Sequencing of socket

Similar Questions

• How to get taken time stated in the IO in the sequence editor?

  Hi all

  Is it possible to get the indicated default time NI Semiconductor Test Operator Interface OR in the sequence editor?

  

  Are there any expression in sequence editor that can get this time taken in the operator Interface?

  How can I include this time taken in the STDF generated by the transformation in the result sequence editor?

  Thank you

  Socket's operating time is stored in the TestResultsPropertyObject. To access this object is via the MainSequenceResult parameter in the Plugin model - USE fact entrypoint. The TS. TotalTime property records the total amount of time that required to run your test code MainSequence recall. It comes to the value included in the default reports.

  The OI shows the average decision-making time of execution of the whole lot, gets it from the Manager of semiconductor modules.

  I hope this helps.

• Change the Simple user interface for 2 Sockets example

  Hi gentlemen, I'm changing the sample application "simple labview UI" taking two, but after I did probably, I just second requeteexecution displays the socket running frist requeteexecution left blank (grey). attached the picture. Relatively, the drop-down list on top of the requeteexecution box is also empty. (However, if you click the drop-down list and select right sleeve, the first requeteexecution appear right by running the sequence). Please someone check my code to see my mistakes, thank you.

  I tried to integrate this code and it works very well with a parallel sequence in the example.  Specifically, look at my implementation of 'DisplayExecution event Callback.vi.  I hope that this solves your problem.

  Pulido Technologies LLC

• Get the context of the sequence of other connectors (active) in the batch processing model

  TestStand 2014 - model updated the batch

  LV2014

  System controls an environmental Chamber and doing trials on 4 of the UUT.  Room Enviromental is the shared resource and is controlled by the synchronization of thread only lot.  A UI TempMonitor of Labview (also synchronized lot) pops up, until you reach the target temperature and soaking time is over (so you can monitor returns to the House and see the amount of time remaining.  It all works fine in the system of warnings in.

  Now, there is a new requirement to take permanently UUT s to ensure that they remain in the State during the temperature ramp and soak period.  The simple answer is to integrate this track in TempMonitor UI because it has access to all relevant data pads.  However, I would need to do an end run around traditional return since it is only run by one of the four (up to).

  My thought is that if I had access to all active sockets sequence contexts, I could ask them their index and State, follow up and write the results to réécrirait a local variable before leaving the user interface.  The only thing that prevents me from going forward, it's that I don't know how to get the engine to give me the sequence for each Active socket contexts (0-3 which may be disabled via the setting ContinueTesting false instead of disable flag, it is a product of use pass 3rd batch of party model, so the executions of people with disabilities are marked as completed when running rather than wait).

  Or, Alternatively, how inspect all executions and to determine what decision he belongs (if necessary, because my data acquisition engine runs in its own, hidden, execution).

  Thanks for any help,

  Mike Webster

  Actually, I was looking for a way to get the SequenceContext for the other active sockets that launched the TempMonitor GUI, so I could put results in the other sockets directly.

  However, I gave it, and instead I am launch the GUI TempMonitor in its own thread and have each socket to monitor the status of USE on its own with a separate VI until what the ramp / soak temperature is how the GUI will highlight Boolean StationGlobal that triggers the individual to continue.  More complicated, but also in the spirit of TestStand to things, I think.

  MKE

• Change the color of the frame of the socket in parallel Mode

  Hello, good day everyone!

  I'm runnning my sequences in parallel Mode.

  When I run a sequence, its color of frame socket continue in blue.

  

  When I finish a sequence, its color of frame socket turns green momentarily.

  

  I would like to change that color by program from my TestStand sequence. I don't know if it is possible.

  Example: If the sequence is waiting for something, the color should change to Orange.

  ---

  When I wanted to change the text that appears in the large textbox of the socket, I had to add the code to my paralleluutdlg.c, the PostParallelUUTDialogStatusMessage function.

  http://forums.NI.com/T5/NI-TestStand/parallel-model/m-p/345847/highlight/true#M10401

  I think maybe I need to add something like this once again to change the color, but I've found nothing related.

  Thanks in advance!

  Hello

  I did recently added this feature to my system. I did it by modifying the example in this article in the knowledge base of NOR. I don't know if it's the best way to handle this, but it worked fine for me. I have modified the function as shown below. You simply pass your message and the hexadecimal color you want to use.

  Hope this helps, maybe someone more knowledgeable can ring in to see if my work practice seems ok.

  _stdcall DLLEXPORT int PostParallelUUTDialogStatusMessage (int dlgHandle, int testSocketIndex, int myColor, char * statusMsg)
  
  {     Int error = 0;}
  
        ERRORINFO errorInfo.
  
  int panelId = dlgHandle;
  
        int childPanel = - 1;
  PUUT_PanelData * panelData = NULL;
  
        TestSocketData * testSocketData = NULL;
  errChk (GetPanelAttribute (panelId, ATTR_FIRST_CHILD, & childPanel));
  
        errChk (GetPanelAttribute (panelId, ATTR_CALLBACK_DATA, & panelData));
  testSocketData = & (panelData-> testSocketDataArray [testSocketIndex]);
  
  	  SetCtrlAttribute (childPanel, testSocketData-> tonalite [kTSCtrl_Bg], ATTR_FRAME_COLOR, myColor);
  SetCtrlAttribute (childPanel, testSocketData-> tonalite [kTSCtrl_TestSocketIndex], ATTR_TEXT_BGCOLOR, myColor);
  errChk (ResetTextBox (childPanel, testSocketData-> [kTSCtrl_Status] tonalite, statusMsg));
  Error:
  error return;
  
  }
  
  

• Select Switch Executive road based on Socket Index

  Hello

  I have a created in TestStand sequence that tests simultaneously up to 4 of the UUT. In order to run a current measurement, I need to be able to spend each device through the DMM. I have properly configured routes the Swith Executive, and everything works fine when I go manually by using the feature of Test Panel. What I have to do now is however, to choose which device is routed to the digital multimeter based on its test socket number.

  Yes, for the 'measurement current"test step on" 0 "shooting, I go to properties > window and simply select"Connect_UUT0"from the route of switching group.» This works great for a single test taking, but how can I dynamically switch road when I have more than one object to measure?

  I am aware of the "RunState.TestSockets.MyIndex" variable, but I can't choose a route on this basis. That is to say: in 'Routes connect', I typed "Str (Connect_UUT) + Str (RunState.TestSockets.MyIndex)" after that I saw a similar solution on this forum, but I just get an error.

  I was really appresciate help about it,

  Thank you

  Kevin

  Hey Kevin,

  You must make Str (Connect_UUT). Probably, you get the error because it attempts to interpret the Connect_UUT as a variable instead of a string. Try this instead:

  "Connect_UUT" + Str (RunState.TestSocks.MyIndex) ".

  I think that will work, but let us know if you encounter any problems more!

• Sequence file unload the runtime starts and remains in memory through executions reference

  Hello!

  I am facing a problem using a dynamic movie file loading.

  Here's how my request: I'm testing the products on two sockets of different test so I use (a measure) parallel processModel.

  When lauching a test on one or another location of test, I still have the same trial customer template (MyProcessModelClient) in which I wrote a PreUUT call as usual. In this PreUUT custom, I get the serial number of a product, and according to this number I am a sequence of test script file and saving it (TestSequence_1.seq if it's on the test Socket 1) and TestSequence_2.seq if it is on the other.

  Then, in the MainSequence of 'MyProcessModelClient', I have a single sequence call TestSequence_1/2.seq dynamically according to the socket (TestSocket.MyIndex + 1). This calling sequence is then defined with:

  • option to load: dynamically load
  • unloading option: unload after executing the step

  And here's the trouble!

  First, the code stored in my "SequenceFileUnload" of TestSequence_x sequence reminder runs when the file is loaded... (I guess this one is loaded, copied in memory and unloaded right after...)

  Then what PreUUT reading for the next product on the same sockets of test generates an error in my script code tries to save the new file TestSequence_x (error-17206: '... a file of sequence with this path is already loaded "")!

  No idea why he acts like that?

  I don't know why you see the behavior that you describe and I'm unable to reproduce with a simple example (that I have attached). A few comments/suggestions:

  1. Make sure that you call Engine.ReleaseSequenceFileEx after that you create and save the movie file in PreUUT.
  2. The unloading of movie file callback will be called when you release the sequence file after you save it in the PreUUT because you release the last reference to this file in sequence.
  3. Make sure that you set the OptimizeNonReentrantCalls false on the sequence that you call in the TestSequence_x.seq.

  -Erik

• Is there a way to change the number of Sockets of Test, the User Interface of CVI?

  I would like to have the number of sockets in an INI file, the User Interface would be read the value of the file and set the number of Sockets of Test.  I know that it is possible by adding a callback sequence, ModelOptions, to my files in sequence and by changing the setting.  How would you do it in the UI?

  You might have the user interface to read and edit the reportoptions config file as the process template (see the source code for modelsupport2.dll in \Components\Models\TestStandModels). But why do you need UI to do this? Why not simply substitute the recall of ModelOptions and he do there?

  -Doug

• How to create a sequence that generates in the form of intellectual property?

  Hello
  
  I want to create a sequence that can generate an IP numbers. as
  
  224.0.0.1
  224.0.0.2
  .
  .
  .
  224.255.255.255
  
  Is this possible?
  
  
  Thank you very much

  KinsaKaUy? wrote:

  Then, just the format of address IP (exercise left to you)

  Hint please :)

  Enter the socket interface ntoa - simple enough to reproduce in the SQL and PL/SQL.

  PS. Look in the section "+ dotted IP number +"-it should run to the top of implementation details.

• Socket Java question

  Hi all
  
  I kinda an odd question on entry and exit of socket streams when I use the following code, everything works fine.
  
  
  Soc of socket = new Socket ("123.456.789.1", 1234);
  
  + / / Send data request.
  + DataOutputStream back = new DataOutputStream (soc.getOutputStream ());
  dos.writeInt (INT);
  back. Flush();
  
  + / / Wait for response.
  ObjectInputStream ois = new ObjectInputStream (soc.getInputStream ());
  ArrayList < String > files = ois.readObject ((ArrayList < String >));
  
  
  
  
  How ever if I declare my entry and exit all feed readers, my program just crashes.
  
  
  Soc of socket = new Socket ("123.456.789.1", 1234);
  
  + / / Define flow +.
  DataOutputStream back = new DataOutputStream (soc.getOutputStream ());
  ObjectInputStream ois = new ObjectInputStream (soc.getInputStream ());
  
  + / / Send data request.
  dos.writeInt (INT);
  back. Flush();
  
  + / / Wait for response.
  ArrayList < String > files = ois.readObject ((ArrayList < String >));
  
  Someone at - it ideas why this is?
  
  Published by: 836869 on February 15, 2011 04:02

  It isn't wird. Think about the sequence of events in the light of what said EJP, which wasn't a guess. It is based on the documented behavior. Of ObjectInputStream constructor javadoc:

  A serialization stream header is read from the stream and verified. This constructor will hang until the corresponding ObjectOutputStream has written and rinse the header.

• Problem of sequence of collation for sorting on iCloud Win (Turkish sort) Contact

  I use Turkish in the names of my contacts. Turkish has the additional characters to the alphabet from A to Z.

  They are capital and small versions of gbreve (ğĞ), scedilla (Şş), o-umlaud (Oo), u-umlaud (Uu), ccedilla (Cc), capital I point (iİ) and without point-i (ıI).

  For example my name begins with capital i with a dot on top, İhsan.

  Some other examples of name are Çetin, Şamil, Umit, Omer, Bader...

  I have almost 2000 contacts in my outlook and on iCloud as synchronized as well.

  These characters have all their olaces on table Unicode.

  And there is a collation sequence Turkish governing the sort of contact names.

  In my case, I see my contacts in Microsoft Outlook (Windows) and also on the web site of iCloud.

  When I connect to www.icloud.com, I see a perfectly sorted according to collating sequence Turkish contacts list.

  But when I have the contacts list of Microsoft Outlook such as that presented by iCloud for Windows Extension, contacts are not sorted properly and starting with these special characters is listed either at the beginning or at the end.

  Problem can be comfortably attributed to iCloud extension because when I copy same 2000 + contacts in the iCloud in a native Microsoft Outlook folder contacts folder, they are sorted perfectly. Outlook can sort by the Turkish sort sequence. It is a very annoying problem that affects also search and replace too. A Z characters have a fixed position on Unicode table offset when locating the capital and reduced versions. But these extra characters do not have the same fixed offset and because of that when I'm looking for c I can't find C or vice versa.

  So sorting is OK on the website to iCloud and based on Windows native Microsoft Outlook contacts folder, but not OK in iCloud contacts file presented by iCloud extension under Windows.

  To ensure that Apple sees your comments, do not forget to post also to

  http://www.Apple.com/feedback

• the song sequence

  Hello

  Since this update for a given title, 'CD', song or 'track' selection is no longer moves in the regular sequence, i.e.track 1 to 2 to 3 and so on. The automatic progression is random, going to randomly say 1 to 3 to 5 or 1 to 7 or 9 or 8, then sometimes back to 1, even skip a track in a title to another title, then another title. In other words totally unmanageable, without the possibility to fill in a piece of music, for example a symphony or other.

  Is there a solution to this, any ideas?

  Thank you.

  Hi Roedael,

  I understand that iTunes seems to be unexpectedly scramble the order of albums when you try to play the songs on the album in order. In 12.5 iTunes the shuffle button appears at the top in the center of the iTunes window.

  
  

  
  

  • Turn shuffle or disable: Click the shuffle button.

  Shuffle is on when a grayed out box appears.

  • Shuffle albums or groupings: Choose commands > Shuffle > Albums (or groupings). iTunes plays the songs in the order in which they appear on the album or group, and then selects another album or grouping at random.

  • Shuffle the songs in an album: Click Shuffle below the album cover.

  Help - play iTunes songs
  https://help.Apple.com/iTunes/Mac/12.5/index.html?localePath=en.lproj#/itns2989

  Alternatively, you can access the settings of shuffle in the command menu > shuffle.

  Concerning

• "World Clock" sequence of cities can be changed without first remove the cities?

  In "World Clock" cities appear in the same sequence in which those who were searched.

  If I need to change the position of a particular city, for example from position 7 to position 3,

  then I delete all cities from position 3 to the end. My question is why position

  a city in the sequence cannot be changed without deleting all cities

  It may be. Tap on edit in the top left corner. Then, you will see three lines to the right of the clock. From there, tap and hold on it, and you can move your list.

• sequence of emails displayed should be the date and time, no alphabet

  The emails were posted in the order received date/time. Now, they seem to be displayed in the sequence of the name of the sender, by alphabetical order. I would go back to the old arrangement.

  Click on the top of the column to sort. Click again to reverse the sort order. Or use mode. Sort by to select other sorts. You may also prefer not threaded view in this menu.

• How can I change the sequence of displayed in Thunderbird mail accounts?

  I need to set up a laptop computer to take on the go. How can I change the sequence (list) of e-mail accounts in the vertical pane to match my office?

  Install this add-on.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/manually-sort-folders/