Last image is "stuck" on the program monitor.

Similar Questions

• During the insert, the program monitor does not display the adjacent images

  On page 207 of the manual, it says:

  The program monitor can help you determine where to place a clip you add to a sequence. During a change of crush it, it displays the images

  in the adjacent sequence for the new clip head and tail. During a montage of the insert, it displays the adjacent images at the insertion point.

  When I drag a clip in the project Panel in a sequence, everything works as indicated in the manual. And when I drag the same clip with the program monitor, everything works still fine - but I don't see any adjacent items displayed. How to view?

  This works when you drag the movie, not the program monitor.

• Problem with static in the program monitor when images paused

  Hi all

  I'm working on a combo video / image editing. The video is 1080 p 24 p shot by my digital SLR T2i.

  The images are larger JPG (appx 5000 x 3500). I'm using a very soft pan / zoom on the images when they come into the frame, that's why I wanted to keep the larger size (so it can fall down space of 1920 x 1080 and not reveal and background black).

  In any case, when reading, everything seems OK, but when a break on an image, the program monitor displays garbage. It will show you a mash of colors, anything that looks like the original image. Back scrubber or playing back the image, but a break on this subject shows nothing. It's painful because I need to "guess" where the image for the pan / zoom effects since I can't as it is blurred.

  Looks like almost for a long time when you do not have a television station and you have white static.

  I have to add my system:

  Core i7 3770 k

  Card mother ASRock z77

  GTX570

  16 GB of RAM

  Further, this probably has to do with the size of the image. I just had an accident as well of my Nvidia driver; and found that this related thread:

  http://forums.Adobe.com/message/4259487

  Start by reducing the size of your images to not more than 2500 x 1750. It will make for an experience of editing much snappier, reduce the load on your system and allow some soft pan and zoom.

• Cause of multi Cam in the program monitor PPCC. Help?

  Hello

  For the last week, I've been editing Canon. MXF a five camera images shot in Multicam PremPro CC.

  Everything was fine.  I progresses and has been able to export some preview episodes.

  Late last night, so that the edition Multi Cam in the program window, half Multicam window becomes black.

  

  Multi cam is activated in the program monitor.

  The Source window can see the multiple in the sequence cams - as seen here below.

  

  And the timeline has everything enabled for Multicam as well.

  

  As I say, I've been editing this project even for more than a week now, and it suddenly stops the multicam in the program monitor.

  The footage I had finished editing is no longer will show Multi cam in the program either monitor.  And the project has the same through other computers in this studio.

  CC is a bit different than CS6.  It is the most recent update the PPCC2014.2

  I'm looking for suggestions of ideas for what to do here before we start the project more in CS6.

  I hope I won't have to go back to CS6 a second time on a Bill this year.

  Your comments are appreciated.

  Thank you for your time.

  Right,

  So here was the problem, if any of you out there people are going nuts with what appears to be a broken project.

  In the timeline above layer multicam, I was falling into the graphics. I cut and paste into.

  In order to so I highlight the layer I want to drop the graphics on.

  As shown below.

  

  Once a layer is a highlight that the layer of Multicam, the program monitor will show is more multicam.

  Remove the layer as shown highlighted below.

  

  Hope this helps someone.

  See you soon...

• The program monitor shows only half of the picture

  Hi I'm new in preview, for some reason any when I open a photo in the program monitor, it shows that half of the picture, straight cut, in the Center (see below). I used to be able to see the entire photo and add the title and text to it.

  what setting should I bring back to normal?

  

  The first thing I would look at is the Sequence of parameters - click, on the top menu and ensure that the settings are - post a screenshot please. Your program monitor looks like a size extra-large, much wider than the standard ratio 16:9 HD or 4 K.

  The setting sequence is the basis for everything in your project - if it's wrong to start, all you will be affected later.

  Once you have a correct adjustment sequence you are satisfied, still images or video clips you want to use may not be the same dimensions/dimensions you chose for your sequence (such as 1080 p which is 1920 x 1080 pixels). You may have a still picture with larger dimensions, and then it will appear cropped as you currently see as its size does not match sequencing. Think of it as the photo was too big for a picture frame.

  As Jim mentioned, you can use the effect Adobe path across the source to fit, however it can be quicker and easier to simply with the right button of the image on the timeline, and then select define framework - this will automatically go to the media in your sequence.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• I had the literoom last Sunday. but did not the program. When I start this program. "Please disconnect in the menu help reconnect you, and then click license of this software.

  I had the literoom last Sunday. but did not the program. When I start this program. "Please disconnect in the menu help reconnect you, and then click this software license" How can I do?

  Hello

  I see that you bought the subscription of photography and it seems it is stuck in the sign in a loop.

  Please try out the following links

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Solve the common activation Adobe Creative Cloud (login) and questions (disconnect) disabling or error messages

  Troubleshooting of Activation creative cloud (solved 99% of the questions)

• Format change in the program monitor

  Hello

  
  

  I don't know what happened - but somewhere over my editing that the program monitor has changed to a standing position (as I filmed with an iPhone stand). I can't find where I can change the settings back to 'normal' - if anyone can help a beginner in Premiere Pro?

  My only solution now is to start a new project and make the film...

  Louise

  

  It is the sequence settings that alter the size and shape of the program monitor. Take a look at the title sequence / sequence, the size of the pixel settings should be the same images of you, if you are on CC, you should be able to change the settings if necessary.

• Export lack contrast compared to the program monitor

  First of all; I'm running on Windows 10 first CC 2015.1 and using a GPU Nvidia GeForce Ti GTX750. I use Dell U2412M twins IPS monitors that are calibrated using a Spyder4Pro.

  Any codec I export to it always seems to be the same discrepancy between what displays the program monitor (as well as the preview to export) and video after export. I used VLC, the native Windows! 0 Reader (film & TV), Quicktime and HTML5. I have all these images will appear less saturated and lacking in contrast. Play exported images on an other machine parts, even relatively faded image.

  I've been reading a lot of posts on this topic, seems to be a common problem, and try to find a solution that works, none of the suggestions I've read have solved the problem in my case.

  • I checked the settings in the Nvidia Control Panel, everything is configured to use the Nvidia settings. Returning to the video player settings makes it even more flat.
  • The only one who came close it is make some additional adjustments when exporting via the effects tab. However, it's something drastic workaround with the overcompensated preview.
  • It isn't just Quicktime that has this issue, it is in all areas.

  Y at - it a setting I have not spotted, either during the export process, or to set the display within the first I missed which would give me a parity between the preview that displays the monitor program and exit? This seems a little silly that the Visual tool used when the color correction and classification of images seems to be a rule in its own right...

  Below screenshot shows the same part of a few images, VLC on the left and the program within the first right monitor.

  

  Thanks in advance for any idea on this issue.

  After a little experimentation this morning, I think I can find the answer. I use some Look of Tom Antos LUTs as part of my process of dimming on my current project. Without these elements in the equation for the difference between the program monitor and images exported in VLC is almost the same makes no difference.

  It is interesting export a file from .cube since Lumetri color Panel with everything Tom Antos LUT applied and then using this file in the ranking. .cube seems to cure the problem. There must be either something wrong with the formatting of the original Tom Antos LUT where changes to the image have been applied in the program monitor but were then omitted in the rendering process. Tom Antos READ appeared in or an earlier version of the first, and there is a kind of incompatibility. Anyway, to re-record the LUT as a native first CC 2015.1 .cube file seems to fix the problem.

  I take this opportunity to thank R Neil Haugen and J. Simon for their valuable input

  I hope that don't cross is not all 'line in the sand' marking my own answer to my original question as the answer...

• The program monitor recovering at the center when changing sequences

  I picked my level of zoom to 200% for a nested sequence and discovers the top left in the program monitor to work with the media.

  When I go to the nested sequence in the tab adjacent timeline, I also chose my 200% zoom level and the position of the monitor program sliding towards the top left.

  When I tab back to my first sequence, my monitor of the program, always set at 200%, restores the centre, and I have to drag my monitor of the program towards the top left.

  When I return to the nested sequence tab, drag the program to the top left monitor.

  Is there a way to keep my monitor to reset the program back to its central position?

  I think you're stuck to readjust on this one.

• Problems with the program monitor for 20 to 90 seconds with project started in first CC2014 using CC2015

  I'm just finishing an important project for first Pro CC2015 and it tests my patience. Whenever I do an edit simple ripple and transitions program window to view side-by-side, CC2015 PP becomes somewhat insensitive for anywhere between 20 and 90 seconds. Sometimes it does not recover at all. When I say it's a bit insensitive, I mean I can always move clips, remove clips, or manipulate the clips in any way I want on the timeline. But the program monitor just sits on that same side-by-side view. The side-by-side never displayed the images while ripple editing is performed. The source window, audio mixer and lumetri litters all stop working. But they recover before the window of the program.

  This project was launched in 2014 CC and we should never have improved while in the middle of this project, but now it's too late to go back. It does this on two PCs at work and my PC at home. I started a new project, and no problem with changes to the ripple. Although there are minor, other performance issues, more generally I'm not happy about this day with first CC 2015. I also found a CC2014 project that will not export the correct proportions using CC2015, but just, we returned to the 2014 project to continue working on it.

  Number for ripple editing, eventually everything comes back and still works, but only once so far. Only once, however, my PC completely frozen and had to be returned. I built this PC at hand and never charge anything on what I have needed for my work. This is the first time that this PC has frozen more than 3 years that I used it. Sometimes, a program crashes, but never the entire system.

  Did anyone else out there having this problem?

  MY ADVICE: Finish the projects of CC2014 on CC2014! Stick with new projects with CC2015. or just hold off on upgrading.

  Hi Lisa,

  Disable "Composite overview for Trim" in the timeline view settings and see if that helps to run.

  

  Your Advisor not to switch versions of the programs in the middle of a project is the RIGHT HAND RULE of THUMB of video editing. + 1 for your advice.

  Thank you

  Regalo

• Problems with the 'start' button and the size of the video in the program monitor

  I was on TSF phone Adobe Help for about 3 1/2 hours today.  The problem is that the video in the program monitor doesn't fit - even when I checked it to 'fit '.  I have a mac - totally up top date, and film imported from my canon 7 d, I turned to 1280 x 720.  When I created a new project with the same, the image in the program monitor is too big.  When I create a new project in 1280 X 1080 image is too small - even when I click on 'adjust '.  Also, sometimes the play button doesn't work everything simply.  Help, they managed to get rid of my twice - preferences to no help at all, "clean up" my hard drive and the problems still continue.  They then tell me in order for me to go to the second layer, I want to buy a contract.  Can someone help me! Lose my mind! Thank you.

  What's happened is that you have created a sequence with the wrong settings.  Right-click has created a sequence with the correct settings.

  Adobe-forums http://blogs.adobe.com/kevinmonahan/2013/09/11/Marking-Posts-As-correct-or-helpful-on-the-/

• Move objects in the program monitor

  Hi all

  If I'm not mistaken, you could (in CS5) to move files (images, text, etc.) around in the monitor of the program by clicking on them. It seems that this feature is missing in CS6. Can someone tell me if this is even possible? Since then, I have no idea how...

  Thanks in advance!

  If I'm not mistaken, you could (in CS5) to move files (images, text, etc.) in the right source monitor by clicking on it.

  This feature is available in the program monitor in CS5 and CS6.

  Try by double-clicking on image in the program monitor.

  Note:

  The Source monitor is located on the left,

  The program monitor is located on the right.

• The program Monitor stops the video play list

  Hello

  I lose the composite image of video playback in the program monitor and the Source monitor after a few minutes. Audio is not yet.

  While the video plays, a random video color video screens near bar overall top 10 lines of pixels from the left edge to the right edge, then the video freezes on video, but you can still listen to. After awhile, an error message appears and the first to be forced closed. "NVIDIA OpenGL driver detected a problem with the display driver and can not continue." Error code: 3'

  It happens on all projects ranging from different resolutions and sizs from 30 seconds to 40 minutes. I suspect it has something to do with this error of the video and pilots communicate do not, but something causes of creation to arrive after the clip, played some time to display. I tried a few online solutions, others have had success with, but it doesn't have a lot of solutions fully documented for Windows users.

  This put all my projects on hold. Any ideas on how to solve this problem?

  Other clues:

  able to see reading through the other display modes such as waveform, vectorscope or rc

  be able to see the video images to change if manually move the playhead to blue

  Windows Media Player plays video files very well

  Closing the first to reopen the first time very well for a few minutes

  -----

  APPLICATION SETTINGS-

  Adobe Premiere Pro CS 5.5 (5.5.2)

  "Scratch disks": using separate SATA HDD

  Player settings: default player - adobe reader

  playback settings-

  The TV format conversion: software

  play and pause resolution: 1/2

  Displays the first field

  Project example settings-

  sequence parameters: pixel square AVCHD 1080i, 1920 x 1080 16:9 30 fps offset

  Video: I-Frame only MPEG

  Codec: MPEG I-Frame

  Frame rate: 29.97

  DETAILS OF THE SYSTEM-

  OS: Windows 7 Pro 64-bit

  RAM: 12.0 GB

  Memory RAM used (Task Manager): 3.8 GB/12

  Desktop theme: classic Windows (disabled aero)

  Intel Core i7 920 2.67GHz

  NVidia Quadro FX 3800, 1 GB GDDR3, pilot: 9.18.13.697

  3D disabled, allow material dealing with disabled, software to manage color settings, 60 Hz

  Screen: Asus VG278 native 1920 x 1080, using 60 Hz

  Display driver: generic PnP monitor (there is no real drivers for this monitor from the MFG)

  Card motherboard BIOS: no integrated graphics chip

  UPDATE:

  A day later, Nvidia released a new driver updated 03/05/2013.

  I now get a success rate of 100% of the program monitor reading, even on projects that had a few preliminary questions.

  Clean the pilot installation option / default settings

  Version of the driver (from NVidia Control Panel): 320,00 (03/05/2013)

  Version of the driver (from maps Windows display properties): 9.18.13.2000 4/18/2013

  That will do it!

• The program monitor

  My program monitor only part of the image shows, is different from the source monitor and I do not see the whole picture proporply I'm editing.

  Magnification is set to the Fit; Resolution of reading is complete.

  Is there something I can do?

  Welcome to the forum.

  As David asks, more information will be useful. Please attention to provide pixel x pixel image size for your Source of the layer film (also list the PER - Pixel Aspect Ratio) and the size of the image in the sequence. There is most likely a mismatch somewhere.

  In addition, the Source monitor panel simply displays the Source of the layer footage, regardless of the sequence/project, in which it will be used. The program monitor takes into consideration this sequence and show, compared to this sequence.

  Good luck and please let us know a little more. I think that the solution to your problem will be in these responses.

  Hunt

• Sequences are zoomed in the program monitor

  CS5 using on iMac with images shot on the 5DmkII.

  The images look good in the source monitor, but it is "zoomed" the on the program monitor. It is currently in the size 'fit' so I tried to play with the % and there is no resize the frame not the zoom. It also exports zoomed images like in the program monitor. It is my first project with my CS5 upgrade and on my new mac. Therefore, the default and I have not tested with the settings to change the view. How can I get the images in the program monitor to look exactly like he was shooting/source monitor? Thank you

  It sounds like you sequence settings do not match your settings to images. I'm guessing that the dimensions of your movie in pixels are much smaller than those of your element of film - that, when you put images (clip) in the sequence, only a piece of the clamp can be demonstrated in the relatively low sequence. You can either scale the clip to fit or do a sequence that matches the element- according to what is right for you.

  I recommend that you take the time to a path through the basic training for Premiere Pro.