Fan Poweredge 2900 [MS]

Similar Questions

• PowerEdge 2900 Fans full speed, amber LCD but no text

  I have a Poweredge 2900 which powered on and boots. But fans come to full speed and the front LCD is amber and speechless. He pitied the Remote Access Controller initialization failure. It starts up fine otherwise fine.

  I tried updating the BIOS to 2.7.0 and disconnect all power and remove the CMOS battery. But I can't always clearly the problem.

  What can I do about it?

  Photos here

  http://i.imgur.com/Fh1aDp1.jpg

  http://i.imgur.com/Q3LStpK.jpg

  Hello.

  Speed of the fans of the system is governed by the DRAC/BMC. Attempt to update the BMC http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=C6H4X Else do a soft

  reset the DRAC.

• PowerEdge 2900 showing predicted failure after disk replacement

  Hello

  I posted this same message in the forum of the disk drives, then I realized there's a specific forum for disks hard server so I'm copying here.

  We have a Poweredge 2900 with HDs 2x500Gb on RAID-1. One of the drives has failed and we replaced it with an identical disk that works very well (same brand, model number Seagate, etc.), but without a Dell PN.

  After replacement, the controller began to rebuild the RAID, but it shows "predicted failure = Yes" for this new album. The disc is currently still under reconstruction.

  One thing to notice is that apparently the Perc firmware is outdated. OpenManage shows that the current Perc 6 / i firmware version is 6.0.2 - 0002, and the minimum required version of the firmware is 6.2.0 - 0012. If I go to the Dell support site and enter a label for the Server service, it shows me a download available for the Perc firmware with version 6.3.3 - 0002.

  The questions are:

  -Is generally allowed to use not Dell certified readers if they are of the same brand and model as the other disk?

  -How would I determine the source for the warning of predicted failure?

  -It would have something to do with obsolete Perc firmware? Are there risks associated with Perc firmware upgrade?

  Thank you very much in advance for your help!

  --
  Julio.

  Update for our fans to the forum thread. Original poster concluded that used replacement drive was indeed bad. He is later replaced by a good drive and will update the server accordingly.

• PowerEdge 2900 switchable hot

  I have a Dell PowerEdge 2900 running windows Small Business SERVER 2003, we will be taken out of service soon, but we just had a departure by car to go bad - seeing yellow flashes and error on LCD server message: 'E1 H10 HDD1 fault.'   daily backups and weekly regular running properly because of corruption, then I copied the table as a security measure.  I bought a new drive identical to the 4 existing disks that are configured as Raid 1.

  The drive is a:
  341-4430 750 GB 7.2 K rpm Universal SATA 3Gbps 3.5-inch hard drive

  The raid controller is:
  341-5754 1 SAS/SATA embedded RAID 1, PERC 6 / i integrated/SAS6/iR

  Can I leave the server running and pull the wrong drive and drag the new, without running applications before or after this procedure, and will be automatically rebuild the raid?

  I know that I need to replace the server.  But my immediate need is to solve the problem of bad disc, and I'd appreciate any advice or a link to the instructions in this procedure.

  We are a small non-profit and have none of the staff and no budget assistance, or I would have called in help.

  Thank you

  Jeff

  It is a Dell application that will interface directly with the hardware. It must be installed on any Dell server that you manage. On the downloads page, it is called OpenManage Server Administrator - Managed Node, use the 32-bit version.

• PowerEdge 2900: sostituzione disco

  Buongiorno,

  UNO dei brain (posizione 0:0:3) da 300 GB del nostro Server PowerEdge 2900 DJWX34J e guasto, I would certainly tag. Potete contattarmi UN preventivo?

  Grazie, speaking saluti.

  --

  Marcello Mancini

  Neosperience

  Buongiorno, the ho mandato one just ' email riguardo alla on request.

  Saluti

  Marco

• Dell PowerEdge 2900

  Buonasera

  avrei need di UN preventivo per sostituzione di UN riflettore ridondante 930W cod.

  DP/N 0KX823 da sul Server PowerEdge 2900 con service Tag 2JS694J fuori co.

  Grazie

  Speaking saluti

  Giorgio Guizzonato

  Buongiorno,

  will one OTS ' email al fine di poter manage the request.

  Grazie

  Marco

• POWEREDGE 2900 RAID 10 HAS NOT DEGRADED

  Hello

  I have a Setup raid 10 on a server PowerEdge 2900, Perc 6 / i. There are 4 250 GB drives, set up as a Raid 10. A drive has failed. I tried the disk with a hot swap size even more recent. The server crashed and restarted, Post message showed during initialization F/W and writing degraded disk virtual, but restarting Ok. When I OpenManage it shows degraded and only shows 3 locations of the physical drive page. New drive is orange flashing on the right indicator light.

  Can someone help me with the permutation of the reader?

  Thank you!

  Madmin46

  Is that possible given that the new drive is not a certified dell disk that would cause problems?

  Yes, and that's the most likely cause. Some versions of the AR4 are posted on several PERC controllers. Many times non-certified readers will work fine, but when certified and non-certified are run together, there are often questions... thinking that it is a American, South African and a Pilipino all English - speaking it may be difficult for the three to communicate because they all talk about the different versions of the same language, and language gap can cause problems on a controller which the tolerance of error and delay (patience) are thin.

• Is - this motherboard for Dell Poweredge 2900 gen. I, or GEN III

  Hi @ all,

  I recently this MB + accessories from a friend and I wanted to get this in life now. But to do this, I need some information about it. If I can get the right processors

  According to my friend, this MB support socket 775 CPU, but according to the data sheet @ dell.com, it supports socket 771 processor. Now, I'm a little confused about the...

  the MB model is: CN-0TM757-13740 - 74G - 0278 REV A01

  I hope that someone can give information me...

  Thanks in advance!

  Greetings from the Germany

  Benny

  I'll add pictures to this post as well

  

  It is a mother Board of generation 1 for a PowerEdge 2900 server.

  Your friend is wrong, the documentation is right (go figure): Socket 771.

  Xeon 5160 is the best processor released for this version of Office.

• PowerEdge 2900 on board sata ports

  I have a PowerEdge 2900 server and would like to put in a single spare 2 TB SATA for additional storage (non-critical).  The motherboard has two onboard SATA, A & B ports.  When I try to connect the drive onboard SATA ports, the BIOS does not detect anything, and when I change the type 'Auto', save the settings and restart settings are not stored in the BIOS.

  I don't know if the SATA motherboard ports supports hard drives, or if there is other reason things do not work.  I tried different cables and tried the drive in another computer, and everything works fine in another computer.  Plan to put in some additional SAS drives in the drive box, I'm looking for an intermediate solution.

  Any help is appreciated.

  Thank you
  Josh

  I've seen this same problem and fixed it. He must go to "Shipped" in the bios and enable "Onboard Sata".

• PowerEdge 2900 DJWX34J tag: disco sostituzione

  Buongiorno,

  UNO dei brain da 300 GB del nostro Server PowerEdge 2900 DJWX34J e guasto, I would certainly tag. Potete contattarmi UN preventivo?

  Grazie, speaking saluti.

  --

  Marcello Mancini

  Neosperience

  Buongiorno, the sto contattando by mail.

• DELL Poweredge 2900 - disk failure

  Hello

  We have an old Dell Poweredge 2900 our SQL Server database running server.  Last week, we discovered that Raid 5 is degraded and disk 0 disk 1 is seeing completely to the bottom and the poster.  We were already down, so even if we had it running by buying a replacement of the SAS 146 GB 10 k disk we would still be short of storage of data of space.  I bought a SAS Seagate Cheetah 15 k 600 GB ST3600057SS and I would like to replace the failed drive with it.

  Question:

  (1) open handle is not installed, but want to install.  What version I can use for this 2900 server.

  (2) my replacement of a 146 GB with a 600 GB can work?

  Please for your advisor as this database server is essential for my operation of the company.

  Thanks in advance

  Hello.

  ISOSA

  (1) open handle is not installed, but want to install.  What version I can use for this 2900 server.

  Download OpenManage Server Administrator v7.4.0.2 form this link: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=MGRG4

  ISOSA

  (2) my replacement of a 146 GB with a 600 GB can work?

  Replacing 146 GB with 600 GB of disk drive will not provide any extra space you need because the table will use only 146 GB of total space 600 GB on the new drive. What controller you have installed? In case the only option available for you that your controller does not support the extension of ability online (ECO) could be to backup your data, delete the existing RAID array and re - create another table with the new readers of 600GO. Restore data from backup and re-install the operating system.

• PowerEdge 2900 Perc 6 / i internal Raid Controller

  OK, so I use a server Dell PowerEdge 2900 with a PERC 6 / i integrated RAID controller

  I have configured the RAID array very well, installed Windows 2008 R2 and works fine and dandy

  The only problem I encounter is that, when starting the server (Post), I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  Thank you

  Hello

  joeyjojo56

  I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  PERC connector 0 goes to the bottom of basket. Connector on the PERC 1 connects to the modular Bay. If you don't have the module Bay optional then you ensure that you use the 0 on the PERC and not the connector 1.

  Thank you

• Dell PowerEdge 2900 - need to use internal drives for RAID

  Hi all

  I am the I.T. guy for small business from my father. I help them on the side.

  They have recently purchased a PowerEdge 2900 server used with 4 internal SCSI drives

  This server also has a Dell SAS 5 / i integrated controller

  I want to install Windows 2008 R2 standard on this server and use it as a file server and a place to host QuickBooks Enterprise.

  The problem, in that I am running is that I can't find in the Bios or anywhere in the server startup utilities where I can configure the 4 internal drives as a RAID 5 array. I want to do this and THEN install the Windows Server operating system. I used the last Build Server utility Dell and also updated all the firmware to the latest versions. The Build Server utility doesn't let me configure the RAID array.  What I'm missing here?

  Thank you very much for your help!

  I upgraded to a PERC 6 / i integrated RAID controller and now problem is solved. Just need a new controller internal RAID.

  Problem is solved!

• The PowerEdge 2900 server RAID

  Hello everyone and good day

  I have a PowerEdge 2900 which was erased and raid configured with 2 discs and ready for os install. However when you try to use the Server Wizard, I get an error that his stats can not detect readers or they are not initialized. I do all the raid configuration and should be ready. I took a peek in the bios of the main server and I do not see listed in the boot sequence raid controller. all I see is cd rom on b sata and hard drive. until the server has been annihilated the raid controller has been listed in the boot sequence menu. I changed a setting that I shouldn't have or I am missing a part of the process? No matter which lend a little and fix this? I would like to get the server operational return. the server has a perc 6i

  When I got is the server was running. However, he came from a health care facility and had to be wiped.

  I have it wiped myself just by going to the raid controller and removing the VFD and reconfiguring with new configuration.

  Please tell me that I don't have just the weight of the heavier paper in my office.

  You must configure AND initialize the virtual disk (table)... tick all the boxes advanced and Initialize during the creation of the VFD.

  You can also use a version of "server Wizard" (obsolete) that does not support the hardware in your server.

• POWEREDGE 2900 - Perdita configurazione RAID [GRO]

  DELL POWEREDGE 2900 server

  Service etiquette: 82ZCL2J

  Buonasera

  Ho avuto no problem with there server sopra remainder. Non viene più caricato launch Windows. Dopo essere nella configurazione del raid entered, ho visto che non era più any configurazione impostata! (He raid age settato l 1).

  I have brain comunque non hanno personally I dati. Otherwise riconfigurare wanting it raid e vedere is it server riparte.

  Pero mi'd sapere come e stato possibile? It could be he controller guasto? Ed inoltre non having the che non possa ricapitare e possibile auswechseln tell it controller?

  Grazie

  Saluti

  Salve,

  Poter riconfigurare is he raid controller e tutto miss it to content. He reason by cui configurazione TR e persa could not dipendere dalla raid controller, banalmente a riavvio aspettato no la has uno sbalzo di corrente Può generare problemi di questo tipo caso in some.

  There's sono presenti sul nostro sito, especially sulla brain/raid controller firmware news.

  Saluti