Sensitive issue of regulatory tool

Similar Questions

• How can I increase the sensitivity of the crop tool? Harvest only moves in increments of 1/3 of an inch. Try to crop the image. Thank you

  How can I increase the sensitivity of the crop tool? Harvest only moves in increments of 1/3 of an inch. Try to crop the image. Thank you

  If you drag a rectangle and who knows, you might have to snap to grid turned on:

  Acrobat 11: View > show/hide > leaders & grills > Snap to Grid

  Acrobat 9: view > snap to grid (Ctrl + SHIFT + U)

• Migration using Time Machine - case sensitive issue

  I get a message "the selected source can't be used for migration-source do not use a case-sensitive file system" when I try to migrate using a Time Machine backup.  Any ideas?

  What this comes down to say the following:

  • Your existing backups located on a volume that is NOT case sensitive. In other words, it has been partitioned as Mac OS extended (journaled).
  • The destination drive you are trying to migrate these files to is a volume that is case-sensitive. In other words, it is partitioned as Mac OS extended (case-sensitive, journaled).

  You can check this in OS x disk utility by selecting the drive and then, by selecting file > read the information.

  The image below is an example of result to do. Note the value of parameter "is case-sensitive. In this case, this volume is not case sensitive, which means that a file named Bob or bob would be the same file. It is the default setting for the Mac's internal hard drive.

  

  I think that the only option at this point is to change the volume of destination is NOT case-sensitive to proceed with the migration.

• Sensitive issue of the browser padding

  Hi guys,.

  I'm currently in the middle of design of a site and when I published and verified on the website on my phone, I noticed the background (my own image) fill managed to jump into the screen on a mobile device.

  Home

  

  Help please

  Reactive Adobe Muse CC 2015 is now online. Please install the update of CC > Apps.

  What's new: news summary

  Release notes: https://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html

  Delicate design:

  Adobe help Muse | Create responsive Web sites

  Adobe help Muse | Responsive web design in Adobe Muse

  Adobe help Muse | Migrate existing Adobe Muse Web sites to answer

  Tutorials

  To get started with Adobe Muse (replaces how to make a website with Adobe Muse (coffee of Katie)):

  - https://helpx.adobe.com/muse/how-to/create-responsive-website.html

  Create a sensitive webpage with Adobe Muse:

  - https://helpx.adobe.com/muse/how-to/responsive-web-design.html (more detailed features RWD of Muse demo)

  Thank you

  Sanjit

• Sensitive issues

  I created a small graphic (550 x 156) and hosts to animate within Adobe Edge. He'll be placed on a sensitive site, which must therefore be able to scale down. Unfortunately, it not behave like I want it. Graphic design is not filled to its parent container, and not scale under it responds to the browser window (when it is resized). I need it to be scaling down in the parent element.

  No idea what happened?

  
  

  When you paste in AdobeEdge.loadComposition...

  I think you have to add: bScaleToParent:true right on next line after height should work

• Issue of title tool

  I can't see the picture of my calendar in my title tool.  I have something to remove inadvertently clicked?

  

• PSE12 Editor issue with straightening tool Close / save

  I use a PC with Windows 8.1 and PSE12. When I pass a photo JPEG of the Organizer to the editor, use the straightening, close, the editor saves the picture as a Word document to the Organizer. It is the only tool (for example, crop, contrast, removal of stains, etc.) who does that. All other tools save the photo in the Organizer in the form of JPEG file. How can I fix this? Is it possible to recover the dozen or that I already straightened?

  The tool straighten cannot operate on a standard layer, not on the bottom, and you should get a dialog box to transform your background into a normal layer to access the tool. so if you want to save as a jpeg, your choice is either:

  'flatten layers' and use the 'Save' option

  - or use the 'save' or ' Save as ' option and specify jpeg format on the line under the name of file.

• Sensitive issues Menu

  Hello

  I use the laptop from a friend with Dreamweaver CC and have been given the task to make a site.

  I am currently working on the menu and stuck a sensitive menu in the code:

  http://gmjones.org/DW/index.html

  On the computer, when I reduce the browser with ctrl + SHIF + m in Firefox, it shrinks and sliding to the bottom of the menu. Everything is OK so far.

  When I added additional items to the menu, which makes it much more, it still seemed OK when minimized but when I came back to the normal mode of the bureau, part of the menu contents have been pushed down outside of the navigation bar. I saw that the class 'ul' was 'clearfix', so I've added temporarily a style inline = "width: 100%" in the file HTML for the entire width of the "gridContainer" can be used. This does not solve the problem version full screen "remember" its new width of the navigation bar.

  The menu is from honkiat.com.

  By choosing 'Responsive grid' design, boilerplate.css comes into play. I had comment a few lines in this css as they changed the font color for the menu items. That's where I started frustrated because my coding/development skills are very limited.

  I have attached a link to the files.

  http://gmjones.org/DW/DW.zip

  Can someone take a look to see where I am going wrong?

  Thanks in advance.

  Make these changes to your menu CSS code.

  {of NAV

  Width: 100%;

  background: #455868;

  do-size: 14px;

  do-family: ' PT without ', Arial, without serif.

  make-weight: bold;

  border-bottom: 2px solid #283744;

  }

  Nancy O.

• Issues of selection tool.

  So I worked on a project in illustrator and all of a sudden, I couldn't use the selection tool to rotate and manipulate objects more. The arrows appear even to do this kind of action. Is it possible that I accidentally turned off the tool? If so, how do I turn it back on so I can work with him as it was before?

  May have you used Cmd (Ctrl)-h, which is the toggle to show/hide the edges or Cmd (Ctrl) - SHIFT - B, which is the toggle to show/hide the rectangle encompassing?

• new issue of pencil tool

  I'm trying to continue to draw with a pencil tool, but I can't connect the separate lines that I drew. There is no sign 'less' beside the pencil symbol when I am trying to continue to draw a path. Instead I paint just a new path while the previous fade. Where can I configure this option less so I can continue draw while connection two channels?

  Valentina,

  If the parameters are good but do not work, you have corruption preferably or something similar.

  Here is a list of things to try when things are strange.

  If all goes well, it is something easy (more).

  Try the following (you may have tried / some of them already) and see if that helps you (the following is a general list of things, you can try when the question is not in a file specific; 3) and 4) specifically may be corrupted preferences):

  (1) close Illy and open again.

  (2) restart the computer (you can do that up to 3 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder http://www.bugge.com/Family-and-friends/Illy/illy.html (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible);

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) uninstall, run the vacuum cleaner tool (if you have CS3/CS4/CS5/CS6/CC), and then reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Sensitive issue

  I'm trying to update all scripts sql that were made previously by another worker. I was instructed to follow a format where I could capitalize all scripts. I have already started this process, and I realized that this could be a problem. What is the best way to test if the PB I'm running against is case-sensitive?
  
  Currently, when I try running
  
  Select * from tbluser - the following select statement returns the columns, but each column is fully developed in Oracle sql developer
  
  Select * from TBLUSER - the following select statement returns the columns, but each column is low and does not show the content of the entire column in Oracle sql developer
  
  Before we get too deep into these changes, I want to ensure that there will be no problem.
  
  Thank you

  jerry8989 wrote:
  sb92075,

  Thanks for the reply. There is no quotation marks are used to name any table, function, procedure, view, sequence, relaxation, etc...
  In this case should have no problem in me towards the upper case all scripts, correct?

  Fix. As long as you not use quotes, case-sensitive identifiers (names of table, column names, package names, etc.) is irrelevant. It won't matter if your scripts use all uppercase, lowercase, or a combination of the two.

  Justin

• Issue of Palette tools after the Photoshop CS5 version 12.0.2 update

  After Photoshop CS5 version 12.0.2 update the tool Palette is having a problem. Normally when the cursor of the mouse on the Palette of tools in Photoshop in a hover or leave a small window will appear to indicate the name of the shortcut keyboard and tool. This little window now displayed, but space is empty.

  I've uninstalled and reinstalled Photoshop CS5 and updated once again, but the problem persists. Now I wish that I should not have updated since the version of Photoshop CS5 12.0.1. Any Photoshop CS5 users have seen this bug with their product? Is it possible to downgrade Photoshop CS5 12.0.1 version?

  p.s The tool-stack window, when the tools by clicking on the mouse and the holding of a second on the tools Palette, will open and display all of the correspondents that can be selected and use.

  I use Windows XP Professional 32-bit as operating system.

  It is a known problem with the update, and Adobe is working on it.

  Please see the thread on ToolTips, also common in this forum: http://forums.adobe.com/thread/762392?tstart=0

  -Christmas

• Sensitive issues during the scaling of images

  Hi, I do not know what to do anymore. I have this newsletter to get finished before tomorrow and nothing workd.

  Initially, I had a block of text for each feature, but after numerous tests, managers do not fit properly when you go down in the resolution and I find myself with blocks of text and images scattered everywhere, tried pinning of the options, but it simply doesn't seem like Muse knows how to handle large text stacked below the other blocks.

  So, I tried option 2:

  I cut and pasted all the text blocks (some have embedded images in them) into one; deep text block. Everything works fine - except that incorporated (including the headers of PNG) images do not proportionally - adapt leaving parts of these bleeding out of rights. Even though I have them reduced at each stop, they don't seem to remember when I text in the browser.

  Please see a shot of Muse about how the layout is supposed to look like and then check the problem when I text on a site like Responsinator.com.

  Is there a solution tho this?

  Hello, I had the same problem for over a month now and the only reliable work around, I can provide for the important subject (Nelson Mandela) remain in the framework is to scale of the framework up to 320 px width and set the sensible option to zero. It's in your breakpoint 480 - so set the frame picture to the minimum display size and work your magic typography around that.

• All Option to caps and other issues general text tool

  Is there an option while CAPITALS in flash? That's the static text.

  Also you can manipulate the text size, leading, kerning using hotkeys?

  I searched online for this and found nothing.

  If you want to copy tiny text and paste into the upper case, you will need a work around: using a dynamic textfield, assign an instance name (for example, tf) and:

  TF. Text = TF. Text.toUpperCase ();

• Sensitive issue, are two lines... but more on him

  A delicate to explain...
  
  ID TransType_ amount Principal balance
  _1___CHR______-200_________________
  _1___ADJ___200___200___
  _1___PMT___-200___200_
  _2___CHR______-300_________________
  _2___ADJ___300___300___
  _2___PMT___-300___-300_
  
  
  I have several lines for each unique ID, as you can see. What I want, it's a line by ID WHERE balance = 0. So, I need to calculate the SUM of the balances for each ID, where Trans Type = CHR and Trans Type = ADJ.... and that should give me a total of 0, for accounts, I'm interested. It is a tricky one to explain, do not know if this makes sense to someone else... Any suggestion is appreciated...
  
  Oracle 8 Server... PL/SQL Developer...