Serve the PowerEdge 2900 - disco rotto

Similar Questions

• The PowerEdge 2900 server RAID

  Hello everyone and good day

  I have a PowerEdge 2900 which was erased and raid configured with 2 discs and ready for os install. However when you try to use the Server Wizard, I get an error that his stats can not detect readers or they are not initialized. I do all the raid configuration and should be ready. I took a peek in the bios of the main server and I do not see listed in the boot sequence raid controller. all I see is cd rom on b sata and hard drive. until the server has been annihilated the raid controller has been listed in the boot sequence menu. I changed a setting that I shouldn't have or I am missing a part of the process? No matter which lend a little and fix this? I would like to get the server operational return. the server has a perc 6i

  When I got is the server was running. However, he came from a health care facility and had to be wiped.

  I have it wiped myself just by going to the raid controller and removing the VFD and reconfiguring with new configuration.

  Please tell me that I don't have just the weight of the heavier paper in my office.

  You must configure AND initialize the virtual disk (table)... tick all the boxes advanced and Initialize during the creation of the VFD.

  You can also use a version of "server Wizard" (obsolete) that does not support the hardware in your server.

• Ordine brain DELL POWEREDGE R720 - disco rotto

  Buonasera,

  I wanted to get one offer by the di UN SAS price disco da 7.2 krpm 1 TB 2.5 "by server of he DELL POWEREDGE R720 nostro.

  Grazie.

  Saluti,

  Buongiorno,

  Può acquistare disco it a questo link

  Accessories.euro.Dell.com/.../Category.aspx

  Marco

• PowerEdge R610 - Disco rotto [GRO]

  Salve,

  We have a DELL Poweredge R610 Server e uno dei brain

  SAS MBC2073RC Modello da 73 GB 15 K RPM pulito rotto.

  Potete inviarci UN preventivo by his sostituzione?

  Speaking saluti,

  ING. Lucadei Carlo
  Village of speech s.r.l.

  Salve,

  the sto contattando by mail by the quotazione mandarle

  Saluti,

• The PowerEdge 2900 4 system fan failure

  Good afternoon

  Nobody knows precisely who fan, this might be? Someone has a diagram pinout for this MB? NX642

  The server is 60 miles away and I am trying to determine what fan it is if I can order the part first.

  Thanks for any help.

  Yes, it is the fan that blows down on the memory sticks.

• PowerEdge 2900 Perc 6 / i internal Raid Controller

  OK, so I use a server Dell PowerEdge 2900 with a PERC 6 / i integrated RAID controller

  I have configured the RAID array very well, installed Windows 2008 R2 and works fine and dandy

  The only problem I encounter is that, when starting the server (Post), I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  Thank you

  Hello

  joeyjojo56

  I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  PERC connector 0 goes to the bottom of basket. Connector on the PERC 1 connects to the modular Bay. If you don't have the module Bay optional then you ensure that you use the 0 on the PERC and not the connector 1.

  Thank you

• PowerEdge 2900 III support xeon x 5470?

  I was wondering if someone can clear this up for me. Can the poweredge 2900 III helps the xeon x 5470 cpu?

  The confusion around this for me comes from the dell documentation, I found on the poweredge 2900 III server that has she supports the xeon 5400 BUT at 3.16 GHz cpu series. The xeon x 5470 3.33 GHz is rated.

  However I saw many times poweredge 2900 III running of x 5470. a quick search pulled up from a few ebay listings for this server with the same cpu. Could there was an update of the bios that allowed support for this processor, and dell documentation is just outdated?

  So, due to conflicting information I see before I go and spend money, can anyone provide me a concrete answer on the question of whether I can run this processor or not?

  Expired documents. The data sheet is dated September 11, 2007, the X 5470 was released in 2008. So there was a BIOS update to add support OR it has not been listed everything simply because it did not yet exist.

  1. There are systems with this CPU.

  2. they are sold by dealers known for this computer.

  It can work in an III, and I recommend the update of the BIOS (and other firmware system) at the latest prior to installation.

• Fan Poweredge 2900 [MS]

  Buongiorno,

  MI servirebbe UN preventivo per una fan (fan 3 of the TR e rotta) by server it Poweredge 2900.

  SE necessario posso mandarvi in the service tag it privato.

  Grazie.

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• PowerEdge 2900 - size USB drive external Maximum

  Hello

  I inherited the responsibility for a Poweredge 2900 server last year. Recently, asked me to mount a NTFS 5 TB external USB drive.

  This failed with the following message is displayed:

  $ mount/mnt/external_usb_3
  Cannot read the last sector (1220940596): invalid argument
  TIPS: The volume is a RAID/LDM, but it was not yet, the installer
  or it was not setup correctly (for example by not using not not mdadm - build...).
  or a bad device tries to be mounted,
  or the partition table is corrupt (partition is smaller than NTFS).
  or the NTFS boot sector is corrupt (size NTFS is not valid).
  Failed to mount ' / dev/sdf1 ': invalid argument
  The device "/ dev/sdf1 ' is not a valid NTFS partition.
  Maybe you selected the wrong device? Or the entire disk instead of one
  partition (/ dev/hda, not/dev/hda1)? Or vice versa?

  I know the Poweredge 2900 has a limit of drive HARD internal 2 TB because of the PERC5 / i controller. Is this also true for external USB drives? Or is this another limitation HW or OS? I was reading the documentation and found no (or too looked) the answer.

  Is it possible to mount a drive of this size of form/repartitioning fitness?

  Thank you

  Brendan

  I don't think that USB would have this type of prescription, unless there was a problem of driver forbidding him. Material, I would say 'no '.

• Compatibility of PowerEdge 2900

  I'm currently checking the Compatibility Guide and I can't find the PowerEdge 2900 III but not the PowerEdge 2900 for VSphere

  I can't find anything on my systems I have a 2900 III. I only 2900.

  Will I have questions if I go from 3.5 to 4?

  Thank you!

  VMotion will work with compatible processor but if you insatll integrated you must have 2900 III

• PowerEdge 2900: sostituzione disco

  Buongiorno,

  UNO dei brain (posizione 0:0:3) da 300 GB del nostro Server PowerEdge 2900 DJWX34J e guasto, I would certainly tag. Potete contattarmi UN preventivo?

  Grazie, speaking saluti.

  --

  Marcello Mancini

  Neosperience

  Buongiorno, the ho mandato one just ' email riguardo alla on request.

  Saluti

  Marco

• PowerEdge 2900 DJWX34J tag: disco sostituzione

  Buongiorno,

  UNO dei brain da 300 GB del nostro Server PowerEdge 2900 DJWX34J e guasto, I would certainly tag. Potete contattarmi UN preventivo?

  Grazie, speaking saluti.

  --

  Marcello Mancini

  Neosperience

  Buongiorno, the sto contattando by mail.

• Request Sostituzione disc by server PowerEdge 2900 III [GRO]

  Buongiorno,
  avrei need di auswechseln uno degli hd led raid 5 sul mio Server PowerEdge 2900 III (serial number ).
  He e modello a Western Digital WD800JD - da SATA WD Caviar SE - 75MSA3 - 80.0 GB - 7200 RPM.
  Indicarmi di e price terms could he prezzo?

  Grazie

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the spedizione (intervento o):

  1. company name:

  2 address:

  3 City:

  4 Provincia:

  5 cap:

  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione

  1 nome società (o codice client o number order recent):

  Address 2:

  3 City:

  4 Provincia:

  Heading 5:

  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  7 partita IVA

  Speaking saluti

  Fabrizio

• Setting up multihomed PowerEdge 2900 for the fault tolerance

  I try to configure a PowerEdge 2900 server with two network cards on the same subnet-tolerant, but cannot find a way to do it properly. I found this:

  http://support.Microsoft.com/kb/175767/en-us/

  who says:

  "Some manufacturers are tolerant network adapters to guard against a single point of failure. These adapters enable two adapters to be placed in the same server, but only allow the use of an adapter at the same time. If the primary card fails, the driver disables the first card and activates the second with the same address configuration. The end result is a pretty seamless transition to the replacement adapter. This is the preferred method to guard against a single NIC as a single point of failure. »

  That it applies to PowerEdge or is there another way to set it up?

  Thank you.

  Paul

  
  

• PERC 6 / i driver 2.24.0.64 PowerEdge 2900 running Windows Server 2008 (64-bit)

  Anyone know where I can find the Perc 6 / i driver 2.24.0.64 for a server PowerEdge 2900 running Windows Server 2008 (64 bit)?  It is not part of the package of latest firmware and I am getting an error on OpenManage Admin I have to upgrade to it.  Any help would be great.  Thank you

  Jeff

  http://downloads.Dell.com/FOLDER89865M/6/DELL_MULTI-DEVICE_A03_R210510.exe