sequence loop continuous instancing Mode Solo

When my area comes at the end of my cycle, the region begins again (as expected) but Mode Solo is instantiated, even if I continue to have Solo Mode off?

I thought that I had the trouble of sorting. But he did his new ugly reappearance!

That sounds to me like you wrote sort of automation for it. Press A to enter the mode of automation, and then search for automation Mode Solo.

Tags: Professional Applications

Similar Questions

  • Microsoft Vista update 3 of 3 do not updated and loop continuous (Home premium)

    Dell Inspiron 1525 using the update is stuck on 3/3 and a loop continuously with 0% of update to the stop and then restarts on update mode

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    See you soon.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work, try to make a Bootable ERD to do a Startup Repair:

    As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

    As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    You can make a tool to restart system, System Restore, etc. with it.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista repair disc.

    You can do a system restart tool, system, etc it restore.

    There is not a disk of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • How to automate the two images in a loop continues

    I'm a newbie to Flex and enjoy two images that I have and post them essentially in the same place one after another in a loop continues (Automation good cheap?).  I looked into different effects as bland, but I'm puzzled how to do something like this loop continues.  Most of the samples show different effects after clicking on a button or by positioning the mouse on an image... Thank you!

    http://www.Adobe.com/2006/mxml '.

    creationComplete = "init (); »

    layout = "absolute" >

    Import mx.core.UIComponent;

    [Bindable]

    private var vs: int = 0;

    private function init (): void

    {

    var: timer = new Timer (3000);

    timer.addEventListener (TimerEvent.TIMER, onTimerStart);

    Timer.Start ();

    }

    private void onTimerStart(event:TimerEvent):void

    {

    if(vs == 0)

    vs = 1;

    on the other

    vs = 0;

    }

    ]]>

    I hope this helps...
    BaBo,

  • Update blackBerry Smartphones AppWorld causes crash - loop continues/circular [bb9800 torch]

    Hello...

    Two days ago after its entry on the App World on my bb torch, he said, "there is a update available for BlackBerry App World... ' and asked if I would like to install now.  I did a bunch of times before with no problems, but I usually choose to restart later.  This time, however, I chose the option "Restart now".. .and then he is stuck in a continuous reboot loop!  Are there opportunities he's going to get out of the loop of reboot on it's own?  I tried to disconnect the battery several times... .no luck.  There may be a control key (or key combination?) that he will restore in a former limited installation or startup sequence (i.e. functional) version?

    I took in the AT & T store, and even though I have the insurance of the goods, the deductible for a replacement of torch (which they were more than happy to help with) was $ 199!  And with 4 more months on my contract for 2 years, I can't simply upgrade to a new BB... or other phone besides.

    Help or suggestions on the LOOP would be greatly appreciated!

    Thank you!

    JB

    Hmmm... the result of the Safe Mode is very clear and distinct. What you suspect is of course possible... it starts to head in Mode without failure, but the problem is too serious to allow even the Safe Mode complete, and it restarts again. Quite severe, that. In this case, this article could be useful:

    Good luck!

  • Toshiba Satellite: loop continuous Boot for windows 10 upgrade

    Hello

    I have a Toshiba Satellite and update of windows 10 a few weeks ago.

    laptop froze power so turned off the coast and now I am in a continuous boot loop.  I made a bootable USB key.  I leave the laptop to drain and was able to do ino the "toshiba configuration utility.  Fromm here, I was able to change the boot order to USB first.

    I'm Tournai on laptop and still get the message:

    "Your pc came across a problem and must restart. We restart it for you.

    Stop the code of NTFS file system.

    even with the USB from I get up for the first menu, then this message appears.  I can't even stop.

    I can't even start in safe mode.

    Help, please.

    How to stop the reboot loop?

    Thank you.

    needhelpj13

    Sorry, but these are the HP forums, not Toshiba forums.

    Many older laptop computers HP does not fare well with the upgrade of Win10, and therefore, we advise people AGAINST doing the upgrade.

    Don't know about Toshiba laptops - you should check out THEIR forums for technical advice.

    Good luck

  • What are the best settings for host when PPTX is looping continues

    With the help of Jorma is was able to realize my PPTX in continuous loop, and change the number of seconds a slide was shown see How to let a pptx presentation run on its own

    There is only one question left. What are the best settings. I find that to let him run, I need to press the sync button, but then participants may choose (inadvertently) to stop the presentation of the execution of the loop.

    What are the correct settings, so that a participant sees only the slides (no side bar etc) and the loop is running?

    Your response is much appreciated

    You should not need to press the Sync button. In the options menu Pod for the sharing, with the loaded PPT module, you'll see an option to view the presentation bar. Use that to get the part for the hosts and presenters in the room, then press the button play. The presentation will be now play in a mode loop for everyone in sync mode. You can also hide the PlayBar to keep other hosts and presenters to stop playback and Participants will never see the PlayBar or have the option to stop the presentation.

    In addition, if your door essentially on the sharing module (highlight a focus), you can use the 'P' button to start playing the presentation without revealing the PlayBar to just anyone. Adobe Connect 9 * accessibility features

  • Journal sequence difference between Instances RAC

    RDBMS Version: 11.2
    Platform: Solaris 10

    In our CAR database, we have 6 recovery logs.
    SQL> select * from v$logfile order by 1,2;   
 
    GROUP# STATUS  TYPE    MEMBER                                                                    IS_
---------- ------- ------- ----------------------------------------------------                      ---
         1         ONLINE  +ORCL_ARCH01/ORCL_ARCH/orcl_log01.dbf                                     NO
         2         ONLINE  +ORCL_ARCH01/ORCL_ARCH/orcl_log02.dbf                                     NO
         3         ONLINE  +ORCL_ARCH01/ORCL_ARCH/orcl_log03.dbf                                     NO
         4         ONLINE  +ORCL_ARCH01/ORCL_ARCH/orcl_log04.dbf                                     NO
         5         ONLINE  +ORCL_ARCH01/ORCL_ARCH/orcl_log05.dbf                                     NO
         6         ONLINE  +ORCL_ARCH01/ORCL_ARCH/orcl_log06.dbf                                     NO
 
6 rows selected.
    Logically or should I say 'in house', 3 newspapers of recovery is allocated per thread. But they all belong to a database.
    SQL> select group#,thread#,members from  v$log order by 1,2;
 
    GROUP#    THREAD#    MEMBERS
---------- ---------- ----------
         1          1          1
         2          1          1
         3          1          1
         4          2          1
         5          2          1
         6          2          1
 
6 rows selected.
 
SQL> exit;
    If all of these 6 redo log files belong to a database, then why they have different max (sequence #)?
    That is to say. The 'more old sequence online journal' in Node1 3432 watch and
    "More old newspaper online sequence ' in watch 3188 Node2 (a difference of 244)
    -- Instance1 in Node1
SQL> archive log list
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            +ORCL_ARCH01/ORCL_ARCH
Oldest online log sequence     3432 -------------------------> 
Next log sequence to archive   3434
Current log sequence           3434

-- Instance 2 in Node2
SQL> archive log list
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            +ORCL_ARCH01/ORCL_ARCH
Oldest online log sequence     3188   ------------------------> ( 3432 - 3188 = 244)             
Next log sequence to archive   3190
Current log sequence           3190

    So, it means that Node1 is busier than Node2?

    or maybe node2 declined for a few hours...

  • How to make a video to loop continues

    I'm using the version of iMovie lates and I wonder if there is a way to make my video 6 minutes be on a continuous loop? I put on a dvd, but I need to repeat. Any help would be greatly appreciated. Thank you.

    You can't embed a control loop in your movie in iMovie 10.1.1.  At least, I couldn't.  There is a "Looping" menu item in the menu display allowing you to your reading for the preview edition fine loop, but when you share the film, the loop control is not incorporated.

    However, you can share your movie and play with the Quicktime Player, where the view menu has a control loop. On the end of another thread, I tried to save the loop control in the film by renaming and economics, but I was unable to reproduce the results of the other poster.  You could try and see if you have success.

    In addition, you can make your film loop in iDVD read by right click on the link of your movie in the iDVD window and select loop in the Advanced menu.  It is the method I have used in the past.  You can actually share your movie twice in iDVD and set one with a loop and one without a loop so that the viewer has options.

    Maybe others will weigh with an additional.

  • How to run a while loop continuously without iterate loop inside the fi, a condition is met

    I enclose a VI that once the answer 28 comes the loop must stop and loop should continue an iteration. Can you show me a way for her

    You can stop the loop when a certain condition occurs: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/add_cond_to_for_loop/

    Add a register to offset for the while loop and to implement the feature as below:

  • Front Panel does not (exactly 2 even while in flat sequence loop)? LabVIEW BUG?

    Hello world

    I have two while loop with exactly the same code and a user in each loop event structure,

    They both make the same thing which is too run until IMAQ image control (one line) click on a recording.

    I used a flat sequence to manage the order of execution.

    The problem is when I use only one single loop (put another in a diagram to disable) the façade answer perfectly and the program does what it should, but when I activate the two loops stuck in case of timeout...

    I do not understand what is happening that I can't do any activity of façade that would be registered, enclosed is a copy of the VI (you need NIVision run the vi).

    Any idea? Is this a bug or did I do something wrong?

    Thank you very much

    Best regards

    This isn't a bug, but the expected behavior. You cannot sequence structures event like this, they both need to be ready to react. Use a single event structure and a state machine architecture. You have about 4 copies of basically the same code of event management. Try to combine everything in one!

    What happens in your case?

    Answer: The two structures event will begin immediately queues of events, but the second event structure cannot respond to them because it is inaccessible due to data flow. In addition, the second structure of the event is set to "lock the front panel until the end of the event. Given that the event cannot end as explained above, the façade is locked up forever.

  • Windows Vista Home Premium 64-bit loop continues!

    After spending 3 days reinstalling Vista and all of my programs after that my PC has crashed, Windows updates began and continues to stop, restart, stop, restart... Etc! ("CONFIGURATION of UPDATES 3 of 3-0% COMPLETE") It does not move 0%!  I had 3 Restore Points, but it says that I do not have?  I tried to start in safe MODE, but just to get a screen of scrolling files BACK!  I tried to fix IT but it found no problem starting?  How can I enter my office and use my computer?  I am most reluctant to reinstall again after having spent so much time reloading programs!  I used my XP system to enter in my drive C 64 Vista and checked Windows Update files and found a lot of mistakes which mean nothing to me!  I tried to attach the files here, but it did not work.  Any help appreciated.

    Thank you

    Louis

    psvpilot59,
    Take a look at this article as it covers the issue you see.  Post back with the Info requested PA porter and the results of troubleshooting in this article.

    Vista update stops at stage 3 of 3

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Dell Inspiron 15R - stuck in the automatic repair loop continuous / general problems since purchase (2 weeks ago)

    Hi I bought a Dell Inspiron 15R directly from Dell 2 weeks and have had nothing but issues. The first time I turned on, I got the message "Media Audit: fail", "check the media: fail"... that sounds like a potential problem... but I thought that nothing of him, like the laptop always worked. "» Then I got the message that there is a problem with the hard drive. For the moment, I can't even connect to the laptop as it is stuck on a continuous loop on "preparing auto repair... I left for 2 hours and he keeps just loops. I have not loaded on the cell phone of any program or downloaded from any program... I literally went through the Internet a couple of times. Please can you advise what to do... it is supposed to be a new laptop? Thanks Andy

    Hi Andy,.

    My apologies for an unpleasant experience with the new laptop. Please share the exact system model as it exists several model available for Dell Inspiron 15R and operating system installed. Also, run the system diagnostics to confirm the operation of the equipment. Here are the steps:

    • Restart the system and immediately start typing on the "F12" key to enter the "Boot Menu".
    • Press the "Down arrow" to select the option 'Diagnostics '. Press the enter"" key.
    • The diagnostics begin. Please note the exact error message / code, if everything appears on the screen.

    Please answer with the information, I'll be happy to help you further.

  • Run in continuous flow mode

    Could someone explain to me exactly what it is and how I put this in the package.ini

    Continuous running means that you are not having the package locally on the hard drive of customer but located on a central location and run the application by downloading only the blocks needed to execute and run the application. Run always takes place on the local client.

    Our streaming delivery model requires only that you place the packets on a network share. Point users on the package (the simplest method would be to provide a shortcut) and users can now start using the application. You can use thinreg.exe (found in the ThinApp Utilities folder) to check in your remote packages to create an appearance of locally installed applications... We do not put anything hidden locally and that your machines are kept clean absolutes...

    There is no necessary to package.ini parameters... All the ThinApp packages can both be used in a streaming mode or be deployed locally on disk.

    More details:

    http://pubs.VMware.com/thinapp4/help/wwhelp/wwhimpl/js/html/wwhelp.htm?href=netwk_streaming.html#1005528

    http://www.VMware.com/resources/TechResources/10027

    http://www.VMware.com/files/PDF/VMware_ThinApp_Deployment_Guide.PDF

    http://blogs.VMware.com/ThinApp/2010/04/simple-thinregexe-login-script.html

  • Select from v$ archived_log shows a different sequence for standby instances

    SQL > SELECT MAX(SEQUENCE#), THREAD # V$ ARCHIVED_LOG GROUP THREAD #;

    MAX(SEQUENCE#) THREAD #.
    -------------- ----------
    1 24630
    6064 2


    On this two instances of Eve NŒUD CARS, 2 wire shows max sequence # 6064, as lower way to thread 1 sequence max.

    Is it normal to behave as only one instance of Eve is recovering?

    Thank you

    846422 wrote:
    I have this here:
    SQL > select thread #, max(sequence#) in Group v$ archived_log by thread #;

    THREAD # MAX(SEQUENCE#)
    ---------- --------------
    1 24634
    2 6069

    No load balancing configured. I will set it up.

    I hope that this difference doesn't won't happen.

    Differences has already happened, his past.
    If your environment is good enough, no problem of load on an instance, then why you must configure again.
    I compared your first post and this post, it is around an equal amount of archives generated in both cases.

    So before setting up an analysis how many users connect to each instance.
    If you say without load balancing was configured, then how 6069 archives was generated?

    As a question, is this recently migrated to RAC database? If so, there would be significant differences.

    I mean not to focus on number of archives generated one each instance, just look at how load balancing configured if you find bad specification and make the changes accordingly.

    Thank you.

  • Need of the Movie Clip to loop continues after the end of the main movie

    Kind of a noobie questions. I want my main movie to play once, but I want that some clips of films to continue after stopping everything.

    Basically I have about six video clips (on a separate calendar) falling snowflakes. I just continue their loop than any other while what remains in place.

    I think I uncheck "Loop" in the main parameters of publication, then place an action somewhere in the clip? If you could, be very specific where to place the shares (the exact structure, in scenario clip main timeline or movie, etc.)

    Thank you very much!

    I don't know what you mean when you say 'a separate calendar', but if you have movieclip objects that animate along their own calendars, the only thing you need to do to keep them in the loop is to NOT put a stop() command in their timelines.  They will automatically loop on their own, regardless of what makes a different chronology.

Maybe you are looking for