Series of HP Photosmart C5100: only half of the print page

Similar Questions

• Only half of the icons showing on personal bar

  Only half of the icons showing on the bookmarks toolbar, but when I go in the toolbar custom, then click on 'Done' they appeared all over again.

  Thank you... I downloaded the latest edition, and that seems to have solved the problem.

• HP Officejet Pro 8620 copier copies only half of the document

  During the adjustment of the glass my copier copies only half of the page. When cope since the charger it leaves one side of my page off the coast. I've only had it a few weeks and do not know what to do. Thanks in advance for any help I can get.

  Hello @mburrand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems to copy output.  I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  In the meantime, I recommend that you perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Windows that display only half of the disk capacity

  I have a new laptop HP EliteBook with Windows 7 SP1 is installed. SSD has 500 GB, but the system is only half of the disk capacity show.

  What can we do?  Thank you.

  

  

  CHKDSK discovered...  0 KB in bad sectors. 719099 KB in use by the system. 65536 KB occupied by the log file. 89854676 KB available on disk. 4 096 bytes in each allocation units total 60636159 the disk allocation unit. 22463669 allocation units available on disk.

  Coincidentally reduce then extend the volume again?

  CHKDSK is essentially a tool of file system and the capacity of the disc that you see in the Explorer disc property is actually the size of the file system rather than the physical size of the volume, the physical size of the volume is based on the head of sector, while the size of the file system is based on the number of clusters (allocation units).  The file system has a total of clusters 60636159 x 4096 bytes = 248,365,707,264 bytes.

  Different size according to the different tools are both correct, but the file system is not using the entire partition, you need to extend the file system with the Diskpart tool.

  At a command prompt, enter the following commands:

  C:\ > DISKPART
  DISKPART > list Volume
  DISKPART > select volume c (here, you can use the figures given by the Volume of the order list or use the actual letter of the volume, in your case 'c')

  DISKPART > extend filesystem
  DISKPART > exit (exit Diskpart)

  Here is a screenshot of the procedure:

  

  The file system extension is relatively safe, but as always you should ensure that you have a good backup of your files before doing any kind of work of system disk/partition or file.

  John

• My printer prints only half of the document, even when I try to print a Test Page. Said troubleshooting that have no problem

  Original title: device: printer

  Dear Sir/Madam,

                      
  I am a user of windows from win98, and I never had a problem with the printer that I couldn't solve. But now, my printer prints only half of the document, and troubleshooting said: there is no problem, I printed the rpinter windows test page, but I only got half! in view of this, I wonder if you would be so kind as to send me the solution to my problem, my resources and understanding have exhausted. Thank you in anticipation of your kind cooperation.

  Hi Sergio,

  We would like to ask after the details with you to help you to come.

  (1) what is the brand and model of your computer?

  (2) don't you make changes to the printer settings prior to this problem?

  (3) is the issue limited to any particular document?

  (4) do you get an error when the printer is unable to print?

  You might face this question when the printer drivers are corrupt or if the Windows service does not work properly. Follow the troubleshooting methods listed below.

   

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link below.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  Check the question and write us with the State of the question. We will help you if you need assistance.

• PrintDataGrid of printing only half of the page

  Hello

  I have a print of my report with PrintDataGrid problem. I just copied and paste the sample code from this site form, but she seems to have a problem. Printing in the book is only half and jump to another page. rank 1-6 is on the first page and the rest is on the next page that was supposed to be on a single page. I am asking your help to find ways to print correctly.

  Here, I have the code:

  FormSalesTransaction.mxml

  <fx:Script>
            <![CDATA[
                 import mx.core.*
                      
                      // Declare and initialize the variables used in the component.
                      // The application sets the actual prodTotal value.
                 [Bindable]
                 public var pageNumber:Number = 1;
                 [Bindable]
                 public var prodTotal:Number = 0;
                 
                 // Control the page contents by selectively hiding the header and
                 // footer based on the page type.
                 public function showPage(pageType:String):void 
                 {
                      if(pageType == "first" || pageType == "middle") 
                      {
                           // Hide the footer.
                           footer.includeInLayout=false;
                           footer.visible = false;
                      }
                      if(pageType == "middle" || pageType == "last") 
                      {
                           // The header won't be used again; hide it.
                           header.includeInLayout=false;
                           header.visible = false;
                      }
                      if(pageType == "last") 
                      {
                           // Show the footer.
                           footer.includeInLayout=true;
                           footer.visible = true;
                      }
                      //Update the DataGrid layout to reflect the results.
                      validateNow();
                 }
            ]]>
       </fx:Script>
       
       <!-- The template for the printed page, 
       with the contents for all pages. -->
       <mx:VBox width="90%" horizontalAlign="left">
            <mx:Label text="Page {pageNumber}"/>
       </mx:VBox>
       <MyComp:FormPrintHeader id="header"/>
       
       <mx:PrintDataGrid id="myDataGrid" 
                             height="100%"
                             width="100%"
                             fontSize="7" 
                             wordWrap="true" 
                             variableRowHeight="true" 
                             fontFamily="Lucida Console" >
            <!-- Specify the columns to ensure that their order is correct. -->
            <mx:columns>
                 <mx:DataGridColumn headerText="Invoice" dataField="InvoiceNo" width="65"/>
                 <mx:DataGridColumn headerText="Customer" dataField="CustomerName" width="100"/>
                 <mx:DataGridColumn headerText="Model" dataField="ModelNo" width="70"/>
                 <mx:DataGridColumn headerText="Category" dataField="CategoryCode" width="70"/>          
                 <mx:DataGridColumn headerText="Price" dataField="Price" width="80"/>
                 <mx:DataGridColumn headerText="Qty" dataField="Quantity" width="35"/>                    
                 <mx:DataGridColumn headerText="Cash" dataField="Cash" width="80"/>
                 <mx:DataGridColumn headerText="Dollar" dataField="Dollar" width="80"/>
                 <mx:DataGridColumn headerText="Cr Card" dataField="CreditCard" width="80"/>
                 <mx:DataGridColumn headerText="B Share" dataField="Bankshare" width="80"/>
                 <mx:DataGridColumn headerText="W Tax" dataField="WTax" width="80"/>
                 <mx:DataGridColumn headerText="Lay Dep" dataField="LayawayDP" width="80"/>
                 <mx:DataGridColumn headerText="Lay Bal" dataField="LayawayBal" width="80"/>
                 <mx:DataGridColumn headerText="Check" dataField="Check" width="80"/>
                 <mx:DataGridColumn headerText="Misc" dataField="Misc" width="80"/>
                 <mx:DataGridColumn headerText="Remarks" dataField="Remarks"/>
                 <mx:DataGridColumn headerText="Lay Pay" dataField="LayawayPayment" width="80"/>
            </mx:columns>
       </mx:PrintDataGrid>
  

  and the way that I call Report.mxml:

  var printJob:FlexPrintJob = new FlexPrintJob();
                      
  if (printJob.start()) {
          var thePrintView:FormSalesTransaction = new FormSalesTransaction();
       addElement(thePrintView);
                           
       thePrintView.width=printJob.pageWidth;
       thePrintView.height=printJob.pageHeight;
                                               
       thePrintView.prodTotal = prodTotal;
                           
       thePrintView.myDataGrid.dataProvider = salesTransaction;
                           
       thePrintView.validateNow();
                           
       if(!thePrintView.myDataGrid.validNextPage)
       {
            thePrintView.showPage("single");
            printJob.addObject(thePrintView, FlexPrintJobScaleType.MATCH_WIDTH);
       }
       else
       {
            thePrintView.showPage("first");
            printJob.addObject(thePrintView, FlexPrintJobScaleType.MATCH_WIDTH);
            thePrintView.pageNumber++;
                                
            while(true)
            {
                 thePrintView.myDataGrid.nextPage();
                                     
                 thePrintView.showPage("last");  
                                     
                 if(!thePrintView.myDataGrid.validNextPage) 
                 {
                      printJob.addObject(thePrintView, FlexPrintJobScaleType.MATCH_WIDTH);
                      break;
                 }
                 else
                 {
                      thePrintView.showPage("middle");
                      printJob.addObject(thePrintView, FlexPrintJobScaleType.MATCH_WIDTH);
                      thePrintView.pageNumber++;
                 }
            }
       }
       removeElement(thePrintView);
  }          
  printJob.printAsBitmap = false;                    
  printJob.send();
  

  Here is the result when I print the report:

  

  I hope you have some time to help me.

  Thankz a lot.

  Can you check and see if the fact no difference if variableRowHeight attribute set to false?

  It looks like a problem of container.

• My HP Photosmart Premium is saying "preparing the printer can not be interrupted. Please wait... "What is happening?

  My HP Photosmart Premium is saying "preparing the printer can not be interrupted.  Please wait... "What is happening?

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Photosmart-premium-error-message/TD-p/1470957

  HP support

  Edit:

  I know that maybe it's a little late to come and see this post was several months ago, but I had the same problem.

  I ended up turning off the machine and opening printer and check the ink cartridges (I had seen just to find the part number for a new cartridge).  I found that the blue cover which snaps into place on the ink cartridges was broken not closed completely.  This has caused the printer constantly tries to go into maintenance mode, but it could never align cartridges.  She also told me that there is a paper jam, even when there is no paper in the machine.  I even let the maintenance run all night without success.

  Once the cartridges have been broken in place and the blue cover has been fully guaranteed, the printer worked.

  above compositions of this thread:

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/HP-OfficeJet-Pro-8500A-plus-printer-is-stuck-in-maintenance-mode/TD-p/1207907

• Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  I tried to do this by using the search but it will find only them, if they occur as a long chain, that is to say "Here's the answer" rather than how they occur in the document it is to say "Here 's" a bunch of information that leads you to 'the answer'. The search feature so standard did not help.

  Then I tried to do this by using the tool to delete (obviously not the application of writing!) because it allows me to search for multiple words or phrases, however it is not highlight what page both are found. I tried to turn on the preference to enable deletions of comments and even if it meant that I could then go through all the comments, it's still not faster than my document is more than 1,000 pages, which meant there were too many total comments for me to be able to easily identify which page had both.

  Any ideas?

  There is no built-in way to search for two strings and limited to show only the results that appear on the same page.

  It can be done by using a custom script, however.

• I have my site almost ready to the master page, but when I drag to copy on the home page or any other page - only 15% of the master page is copied. Why is it happening? Could you please help me?

  I have my site almost ready to the master page, but when I drag to copy on the home page or any other page - only 15% of the master page is copied. Why is it happening? Could you please help me?

  Bernard, I very much appreciate your support & help...

  Neha, Adobe erased my problem... it's guide to footer...

• HP Envy H8-1549: computer doesn't recognize only half of the new Ram

  Hi all.

  I took a set of ram Ripjaws X 32 gig (4 x 8).  When I install all four chips, only half of them are recognized by the Bios. If I remove two, both of which have not been recognized are visible and working in the same locations they were. It all works, but not all.

  Current configuration: http://support.hp.com/us-en/document/c03666767

  RAM: http://www.newegg.com/Product/Product.aspx?Item=N82E16820231569

  Everything I read on my motherboard and ram has indicated that it is compatible. I updated the Bios and erased the CMS.  I'm a bit of a loss. Am I missing something fundamental?

  What is a tension problem? If so, how can I send it?

  RAM is usually such an easy upgrade. Not so much this time, it seems to me.

  Thank you.

  This seller has guaranteed 8 GB modules for the H8-1549 envy.  The specs are "CL11.

• My computer screen only shows half of the content page.

  When you try to play games online, I can only see half of the page.

  Hi chrissy2u42,

  1. this happens with a particular game or all games online?

  2. were you able to play the game before with no problems?

  3. you remember to make changes to the computer before this problem?

  Step 1:

  You can try to change the resolution of the screen and check to see if it helps:

  Change the screen resolution

  Step 2:

  You can also try to update the display drivers and check if it helps:

  Check out the link:

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• How to resize the screen display to use only half of the screen

  in order to write the information to a website in a MS word document, I want to put the site to display browser so the document MS word on the screen at the same time (each 1/2 of the screen (left and right view). How can I do this? I am technically challenged so tell me in the jargon of the primary school

  I can't test this on Windows 10, but...

  On Windows 7, if you hold down the keyboard Windows key, then press the right arrow key, the currently active window will change its form. By example, if the window is maximized it will change occupying half right side of the screen. Hold the Windows key and pressing the arrow key right to scroll to the right, left and restored/resizable. To maximize, use the up arrow key.

  I hope you can use this keyboard shortcut hidden to set each application to the half of the screen easily without having to manually extendable/retractable and move windows. And it's a cool thing that you can share with other people.

• The program monitor shows only half of the picture

  Hi I'm new in preview, for some reason any when I open a photo in the program monitor, it shows that half of the picture, straight cut, in the Center (see below). I used to be able to see the entire photo and add the title and text to it.

  what setting should I bring back to normal?

  

  The first thing I would look at is the Sequence of parameters - click, on the top menu and ensure that the settings are - post a screenshot please. Your program monitor looks like a size extra-large, much wider than the standard ratio 16:9 HD or 4 K.

  The setting sequence is the basis for everything in your project - if it's wrong to start, all you will be affected later.

  Once you have a correct adjustment sequence you are satisfied, still images or video clips you want to use may not be the same dimensions/dimensions you chose for your sequence (such as 1080 p which is 1920 x 1080 pixels). You may have a still picture with larger dimensions, and then it will appear cropped as you currently see as its size does not match sequencing. Think of it as the photo was too big for a picture frame.

  As Jim mentioned, you can use the effect Adobe path across the source to fit, however it can be quicker and easier to simply with the right button of the image on the timeline, and then select define framework - this will automatically go to the media in your sequence.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• printing only half of the text

  I don't see the bottom half of the text when I print my document. How can I solve this problem?

  Hi Casshirtz76,

  Open the drive, go to menu help & repair the installation.

  Otherwise try to print as image PDF print as image. Adobe Acrobat, Reader.

  Check if it solves your problem.

  Kind regards
  Nicos

• When I import .wmv files, only half of the clip appears

  I really need help when I import .wmv files in adobe after effects creative of clouds that the bottom half of the clip appears (as I just installed quick time) here is a screenshot:

  

  Thanks - Sleak

  E-mail: [email protected]

  Skype: Sleakk

  Refer to this:

  WMV files corrupt on import / export

  Mylenium