Serial port and parallel to ESXi 4

Similar Questions

• Physical serial ports are supported in ESXi?

  Physical serial ports are supported in ESXi?  I install Windows 2008 SBS on a HP Proliant ML350 G6 ESXi (version of stick USB HP) running. The server comes with a serial port on board.  I was hoping that connect an external modem and expose it to the virtual server, Windows SBS 2008 to serve as a network fax.  Is this possible? Alternatives if not supported?

  It would be a no.

  There are TCP/IP USB devices, do not know if there are similar devices for the series, but NO physical devices, sound cards, usb, parallel, series can be transmitted to a virtual machine.  That's because ESX uses vmotion, and it was designed to let the virtual machine move between machines, so allowing physical connections so would interfere with this operation.

  http://www.tacticalsoftware.com/products/dialoutez.htm

  However, who should be a solution for you.

• Reading codes ascii serial port and their trace

  Hello

  I am trying to build a VI that reads data (ascii values) of the serial port.

  I am trying to build a Phonocardiogram wireless. I have a microphone that acquires the heart sounds. These signals is amplified and sent to an A/D converter to digitize it. the digital signal are sent to a base unit. UNTV signals received by the base unit must be sent to a computer (via a serial port to display).

  I would like to build a VI to draw ascii data received through the serial port.

  I would like to draw these values so that the plot resembles an analog signal (the one I had before an A/D converter).

  Can someone give me help?

  Thanks in advance...

  HII

• Problem with the serial port and external DLL

  Hello

  I have a Platinum (innco systems CT 0500), which is connected via a USB-RS232 to PC Converter. I want to fight in LabVIEW.

  The software CD contains a DLL and a header file - I imported both in LabVIEW.

  But I am unable to get a connection via LabVIEW COM port. There is an error of the adage about function ConnectTurntable() return code 'could not open port - port address is unknown to the PC or port is used by another program.

  The demonstration of the delivered CD software works - the connection to the COM port is working with him, so there must be a mistake in my LabVIEW Code.

  Thanks in advance

  
  

• Sending data through the serial port and the mscomm control is not the same as the original data

  Please find attached the mscomSerialWrite2.vi and the resulting image.

  Try it and find that when data "FFAE" 4040 EA41 D8FF is sent,

  the received data are "FFAE" 4040 EA41 3F

  I tried other data, the result is as follows:

  sending: 4164 8163 4341 03 receive: 41 64 81 63 43 41 03 leadK
  sending: A143 B245 6AAA BBCC receive: AA BB 00 A1 B2 45 6a 43 result: NG
  sending: AAAA AAAA AAAA AAAA AAAA AAAA receive: result AA AA AA AA AA AA AA AA AA AA AA AA K
  sending: A1A1 A1A1 A1A1 A1A1 A1A1 receive: result A1 A1 A1 A1 A1 A1 A1 A1 A1 A1K
  Send: FFAE 4040 EA41 D8FF receive: FF AE 40 40 41 EA 3F result: NG
  Send: FFAE 4040 EA41 D8FF AA23 AB33 A233 AAAA A404 ABCD A2CD A22D B22C receive: FF AE 40 40 41 EA 3F 3F 3F 3F AA AA AB CD A2 CD result 3F 3F 3F: NG
  Send: FFAE 40A 2 SDAC AETS receive: result FF AE 40 A2 CC DD EE 00: NG

  Please help me solve the problem.

  

  According to Microsoft, you want something with non-printable strings as an array of bytes, not a string.  I don't know that it will make a difference in this case, but may be worth a try.

• How to create a stop button to send commands via the serial port and finish labview vi?

  I want to send two commands on my camera, the first to stop the execution and the second to get out of the remote control mode. This is done on RS232. What I want is a way to put this in my existing VI that tells the device to run. Now if I stop the program, that the devices just run the last command unless I have stop manually. How can I set up a stop button that are not sent to all orders except in such a hurry? I tried the structure of the case, but didn't know how to put a part of 'status quo' If island stops in the while loop is not pressed the button.

  
  

• A22m cannot locate correct ethernet, serial port and an unknown device drivers.

  Just picked up an old A22m and no drivers on the support site seem to want to work for it.

  I'm looking for additional identification for the laptop and the only thing I can find on the guy: 2628 - ttu

  Features of the laptop:

  1 GHz, 384 MB, 28 GB

  Windows 2000

  I appreciate all help.

  Welcome to the forum!

  After downloading the drivers, have you unpacked in the appropriate directory, for ethernet, it should be something like: C > drivers > win > Ethernet...

  It's the right driver for your computer's Ethernet:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-4V3MN7

  I hope this helps.

• Series, parallel, USB ports are available in ESXi?

  Hello

  I am currently using the ESXi 4.0

  I have read the knowledge base,

  and found the step to activate the devices USB, Serial Ports and Paraller.

  But it is still not able to work.

  Can I know what step I'm bored or something else I don't have success install?

  Please please help me on this.

  If you want to use the real serial ports - you have two options:

  (1) install a serial to IP device

  (2) not use ESX, ESXi. ESX are supported by two parallel port forwarding and VM series

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Store data from the Serial Port in the buffer and then take action?

  Hello! Everyone,

  I'm new to LabVIEW and I take assistance from various videos and stuffs available online to get started with LabVIEW.

  But I have a duty, therefore needing help.

  initially I see some of the tutorial videos and learned about the LabVIEW interface, and does a little project to communicate with the Port series (receiving and sending data).

  Happens to my task.

  My LabVIEW application will send a few State request packets on my device or control and based on the response packet that I have to display values.

  The Structure of package is as

  Header, length, Op_Code, data Checksum

  There is no terminator as newline or carriage return or anything else.

  In C language, I read the data from the Serial Port, and based on the length, I conclude that I got the full package or not, and then by recalculating the checksum value, the integrity of the package is verified and then based on that Op-Code has been sent will be decided.

  (I'm dealing with hexadecimal data)

  But how can I do this in LabVIEW.
  A tutorial or any referece will be useful for me.

  1. I suggest that you learn to use Shift Registers instead of local and global variables.  They are much more efficient (memory and execution speed) and make it much easier to read the schema.

  2. you don't need this inside the loop property node.  Is there a way to configure a Serial Port to turn off the stop character.

  3. you don't need to wait for playback VISA will limit the rate of loop if no data is coming.

  4. Once you have the length, you simply read the rest of the entire message and process it at a time.  This will make things a LOT faster.

  5. you should really do this enum a def type so that you can ensure that all your enum constants have the same values.  If you need to add a State later, simply update your enum in the same place then.

  

• Serial Port problems - carriage return and use as an executable file

  Hello

  I developed an application to send a few simple commands on the serial port and read the corresponding answers of a device that I am in communication with.  I have been using logical Port to watch the line TX of the serial port.

  By using the Visa configure Serial Port I set the stop character property allow true and used the hexadecimal value D trying to make the termination a carriage return characters.  When I sent the order, I'll send the cmd followed by Enter.  No matter if this property is set to true or the hexadecimal value is set to D for carriage return or line break is, the serial port would always send a line break.

  Then I got crafty and the string constant under normal display to hexadecimal display.  The ONLY way I could send a carriage return was manually putting 0x0D after ordering.  So my question is, why the Visa set up the Serial Port is not working correctly, and is there a better way to send a carriage return?

  My next issue is facing the construction of executable files.  I'm using LabVIEW 8.2 and wrote this program for another employee to use on his laptop computer.  I did install runtime Labview 8.2 and led to the executable that I generated.  I did-> the executable by clicking Tools build the executable.  The problem I noticed was that the executable would open and will work perfectly, but it would not send any data the serial port.  I then ran the executable on my laptop (which contains the full version of LabVIEW 8.2) and the serial port has worked well.  I guess my question is... Are there plug-ins that must be installed to use the serial port with the Labview runtime engine?  Or y at - it a step that I failed to do?

  Thank you

  Gary Still

  Not immerse in the first issue. The Knight will probably be galloping until shortly.

  For your second question, after building the executable, you must build the installer and includes support for the VISA. VISA is required for serial communication, and it does not accept American Express.

  It may be useful

  -AK2DM

• Serial port PCI and Windows 7

  What is PCI Serial Port and what will it do to my PC which has been upgraded from windows vista to windows7?

  Hi Jose,

  A serial port is a port of connection that uses the pins based connections to connect an external device such as a printer or a monitor to a computer. If you have a device that still uses serial port connections, you will need to add a PCI serial port to your PC.

  Let us know if you need help on the issue and we will be happy to help you.

• Using the Serial Port on the HP 50 g graphic calculator

  Hello world

  I have another question. I want to use the Serial Port on the HP 50 g to connect with another device. The device is called the MFJ-1214PC. What it does is to accept the text and commands through a 9-pin serial Port and converts the text in a Code Morse/RTTY sound audible. It also decodes Audible the Morse Code and RTTY radio signals and displays them as text on your computer. The program that controls the MFJ-1214PC was originally written for an IBM PC for the MS-DOS operating system. The HP 50 g graphic calculator meets the system requirements for the simplest version of the program. I was wondering if there is an MS-DOS emulator written for the HP 50 g, which would allow the HP 50 g to become the computer in this case, or if the program could be rewritten and brought to the HP 50 g. If it could be rewritten, programming language what do you think would be better suited to this type of application (if it is even possible?) or UserRPL, SystemRPL or Assembly. Don't forget that I'm a complete newbie with the HP50g and have never programmed with it yet. I'll include the manual of the MFJ-1214 PC as an attachment so that you won't have to look for him. Thank you in advance for your help!

  ~ Zekelegge ~.

  I understand (from my brief overview) out of the box-MFJ-1214PC, this offer box decoder output series computer.  The computer (50g in your case) will have the software to read message series and then convert that to an output for display.

  BartDb gave you the right answer.

  A serial cable with the correct speed level and reversing lever to manage as well as the 50G has a RS-232 signal to the outside world is the ideal solution.

  However, make sure that the output of the decoder box series package can be understood by the 50 g. aud, bits, etc.   (you have the set-top box manual, so you'll have to look that up)

  the streamsmart is not an aggregator of serial port.

  in other words, these connectors DIN of Qty 4 on the front do not accept series rs-232 input and send then to 50 G.

  I'm not an expert, streamsmart more info on these boxes is rare to find.  The probes are even more rare.

  However, I know that the 4 connectors are for the analog-to-digital conversion in the probes.  The streamsmart works as a "data logger" in which he sees the input probe, the A/D converted, then sends it to the 50G (or a computer via the USB port).

  In addition to the solution of Bart, there was another named Tiwag forum poster who created a serial cable and displayed a schematic representation of the cable.  This information can be found here:

  https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/serial$20port/comp.sys.HP48/ltcane1jSOw/uHyw2Ti03kgJ

  to see an example of programming to use the serial port of 50G, you can reference the following hpcalc GPS data collection program.

  http://www.HPCalc.org/details.php?id=7105

  It is written in userrpl so can be crossed with the reference of users advanced for the translation of the syntax.

  It seems that the main routine of concern for the comm to the gps is in the file "GPS >.

• Tecra M11 - 17V - identify the serial port on the docking station

  I have a laptop Toshiba Tecra M11 - 17V, which I often use with the docking station that accompanies it.
  There is a DB9 serial port at the back of the docking station, but I don't know what COM Port.

  I use Windows 7.

  In the device, COM9 Manager - COM22 are identified as Port BT (bluetooth). Com7 - COM8 are RIM Virtual Serial Port v2, COM17 is Prolific USB-to-Serial Comm Port and COM18 is USB-Serial CH340.

  I thought that COM17 or COM18 were the most likely candidates, but have not been able to get to answer using one of them.

  I connect a Psion 5 (Comms app) to him and have developed ports and the Psion 8bits, 19200 baud, no parity, 1 stop bit.

  Hello

  > There is a serial port DB9 on the back of the docking station, but I don't know what COM Port, it is

  I think you have misunderstood something wrong
  COM ports in Device Manager are virtual com ports
  There is no link between a serial port and a virtual com port.

  I have a question: what docking station you have exactly?

  I had an express port replicator and this device required an additional serial port driver installation.

• HP ZBook 15 G2: I can't find driver for Serial Port PCI

  After re-installation, my HP ZBook 15 G2 is missing the driver for "PCI Serial Port (COM5)".

  This unit has the following ID: VEN_8086 DEV_8C3D

  I installed all the drivers for chipset for the HP ZBook 15 G2.

  Where can I find the driver for this device?

  Hello:

  You need this driver.  If the driver will automatically install the driver for serial port, and then manually install the device by navigating to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp68428.  Make sure that the include subfolders is selected and the driver should install.  Then restart.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6978815&swItemId=ob_137806_1&swEnvOid=4059

  The hardware ID you posted is supported by this driver if you look in the mesrl configuration file.

  [Intel.NTamd64]
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_1E3D & CC_0700"
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_1CBD & CC_0700"
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_1C3D & CC_0700"
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_1DBD & CC_0700"
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_1D3D & CC_0700"
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_8C3D & CC_0700"
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_9C3D & CC_0700"
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_9CBD & CC_0700"
  % SRL_DeviceDesc % = ComPort, "PCI VEN_8086 & DEV_8D3D & CC_0700"

• serial port cRIO

  Hello

  Can someone tell me how to access the serial port of the crio 9024. I pass the data to the serial port of the controller. This transmission must be by crio serial port and not by module CSeries.

  Thank you

  Hello mimran,.

  cRIO controllers run LabVIEW Real-time.  Therefore, you perform series read/write through the range of NI-VISA in LabVIEW.  All data collected from the port, or sent to the port will have to be given "String".

  There are examples for reading installed with LabVIEW series.  These are only a few small changes to work as in real time.

  Follow these steps for an example:

  1. Launch LabVIEW.
  2. In the main menu, go to the 'Help'-> 'find examples '.
  3. In the upper left corner, click on the tab "search".
  4. Search for the term "series".
  5. Open the example called "basic series write and Read.vi.

  Kind regards