Serial number of the power supply in UCS - C

Similar Questions

• just bought SCAN SNAP supplied with disc of Acrobat, but only for PC, I use a MAC, the serial number of the disk, how to use and get for MAC

  just bought SCAN SNAP supplied with disc of Acrobat, but only for PC, I use a MAC, the serial number of the disk, how to use and get for MAC

  Standard Acrobat's window only; Acrobat pro for mac

• Try to connect to the power supply via the IP address

  Hello

  I am trying to connect to a power supply of Sorensen XEL60 - 1.5 P. I have its IP address and port number, but I'm stuck on an error 63, cited at the end I tried the advice in this forum and online without success, including:

  Disabling firewall

  * the ip address ping command

  * Tools > options > VI Server

  http://digital.NI.com/public.nsf/allkb/6ccced1045c479d286256a3a00655123

  Open all the ports LV wants

  Nothing improves the situation. What I will try?

  Thank you very much

  

  Error 63:

  LabVIEW: Serial Port receive buffer overflow.
  =========================
  LabVIEW: The network connection was refused by the server. For TCP/IP, make sure that the server is running and listening on the port you want to use. Firewalls can also cause a server to refuse a connection. To VI Server, make sure that you have enabled the server from VI tools > Options > VI Server.

  No reason to be a donkey to people asking for advice. I tried UKRAINE by the boards, conscientiously the profit and loss account.

  I can actually get the power supply to operate on the VISA. It needed fixed two bugs, in the case where others are interested:

  * Setting VI_ATTR-TERMCHAR_EN to VI_TRUE

  * Creation of the resource VISA under the 'manual entry of the raw socket"rather than one of the other two. This is necessary because I'm trying to communicate via a specified port.

  So I'm fine now, I just can't pass strings directly via IP and port that I thought I should. It may be a device-specific problem, but I'm always interested in other thoughts.

  Thank you

  Warren Harding

• Satellite M40-225 - compatibility of the power supply?

  Hello

  I don't know if anyone would be able to help, but I recently posted on my power supply blow. I was able to get in touch with a diet that is supposed to be compatible with my laptop. The reference number of this power supply is PA3378E-1ACA which is 15v 5A side, and one that exploded because of worn wiring part was PA3378U-1ACA.

  Would it not good for me to use it? My laptop was left uncharged for days now, really needing to work! :(

  Thanks for any help anyone!

  Sincere greetings,
  Antony

  Hello

  Original AC adapter for your device is PA3283U-2ACA 15V 5A 75W universal adapter 100-240 v .

• Satellite L350-21F NO CONNECT the power SUPPLY

  The computer tells me in Windows it is not connected to the power supply, even if it is connected. I tried with and without battery, also the power icon is not lit, and now the battery is almost empty. The computer worked for the past 6 years and now all of a sudden what happens.

  Can you help me how to find which component does not work? What are the factors despite the adapter are possible because of this problem and how can I know?

  Thank you in advance.
  Elenktik

  Hello

  I think first of all you must check if the adapter is OK.
  The Satellite L350 requires a 6.32 A AC adapter 19V

  Possible part number: PA3290E-3AC3

• SAT L500D does not have to be connected to the power supply until the reboot

  Hi all

  I have a L500D, purchased locally and I have a problem that seems to escape correction by the helpdesk of Toshiba. My laptop while operating on battery comes with messages expected that the battery has x % remaining and suggests I plug the laptop into the power supply. I connect the laptop on the adapter and the power of the taskbar icon indicates the adapter is plugged in but it also shows that it does not load (adapter also remains cold, indicating no power is being developed). Low battery messages continue until the laptop stops ultimately. On commissioning again the laptop acknowledges that she attached to the adapter sector and charges upward.

  Helpdesk from Toshiba said a new BIOS version had been released and that I should update the BIOS and would probably "fix the problem". Went to the Australian Site and there is no other choice to see downloads for this model L500D [product number], helpdesk then took me on the European site where I updated the BIOS, then spent several hours on the phone with Symantec trying to uninstall and reinstall Norton 360, which ceased its activities and could not be uninstalled leaving my laptop not protected.

  Someone at - it an idea of what is the cause and how it might be remedied? Appreciate your thoughts.

  Hello

  If you have updated the BIOS and the help of t n right?
  Hmm I think that this problem of card mother s that looks like the adapter does not work correctly because everything is ok after new reboot
  I think the laptop is under warranty and you should get in touch with a local ASP to discover exactly what s wrong

  But I think that it s motherboard related question

• Replacing the power supply on a HP Pavilion P6000

  Outputs video (DVI and VGA) were both released on my motherboard. Rather than go through the hassle of dealing with Microsoft if I had to replace the MB, I decided to install a MSI Geforce 210 graphics card and the existing PCI express slot. However, the existing power is rated at 250 watts and the new video card got a minimum rating of 300 watts. It seems to work, and I don't do any high-end graphics or game. My main uses of the PC are paying bill online, e-mail and a few online forums. Should I replace the power supply with a higher nominal? I have a Hiper Type R PSU which is estimated at 580 watts and was planning to replace it with the 250, but it looks like not her suits because it is deeper than the power installed about half an inch. The deeper power looks like it should stick on a half inch at the rear of the computer when it is against the stop before power in the case. I would like to have some advice on the use of the existing offer or be able to use my power Hiper 580.

  The HP Pavilion P6617C model, which is the number of product BT427AAR developed a standard ATX size power supply. Dimensions (as you know) are 5.9 "x 3.4" on the back and depth 5.5"in the case. The small metal latch/stop button to slide the power supply existing forwards (for removal). There really is no support.

  4 rear mounting screws fix the power supply of the Cabinet. Of concern would be the length, an added 0.7 ", as well as cables/connectors.  You can try the Hiper in the case, and if it fits, OK. Otherwise, I suggest a diet that actually matches the Rosewill 630W

• VISA devices with the same serial number and the vendor ID does not work (0xBFFF003A)

  Hi all

  I need to acquire the data of two meters of power YOKOGAWA with VISA driver (USB connection).

  They work very well if used alone, but they do not work when are used toghether. In particular, when I plug in and turn on the two of them, NOR MAX shows me the following error message:

  0XBFFF003A (VI_ERROR_INV_SETUP)

  viFindRsrc return 0xBFFF003A (cannot start the operation because the installer is not valid (because of attributes defined in an inconsistent state).)

  Please make sure that VISA is properly installed on this system.

  Possible causes of this error:
  1. more than one passport may be to attempt to claim the same resource.  You can try to disable passport to understand which Passport is the cause of the error.
  2 you have connected multiple no configured plug-and-play devices that have the same name of the resource. For example, the vendor ID and the serial number may be the same.

  In fact, according to MAX, both power meters have the same serial number and the same vendor ID; so, this seems to be the reason why they do not work together.

  Can someone help me?

  Thank you all

  
  

• Get an error "the AC power adapter type cannot be determined" lack of the power supply or laptop AC adapter/Power Supply / load disconnected

  * Original title: error when the Power AC Adapter (DA130PE1-100) is unable to connect to the DELL laptop

  Hello

  I use the operating system Windows 7 Home Premium 64 - bit with the i5-2450 M CPU @2.50 GHz. Intel processor recently passed 1 month, I noticed an error in the laptop lacks the power supply or laptop AC adapter/Power Supply / load disconnected

  Can you please let us know why the error is the filler and help us solve the problem.

  I have the DELL AC/DC adapter model number (DA130PE1-100) CN-0ju012-48661-22B-6WRV-A06

  

  Thank you

  Kalyan

  Kalyan,

  This could be hardware related.

  I suggest you to contact Dell Support and check if there is no hardware problem.

  Please update with the State.

• Replace the power supply on my m9340f

  Hello

  I own a Pavilion Elite m9340f and I need to replace the power supply (it has the original), because the power on button failure, which I did research on forums and the solution replaces the power supply (psu led always on, for example).

  But I need to know exactly what kind of food I buy (amp, voltage, PIN number, dimensions, etc.) because I need help on the specifications.

  I'm not planning to upgrade the motherboard the case, original hp. I read in another post something on the power restriction and benicia supporting more than 450 watts power supply motherboard. I find this absurd information, because components draw necessary power from the PSU without worrying if it's 350 or 700 watts. So is one of the things that I need to be confirmed if there is restriction of power.

  Thanks in advance,

  Prince of Jeronimo Ramos

  Jeronimo, welcome to the forum.

  I believe that any standard ATX PSU must be inserted into the case.  I like Corsair and OCZ.  They are excellent manufacturers.  I suggest to measure the PSU existing and comparing measures to whichever you choose.  As far as I know, there is no restriction on the power.  I did this for a long time.  More than 550W to 600W in your computer is not necessary, however.

  If your problem is solved, please click "accept as a Solution.

• I have the computer hp pavilion dv6 laptop. where the serial number of the product is written on the product?

  Can you please provide the location where the serial number of HP Pavilion dv6 is mentioned? As always, I need to enter this number every time I visit to any client. I have not found that it mentioned anywhere. Please provide.

  You can find the serial number of your laptop through one of the means.

  1. The Service Tag (bardcoded sticker) inside the battery compartment of your laptop that would have the serial number of your laptop
  2. Turn off the computer and once you turn on, keep pressing the F10 key to load into the BIOS screen, and you can locate the serial number in the main menu
  3. Power off the computer and once you turn on, keep the button pressing ESC to load the start menu. In the start menu, you need to press the F1 key to load information system
  4. Once you have access to windows, press FN + ESC key simultaneously to find a popup that displays system information from your laptop.

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

• Can I get the serial number of the iOS, IMEI/MEID, CDN and ICCID by code device when I am developing an application?

  As the title suggests, can I get the serial number of the device iOS device, IMEI/MEID, CDN and ICCID by code, someone says I can't do that, I'm very confused. Can someone show me the Apple document on this subject?

  For reasons of confidentiality, Apple doesn't want you to access specific information of any peripheral such as MAC IMEI, UDID, address, serial number, etc and has been remove support for this kind of information the SDK for awhile now.  Your application will be rejected if you try to use private methods, that's probably what they were talking about.

• How can I add my serial number of the Macbook to the profiling system?

  Hello

  The serial number of my Macbook does not appear in the system profile information "about this Mac", which is annoying.

  I do not know what is the serial number, but how do I add it to the profile system please?

  It's a 13 inch white mid-2010.

  Thank you

  Sarah

  

  Sometimes the motherboard was replaced, but when this was done the serial number of the computer was not burned in the ROM. You can not do anything because the serial number is read from the ROM in which it could be stored. If you are looking about this Mac so you will not be bored as much.

• How to change the serial number when the system board is replaced

  How can I change the serial number of the system in the bios of a D530 SSF when replacing the motherboard?

  Hello:

  I suppose that if that's all you can do with this utility, then it of all you can do.

  I do not think I said that the utility likely to modify or add the model number, nor asked the question originally.

  You will need to contact HP technical support and have a technician HP bios with any other information you need to tattoo.

  Paul