Sequence Labview to use as a virtualized bubble. is this possible?

Similar Questions

• I want a NEW computer, but I want Windows XP on it. I don't like about adding new fangled to it. I just want to use my OLD stuff. Is this possible?

  I want a NEW computer, but I want Windows XP on it.  I don't like about adding new fangled to it.  I just want to use my OLD stuff.  Is this possible?

  Hello

  If you are considering buying new PCs, you can go ahead and buy Windows 7 Professional, Ultimate or enterprise. These editions of Windows 7 supports Windows XP Mode, where you can use all programs Windows XP. You can also use the Windows compatibility mode to run Windows XP programs in Windows 7. For more information, see:

  Buy Windows 7: main questions

  http://Windows.Microsoft.com/en-us/Windows/shop/buying-Windows-7-top-questions

• Butterfly e/s on a virtual machine - is this possible?

  Hello

  vSphere is perfectly capable to limit the movement of CPU, memory and network, but I can't find any options / documentation on how to limit a VM disk IO. We use NFS as the back-end storage, so I can't set up actions. In addition, configuration of actions is also not exactly what I want; I want to be able to limit a VM for example to have a maximum of 500 per second I/o operations, not more.

  I'm asking this is because we have many virtual machines on some data stores NFS; There are a few virtual machines that generate so much IO other VMS are delays etc.

  Is it possible somehow? Perhaps by distorting the vSCSI adapter?

  Thank you

  Niels

  Hello and welcome to the forums.

  For the moment, it is impossible to Accelerator IOPS / s on the drive the way you describe.  No doubt ask the obvious here, but have you identified the source of the IO in virtual machines to ensure that he cannot be stopped?  AV scans, defrags, bulk copies, etc. could be taken into account.

  Good luck!

• Dynamic query using no PL/SQL. Is this Possible?

  Hello world
  
  According can the innery query result, we have a different external query I want to know if it is possible with the PL/SQL.
  
  Example:
  
  It's my inner query:
  
  with q1 as
  (select
  cases where x > 500 then 0
  1 other
  end value
  Of
  Table 1)
  
  This is where I stopped, I want to just run either of these queries according to the value.
  I know that I can do using PL/SQL, but I want to know if we can do it with pure SQL
  
  Something like that to happen:
  What value = 0: run this query: select * from table2
  What value = 1: run this query: select * from table2, table3 join using (col1)
  
  Thank you.
  
  VK

  Sure. A bit far from updated him->

  satyaki>
  satyaki>
  satyaki>select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
  PL/SQL Release 10.2.0.3.0 - Production
  CORE    10.2.0.3.0      Production
  TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
  NLSRTL Version 10.2.0.3.0 - Production
  
  Elapsed: 00:00:01.82
  satyaki>
  satyaki>
  satyaki>select k.deptno,
    2         k.empno,
    3         k.ename,
    4         k.job,
    5         k.mgr,
    6         k.hiredate,
    7         k.sal,
    8         k.comm,
    9         null dname,
   10         null loc
   11  from emp k
   12  where &eid = 0
   13  union all
   14  select *
   15  from (
   16         select *
   17         from emp
   18         join dept
   19         using (deptno)
   20       )
   21  where &eid = 1;
  Enter value for eid: 0
  old  12: where &eid = 0
  new  12: where 0 = 0
  Enter value for eid: 0
  old  21: where &eid = 1
  new  21: where 0 = 1
  
      DEPTNO      EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM DNAME          LOC
  ---------- ---------- ---------- --------- ---------- --------- ---------- ---------- -------------- -------------
          10       9999 SATYAKI    SLS             7698 02-NOV-08      55000       3455
          10       7777 SOURAV     SLS                  14-SEP-08      45000       3400
          30       7521 WARD       SALESMAN        7698 22-FEB-81       1250        500
          20       7566 JONES      MANAGER         7839 02-APR-81       2975
          30       7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400
          30       7698 BLAKE      MANAGER         7839 01-MAY-81       2850
          10       7782 CLARK      MANAGER         7839 09-JUN-81       4450
          20       7788 SCOTT      ANALYST         7566 19-APR-87       3000
          10       7839 KING       PRESIDENT            17-NOV-81       7000
          30       7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0
          20       7876 ADAMS      CLERK           7788 23-MAY-87       1100
  
      DEPTNO      EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM DNAME          LOC
  ---------- ---------- ---------- --------- ---------- --------- ---------- ---------- -------------- -------------
          30       7900 JAMES      CLERK           7698 03-DEC-81        950
          20       7902 FORD       ANALYST         7566 03-DEC-81       3000
  
  13 rows selected.
  
  Elapsed: 00:00:00.32
  satyaki>/
  Enter value for eid: 1
  old  12: where &eid = 0
  new  12: where 1 = 0
  Enter value for eid: 1
  old  21: where &eid = 1
  new  21: where 1 = 1
  
      DEPTNO      EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM DNAME          LOC
  ---------- ---------- ---------- --------- ---------- --------- ---------- ---------- -------------- -------------
          10       9999 SATYAKI    SLS             7698 02-NOV-08      55000       3455 ACCOUNTING     NEW YORK
          10       7777 SOURAV     SLS                  14-SEP-08      45000       3400 ACCOUNTING     NEW YORK
          10       7782 CLARK      MANAGER         7839 09-JUN-81       4450            ACCOUNTING     NEW YORK
          10       7839 KING       PRESIDENT            17-NOV-81       7000            ACCOUNTING     NEW YORK
          20       7566 JONES      MANAGER         7839 02-APR-81       2975            RESEARCH       DALLAS
          20       7876 ADAMS      CLERK           7788 23-MAY-87       1100            RESEARCH       DALLAS
          20       7788 SCOTT      ANALYST         7566 19-APR-87       3000            RESEARCH       DALLAS
          20       7902 FORD       ANALYST         7566 03-DEC-81       3000            RESEARCH       DALLAS
          30       7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0 SALES          CHICAGO
          30       7521 WARD       SALESMAN        7698 22-FEB-81       1250        500 SALES          CHICAGO
          30       7698 BLAKE      MANAGER         7839 01-MAY-81       2850            SALES          CHICAGO
  
      DEPTNO      EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM DNAME          LOC
  ---------- ---------- ---------- --------- ---------- --------- ---------- ---------- -------------- -------------
          30       7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400 SALES          CHICAGO
          30       7900 JAMES      CLERK           7698 03-DEC-81        950            SALES          CHICAGO
  
  13 rows selected.
  
  Elapsed: 00:00:00.24
  satyaki>
  

  Kind regards.

  LOULOU.

• Automing instruments LabVIEW without using specific and coding drivers for each instrument?

  Hello

  I'm new to programming in labVIEW, but I had a few questions about its use in automation and remote controlling several instruments.

  It is an ideal software for automation of various instruments remote control/test. Assuming that I have several different companies spectrum analyzers, I understand that labVIEW drivers of instruments or special VI who would control these instruments. But if I wanted that all these spectrum analyzers to say, to display on another computer using the remote control, but I wanted to use the same program for effeciency, is it possible to do so universally for all instruments using labVIEW? Or do I have to adapt this program for each instrument to instrument drivers cause?

  If labVIEW can do that, is - anyone had good success for such scenarios in other programming languages?

  Thanks in advance for your help.

  Look for the Abstraction Layer material (that you can implement with LabVIEW, even if it's a slightly advanced topic).

  The idea of having a specific Test and be able to enforce it against different Instruments, decided at run time, is the kind of situation that LabVIEW and use of HALs was designed to facilitate.

  The concept is to 'Levels of Abstraction'.  When you create a test, you can design it for an abstract Framistan, since all the Framistans are supposed to be able to measure Vorbels in the range of 0 to 100, so you just plug a generator of Vorbel to generate Vorbels in a certain sequence of Test (linear, random, quickly, slowly, pulsatile, continuous, you decide), measure your Abstract Framistan records readings and compare with the results you expect write the results in a nice report.

  Of course, Framistat of OR uses Ethernet as the means of communication, while HP uses a serial port (depending on the model, series settings can change) and uses of the Intel one. DLL to communicate with the low-level API.  So you also need to develop, for each specific instrument, an "interface" between its API and the Framistan abstract (not everyone uses Vorbels as the input unit, for example).

  So the good news is that it can be done, the bad news is that one of the best ways of handling this type of question on the programming is to use OOP (OOP).  A number of languages (LabVIEW, C++, JAVA) support OOP, but LabVIEW might have the advantage when it comes to interact with the material.

  I you are looking for Hardware Abstraction Layer?  Add LabVIEW to the search query and you should find some nice presentations by Elijah Kerry...

  Bob Schor

• LabVIEW playback using TestComplete Drag option controls

  Hi, we are working on TestComplete and LabVIEW to test our product embeded, here it is writes TC script to read X application data and then pass the values to the controls of LabVIEW. I tried to use option drag in TestComplete for LabVIEW control to display data who read X application but could only able to read the menu outside window LabVIEW (I mean maximize, minimize and close) and its not reading or indicators controls. Below the code example, when I read control in comunicator application using drag in TC. Sys.Process ("communicator"). Window ("#32770", "entries", 1 Test). Window("static", "", 1) code example below when I read control in LabVIEW application using option slide into Sys.Process ("LabVIEW") TC (its not of controls or reading of indicators in LabVIEW window). Window ("LVDChild", "TEST AUTOMATION.vi", 3) appreciate your help to solve this problem. Best regards, K Virgil

  Thank you Dennis, now work as expected, the solution: we should use ActiveX Rich Text format control, and then connect property of indicator text node in Labview, TestComplete use objectspy to control the Rich Text format in labview, you will get the code example as below.

  Define ch0 = Sys.Process ("LabVIEW"). Window ("LVDChild", "ANALOG INPUTS - EVEN the CHAINS", 3). Window ("NIContainerClippingWindow", "", 4). WinFormsObject ("ControlAxSourcingSite")

  then to pass values to labview control use below code

  ch0 appeal. Keys ("from TC to LabVIEW values")

  Kind regards

  Virgil K

• Alarms / opinion on the use of the virtual machine JAVA Perm Gen

  Hi team,

  I need to configure alarms / Notification each time that the use of the virtual machine JAVA Perm Gen is greater than a threshold value. I don't see all the default rules / corresponding to Perm Gen registry variables.

  Could you please enlighten us in how I can achieve... ?

  A screenshot is attached for your reference.

  Kind regards

  Arun

  I tested it after the previous message which was released indicating that you have an error, the nice thing about Foglight is that it allows to see the measures that exist (as you noted the names are a bit different in this case as the example of the JVM) and it also gives you a test button to validate the expression) , don't forget to make sure that she only appliese to the things that have names like Perm if you want it calculated only for generations of perm.

  

  

  Can you please define this thread as answered.

  Thank you

  Golan

• Copy of the virtual disk for use by another virtual machine

  Hi all! How can I copy a virtual disk file to a location for future use by another virtual machine? I tried to just copy the hard, but it did not work for me - the copy is about 1 KB size and I can not add it as a hard drive on another virtual machine. Can someone help me?

  OK, so this client web vSphere that you use, in this case browse datastore doesn't show you the two files.

  Please follow the steps below

  Please go to Cluster & host inventory

  Select your ESXi host

  go to the tab 'Manage'-> settings-> Security-> Service Profile, and then click the button CHANGE

  Start the SSH service.

  If please use WinSCP to connect to your Esxi host and navigate to the folder of the virtual machine as in the screenshot to the suite, I navigated to a folder that is my VM name: Win10A

  and it has a virtual disk, if I want to take the virtual disk of this virtual machine to a different VM, I need to copy the two files that are highlighted.

  the two are to train your virtual disk.

  

  Download these two files and download them to another folder where you second VM resides, then try to tie it with this virtual machine.

• One of the disks of rhe in this virtual machine is already in use by a virtual machine or a snapshot

  Hi all.

  An apologize for my bad English.

  I have 10 VmWare installed on Linux Centos 5.

  I worked with the Windows 7 virtual machine and hang on it.

  Now when I try to run this VM, I get this message:

  "One of rhe in this virtual machine disk is already used by a virtual machine or a snapshot.

  I try to fix it in this way:

  Re: Could not open the hard file. One of the disks in this virtual machine is already in use by a virtual machine or a s...

  mkdir ./clone
  vmware-vdiskmanager -r "Windows 7 x64-000008.vmdk" -t 0 "Windows 7 x64.vmdk"  
  mkdir /backup
  mv *.* ./backup/
  cp ./backup/*vmx ./
  cp ./backup/*vmxf ./
  
  

  But after that, I got the error: "cannot change the power state of VM: can't open ' / * /Windows 7 x 64 - 000008.vmdk.»» The system cannot find the specified file.

  Please, help me to solve the problem.

  Once again apologize for my English :)
  

  
  

  
  

  
  

  
  

  I really don't see what could be causing the problem, except that there are some .lck files in the subdirectory "lock"!

  Anyway, if worry ends snapshots and the current state is what you need, you can follow these steps (which are close to what you have already done) to merge snapshots of virtual disk in and use this virtual disk to the virtual machine:

  • Close VMware Workstation
  • Create a new subdirectory and move the VM files and folders to backup purposes
  • "" since this subdirectory run: vmware-vdiskmanager-r "Windows 7 x 64 - 000008.vmdk" t 1 '... / X64.vmdk of Windows 7 '
  • Copy the .vmx file to the parent directory and edit it as follows:
    scsi0:0.fileName = "Windows 7 x 64 - 000008.vmdk" --> scsi0:0.fileName = "Windows 7 x64.vmdk"

  Now you should be able to start the virtual machine with the cloned virtual disk.

  André

• Is it possible to transfer everything to a virtual hard disk that is smaller on a virtual hard disk that is larger in VMWare Workstation, using the same virtual machine?

  Hello

  I was wondering if it is possible to transfer everything to a virtual hard disk that is smaller on a virtual hard disk that is larger in VMWare Workstation, using the same virtual machine? In the affirmative, please could someone advise me on how to do it. Also utility management and disk transfer can be used in virtual machines to do this?

  Thank you very much

  Tim Auluck

  I'm not sure what exactly you are asking. Can you please clarify!

  Basically you can resize a virtual drive or add a second virtual disk to a virtual machine and transfer/copy files. You can also resize the virtual disk using VMware Converter for example.

  André

• How to get count of vDisks in use by a virtual machine?

  Hello

  I'm poking around CB looking for a measurememt of how many virtual disks are in use by a virtual machine.  I notice that the collector of data store is set to always run (- 1).  I could get this information by counting the number from VM_FILE vmdk files?  It seems that VC datastore entities map to the entity of the hierarchy on the side of CB, or at least they do not in my instance chargeback.

  Thank you

  Bill

  Hi Bill,

  Synchronization of data store sync job up to the sight of the vCenter Server data store. Synchronization job of storage which runs every 30 minutes by default, gets the VMDK files for a virtual machine.

  CB_VM_FILE is the list of files in a virtual machine. Table CB_VM_FILE_INFO gives details of each file with timestamps. You can use these tables to get the list of files used by a virtual machine at any given time.

  Kind regards

  Agnes

• Report to the size of the list of snapshots that are used by a virtual machine

  I'm looking for to add to my report to the size of all the snapshots that are currently used by each virtual machine.  For example, I'm already reporting on space put into service and used space - but how much space are using snapshots?   Is there a way to get this data using powerCLI?

  Thank you!

  Get-Cluster-name NOMCLUSTER | Get - VM | Select

  Name, MemoryMB NumCpu, Description, PowerState, ProvisionedSpaceGB, UsedSpaceGB, Version, VMHost, ResourcePool,

  @{N = "HDsizeKB"; E={($_. Hard drives | Measure-Object-CapacityKB property-sum). Sum}} folder,.

  @{N = "Datastore"; E={($_ | Get - Datastore). Name}},@{N="#snapshots '; E={($_ | Get - Snapshot). County}},

  @{N = 'Name of the OS'; E={$_. Guest.OSFullName}} | Export-Csv "C:\report.csv" - NoTypeInformation

  The cmdlet Get-SNapshot in PowerCLI 4.1 returns an incorrect value. See the size snapshot by Dimitar and Vitali.

  And they display a script, called getsnapshotsize - 1.ps1 that returns the correct value.

  You can use this script to your script as follows:

  (1) download the script and save it in the directory where your other scripts

  (2) call the script of the post in your script and use the size of return value

  Something like that

  Get-Cluster -Name clustername | Get-VM | select Name,MemoryMB,NumCpu,Description,PowerState,ProvisionedSpaceGB,
       UsedSpaceGB,Version,VMHost,ResourcePool,
       @{N="HDsizeKB";E={($_.Harddisks | Measure-Object -Property CapacityKB -Sum).Sum}},Folder,
       @{N="Datastore";E={($_ | Get-Datastore).Name}},@{N="#Snapshots";E={($_ | Get-Snapshot).Count}},
       @{N="OS Name";E={$_.Guest.OSFullName}},
       @{N="Snapshot size MB";E={(.\getsnapshotsize-1.ps1 $_ | Measure-Object -Property SizeMB -Sum).Sum}}     |`
       Export-Csv "C:\report.csv" -NoTypeInformation -UseCulture
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• New virtual file server using an existing virtual disk

  Hello world

  Recently, I update our hosts ESX3.02 3 vSphere4. Everything went well

  I am now trying to build new Server 2008 R2 64-bit virtual machines. I just finished the print server and am now looking at the level of the file server.

  I created the virtual machine and configured the latter as I want with a boot partition and the C drive with the installed operating system... The next step is to sort the data side, i.e. the readers of corporate network. Rather than create and assign the new virtual disks to the new server and a data copy server current to the new, I think a much more simple and less time would be to point to my new file server on the virtual disks of current servers, then assign drive letters in Windows Server.

  I suspect that it is not possible to have two servers sharing the discs at the same time, but this isn't a problem that, off hours, I close the current, start a new, point to the current virtual disks, assign letters D and E test and then delete the old file server.

  Is this possible and if so what are the implications re file sharing, permissions etc.? The current folder and the file ACL to stay?

  Any info would be greatly appreciated.

  Thank you

  You are right. You can detach a disk from a Windows VM and attach it to the other. You can "do simultaneously, unless you use some sort of cluster management system.

  About the ACL, I am not able to guarantee that they will continue, but I think that NTFS is "good enough" to do this.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• How to check what database is used by VMware Virtual Center?

  Hello

  I recently inherited a small environment and I was asked to upgrade ESX 3.5 to ESX 4.0. I'm not a person from the database, but how can I check what database is used by VMware Virtual Center? According to the guide to upgrade the MSDE database is not supported in ESX 4.0.

  I want to just make sure that we did not use this database. I looked in the ODBC Data Source Administrator. Thanks to the system DSN, I saw that the drivers for Vmware Update Manager and Vmware Virtual Center are "SQL Native Client". Also registry editor, I watched HKEY_LOCAL_MACHINE-> SOFTWARE-> VMWARE, INC.-> VMware Virtual Center-> DB. Data on 'Vmware VirtualCenter' next to '1' and '4' is set to "SQL Native Client".

  So, how can I determine if the database used is not MSDE?

  Sorry for the stupid question, but I'm not so much with the databases...

  Thank you.

  Den...

  > So, how can I determine if the database used is not MSDE?

  MSDE does not remote databases.  ODBC Open, click System DSN, click Configure.  The listed database is that it uses, and if that is the name used for virtual center, this is the database in use.

• Hi people. Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Hello

  You will be able to use the watch in Europe.

  There is no regional differences in the hardware and the software can be configured to your chosen region. The supplied USB power adapter will have to pine trees located in the United States. A travel adapter will allow you to connect it to the European outlets.

  Alternatively, you can buy an Apple USB power adapter that is located in your country of destination / country.

  For example:

  • 2-pole:
    • http://www.Apple.com/FR/shop/product/MD813ZM/A/Adaptateur-secteur-USB-5-w-Apple? FNODE = 83
  • UK 3-pin:
    • http://www.Apple.com/uk/shop/product/MGRL2B/A/Apple-5W-USB-power-adapter-folding - pins? FNODE = 83