Series does not work

Similar Questions

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• Drive DVD/CD of Satellite a series does not work properly

  My computer sometimes starts fast and when it does recognize the DVD/CD player and functioning.
  However when she takes it the start time, it does not recognize that I have a DVD/CD player, when I look in Device Manager to see if
  There is no probs it simply says that the device is functioning properly?

  Does anyone has any ideas at all the

  Would be nice of you if you could give us MORE details; for example what operating system you have, what kind of machine you have and so on.

  It s hard to help someone, when that person said: my CD does not work, then it works then not again. It is not a description of the error.

  PLEASE MORE DETAILS

  THX

• Number of computer evolution series - does not work

  Hello. I recently bought a new MacBook computer without cd rom port. I need to know how to download and install Adobe Creative Suite Design Standard, I had on my old computer. I have a serial number, but it does not work. Any ideas?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Hello my number series does not work... I don't know what I can do:)

  I'll registries my product but my Seriennumber does not work...

  Hello

  Error "serial number is not valid for this product". Creative Suite
  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

  Error failed to validate the serial number | CS6
  http://helpx.Adobe.com/Creative-Suite/KB/unable-validate-serial-number-CCM.html

  To locate the serial number:

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

• I have Adobe Creative suite 2 premium CS2-series does not work when you try to install on a new computer, help!

  trying to install on my new computer did not work because activation is cancled by adobe. Downloaded the adobe CS2 version (https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads) and my serial number does not work.

  What can I do?

  You must use the serial number allowing Adobe to the special download version.

  Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• Orders series does not work with the string constant

  I have a single serial device, I used.  The device requires no handshake.  Simply send a command to the device and the device responds.  I modified the example labview for simple serial communication and that works when I enter the chain command and click the button to send the command to the device.  But when I tried to put the same example of communication series in a simple state machine where I replace the chain control on the front panel with a string constant on the scheme that the standard equipment does not respond.  Where do I go awry with the constant string and the state machine?

  Thank you

  Control of the working channel is \-codes display, while the constant diagram is in normal display. Once you pass the constant \-codes diagram, you will see that it is in fact "/ 1ZR\\r\\n". Switch to \-codes, re - enter the text you want and see if things improve.

• PowerSaver shortcuts on the Satellite a series does not work

  I have almost everything (except Toshiba assist) installed for XP from the download page, but the shortcuts doesn't work for the brightness with the Fn key... In addition, Toshiba controls does not appear in the start menu or does not start after the installation...

  Can you please exact notebook model poster you have? Your laptop comes with the Vista operating system?

• Satellite Internet Wi - Fi T series does not work...

  My router works fine, I press fn + F8 and it says wireless is on, the second little light in right under the mouse pad is on (orange) but I have no internet connection.
  And it's not like I've never had before. everything seems to happen randomly off the coast.

  I thought that maybe there was a switch or soemthing stupid I did, but for some reason when I go into the little icon to the right of the toolbar (which has changed) it asks me my ethernet cable, looking even not all connections.

  I tried to reinstall my router but that did not work. I tried to manually make a new connection, and also somehow tried to force him to get my internet network.
  I am just desperate now and try all sorts of things but nothing works. I feel as if it were a major problem or a fundamental flaw in my COMPUTER skills...

  Please could someone suggest what the problem is, it's really ' mportant I have wireless internet, because I can't work next to the router which is being in my room before, next to my xbox... which is more a distraction than my family using the room 24/7.

  Thank you

  Hello

  First that you must be sure that your router is configured correctly.
  Is it? I mean the router should assign IP addresses automatically to devices that support WiFi network and if you can connect other portable computers to the wireless router, then that means that your router is OK.

  To connect your laptop to the router, you must activate the Wlan first.
  Don't forget that Wlan led is turned on and that you have changed to WLan using FN + F8.

  In network-> properties-> Wlan connections, you should check the settings of the TCP/IP protocol.
  Address IP, getaway, etc. should be awarded automatically.

  Check it!

• Lightroom series does not work

  I just reinstalled lightroom 5 (new PC). I used the serial number for lightroom 5 shown adobe, but lightroom account information tells me its an invalid series.

  The lightroom was bought as 4 and updated lightroom updated to lighroom 5 thereafter. I am tired as the old series with the same result. However, another is listed in account information

  You might have downloaded a Cloud of lightroom version, which won't work with a serial number.  Try to download through...

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Cisco Anyconnect VPN does not work in windows 7 64 bit

  Hello
  I found that the cisco anyconnect (version 3, any series) does not work in windows 7 (64-bit).
  The vpn is connected, but there is not any internet access.

  I tried to solve the problems of:

  -Disabling the firewall.

  -disable the anti-virus etc.

  But while I tried using with 32 bit, it works very well.

  Also, I found that there is not a specific version of anyconnect vpn for only 64-bit.

  Do any body have the idea how to solve this problem, either it's a bug of cisco vpn itself?

  Certainly, you just need to install a later version of AnyConnect.  You need a Cisco, for example a SmartNet maintenance contract, to download the new versions.

• Using the function of scan macOS Sierra HP Officejet 7300 series network printer does not work; He had no problem with El Capitan...

  Printer HP Officejet 7300 network series that allows to work flawlessly with El Capitan does not work after the upgrade to Sierra.

  With macOS Sierra, when used as a network print service printer works fine however scan does not work. Programs like the Image Capture, HP Easy Scan etc does not see the printer. However, if the printer is directly connected to the Macbook Pro using the usb cable, a new printer is added to the list of printers (it shows print and scan functions while the printer network in the list shows only printing function) and the scanner works well with Image Capture, etc. If the usb cable is removed disconnects this printer in the list and there is no way to turn it on. I have the latest update for the printer installed from the App store. It looks like a driver issue, but I wonder if there is a work around for this problem...

  Open Preview.app. Under file in the menu bar, you see import of 'name of your scanner?

• My original opening on a new Mac Mini installation does not work. I have the series or available

  Opening 1 and implemented to date are installed on a MAC Pro: 2 x Dual-Core Intel Xeon 2.66 GHz. memory 5 GB

  Software: MAC OS X Lion 10.7.5.

  Now, I would like to install Aperture on a new Mac Mini: 2.6 GHz Intel Core i5. OS X: El Capitan.

  All the series nor are available.

  But the Mac Mini can't find software to install, even if the disk is in the drive.

  Need your help to tackle this problem.

  Thanks in advance

  Opening 1 does not work on El Capitan. You need minimum Aperture 3 and which is no longer sold. Time for a new plan.

• Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work

  Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.

  With a wireless network test:

  Wireless is on (but light indication only is not lit)

  wireless network card has failed

  "The wireless radio does not work.  Contact Hp support.

  Any help would be greatly appreciated!

  Thank you

  Smithb2

  Hi smithb2, welcome to the forums there.

  I saw your post on the wireless radio does not not on your model Photosmart C309.

  I did some research and came across this post in the community that seemed to have worked for others with the same problem.

  Re: Without the printer wireless radio does not

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Thursday

• Microsoft sidewinder gamepad 2 does not work on the Combat Flight Simulator WW11 and Europe series

  Original title: I have the Combat Flight Simulator WW11 and Europe series. My microsoft sidewinder gamepad 2 does not work on my XP and my Windows 7 computer. The joystick works on CFS2 Pacific. Help, please.

  I have a HP Pavilion p6717c with a radion HD 6900 graphics card. With windows 7 home

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. you get any error message?

  I suggest you to see link below and check if it helps.

  You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer: http://support.microsoft.com/kb/294672

  How to fix game controllers in Microsoft games: http://support.microsoft.com/kb/831361

  Items of Combat Flight Simulator: http://support.microsoft.com/combatflightsimfaq

  Also I suggest you to send your request in the below link.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Hope this information is useful.