Selection of the trays to print from after update to OSX Yosemite 10.10

Similar Questions

• Looking for a compatible printer AirPrint for use in the field to print from my iPad 2. Possess and have v

  Looking for a compatible printer AirPrint for use in the field to print from my iPad 2. Own and use very satisfactory wbt 460 HP with a laptop. All compatible printers AirPrint currently all-in-one and too big for travel or field use.

  Whereas several HP printers are among the 15 AirPrints currently on the market, it seems reasonable that HP could provide the upgrade that would make my 460 AirPrint compatible wbt.

  I wireless (my fi) and would like to buy the wireless card from the blue tooth, if only the upgrade of the driver was available.

  How and when HP can provide a mobile/trip AirPrint printer?

  Answer as I am a person of 70 years. Because I am and can be quickly way over my head!

  For now, we don't have an Airprint-compatible printer. Future products may include, but are not currently. Products that are compatible Airprint are designed this way, so no upgrade will take place for previous models.

• Can't get the page to print from Microsoft Visio. Also will not delete the queue.

  Can't get the page to print from Microsoft Visio. Also will not delete the queue.

  The problem arose when the USB printer to a laptop with Windows 7 on a desktop using Windows XP. The printer is a HP Deskjet D1660.

  Hunting around, I found a solution that had been proposed for someone else's problem. The detachment is shown below.

  Re: Update critical to correct a PC to printer communication problem, washer dot?

  Options

  • Mark as new
  • Bookmark
  • Subscribe
  • Subscribe to the RSS feed
  • Highlight
  • Print
  • Report inappropriate content

• How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document?

  How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document? I tried the tool 'Repair Acrobat Installation' and other problems listed on the forums, but nothing worked. In the Notepad document is the following ' % [ProductName: distill] % X937B6DD4 not found, using the mail service.» X07BB154E not found, by using the messaging service. % [Page: 1] %% % [Page: 2] % % [Page: 3] % % [Page: 4] % % [Page: 5] % X4EEBB81F not found, by using the messaging service. %% [Error: invalidfont;] OffendingCommand: show; ErrorInfo: CharOffsets ss %% [Flushing: rest of work (end of file) will be ignored] %% %% [warning: PostScript error.] No PDF file produced. ] %%."

  The log file indicates that the Distiller cannot find fonts and besides, fonts with very weird names. (These names can often appear when printing from an application, WPF such as Internet Explorer 9, 10 or 11.)

  My best guess is that the problem is with the options set for the PostScript of PDF from Adobe printer driver instance. Exit the application you were initially impression since. Open the Adobe PDF printer Properties . Then click the Advanced tab. Then click on the button default printing . This should produce a significant window default print Adobe PDF is already opened in the Adobe PDF settings tab. On this tab, there is a checkbox to rely on system only fonts; do not use fonts in the document. If this box is checked, uncheck it and press apply , then OK. Then go to the general tab and press the button Preferences giving the window entitled Adobe PDF printing preferences. Again once, look for the box to rely on system only fonts; do not use document fonts. If this box is checked, uncheck it and press apply , then OK. Then back in the Adobe PDF Properties dialog box main, press apply (if it is enabled), and then click OK. Re-enter the app you were original print and try to print again. Let us know if that fixes the problem.

  -Dov

  PS: Unfortunately, rely on fonts system only turned on by default, causing problems for many applications. I always recommend turning it off (i.e., unchecking it)!

• Get "Windows could not obtain the list of devices from Windows Update, please try again later"

  Trying to load the printer driver for HP DeskJet 990c on Win7 64-bit (Intel i7 - 2640M). All online sources, including HP say pilot is available by clicking on "Windows Update" in the install printer driver dialog box. In doing so, always get message "Windows could not obtain the list of devices from Windows Update, please try again later".

  Windows Update is set to "Download updates but let me choose whether to install them".
  Downloaded and extract full X 86 driver catalog (X 86 - all - 4189_1228a7cf7b1aac21346b20cb6e21db409dde9e72.cab) from the Windows Update site http://catalog.update.microsoft.com/v7/site/Home.aspxcatalog. 'Disc', stated in the dialog of the printer driver install and selected prnhp001. INF, received immediatelt message this specified folder does not compatible device driver.
  Also tried to do the same thing with the IA64 catalog (IA64-all - 4190_6e0f85bb67d0038a6406fc71b777a1906a87888c.cab), not surprisingly has the same result.
  Also tried to do the same thing with the AMD64 catalogue (AMD64-all - 4188_bacd1413e93b4a6362d9a2ca653c869f1c02f6f7.cab) and curiously that appear additional list catalog successfully. However, when choosing hp deskjet 990 c, as soon as the driver begins to install the error box appears saying "printer driver not installed, the operation may not be completed (error code 0x00000002).
  Cannot find any other relevant catalogues on the site Windows Update Catalog (which is X 64).
  Have tried to launch MicrosoftFixit.wu.RNP.85259331246416206.3.1.Run.exe, which is worth 1 point fixed, but has no effect on the problem.
  A short of ideas. How can I get my hands on 990c driver for Win7 - 64 Intel?
  Thank you.

  .. .the printer I'm trying to install is a HP DeskJet 6122.

  You should have clearly stated that in your first post.

  See this related thread in the Hardware Win7 forum-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-driver-for-hp-deskjet-6122/a70f56dd-5be1-4ad8-bba9-701a09f8392c

  more than 25-online http://answers.microsoft.com/en-us/Search/Search?SearchTerm=6122+deskjet&CurrentScope.ForumName=Windows&CurrentScope.Filter=windows_7-hardware&askingquestion=false

  Once again, good luck.

• The appliction accepts off frequently after update on Ipad3 with ISO 10 system.

  The appliction accepts off frequently after update on Ipad3 with ISO 10 system.

  Hi ayuba75781399,

  Acrobat Reader 16.09.21 is now available in the App Store.

  It should solve the frequent accidents that you have experienced.

  Please try it and let us know if it works for you.

  We apologize for the inconvenience.

• Unable to access webmail after update to osx el capitan (404 - file or directory not found)

  I can not access webmail after update to osx el capitan. I get the message "404 file or directory not found. The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable). What should do?

  Contact your webmail provider and ask the url appropriate to their webmail page. Is which provider? What url you put in the address bar?

• Select the default tray when printing from MS Word or any other application HP OfficeJet 8610

  Hello

  We have HP OfficeJet 8610 with additional tray. So, we have Tray1 and bac2. That's what I read in the specs of the printer about how we can use the bins:

  • Loaded into all of the paper trays and use paper from a tray if the other tray is empty
  • Loaded into all trays and paper of one of the bins first use
  • Be able to choose plain paper and another type of paper that you use occasionally

  My question is:

  Let's say that we have put the tray 2 as the default tray.

  In MS Word or any other application in layout, you can define special tray (say 1 tray) paper source. This means that the document should be printed on paper from the selected tray (Tray 1). But in our case, the document is always printed using paper from the default tray (tray 2).

  Could you please confirm that this is the expected behavior?

  Thank you so much, Ana.

  Hi @AnaGligorijevic,

  I understand that you want to be able to print the same document at different trays and change the setting via the Word software. This printer is not able to change the settings of the tray for different pages in the same document to multiple pages.

  To work around this problem, you can use the parameter to "print pages." "Select it print pages selected, then for other pages ' print pages" yet once and then change the parameters of the status bar of the application.

  The application, you can change the settings of the tray for 1 page or a multiple page document. But it will print all pages of the specified tray.

  Hope that makes sense. Thank you!

• folds of 7612-printer Officejet 11 x 17 Paper 3 "from the top when printing from my computer

  Name of product-Officejet 7612.  Operating system - OS X - Yosemite (10.10.1) for my desktop and OS X (10.6.8) for my laptop.  Problem when printing from a Mac machine in the Officejet 7612 on paper 11 x 17, it will always create a mountain/valley fold all the way across the top of the sheet about 3 "from the top.  The folds will be straight through.  Whether it's origami, it would be the perfect machine.

  When I print from the control panel of the printer (for example a printing of print quality, or something www.hpeprint.com like news or some other print it will print properly with no fold either.)

  It seems as if this in case of instructions from the computer to the printer to print, he gets in a hurry to get the document creating the folds, but when it comes to the machine itself, he picks up the paper gently.

  Any thoughts?

  Hi @Bodija ,

  I see that you have problems when printing on 11 x 17 size paper of Yosemite, but you can print the thin material and ePrint test page. I will definitely do my best to help you.

  When you print from the computer, you can print on letter-sized paper or are you just had the problem with the paper 11 x 17?

  Here is a document to clean the rolls of paper to see if that will help.

  A "Paper jam" error displays on the e-all-in-one printer large Format HP Officejet series 7610.

  Go to Solution 5: clean the rolls of paper.

  Using the full feature software drivers?

  Series 7610 Wide Format e-all-in-one-HP Officejet full feature software and drivers.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 7612)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If you still have problems with it is software related, try the following steps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  How the name of the printer was placed in printers and Scanners?

  If you need help, let me know.

  Have a wonderful day!
  Thank you.

• I have a work of Illustrator on that I want to put on a Web site, what format should be recorded and how do I reduce the size to fit for example one is an A2 poster, then how to copy the watermark for printing from the web is useless

  I have a work of Illustrator I want to put on a Web site, which would be registered in? also, it's A2 How can I reduce to the web so that the image is not distorted? and when it's done how do I watermark it so if someone wants to print from the web is useless? I'm a novice at this.

  Hi Alan,

  Sue moved you here...? You answered my questions for the most part.

  As Jacob and I have said so when you are in Illustrator and you have your work open, select file > save for Web...

  From there, you will see a new window opens and you can choose your type of file (png-24/jpeg) quality, you want to be saved to and size too...

  

  See how you go.

• Accumulation of ink in the printhead, producing prints from steraking

  Hello:

  We have an HP Photosmart Premium all-in-One (AIO) printer, copier, Scanner.

  We receive in stairs horizontal white streaks the bar black, shown in a report of print quality.

  We had seen in the past when necessary to clean printheads changed, etc.

  This time, removal of ink cartridges and print heads (the chariot holding the ink cartridges), I discovered a heavy accumulation of black ink (not black photo) on the print head.  There was a lot of "gunk".

  After a lot of careful cleaning and by installing a new black ink cartridge, the problem of dragging seems if go away, however, we got vertical streaks on the typescripts, located printing roller online with printing black-cartdidge

  in the print head.  After successive cleanings of the hand, long rollers (black), the problem seems to have disappeared, although I always test things.

  The report print quality looks great, no more vertical streaks.
  This required to make several of the main roller cleaning, internal long black to remove black ink has adhered.  It seems that this roller can be removed to be cleaned.  It seems that this roll is part of a motor gear set and is not easily removable.

  My comments/questions are:

  Pages 78 and 79 of the 'series of HP Photosmart Premium C309 User Guide', States the following in the article titled, "to assess the value of print quality.

  "If all the colored bars have regular white streaks, please refer to the following steps.
  If the line 11 on the diagnostic page reads PHA TTOE completed: 0, align the printer.
  If line 11 on the diagnostic page displays a different value or alignment is not need help, clean the print head. »

  When we run the report of print quality, we get the next State.  PHA TTOE completed: 1.
  Is this value of 1, good, bad...?

  I didn't see any leak of the black print cartridge.
  No idea what can be causing the accumulation of (filth) ink in the print head (the chariot holding the ink cartridges)?

  If so, what can I do to avoid this problem in the future?

  Thank you.

  DaleB

  Printers you mentioned have different textbooks available for various reasons.   One of the reasons is the LaserJet 4 m is a printer of business and the Photosmart is a consumer printer based.  Business such as the LaserJet 4 m printers are supposed to manage a high volume and because of this expectation, there a lot of replaceable parts that owners need to know how to get to maintain and replace these parts when necessary.  So the manual available for this LaserJet printer will have a more in depth break down parts of the printer and how to disassemble and reassemble the printer.  External documents and guides the user to the Photosmart will not have this information available, because it doesn't have the same capacity or replaceable parts.

• Print quality poor on the logos of the bitmap when printing from InDesign

  We have a Mac studio. One of them prints this indesign document well, the quality of bitmap images appears as it does on the screen.

  On all other Macs on the same printer, print the logos of the bitmap on the same document with a really poor quality.

  Any ideas? It drives me crazy that have checked the settings of the printer, and it seems that they match the Mac to work.

  Don't think it's a thing of driver as anything other than the bitmap to print logos and all other documents very well.

  In the print options, you should also go to the poriton of "Graphics".

  Make sure it is not set to the Proxy - make sure it is set to "Subsample Optimisied" or "All".

• How to solve printing problems after update OS Sierra

  After the OS Sierra update, some of my files can not print from my printer. The message showed "internal error - an untrapped exception was raised. Choose 'continue' to continue execution in an inconsistent state. Choose 'Crash' to terminate the application and fill out a bug with Crash Reporter report. Choose 'Crash' will result in the loss of unsaved data. "Despite having chosen the above options, there is still nothing happen on the computer.

  Is there a way to fix this?

  Install a printer driver updated - check the site of the manufacturer for compatible drivers Sierra thew.

• I can't hear the sound on I phone after update

  After update to the last version on my Iphone 5, I can barely hear when someone calls. To use, I have to select the speaker.

  Try the procedure described in this article:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

  If this does not help, follow the last step on contact the Apple Support or make an appointment at a Genius Bar in the local Apple Store.

• OfficeJet Pro 8100: Officejet Pro 8100 won't print color after update software on Mac

  I have a MacBook Air with OS X (Yosemite 10.10.3)-.

  When I connect the printer via USB, I was able to print by using the generic drivers on the machine. However, as expected, update software detected an update for HP drivers - I installed.

  And now the printer does not print in color. I checked every setting I can think, but it is still printing in black and white.

  Any help would be appreciated!

  Welcome to the @mandikayencforum!

  I have read your current position and the previous thread on how you were not and are not able to print in color from your Mac running 10.10. I saw that already test pages were color printing and would like to know if the test always pages print in color. If they do, a matter for the Mac somewhere, and I have some suggestions for you to do below. If the test pages no longer print in color, please let me know! If the printer is not printing in color when you print test pages, there is probably a problem of cartridge or printer hardware problem.

  1. follow the same steps of @Waterboy71 on your other thread here to reset the permissions system disk and repair of printing: Re: Officejet Pro 8100 refuses to print color (OS X 10.9)

  2. If you still do not have the ability to select the color printing on your Mac, try the procedure described in this post from wisgirl64: Re: won't print in color from my Mac or iPhoto for HP photosmart D110

  If you find that the color print test pages, and the Mac does not give you the options to choose color printing, I suggest getting in touch with Apple support experts to see if they can help fix the problem of the OS X.

  • Apple support communities

  If you like my answer to you today, click the thumbs up below!

  Happy Friday!