Page.
Hi all
I write the code below, to select multiple records in table advanced for the update after clicking on the button update in the Search Page.
I write this code in Processform request, but I got the exception when I run the code below.
If (PageContext.GetParameter ("UpdateOnSeaBtn")! = null)
{
Am = (XxSupppacklistAMImpl) pageContext.getApplicationModule (webBean) XxSupppacklistAMImpl;
am.saveRollback ();
OAViewObjectImpl upDtVO = (OAViewObjectImpl) am.findViewObject ("PackingListSeaVO");
PackingListSeaVORowImpl line;
HashMap vParm = new HashMap();
Row [] rows = upDtVO.getFilteredRows ("SingleSelection", "Y");
int fetCount = upDtVO.getRowCount ();
System.out.println ("Teh recovered rowcount is:," + fetCount);
RowSetIterator multiIter;
multiIter = upDtVO.createRowSetIterator ("multiIter");
multiIter.setRangeStart (0);
multiIter.setRangeSize (fetCount);
for (int i = 0; i < fetCount; i ++)
{
Row = (PackingListSeaVORowImpl) multiIter.getRowAtRangeIndex (i);
If (Row.GetAttribute ("SingleSelection")! = null)
{
If (Row.GetAttribute ("ItemNumber")! = null)
{
Object vitemNum = row.getAttribute ("ItemNumber");
System.out.println ("The selected element Num is:," + vitemNum);
vParm.put ("ItemNumber", vitemNum);
pageContext.setForwardURL ("OA.jsp?page=/xxfls/oracle/apps/po/packlist/webui/XxSuppalistcrealistPG", / / here, I got the exception below)
NULL,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
NULL,
vParm,
false, / / RetainAM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
}
}
}
multiIter.closeRowSetIterator ();
}
}
}
could you, please, can someone help on this.
I got below exception to the side server when it is run the code above.
Error (125,48): method setForwardURL (java.lang.String, null, null, byte, java.util.HashMap, boolean, java.lang.String, byte) is not not in the interface oracle.apps.fnd.framework.webui.OAPageContext
Kind regardsHello
832859 wrote:
for (int i = 0; i)<>
{
Row = (PackingListSeaVORowImpl) multiIter.getRowAtRangeIndex (i);
If (Row.GetAttribute ("SingleSelection")! = null)
{
If (Row.GetAttribute ("ItemNumber")! = null)
{
Object vitemNum = row.getAttribute ("ItemNumber");
System.out.println ("The selected element Num is:," + vitemNum);
vParm.put ("ItemNumber", vitemNum);> pageContext.setForwardURL"OA.jsp.page=/xxfls/oracle/apps/po/packlist/webui/XxSuppalistcrealistPG",//here I got below exception
NULL,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
NULL,
vParm,
false, / / RetainAM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
}
}
}-Here is you call pageContext.setForwardURL loop.
>I got below exception to the side server when it is run the code above.
Error (125,48): method setForwardURL (java.lang.String, null, null, byte, java.util.HashMap, boolean, java.lang.String, byte) is not not in the interface oracle.apps.fnd.framework.webui.OAPageContext-check 5th param should nt be vParm if it is null
Finally... After the for loop ends call... y bcz assume this page grouped 10 rows can he navigate both on the next page...:
pageContext.setForwardURL ("OA.jsp?page=/xxfls/oracle/apps/po/packlist/webui/XxSuppalistcrealistPG",
NULL,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
NULL,
NULL,
false, / / RetainAM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
}Concerning
Meher IrkPublished by: Meher Irk on March 31, 2011 19:54
-
Toggle buttons control according to the selected line in the table?
Hello
I have used JDev 11.1.1.2.0
On my main page, it has a query section and view the result to a component of the lookup table and also has functioning as (update/deletion) buttons in the toolbar.
I want to toggle buttons operating according to some value of the selected line in the table, and I searched on the OTN forum, found more than issues like that, but seemed no found a good solution.
The table is a unique and has a status column selection, its data type is integer, and I want to activate the buttons when the value of the status field of the selected line is 0 or 1, disable the buttons when the State value is other values.
Code of the table as:
< af:table value = "#{bindings." Var VO1.collectionModel}"="row ".
lines = ' #{bindings. " VO1.rangeSize}.
emptyText = "#{bindingsVO1.viewable?" '} ". No data to display. ': 'Access Denied. »} »
fetchSize = "#{bindings." VO1.rangeSize}.
rowBandingInterval = '0 '.
filterModel = "#{bindings." VOCriteriaQuery.queryDescriptor}.
queryListener = ' #{bindings. " VOCriteriaQuery.processQuery}.
filterVisible = "true" varStatus = "vs."
selectedRowKeys = ' #{bindings. " VO1.collectionModel.selectedRow}.
selectionListener = "#{bindings." VO1.collectionModel.makeCurrent}.
rowSelection = "single" id = "resId1" >
Operation code buttons like:
< af:commandToolbarButton text = "Update" id = "ctb2" action = "editDAF" / >
Any suggestions would be very helpful.
Thank you
zeroxinHello
bind to the attribute in the PageDef file for the status field. Then configure the PartialTriggers property button to point to the ID of the table. Of the disabled button property then points to the status as attribute link
#{bindings.statusField.inputValue == 'value'}
Frank
-
How to block a select statement for a table of the specified until validation line
Hello
How to block a SELECT statement for a specified row in a table until willingness to engage occure?
My procedure is part of a Stock request and if a user (X) get stock 1 piece, another user must wait for the user (Y) complete his reportoire.
So, let say my stock have 10 pencils.
When the X user starts the Stock_PLS procedure, in table Stock, line (e.g. R1) that user X should work with it, must be lock up to what the commit / rollback will appear.
procedure Stock_PLS...
Start
..
pencils: pencils-1 =;
..
End
Observation-> pencils: = 9;
This means that is a user there, run SELECT * stock of the table where rows_id = R1, SELECTION should wait the Stock_PLS started by user X will be completed (with commit or rollback) and his SELECT should return the value 9.
What I need, is that Oracle has something like LINE EXCLUSIVE TABLE LOCK, but in my situation the SELECT statement should be denied on the specified lines, until the end of the procedure.
Kind regards
MichaelHello
You can achieve this using the update with the Select clause.
You can write your select statement like this
SELECT * from stock of the table where rows_id = R1 for update; -
DataPump: Rows in tables do not match after importation
Hello
I have exported a schema 'ORAMSCA' and imported in the form of schema 'ORAMSCA_TEST151223 '. I found the difference between the rows of tables. Could you please advice.
Here are the details.
ORAMSCA_TEST151223 ORAMSCA
COUNTY OF COUNTY OF TABLE_NAME
------------------------------ ------------- ------------
2 952 3 367 OM_AUDIT_TRAIL
33 40 OM_CONFIG_OPTIONS
3 456 3 456 OM_COUNTRY_STATES
86 91 OM_ENTITY_MENU
64 69 OM_FUNFACTS
81 61 OM_INSTANCES
OM_JOBS 139 111
OM_JOB_LOGS 226 132
37 19 OM_JOB_PARAMS
15 15 OM_LICENSES
1 289 1 594 OM_LOGIN_HISTORY
OM_LOOKUP_CODES 900 904
31 31 OM_LOOKUP_TYPES
9 625 8 225 OM_ORG_ORGANIZATIONS
36 36 OM_ROLE_RIGHTS
29 48 OM_USERS
728 1 983 OM_USER_ENTITY_MENU_ACCESS
OM_USER_ORGANIZATION_ACCESS 40 156Exported log file:
;;;
Export: Release 11.2.0.1.0 - Production on Fri Dec 18 09:22:16 2015
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
;;;
Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
Start "SYSTEM". "" SYS_EXPORT_SCHEMA_01 ": System / * schema = oramsca = ORAMSCA_TEST1.dmp = expdp.log = DUMP directory logfile dumpfile
Current estimation using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 2,937 MB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/TABLESPACE_QUOTA
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/DB_LINK
Object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE of treatment
Object type SCHEMA_EXPORT/TABLE/TABLE processing
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/treatment
Object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment
Object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC of treatment
Object type SCHEMA_EXPORT/FUNCTION/treatment
Object type SCHEMA_EXPORT/PROCEDURE/treatment PROCEDURE
Processing object type SCHEMA_EXPORT/PACKAGE/COMPILE_PACKAGE/PACKAGE_SPEC/ALTER_PACKAGE_SPEC
Object type SCHEMA_EXPORT/FUNCTION/ALTER_FUNCTION of treatment
Object type SCHEMA_EXPORT/PROCEDURE/ALTER_PROCEDURE processing
Object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY of treatment
Processing object type SCHEMA_EXPORT/JAVA_SOURCE/JAVA_SOURCE
Processing object type SCHEMA_EXPORT/JAVA_CLASS/JAVA_CLASS
Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT of treatment
Object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment
. . exported "ORAMSCA." "" OM_ORG_ORGANIZATIONS "8225 lines 620,3 KB
. . exported "ORAMSCA." "" OM_AUDIT_TRAIL "3283 lines 285,2 KB
. . exported "ORAMSCA." "' OM_ENTITY_MENU ' lines of 145,2 90 KB
. . exported "ORAMSCA." "' OM_COUNTRY_STATES ' 3456 lines 186,1 KB
. . exported "ORAMSCA." "" OM_CONFIG_OPTIONS "the 40 lines 67,10 KB
. . exported "ORAMSCA." "' OM_LOGIN_HISTORY ' 118.2 lines 1525 KB
. . exported "ORAMSCA." "' OM_LOOKUP_CODES ' 904 lines 68,61 KB
. . exported "ORAMSCA." "' OM_USER_ENTITY_MENU_ACCESS ' 78.60 lines 1644 KB
. . exported "ORAMSCA." "' OM_FUNFACTS ' lines of 15,06 67 KB
. . exported "ORAMSCA." "' OM_INSTANCES ' lines of 17,37 61 KB
. . exported "ORAMSCA." "' OM_JOBS ' 111 lines 19.54 KB
. . exported "ORAMSCA." "' OM_JOB_LOGS ' 132 lines 19,02 KB
. . exported "ORAMSCA." "' OM_JOB_PARAMS ' Ko 9,726, 19 ranks
. . exported "ORAMSCA." "" OM_LICENSES "15 lines 10,25 KB
. . exported "ORAMSCA." "' OM_LOOKUP_TYPES ' 31 lines 11.50 KB
. . exported "ORAMSCA." "' OM_ROLE_RIGHTS ' 36 lines 14,43 KB
. . exported "ORAMSCA." "' OM_USERS ' 44 lines 21,57 KB
. . exported "ORAMSCA." "' OM_USER_ORGANIZATION_ACCESS ' 147 lines 15,56 KB
Main table 'SYSTEM '. "" SYS_EXPORT_SCHEMA_01 "properly load/unloaded
******************************************************************************
Empty the file system set. SYS_EXPORT_SCHEMA_01 is:
/U01/oracle11/dump/ORAMSCA_TEST1.dmp
Work 'SYSTEM '. "" SYS_EXPORT_SCHEMA_01 "carried out at 09:23:14
Import a log file:
;;;
Import: Free 11.2.0.1.0 - Production Wed Dec 23 01:00:58 2015
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
;;;
Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
Main table 'SYSTEM '. "' SYS_IMPORT_FULL_01 ' properly load/unloaded
Start "SYSTEM". "" SYS_IMPORT_FULL_01 ": System / * Directory = DUMP dumpfile = logfile = impdp.log remap_schema = ORAMSCA:ORAMSCA_TEST151223 remap_tablespace = ORAMSCA:ORAMSCA_TEST151223 expdp_ORAMSCA_151221.dmp
Processing object type SCHEMA_EXPORT/USER
ORA-31684: USER object Type: 'ORAMSCA_TEST151223' already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/TABLESPACE_QUOTA
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/DB_LINK
Object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE of treatment
Object type SCHEMA_EXPORT/TABLE/TABLE processing
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
. . imported "ORAMSCA_TEST151223." "' OM_ORG_ORGANIZATIONS ' 9625 lines 724,5 KB
. . imported "ORAMSCA_TEST151223." "' OM_AUDIT_TRAIL ' 258.6 lines 2952 KB
. . imported "ORAMSCA_TEST151223." "' OM_ENTITY_MENU ' lines of 166.7 86 KB
. . imported "ORAMSCA_TEST151223." "' OM_CONFIG_OPTIONS ' 33 lines 59,26 KB
. . imported "ORAMSCA_TEST151223." "' OM_COUNTRY_STATES ' 3456 lines 186,1 KB
. . imported "ORAMSCA_TEST151223." "' OM_LOGIN_HISTORY ' 102.8 lines 1289 KB
. . imported "ORAMSCA_TEST151223." "' OM_LOOKUP_CODES ' 900 lines 68,36 KB
. . imported "ORAMSCA_TEST151223." "' OM_USER_ENTITY_MENU_ACCESS ' 728 lines 39,46 KB
. . imported "ORAMSCA_TEST151223." "' OM_FUNFACTS ' lines of 14.87 64 KB
. . imported "ORAMSCA_TEST151223." "' OM_INSTANCES ' lines of 19.66 81 KB
. . imported "ORAMSCA_TEST151223." "' OM_JOBS ' 139 lines 22,07 KB
. . imported "ORAMSCA_TEST151223." "' OM_JOB_LOGS ' 226 KB 25,73 lines
. . imported "ORAMSCA_TEST151223." "' OM_JOB_PARAMS ' 37 lines 10,74 KB
. . imported "ORAMSCA_TEST151223." "" OM_LICENSES "15 lines 10,25 KB
. . imported "ORAMSCA_TEST151223." "' OM_LOOKUP_TYPES ' 31 lines 11.50 KB
. . imported "ORAMSCA_TEST151223." "' OM_ROLE_RIGHTS ' 36 lines 14,43 KB
. . imported "ORAMSCA_TEST151223." "' OM_USERS ' 29 ranks 19.38 KB
. . imported "ORAMSCA_TEST151223." "" OM_USER_ORGANIZATION_ACCESS "the 40 lines 10.53 KB
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/treatment
Object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment
Object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC of treatment
Object type SCHEMA_EXPORT/FUNCTION/treatment
Object type SCHEMA_EXPORT/PROCEDURE/treatment PROCEDURE
Processing object type SCHEMA_EXPORT/PACKAGE/COMPILE_PACKAGE/PACKAGE_SPEC/ALTER_PACKAGE_SPEC
Object type SCHEMA_EXPORT/FUNCTION/ALTER_FUNCTION of treatment
ORA-39083: Type than alter_function cannot be created with the object error:
ORA-04052: error occurred when searching to the top of the remote object APPS. FND_APPLICATION_ALL_VIEW@SYSTEM_LINK_OM_VISMA
ORA-00604: an error has occurred at the SQL level recursive 3
ORA-12154: TNS: could not resolve the connect identifier specified
Because sql is:
ALTER FUNCTION "ORAMSCA_TEST151223". "" OM_APPLICATION_VISMA "PLSQL_OPTIMIZE_LEVEL = 2 PLSQL_CODE_TYPE = COMPILATION INTERPRETED PLSQL_DEBUG = FALSE PLSCOPE_SETTINGS = ' IDENTIFIERS: NO ' S REUSE
ORA-39083: Type than alter_function cannot be created with the object error:
ORA-04052: error occurred when searching to the top of the remote object APPS.GL_CODE_COMBINATIONS_V@SYSTEM_LINK_OM_VISMA
ORA-00604: an error has occurred at the SQL level recursive 3
ORA-12154: TNS: could not resolve the connect identifier specified
Because sql is:
ALTER FUNCTION "ORAMSCA_TEST151223". "" OM_CODE_COMBINATION_VISMA "PLSQL_OPTIMIZE_LEVEL = 2 PLSQL_CODE_TYPE = COMPILATION INTERPRETED PLSQL_DEBUG = FALSE PLSCOPE_SETTINGS = ' IDENTIFIERS: NO ' REUS
Object type SCHEMA_EXPORT/PROCEDURE/ALTER_PROCEDURE processing
Object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY of treatment
Processing object type SCHEMA_EXPORT/JAVA_SOURCE/JAVA_SOURCE
Processing object type SCHEMA_EXPORT/JAVA_CLASS/JAVA_CLASS
Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT of treatment
Object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment
Work 'SYSTEM '. "" SYS_IMPORT_FULL_01 "finished with 3 errors at 01:01:58
Thank you
Jeremy.
Seems that you do not import the file that you exported?
Export: dumpfile = ORAMSCA_TEST1.dmp
Import: dumpfile = expdp_ORAMSCA_151221.dmp
AJ
-
Create the form for selecting data in multiple tables
Hello
I'm getting APEX for the first time and I just read 2 days dev Application Express guide
I tried to play and I can't create a report with the form that select data from several tables
What I want to achieve is a report we'll say 'USERS' makes MANAGER_ID ID, NAME, with a form that allows me to create, delete, change users
The problem is that, once the report with the form created, if I click on create (to create a user) it will ask me for id, name, and manager_id
I need a water drop down which allows me to select managers in the table manager instead of manually insert Director id
How do I do that?
Thank you!
HI Chris,
LOV will use this magic.
Search:
Kind regards
BEnjamin
-
Reg. decimal alignment in selected columns in a Table
Hi all
Can someone help me to align the cells in the selected column of the table in decimal?
Thank you in advance.
Kind regards
Rani Sathya M
Hello
As Ariel wrote, in the case of table you need not type "tabs" within cells to achieve a goal.
Here is an example of the last column setting
var mCols = app.activeDocument.textFrames[0].tables[0].columns[-1], mTarget = mCols.cells.everyItem().texts.everyItem().getElements(), len = mTarget.length; while (len-->0) mTarget[len].tabStops.add({ alignment: TabStopAlignment.CHARACTER_ALIGN, alignmentCharacter: ".", position: mCols.width - 10 });
Notice: it should work in a simple doc for example (1 textFrame and 1 table)
Jarek
Maybe you are looking for
-
My phone keeps requesting access to my old apple ID, how do I get rid of this constant pop-up? Also when I insert the password for this old AppleID, it says that there is no such thing as AppleID? Just this pop - up doesn't go away and interrupts my
-
problem audio iTunes 12.4
I use iTunes 12.4.3.1 with an AMD Sempron 145 2.80 GHz, 4 GB of RAM and 129 GB free on my hard drive. Whenever I play a song, the sound stutters. Reminds me of back in the day when I want to play the music on a PC of shit and he couldn't deal with th
-
MMO to laptop computer crash caused Windows updates
Okay, I had problems with an MMO, and they said for me to install these updates of driver on Windows Update that I needed. I installed them, restarted my computer and loaded to the top of my game, after 30 minutes of play the game my laptop screen to
-
Windows 7 HP Pavilion 15-b171sd Sleekbook USB driver
Hello I have a HP Pavilion 15 b171sd Sleekbook, which is the standard windows 8 is installed. Now, I reinstalled the laptop with windows 7, but I can't find the Windows 7 driver for the USB controller on the HP site. Does anyone have an idea? Thank y
-
Windows Movie Maker-how to change the length of the duration of viewing by image
Windows Movie Maker speed Can someone help me change the duration of viewing by image for the photos I moview Maker? They are "set" 5 seconds per image and I want to speed it up a little. Thank you