Sequences are zoomed in the program monitor

Similar Questions

• The program monitor recovering at the center when changing sequences

  I picked my level of zoom to 200% for a nested sequence and discovers the top left in the program monitor to work with the media.

  When I go to the nested sequence in the tab adjacent timeline, I also chose my 200% zoom level and the position of the monitor program sliding towards the top left.

  When I tab back to my first sequence, my monitor of the program, always set at 200%, restores the centre, and I have to drag my monitor of the program towards the top left.

  When I return to the nested sequence tab, drag the program to the top left monitor.

  Is there a way to keep my monitor to reset the program back to its central position?

  I think you're stuck to readjust on this one.

• When I drag photos to the timeline, they are non-standard in the program monitor.

  When I drag photos to the timeline, they are non-standard in the program monitor. So I spend a lot of time to readjust them to the frame. Can you guide me on a faster method? Thanks in advance. Here are pictures of the IMG

  Sabu Singh

  Thank you for your advice. The problem is resolved.

  Concerning

• The program monitor shows only half of the picture

  Hi I'm new in preview, for some reason any when I open a photo in the program monitor, it shows that half of the picture, straight cut, in the Center (see below). I used to be able to see the entire photo and add the title and text to it.

  what setting should I bring back to normal?

  

  The first thing I would look at is the Sequence of parameters - click, on the top menu and ensure that the settings are - post a screenshot please. Your program monitor looks like a size extra-large, much wider than the standard ratio 16:9 HD or 4 K.

  The setting sequence is the basis for everything in your project - if it's wrong to start, all you will be affected later.

  Once you have a correct adjustment sequence you are satisfied, still images or video clips you want to use may not be the same dimensions/dimensions you chose for your sequence (such as 1080 p which is 1920 x 1080 pixels). You may have a still picture with larger dimensions, and then it will appear cropped as you currently see as its size does not match sequencing. Think of it as the photo was too big for a picture frame.

  As Jim mentioned, you can use the effect Adobe path across the source to fit, however it can be quicker and easier to simply with the right button of the image on the timeline, and then select define framework - this will automatically go to the media in your sequence.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Format change in the program monitor

  Hello

  
  

  I don't know what happened - but somewhere over my editing that the program monitor has changed to a standing position (as I filmed with an iPhone stand). I can't find where I can change the settings back to 'normal' - if anyone can help a beginner in Premiere Pro?

  My only solution now is to start a new project and make the film...

  Louise

  

  It is the sequence settings that alter the size and shape of the program monitor. Take a look at the title sequence / sequence, the size of the pixel settings should be the same images of you, if you are on CC, you should be able to change the settings if necessary.

• Cause of multi Cam in the program monitor PPCC. Help?

  Hello

  For the last week, I've been editing Canon. MXF a five camera images shot in Multicam PremPro CC.

  Everything was fine.  I progresses and has been able to export some preview episodes.

  Late last night, so that the edition Multi Cam in the program window, half Multicam window becomes black.

  

  Multi cam is activated in the program monitor.

  The Source window can see the multiple in the sequence cams - as seen here below.

  

  And the timeline has everything enabled for Multicam as well.

  

  As I say, I've been editing this project even for more than a week now, and it suddenly stops the multicam in the program monitor.

  The footage I had finished editing is no longer will show Multi cam in the program either monitor.  And the project has the same through other computers in this studio.

  CC is a bit different than CS6.  It is the most recent update the PPCC2014.2

  I'm looking for suggestions of ideas for what to do here before we start the project more in CS6.

  I hope I won't have to go back to CS6 a second time on a Bill this year.

  Your comments are appreciated.

  Thank you for your time.

  Right,

  So here was the problem, if any of you out there people are going nuts with what appears to be a broken project.

  In the timeline above layer multicam, I was falling into the graphics. I cut and paste into.

  In order to so I highlight the layer I want to drop the graphics on.

  As shown below.

  

  Once a layer is a highlight that the layer of Multicam, the program monitor will show is more multicam.

  Remove the layer as shown highlighted below.

  

  Hope this helps someone.

  See you soon...

• The program monitor empty composite video.

  2 x 2.26 Ghz Quad Core Intel Xeon

  16 GB of DDr3 memory

  2011 mac Pro

  DeckLink Studio 4 k audio and video output running at the receiver and external controller

  NVIDIA 5770

  Graphics NVIDIA Quadro 4000 card

  The program monitor is empty. I've got audio of counting. I can get staff to record the signal, but in composite video, nothing comes through. The video and audio signals are through my card of cause on an external monitor and speakers, but the program monitor is just empty.

  I tried restarting the computer and the creation. Check the updates of drivers Cuda. 6.1.18 running

  Already old version 6.5.14 but the problem persists.

  Tried to create a new project.

  I tried different video settings for the sequence, but all behaving the same way.

  I can't video playback in my UI for the source or video monitor.

  Help, please.

  Contacted support via chat. Is that the rendering engine has been set to OpenCL rather than Cuda. To do this, go to 'file/project settings/general' at the top of this is the rendering engine of access. If it isn't on Cuda and you Cuda, then you will not have playback. Problem solved. I feel stupid, but there is the answer if someone else needs.

• Problem with static in the program monitor when images paused

  Hi all

  I'm working on a combo video / image editing. The video is 1080 p 24 p shot by my digital SLR T2i.

  The images are larger JPG (appx 5000 x 3500). I'm using a very soft pan / zoom on the images when they come into the frame, that's why I wanted to keep the larger size (so it can fall down space of 1920 x 1080 and not reveal and background black).

  In any case, when reading, everything seems OK, but when a break on an image, the program monitor displays garbage. It will show you a mash of colors, anything that looks like the original image. Back scrubber or playing back the image, but a break on this subject shows nothing. It's painful because I need to "guess" where the image for the pan / zoom effects since I can't as it is blurred.

  Looks like almost for a long time when you do not have a television station and you have white static.

  I have to add my system:

  Core i7 3770 k

  Card mother ASRock z77

  GTX570

  16 GB of RAM

  Further, this probably has to do with the size of the image. I just had an accident as well of my Nvidia driver; and found that this related thread:

  http://forums.Adobe.com/message/4259487

  Start by reducing the size of your images to not more than 2500 x 1750. It will make for an experience of editing much snappier, reduce the load on your system and allow some soft pan and zoom.

• Last image is "stuck" on the program monitor.

  When you edit a sequence, for some reason, where there are gaps in my timeline, the final image seems "stuck" on the program monitor. In fact, it is if I select any image of the clip in my sequence, and then click an empty space and black on the timeline, it shows that the framework I finally got on the program monitor.

  The only way I got around it so far was fade to black or close and reopen the sequence, and it comes back as soon as something is displayed in the program monitor.

  Any ideas?

  Thank you.

  Welcome to the forum.

  Why are there gaps in the portion of the video of your sequence? Those that can cause all sorts of questions. If you have black, where you have gaps, rather to insert pieces of video Black (created with the new icon on the bottom of the project Panel - black Video).

  Good luck and if you remove those gaps, see Ann Bens TUTORIAL.

  Hunt

• The program monitor - I'm not seeing full clip during playback

  I am worried real!  After days of my life, import video and editing-and then trying to solve my problem to see only part of the fastener back playing in the program monitor that brought me to your site.  I spent hours looking at your posts (and indeed Adobe help pages) is trying to solve this problem and clearly my sequence settings initial (I think!) were wrong.  Maybe I can come back because I really don't know how these values are set correctly.  My original question please, if I finish my editing and then export this file, will I see again that part of the clips in the final version, or will I see all of the original clip?

  Some information:

  -Windows 7

  -Premiere Pro CS4

  -Program monitor setting is 'fit '.

  -aspect ratio 16:9

  -PAL (based in the United Kingdom)

  -Camcorder Sony HD - SR12E

  -1920 x 1080i HD

  Phew, hope this is enough Info for you "kick start" me!

  Thank you.

  Best regards, Doreen.

  From the looks of it reviews, the camera probably records in 1920 x 1080, so it is likely that you need the 1080i25 not anamorphic, preset (50i) AVCHD.

• Problem with the size of the video in the program monitor.

  I just bought PPro CS4.  When I import video files that they arise and would go well in the source monitor, but in the program monitor, the video size is very small.  My computer meets all the system requirement and I installed Quicktime Player.  What could be the issue here?

  Yes, if you are in the North Ameraca, you should have source NTSC.  But in a previous post; You told us that your source clips were PAL.

  You cannot change an existing sequence seetings.  Create a new one and you will be able to set the correct preset.

• First CC - the program monitor goes black after a few minutes

  Hello

  
  I have the following problem:
  After 5-10 minutes, the program first DC monitor (2015) becomes black. The sequence and any remains intact, I can still do everything, but it does not show on the program monitor. When I restart first nothing is deleted or changed in any way that I myself.

  Technical information:
  I use Windows 8.1, 12 GB of RAM on 2 TB of free space on my hard drive and an Nvidia GeForce GTX 650.

  I would be very happy if anyone of you could help me with this problem because it's really in the way of my workflow to restart every few minutes.

  -Clara

  Thanks for all the help, but fortunately, the problem disappeared after the new update and I hope it stays like that.

• Export lack contrast compared to the program monitor

  First of all; I'm running on Windows 10 first CC 2015.1 and using a GPU Nvidia GeForce Ti GTX750. I use Dell U2412M twins IPS monitors that are calibrated using a Spyder4Pro.

  Any codec I export to it always seems to be the same discrepancy between what displays the program monitor (as well as the preview to export) and video after export. I used VLC, the native Windows! 0 Reader (film & TV), Quicktime and HTML5. I have all these images will appear less saturated and lacking in contrast. Play exported images on an other machine parts, even relatively faded image.

  I've been reading a lot of posts on this topic, seems to be a common problem, and try to find a solution that works, none of the suggestions I've read have solved the problem in my case.

  • I checked the settings in the Nvidia Control Panel, everything is configured to use the Nvidia settings. Returning to the video player settings makes it even more flat.
  • The only one who came close it is make some additional adjustments when exporting via the effects tab. However, it's something drastic workaround with the overcompensated preview.
  • It isn't just Quicktime that has this issue, it is in all areas.

  Y at - it a setting I have not spotted, either during the export process, or to set the display within the first I missed which would give me a parity between the preview that displays the monitor program and exit? This seems a little silly that the Visual tool used when the color correction and classification of images seems to be a rule in its own right...

  Below screenshot shows the same part of a few images, VLC on the left and the program within the first right monitor.

  

  Thanks in advance for any idea on this issue.

  After a little experimentation this morning, I think I can find the answer. I use some Look of Tom Antos LUTs as part of my process of dimming on my current project. Without these elements in the equation for the difference between the program monitor and images exported in VLC is almost the same makes no difference.

  It is interesting export a file from .cube since Lumetri color Panel with everything Tom Antos LUT applied and then using this file in the ranking. .cube seems to cure the problem. There must be either something wrong with the formatting of the original Tom Antos LUT where changes to the image have been applied in the program monitor but were then omitted in the rendering process. Tom Antos READ appeared in or an earlier version of the first, and there is a kind of incompatibility. Anyway, to re-record the LUT as a native first CC 2015.1 .cube file seems to fix the problem.

  I take this opportunity to thank R Neil Haugen and J. Simon for their valuable input

  I hope that don't cross is not all 'line in the sand' marking my own answer to my original question as the answer...

• First CC 2015 - the program monitor turns black under a lot of effects

  So I worked on a video rather strongly. But it looks like a first or my GPU can not handle the amount of effects and layers because the program monitor keeps going black. Only solution is to restart the program, but if I change something or you move the timeline bar thing it just goes black again. Now she even at start up sometimes and it's really hard and boring editting. After he did this export is also impossible, it will give an error.

  I use Windows 7 and my GPU as a GTX750.

  I found a similar question on the forums but couldn't find anything useful. Is this a bug in the program?

  Run the types of effects that you use on this system as described, I'm not at all surprised that you get the results that you are. When the program "suffocates" past a certain point, it becomes totally wonky like that. How each of us "think that" this should work and how it does in reality are not necessarily related. I suggest to go to the Page of the Tweaker, where they made of actual testing of the systems in operation for years with Adobe video software, and look through their equipment.

  http://ppbm7.com/index.php/tweakers-page

  Neil

• I can't get the subtitles to appear on the program monitor

  Hello

  I watched a lot of videos and used several Adobe Tutorials but I can't see my subtitles on the monitor of the program (the monitor in the upper right corner.  This is called the correct program monitor?).  I created the CC from scratch and that they are correctly placed on the timeline.

  Help, please!

  Thank you!

  the default caption closed in the project bin is a type and another type is the default caption closed in the program monitor.

  for subtitling the show, is the type of closed captioning.

  Sorry I can't be specific, if I leave things in the memory will be too confused - I'm just failing to launch the first at this time to specify exactly, but match your closed captioning (change the type of monitor to show)