Series, parallel, USB ports are available in ESXi?

Similar Questions

• USB ports are not available

  My host is a laptop Toshiba with Ws 7. The USB ports are fully operational. However, with the players that they are not. for example, XHDD is not on the desktop "XP".

  What to do so I can make use of the USB ports?

  Hi Redoak716,

  You just need to add a USB controller to the hardware of your virtual machine configuration. Make sure VMware tools are installed and running in the comments.

  Once your virtual machine is in place and your USB drive connected to the host, attach it to the guest using the control panel of devices on the lower right part of the screen of the console. It will be detached from the host that it cannot be used by the two systems at the same time.

  It will be useful.

  Concerning

  Franck

• Physical serial ports are supported in ESXi?

  Physical serial ports are supported in ESXi?  I install Windows 2008 SBS on a HP Proliant ML350 G6 ESXi (version of stick USB HP) running. The server comes with a serial port on board.  I was hoping that connect an external modem and expose it to the virtual server, Windows SBS 2008 to serve as a network fax.  Is this possible? Alternatives if not supported?

  It would be a no.

  There are TCP/IP USB devices, do not know if there are similar devices for the series, but NO physical devices, sound cards, usb, parallel, series can be transmitted to a virtual machine.  That's because ESX uses vmotion, and it was designed to let the virtual machine move between machines, so allowing physical connections so would interfere with this operation.

  http://www.tacticalsoftware.com/products/dialoutez.htm

  However, who should be a solution for you.

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• Portege M500 cannot start when the USB ports are loaded

  We have a M500 that recently seems to be affected by start-up problems when the USB ports are loaded with things like KB and Wireless Mouse USB external adapter.

  When these ports are occupied at the start, all the usual tools seem do not load and the associated icons do not appear in the toolbar at the bottom of the screen. The machine in question XP Professional and has 2 GB of RAM. The machine software is generally updated. Machine seems to start normally when the USB ports are empty.

  Once completed a successful boot USB ports can be occupied and the machine will then seem to operate normally.

  Any thoughts?

  Thank you.

  Hello!

  In your case, I would do a BIOS update and also the chipset driver.
  The two you can find on the Toshiba site. I m not sure but I think you have a model for Canada:
  http://www.Toshiba.ca

  Have you tested the devices USB on another computer laptop or PC? Maybe the problem is the keyboard and/or the mouse and not the laptop.

  Good bye

• T400/T500: Horizontal USB ports are there?

  Are there only vertical on the T400 and T500 USB ports?

  I think that the current T61 and R61 have ports usb place management, having 3 vertical usb ports are cramped on one side makes life a bit difficult for people with usb accessories oversized.

• HP Pavilion g6: My USB ports are no longer works. Can anyone share their expertise?

  I'm going to design mananger and it shows a yellow typical mark next to the universal serial bus. I tried to update the driver but there no driver not installed.

  Hello, I have restart my PC and restore it to its original from the manufacturer. I lost everything on my computer, but it's ok now, my USB ports are working properly. Thank you for your help.

• USB ports are interchangeable?

  I have 8 Ports USB connected to my computer and 3 USB Ports are used by a printer, Scanner and Webcam. I'm sure all three devices are Plug 'n' play.

  The devices work well but that they still work if they have been placed in a different USB port and a new device (e.g. headphones) can be placed in one of the USB Ports 8 or are each USB port ' device-specific?

  Thank you.

  S1

  They will work very well.  Some of your USB ports are more Rapids and those that should be used for devices that can use the speed, if necessary.  What happens is when you switch from one port to the other that a driver for this device is installed on this port.

• Vista - usb ports are not recognized unknown device

  Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Try to connect USB devices to a different USB port and check if you are able to access.

  Method 2:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.

  Method 3:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Method 4:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  You can also check out the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6be4581d-8fbd-407F-815E-b475c35ca586

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• My usb ports are not recognized usb storage damage

  Original title: why is my labtop port shows usb not recognized by vista home basic even though it shows a device installed and ready to use software?

  My usb ports are not recognized usb storage damage

  Hello

  · Do you think any yellow exclamation point inDevice Manager under USB devices?

  Windows vista contains several troubleshooting programs can automatically fix some common problems with your computer. One of them is the hardware and peripheral troubleshooting tool. I suggest you to run the troubleshooter as the first step in troubleshooting.

  Method 1:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: Remove and reinstall USB controllers

  a. Click Start; in the start search type devmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer, and then Windows will reinstall the USB controllers.

  e. plug the removable USB storage device and test to make sure that

• The Device Manager on my Windows box lists a hub USB 3.0 as one of USB controllers. This means that one or more of the USB ports are capable of 3.0?

  I recently bought a backup disk says he would run faster is it my 3.0 instead of 2.0 USB ports.

  Just try to understand the computer itself, if one of the 8 USB ports on my desktop Dell (Windows 7, 64-bit box) is capable of USB 3.0.

  Hi John,.

  The message that Windows gives is Windows telling you put a USB 3.0 device in a USB 2.0 slot and the speeds will be Cap using USB 2.0 footrest.

  If you are looking for your system on the website of Glens, it should tell you if one of the USB ports are 3.0 or not.  I think that USB 3.0 is marked with the blue wire around the ports.

• I need to adjust my bios so that my usb ports are active immediately.

  I can't go in safe mode because my keyboard is a keyboard wired usb and the usb ports are not on the time that I have to press F8 (or any function key). I understand there is a setting that I could make to the registry. Can someone give me the specs?

  I'm using Windows 7 Ultimate 64 bit with a HP Pavilion Elite M9600t

  I bought the Logitech K800. It works very well (touch wood). The function keys, I get into safe mode, etc.

  DETECTIVE CONAN. Thank you!!!

• front usb ports are unable to detect the large capacity external hard drive (250 GB)

  Hello
  I have 250 GB external hard drive, whenever I connect to my front usb ports it detected, but pen drives, are to detect flash drives, one of my friends said that you need to update my bios & I here is the motherboard.

  motherboard: Mercury 945gcm

  It is possible that the USB 1.1 and not 2.0 ports that can explain the problem.  In addition, sometimes USB ports out enough power to run an external device that is not powered separatelly.  I don't know if updating the BIOS will help, but if there is an update available for your system (and it MUST be for your system - big bad can occur if you install the wrong BIOS so get with the computer manufacturer, and speak to a representative to confirm that they are appropriate for your system AND your version of Vista) then by all means install it and see if that solves the problem.  You can also get the updated drivers for the motherboard manufacturer, at the same time and see if that helps as well.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A60 - USB ports are not really high speed

  Hello
  It seems to me that the SATELLITE A60-197ITA USB ports aren't really high speed. They are very slow!
  Some diagnose program says that the BIOS supports USB Legacy...

  What is the problem?
  What can I do to have the best performance?

  Hello

  I put t know what external device you use, but in my view it is also the external device power function.

  Legacy support can be enabled in the HW of Toshiba installation tool. You can find it under control panel.

  Good bye

• Satellite U400 - two of the three USB ports are not working

  Hello

  I have laptop Satellite U400 who has three USB ports.
  One of these 3 ports does not work correctly and the other two ports do not work.
  Is there anyone to show me any solution?

  Thanks in advance,
  Concerning

  Any solution? You mean a magical solution? :)

  No one knows the configuration of the laptop.
  No one knows what OS you are using.
  Nobody knows what you did last time with your laptop.
  No one knows how long you have this problem.
  No one knows what are the USB devices that you use to test USB functionality.
  What you have already tried to do about it?

  You want to have more questions?
  Maybe you should write more than three short sentences as a description of the problem.