Separating sound for different devices

Similar Questions

• How to send different content for different devices

  Hello

  I would like to set up my Dreamweaver CC site to send a Unity3D game (requires the browser plugin) for desktop but send a video trailer of the game for tablets and phones.  The problem is that the Unity 3D web player does not work on tablets and phones I have Adobe Muse who would do this simple enough that you can send a different content for different devices easily, but Muse does not support the unity 3D plugin.

  I explored websites Bootstrap and sensitive, but I don't think that's the answer.  I have found a lot of tips and tutorials on how to send the same content but formatted differently to different devices, but I couldn't find anything on the use of Bootstrap to send any content to different devices.  Is it possible to use for this media queries?

  I read a little, but about setting up subdomains.  Is this the way forward?  Any advice will be greatly appreciated.  Thank you.

  Zaid

  Hi Nancy, thanks for your idea, but I just found a solution so easy, that it makes me feel stupid that I can't find as soon as possible.  My site host, Business Catalyst, allows you to create your site with content for phone and tablet in different folders.  Then, you can route these files to the phone features or tablet.  It's a simple drop down menu choices.  You don't have to do subdomains or anything like that.  Wow, what a relief!

  Zaid

• Muse, y at - it code for different devices in web page?

  When designing to the muse, can you build desktop, Tablet and phone all together with a single Web site? Check where those who have phones going on the site of phone and people with tablets go on the site of the tablet. Desktop users go to the desktop. If this is possible is there any code I must put in my web pages for visitors to go also have different devices? If so please tell me where I can find it. Thank you!

  Yes, you can build desktop, Tablet and phone layouts for a Web site and a Muse of the project and host the Adobe website of accommodation through Business Catalyst or to a third party Web host provider. The logic of the site detects the browser and the device being used by the visitor and redirects automatically to load the appropriate tablet, by phone, or office layout. There are tutorials in-depth on the construction of a mobile site in Muse - http://www.adobekb.com/creating_mobile_layouts_pt01.html

  Thank you

  Vinayak

• Grid of fluid CC how to resize tags h for different screen sizes

  Hello

  I'm new to CC. I tried to create a header or a sensitive banner as follows: a logo image Center spot left, name and address, telephone number (more large fonts/bold) positioned more low rt. How to get the text to resize with responses? Can I use the properties panel to change the sizes of tag h for different devices or what I write and a link to the css file? I don't know how to proceed for several sizes of device without having to edit the fluid.css file created by DW. I know that sounds really simple for most. I hope if I get a basic understanding of the concepts that I'll be able to expand them.

  Thanks again,

  Andrea

  In my view, it is better to create a separate external stylesheet for content.  Do not change the files fluidGrid.css or boilerplate.css.

  In your content.css, use media queries to target different devices like this:

  / Special rules for mobile phones. */

  @media only screen and (max-width: 481px) {}

  Body {make-size: 75 %}}

  }

  / Special rules for tablets * /.

  @media only screen and (min-width: 482px) {}

  Body {size are: 100 %}}

  }

  / * Special rules that apply to workstations * /.

  @media only screen and (min-width: 1024px) {}

  Body {make-size: 135 %}}

  }

  Nancy O.

• How to make a URL shortcut for Blackberry device homescreen for delivery

  Hi, I did some research and it seems confused. So I thought I would ask here.

  As we know to Blackberry 6.0, there is possibility to save a URL as a shortcut to the home screen.  The URL will be different for each device, so it could be sent to the user via email and they might click on it and open it in the browser and save on the home screen.

  However my question is how to do this automatically. Could press us the shortcut (different URL for difference appliances) through the BES Server? Is there another way if there is no BES Server?

  By running this c# application: http://supportforums.blackberry.com/t5/BlackBerry-Push-Development/Sample-code-A-simple-C-push-appli..., I am capable of pushing the a url shortcut to both Blackberry 6.0 and 5.0 simulators. This would allow us to push different URLS for different devices.

• How to ensure the compatibility of Application on different devices like the curve and the storm. ?

  Hello

  Currently I am working on an application and

  What we expect is that "Application will work in the curve and storm Blackberry secruit phone devices.".

  How I ensure this. or what are the requirements.

  I'll have to do different things for different devices. ?

  If some has a link to information that can explain the difference on various devices, please give me. Please, I beg you.

  Please help me in this regard.

  Thank you.

  Development of applications of BB is compatible before, then you might reference the version of operating system that you want to support, same generation will be used on other devices.

• Apps for various devices

  Can I develop applications for different devices with a unique edition of DPS or iPad just?

  IPad just.

  Neil

• How to choose different sounds for each contact

  It is possible to select the notification sound for each contact email name?

  You can set different sounds for ringtone and messages for each contact independently of the contacts application change a contact and then set the tone that you want under the header of message or ring.

  For email, you can set a single sound of the sounds settings section. It is not possible to set different sounds for notifications by e-mail.

• Is it possible to play different sounds for the emails and instant messages?

  Hello

  I was wondering if it was possible to play different sounds for the emails and instant messages. I use Thunderbird quite often with emails and instant messages imported from Gtalk.

  I think it would be very convenient to be able to distinguish the two sounds, because they do not involve the same things.

  Thank you very much.

  Olivier Hubert.

  There are only six modules of cat, three of them are on notifications. Choose the one you think will do the job for you. https://addons.Mozilla.org/en-us/Thunderbird/Extensions/chat/?sort=popular

• How to fix a sound problem - reading devices no. for the Device Manager on WinXP SP3?

  (1) I can't to Device Manager by following the guide for help on my system.  The steps do not match what is actually showing me my Windows and I can not here the only way I can get to it is to use a link on the help page directly.  Even when I do that, the steps in the help guide still do not match what I see on MY screen.  Is this perhaps an update of this Guide to match my system?

  (2) I need Device Manager to find out what happened on my Audio device.  I have no sound from my speakers.  It happened all of a sudden when my wife was using the computer.  I don't know what she can do both.

  Start/Settings/Control Panel / sounds and Audio Devices Properties shows "No. Audio Device", hence "Volume of the device" is gray.  Audio tab displays 'No peripheral to read '.

  The fastest way to bring up the Device Manager is:
  Start-> Run-> "devmgmt.msc".
  If it detects the sound equipment, but there is a problem with a driver, you will probably see a yellow "!" appears by your audio device.

  If he was working and stopped, you can try to perform a "System Restore" to a point where it worked:

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  HTH,
  JW

• With the help of two different devices for VDR to save the same virtual machines

  Hello

  I have VDR backup right now most of my virtual machines. I'm experimenting with some recovery scenarios disaster using VDR. I want to set up a new device, backup virtual machines themselves, but with a destination off. My question is, it would cause problems to have two different devices, backup the same virtual machines?

  I'm asking this is because I was looking at the notes of recent VMworld session on VDR and he says, regarding a troubleshooting scenario in which you must create a new device in addition to your current device, both devices back up the same virtual machines do not.

  If it is dangerous to do so because of the likelihood that two devices can save the same virtual machines at the same time, I could schedule the backup windows at different times to avoid this problem.

  Anyone have any ideas?

  I create a second local camera vDR and vDR distance and test it against a test VM. The vDR devices will have their own CBT files for each virtual computer, so they should be able to work together, but I would like to go through tests to see how they work well on the WAN. Make sure that you can transfer enough data to host daily data change.

• Separate cod file, necessary tool for different versions of the signature BONE?

  Hi all

  I installed the blackberry JDE 1.3.0 eclipse plugin that contains the default value
  package inside plugins, now using the url net.RIM.ejde.componentpack6.0.0_6.0.0.30
  http://www.BlackBerry.com/go/eclipseupdate/3.6/Java download packages of components for 5.0 etc.. After that the signing tool will be installed with this eclipse.

  My question is if my application will be used for all versions of the OS, so what do I do?

  1 should I I generate a single file of cod for 4.x or it should be necessary to generate a separate file of cod to 4.5.0, 4.6.0 4.7.0

  2 If am will have to sign the cod of the file then I need to install the tool to separate signature for each operating system? or a unique signature tool installed in eclipse itself is enough to sign all the cod files that are generated in the different versions of the OS?

  can any please help me understand these things

  Thanks in advance,

  Kitty

  This signature tool is the same for all levels of the operating system. I usually use the tool last signature, even for the 4.2 signing apps.

  Compiled cod are compatible forward but not backward.  So, if you compile using OS 4.5 it can work in devices running OS 4.5 and above.  However if you compile in OS 6.0, then it is not supported on devices running something more than that.

  You will find that you might want to use the facilities available in newer versions on the new phones, so you will need to compile separately in this case.  There are a variety of options to achieve this, but I would look first for the pre-processor.

  There is a small problem in OS 4.7, so if I develop for OS 4.5 - OS 6.0 and the code will be the same for all devices, I usually provide two builds, one for pre OS 4.7 and the other to post that.

• Deployment on different device versions

  I would like to add a feature that requires ApplicationIndicator. So far, I have been programming for the 4.2.1 API and need for backward compatibility to this version.  ApplicationIndicator was not introduced before 4.6.0.  I would rather not confront users with the choice of the installation of two buildings separated according to their version of the OS. So, ideally, I would be able to create and deploy my application in such a way that it only tries to access the ApplicationIndicator if it is running on 4.6.0 or higher.

  After reading "how to-develop applications for BlackBerry Device Software versions and models of BlackBerry smartphone" (http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800783/How_To _...), I'm still a little confused about my options.

  The section "Using libraries to support different implementations", seems to be maybe a solution. Is it? Otherwise said, it saves you from the obligation to offer multiple versions of your application, or it's simply a way to reuse the code in an organized way? Article provides many examples of code, a lot of details, like how to implement compile paths and "References of project" - what are doing by the way?-are absent.  Also, what is the end result of that look of the approach regarding files jad and cod for the deployment?

  Thanks in advance,

  Neil

  Yes. The BB-browser user-agent header contains the device model and the level of the BONE.

• I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. Can anyone help?

  I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. I now want to import photos from my iPhone, but nothing works. Can someone, please?

  MacBook Air, OS X El Capitan (10.11.1)

  Honestly, this entire thread is a repost of this , I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. Can anyone help?

  Still no answer...

  Have you tried the following:

  • Launch Photos manually once you connect your iPhone to the Mac.
  • Enter the ⌥⌘S tomato (command-option-S) key combination the sidebar visible.
  • Click on the camera in the sidebar when it appears.

  Your iPhone shows in iTunes or in the Image Capture?

  If iPhone doesn't appear at all, make sure it is properly loaded and unlocked, disconnecting, take a new photo, then reconnect it.

  • Start iTunes and confirm that you agree with the mac, the prompt on the iPhone.
  • Try a different USB port.
  • Try to force reboot the iPhone.

• Do you have an iCloud account or an account for each device purchased iCloud?

  I am trying to understand my situation to iCloud.  I have an iPhone 6s +, an iPad 2 Air and a new Mac.  I would expect to have an iCloud account with 5 GB of free storage for each of these three devices for a total of 15 GB of free storage space, or make only an account with 5 GB of free storage iCloud?

  Can someone tell me the exact answer?

  Thank you!

  Al

  If they use all the same ID, then 5 GB. If you use a different iCloud for each device ID, 5 GB each.