Windows that display only half of the disk capacity
I have a new laptop HP EliteBook with Windows 7 SP1 is installed. SSD has 500 GB, but the system is only half of the disk capacity show.
What can we do? Thank you.
CHKDSK discovered... 0 KB in bad sectors. 719099 KB in use by the system. 65536 KB occupied by the log file. 89854676 KB available on disk. 4 096 bytes in each allocation units total 60636159 the disk allocation unit. 22463669 allocation units available on disk.
Coincidentally reduce then extend the volume again?
CHKDSK is essentially a tool of file system and the capacity of the disc that you see in the Explorer disc property is actually the size of the file system rather than the physical size of the volume, the physical size of the volume is based on the head of sector, while the size of the file system is based on the number of clusters (allocation units). The file system has a total of clusters 60636159 x 4096 bytes = 248,365,707,264 bytes.
Different size according to the different tools are both correct, but the file system is not using the entire partition, you need to extend the file system with the Diskpart tool.
At a command prompt, enter the following commands:
C:\ > DISKPART
DISKPART > list Volume
DISKPART > select volume c (here, you can use the figures given by the Volume of the order list or use the actual letter of the volume, in your case 'c')
DISKPART > extend filesystem
DISKPART > exit (exit Diskpart)
Here is a screenshot of the procedure:
The file system extension is relatively safe, but as always you should ensure that you have a good backup of your files before doing any kind of work of system disk/partition or file.
John
Tags: Windows
Similar Questions
-
Hi all
I have a situation that needs solving. When you create my virtual machine in Windows 7 (64-bit) on my Mac, I set up as a 10 GB machine. Later, I decided it wasn't enough, so I happened to 20 GB (préalloués checked and divided into 2 GB verified). However, the C: drive of my Windows vm is still appearing as Go 9.99, rather than 20 GB.
So my question is, how can we get the C: to reflect the correct space préalloués on the virtual machine file Windows 7 on my Mac? Images are fixed below to show my problem.
Much appreciation to all those with any help/ideas. Thank you!
Welcome to the community,
increase the file system is a task in the 2 step. First of all, you must increase the size of the virtual disk (which you already did) and then you must resize the partition in the guest operating system. In the case of Windows 7, you can do this using the 'disk management '.
André
-
Windows that display only a 1 TB SATa drive 32 GB
Hello. Recently, I tried to upgrade my HP dc5700 small Form Factor PC XP Professional SP2 to Windows 8 Pro. A disk read error occurred during automatic reboot, which meant that I couldn't finish the upgrade. I had to restore the system using my HP recovery DVD, but that did not work, so I chose the format & recover, which seemed to work until I realized that I only had 32 GB of available disk space on the hard drive of 160 GB. I thought it must be a hard drive problem, so I installed a not 1 TB hard drive and reinstalled from the recovery disc. But the problem is still there. I checked the BIOS and I have the latest version: 786E2 V02.09. Any ideas?
No problem. As I had everything backed up in any case, I decided to cut my losses and installed Windows 7. Problem solved :-)
-
I have a computer that has Windows 2000 Pro, I can use the disk to upgrade to Windows XP with this OS? It's
an old computer, but it works very well. I want to switch to XP using the Windows upgrade disc. But
in the specifications it lists only 98, 98 Second and ME as an operating system you can upgrade. Thanks John
Provided the specifications of the computer meets Windows XP you can switch from 2000 to XP. If it does not meet the specifications, you may upgrade the computer first or get a new one which is more cheaper today.
In addition, please note that you can only switch to Windows XP Professional. If it is a home edition you have then it will not work. You can refer to the link below on how to update your copy of Windows 2000 to Windows XP Pro.
-
Original title: device: printer
Dear Sir/Madam,
I am a user of windows from win98, and I never had a problem with the printer that I couldn't solve. But now, my printer prints only half of the document, and troubleshooting said: there is no problem, I printed the rpinter windows test page, but I only got half! in view of this, I wonder if you would be so kind as to send me the solution to my problem, my resources and understanding have exhausted. Thank you in anticipation of your kind cooperation.Hi Sergio,
We would like to ask after the details with you to help you to come.
(1) what is the brand and model of your computer?
(2) don't you make changes to the printer settings prior to this problem?
(3) is the issue limited to any particular document?
(4) do you get an error when the printer is unable to print?
You might face this question when the printer drivers are corrupt or if the Windows service does not work properly. Follow the troubleshooting methods listed below.
Solve printer problems
You can check the link below.
Why can I not print?
http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print
Check the question and write us with the State of the question. We will help you if you need assistance.
-
HP Officejet Pro 8620 copier copies only half of the document
During the adjustment of the glass my copier copies only half of the page. When cope since the charger it leaves one side of my page off the coast. I've only had it a few weeks and do not know what to do. Thanks in advance for any help I can get.
Hello @mburrand welcome to the Forums of HP, I hope you enjoy your experience!
I see that you are having problems to copy output. I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.
Mac OS X: how to find which Mac OS X Version is on my computer?
Operating system Windows am I running?
Is the Version of Windows on my computer 32-bit or 64-bit?In the meantime, I recommend that you perform a power reset. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.
Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!
-
Only half of the icons showing on personal bar
Only half of the icons showing on the bookmarks toolbar, but when I go in the toolbar custom, then click on 'Done' they appeared all over again.
Thank you... I downloaded the latest edition, and that seems to have solved the problem.
-
original title: problems of Windows update/upgrade
I'm currently trying to install Windows 7 on my desktop running Vista.
Whenever I run the Setup it comes up with the following error: Windows could not retrieve information about the disks on this computer.I already put the virtual disk on auto and rebooted several times. I get the same error.Also, I tried to update my computer by using the windows update thinking that would help... Windows update decides to not work either! It comes up with the error: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.gain, I restarted and it still does not work.I am currently running Windows Vista 32 bit on my desk (I thank God for my laptop!).Help!
First, run Windows 7 upgrade advisor:
Windows 7 Upgrade Advisor
http://Windows.Microsoft.com/UpgradeAdvisorNote the results and make sure to follow the steps.
Try to install Windows 7 using the USB
Install Windows 7 with a USB memory key
http://www.winsupersite.com/article/Windows-7/install-Windows-7-with-a-USB-memory-key -
I am running windows 7 on new laptop - everyonce in awhile, I get a pop up window that indicates "you run lack of disk space on BRFD-Drive (g) click here to see if you can free up space on this drive"-it's a legitimate dialog or malware?
Ready boost is a piece of software that uses an external flash as SD card memory / Compact etc. as memory cache that the computer can use... as virtual but faster memory.
-
Windows that display no real sign and how can I activate it now? Display of error 0xC004c008
Windows that display no real sign and how can I activate it now? Display of error 0xC004c008
http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004C008
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
-
I have CS4 software. When the first time I install, I chose the content of the normal installation. Then I found that there is no photoshop in the start menu. After that, I try to put the disk in the laptop and find it didn't photoshop on the list "installation."
Download the files to install cs4 design premium and install ps to use them,
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- Lightroom: 5.7.1. 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5.5, 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
bought a new windows 7 service pack 1 as my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop
my laptop is a lenovo
On Sunday, October 5, 2014 12:59:11 + 0000, dougdgp wrote:
bought a new windows 7 service pack 1 as my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop
my laptop is a lenovo
Depends entirely on this laptop you have. If it has a 64-bit processor
You can use 64-bit Windows. If a 32-bit CPU, you can't.If you don't know you have, hold down the Windows key and press
Break | Break. It will tell you if you have a 32-bit
processor or 64-bit processor. -
Is there any application that searches all files on the disk or server which also indicates the total and available space? And after a search, it can also be exported to excel for further analysis?
Hello
See if that helps you.
This free program allows you to see what is taking place.
http://www.Jam-software.com/treesize_free/
Here's how to understand Treesize Screenshots:
-
Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?
Log, activation, or connection errors. CS5.5 and later, Acrobat DC
https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
Why there is no data type that stores only date (without the part of hour)
Hi all
Is there a particular reason to not have a data type that stores only date (without the time part) in ORACLE - I'm asking this because the DATE (without a time) is a type of data very frequently used in any application.
Thank you.884476 wrote:
In fact, I was reading about the types of data...We have numbers with details. According to the argument above it is not necessary. We need only a default type NUMBER.
It depends on. Much of the work that we do, we only create just like NUMBER and don't worry precision. However for financial purposes, a clarification for the monetary values of the application can be very important.
In the same way do all the varchar2 (4000) character data type. Why we would require an option to specify the length... ?
Because you can limit the size of the string that can be stored.
I see what you're saying, but that's just the way it is. Why Oracle would need to confuse the issues by having several types of data to store the type Date and DateTime requiring an explicit or implicit conversion to be necessary, or provide an indicator of accuracy against the date where this indicator of precision would take of additional storage space on something that is already only 7 bytes.
There will be internal historical reasons why it has happened this way... but really there is no need to worry.
Maybe you are looking for
-
My app store apps is not allow me to update the applications that are on my iPad. Need solutions. Email me at * *.com < Email published by host >
-
Satellite L750: HDD LED lit almost always - very slow system
Hello!I have a TOSHIBA * L750 - 13 L * laptop with part #: * PSK30E-00R00EG4 *.The system was fast, but then one day suddenly it got very very slow. White led disk light remained on and opening the usual document (or even the jpg photo) obtained extr
-
The update installs several times
No matter who managed to het this KB to repeat update. its driving me crazy. just installed his back.
-
Frequent crashes on Vista - computer does not crash in SafeMode with network.
Original title: Windows Vista crashes constantly. Computer only works in safe mode with network. My computer freezes after a few minutes in normal mode. The only way to make it work is in Mode safe mode with networking. It started yesterday aftern
-
Install the instant backup server Memeo does not
to install the server does not Hi, I tried to install memeo instant backup, a program of a product I have recentley bought. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see