Server Connectitivity by VPN
Dears
I am facing problem when my users connecting the server closed by IPSEC VPN. Some of them connect so that someone can not. Users also facing problem to connect to the same server again. I paste the configuration below. Please give me a solution
crypto ISAKMP policy 1
BA 3des
md5 hash
preshared authentication
Group 2
life 7200
!
crypto ISAKMP policy 2
BA 3des
preshared authentication
Group 2
!
Cisco group crypto isakmp client configuration
key OQSPhFQ 6'iT_XbddbPA ^ E ^ dKN'Q ^ PGV\UaUdHAAB
DNS 192.168.10.10 192.168.10.11
pool for remote vpn clients
ACL VPN_ACL
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac cisco
!
crypto dynamic-map client-vpn 100
the transform-set vpn-client value
market arriere-route
!
!
test card crypto-address Loopback1
card crypto test client authentication list authentic
crypto isakmp authorization list author test card
card crypto test client configuration address respond
test 10-isakmp ipsec vpn-client dynamic crypto map
!
!
!
VPN_ACL extended IP access list
host ip 10.10.56.50 permit 10.1.1.0 0.0.0.255
host ip 10.10.85.85 permit 10.1.1.0 0.0.0.255
Hi, Ali Abdu
Please try the below command
crypto ipsec nat-transparency udp-program in global mode. So please let me know
Monia
Tags: Cisco Security
Similar Questions
-
PIX515 can serve as a VPN client?
Configure vpn network Corp. at a distance without static IP (get a random IP at a conference)
I have a spare PIX515 and a router 2600 spare - none of them is used as a VPN client?
Hello
I'm sorry to inform you that the information provided in the first response are not true. The only material of Pix that HW customer support in an environment of EZVpn are 501 Pix and 506th Pix ONLY.
Here you will find the note it says
Note: The 501 PIX and PIX 506/506E are the easy VPN server and Easy VPN remote devices. The PIX 515/515E PIX 525 and PIX 535 are only easy VPN servers.
I hope this helps.
Mike
-
How to increase the speed of work and avoid the "Server timeouts" with VPN and?
Hello!
I am faced with slow work and delays in Thunderbird to my Linux.
I have 4 accounts (3 are connected via IMAP) and two of them runs very slowly. Fear that every time I see annoying message at end of the period of the server and each message (same old) opens very slowly and sometimes doesn't open.
It maybe the problem in services postal themselves, or illustrated by the 4th account is Exchange (which work much faster in fact), but I need to manage that somehow. I think I had a fast enough internet connection.
I know that the server timeout could be increased, but I have not found this option in the settings. I have 31 TB, and all the settings, I found in Google seems to be linked to the old version with the old interfaces. I went to advanced settings, I'm not sure that it's settings and what value it must contain.
In addition, has something like 'caching 'mail TB? I mean, during the reception of the new letter - it is "cached" locally, so when I try to read - local version is used until "cache" is cleaned. But when I delete or move the letter to another folder - happening also at the level of the server. I think that if TB could sync all mails and store their values locally this will work much faster.
Thanks for any possible solution to this.
It seems to me that I found the root cause of the problem)
Problem is not in TB, but in these 2 mail services itself. They work poorly when vpn works.
Will address this issue for messaging services.
-
X 220-problem of server terminal server / 3 G / VPN
Hi all
I have two X 220 with identical problems. The procedure to connect to our server terminal server (Windows 7, server = v2008) is:
-connect to the internet
-connect to the VPN (using the Version of Cisco VPN Client 5.0.07.0290)
-connect to the server terminal server
Everything works well when it connects via WIFI - and everything works well when it connects via the modem to broadband integrated into the X 220 until trying to connect to the terminal server. Then he said: Remote Desktop cannot find the computer XX.
That is, everything works fine up to this point. This includes plenty of internet work in 3G and VPN connection succesfull.
Since I have two identical machines - this should exclude material errors. It must be software.
Ideas? Anyone?
My colleague has managed to find a solution. Install this update did the trick:
FTP://files.Citrix.com/dneupdate64.msi
Best,
Finn
-
Installation of Server IPSec RV130W VPN router
Recently, we bought 2 routers RV130W and didn't have problems establishing an IPSec VPN tunnel from site to site between 192.168.xxx.0 and 192.168.yyy.0 now on one of the routers (192.168.xxx.1) I want to configure the section of Server client IPSec for remote clients can VPN into the business. When I try to do this on the router I don't able to assign a subnet to 192.168.xxx.0 in the Phase 2 section like it says then on the interface "rule is already in use. I think that you can not have IPSec site-to-site and client-to-site IPSec running simultaneously on these routers? I'm not really interested to use PPTP in that moment.
Hi Brian,.
Please remove the Configuration of the Tunnel, start to configure the VPN server, first and after that set up the VPN Tunnel and it should work.
Please let me know after your test
Greetings
Mehdi
-
several hosts aaa server for authentication vpn
ASA5510 - 7.2 (1)
Using the following configuration, I try to have several radius servers configured for authentication backup in case of failure of the primary vpn. This seems to work ok. But once the main server upward when the asa will begin to use it again. The release of "aaa-Server 172.25.4.20 host" said
Server status: FAILURE, server disabled at 08:04:25.
How do reactivate you it?
RADIUS protocol AAA-server adauth
adauth AAA-server 172.25.4.20
key *.
authentication port 1812
accounting-port 1813
adauth AAA-server 172.25.4.40
key *.
authentication port 1812
accounting-port 1813
tunnel-group group general attributes
address pool pool
authentication-server-group adauth
by default-group-policy
You can add the option in the Group aaa-server:
"reactivation in timed mode.
This causes a dead server is added to the pool after 30 seconds.
The following link has some good info on the options available. I suggest looking for the doc for the "reactivation".
http://www.Cisco.com/univercd/CC/TD/doc/product/multisec/asa_sw/v_7_2/cmd_ref/crt_711.PDF
-Eric
Be sure to note all the useful messages.
-
Can access virtual servers, but not the server host after vpn
When on the network, I can access the host server and all other virtual servers (virtualized with virtualbox). But when I connect with VPN I have no access to the main server, but I have access to any of the host servers - and I can get access to the main server of one of the host servers.
Where do I start looking?
using of 5505 and asa version 8.4 is (2).
The nat setup is like this:
3 (inside) (outside) static source any any static destination NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 non-proxy-arp-search to itinerary
translate_hits = 0, untranslate_hits = 0
4 (inside) (outside) static source any any static destination NETWORK_OBJ_192.168.1.128_27 NETWORK_OBJ_192.168.1.128_27 non-proxy-arp-search to itinerary
translate_hits = 0, untranslate_hits = 0
5 (inside) (outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.254.0_28 NETWORK_OBJ_192.168.254.0_28 non-proxy-arp-search of route static destination
translate_hits = 37, untranslate_hits = 63771
6 (on the outside) to dynamic interface of the NET-VPNPOOL source (outdoor)
translate_hits = 0, untranslate_hits = 0
On the host, I see that you have 2 default gateways configured. It can have 1 default gateway, and to the other interface, you must configure static routes for specific access.
The interface that needs to connect to the Internet should have the configured default gateway. The traffic that pass through the interface of the SAA should also go in and out the same set of interface, IE: If the host server connects to the interface via dmz out to the external interface, the return traffic must also go through this path, apart from the interface and return to the dmz interface.
-
Hei guys,.
Please help me on this one because I'm stuck enough on her...
I am trying to connect to a Cisco 3700 router configured as a VPN server by using a VPN client and the VPN connection does not settle.
This is an extract from the log:
130 12:48:30.585 07/01/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports XAUTH
131 12:48:30.585 07/01/11 Sev = WARNING/3 IKE/0xE3000057
The HASH payload received cannot be verified
132 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300007E
Failed the hash check... may be configured with password invalid group.
133 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300009B
Impossible to authenticate peers (Navigator: 904)
134 12:48:30.600 07/01/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK INFO (NOTIFY: INVALID_HASH_INFO) for 200.100.50.173I enclose the whole journal extract... The message "BOLD" is quite obvious, you mean, but I'm 100% sure, in the login entry, I typed correctly the group password: pass
My topology is very basic, as I am setting this up only to get a clue of the operation of the Cisco VPN. It is built in GNS3:
-2 3700 routers: one of them holds the configuration of the VPN server and the other would be the ISP through which the remote worker would try to establish a VPN connection. I am also attaching the configuration file for the router configured as a VPN router.Behind the second router there is a virtual XP machine on which I have installed VPN client...
My connection entry in the customer is to have the following parameters:
Host: 200.100.50.173 , //which is the IP address of the VPNServer
Authentication-> authentication-> name group: grup1 password: pass / / I'm quite positive that I typed the correct password... even if the log messages are linked to a misidentification.I use public addresses only, because I noticed there is a question about behind the NAT VPN connections and is not not very familiar to the NAT.
Another aspect which can be of any importance is that "allow Tunneling of Transport" in the tab Transport to the input connection is disabled
and the VPNServer router logs the following error message when you try to establish the connection:
* 01:08:47.147 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.
* 01:08:47.151 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.You have no idea why I can't connect? Y at - it something wrong with my configuration of VPN server... or with the connection entry in the VPN client?
Thank you
Iulia
Depending on the configuration of the router, the group name is grup1 and the password is baby.
You also lack the ipsec processing game that you would need to apply to the dynamic map.
Here is an example configuration for your reference:
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080235197.shtml
Hope that helps.
-
Make the remote web server accessible via VPN Site to website
We have two test sites that are connected by a tunnel IPSEC VPN site-to-site (hosted on a SAA each site) over the Internet. We are trying to set up an environment to test two web applications running side by side. Two web servers are running on the Site of Test 1. We don't have the same public IP available at each site.
To address the public site 1 unique IP address restriction, we try to install ACL and NAT rules to have 2 Site accept traffic from the internet and send it on the site to the other tunnel. So 1 Web server would accept the ASA 1 internet traffic and Web Server 2 accept traffic from ASA 2 to the other site. Here's a network diagram:
We have difficulties to get this configuration works correctly. Please note that the network 192.168.3.0/24 clients are able to access the servers Web1 and Web2. This question seems to be due to our NAT configuration. This is the type of error, we see on the two firewalls:
Asymmetrical NAT rules matched for flows forward and backward; Connection for tcp src outside:4.4.4.4/443 dst outside:192.168.1.10/443 refused due to path failure reverse that of NAT
Our situation seems similar to this post: https://supportforums.cisco.com/thread/2242230
Any help would be appreciated.
Hello
What Karsten said above is true. While it is possible and works, it also means that the configuration is a little more complex to manage. I have done no such features in a real-life network environment and have always used additional public IP addresses on the local site when a server is hosted.
If you want to continue to move forward with this so here's a few points to consider and the configurations that you need.
First off it seems to me that the other server will be organized by the local Site 1 so a simple static PAT (Port Forward) must manage the Site 1.
network of the WEB-HTTP object
host 192.168.1.10
NAT (inside, outside) interface static tcp 443 443 service
And if you need TCP/80 also then you will need
network of the HTTPS WEB object
host 192.168.1.10
NAT (inside, outside) interface static service tcp 80 80
Now, 2 Site will naturally a little different that the server is hosted on the Site 1 and Site 2 is the public IP address used to publish the server on the external network.
Essentially, you will need to configure NAT that both makes dynamic PAT for the addresses of the source of the connection to your server Web 2, but also makes the static PAT (Port Forward) for the IP address of the Web Server 2. Additionally, you have to set the area of encryption on the Site 1 and Site 2 to match this new addition to the L2L VPN connection.
Unless of course you use an existing IP address on the field of encryption in the dynamic translation of PAT for the source address. In this case, it would take no change VPN L2L. I'll use that in the example below.
The NAT configuration might look like this
service object WWW
destination eq 80 tcp service
service object HTTPS
destination eq 443 tcp service
the object SOURCE-PAT-IP network
host 192.168.3.254
network of the WEB-SERVER-2-SITE1 object
host 192.168.1.11
NAT (outside, outside) 1 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service WWW WWW
NAT (outdoors, outdoor), 2 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service HTTPS HTTPS
So, essentially, NAT configurations above should ake 'all' traffic coming from behind 'outside' interface intended to "outside" "interface" IP address and translate the source to ' SOURCE-PAT-IP ' address and untranslate destination to "WEB-SERVER-2-SITE1".
Make sure that the IP address chosen (in this case 192.168.3.254) is not used on any device. If she is then replace it with something that is not currently used in the network. Otherwise, configure an IP address of some other subnet and include in the L2L VPN configurations on both sites.
Unless you already have it, you also have this configuration command to activate the traffic to make a U-turn/pin on the ' outside ' of the Site 2 ASA interface
permit same-security-traffic intra-interface
Hope this helps
Remember to mark a reply as the answer if it answered your question.
Feel free to ask more if necessary.
-Jouni
-
Customer remote cannot access the server LAN via VPN
Hi friends,
I'm a new palyer in ASA.
My business is small. We need to the LAN via VPN remote client access server.
I have an ASA5510 with version 7.0. I have configured remote access VPN and it can establish the tunnel with success. But I can not access the server.
Client VPN is 5.0.07.0290 version. Encrypted packages have increased but the decrypted packet is 0 in the VPN client statistics, after I connected successfully.
Next to the ASA, I show crypto ipsec sa, just deciphering the packets increase.
Who can help me?
Thank you very much.
The following configuration:
ASA Version 7.0(7)
!
hostname VPNhost
names
dns-guard
!
interface Ethernet0/0
nameif outside
security-level 10
ip address 221.122.96.51 255.255.255.240
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.42.199 255.255.255.0
!
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
!
ftp mode passive
dns domain-lookup inside
access-list PAT_acl extended permit ip 192.168.42.0 255.255.255.0 any
access-list allow_PING extended permit icmp any any inactive
access-list Internet extended permit ip host 221.122.96.51 any inactive
access-list VPN extended permit ip 192.168.42.0 255.255.255.0 192.168.43.0 255.255.255.0
access-list VPN extended permit ip 192.168.43.0 255.255.255.0 192.168.42.0 255.255.255.0
access-list CAPTURE extended permit ip host 192.168.43.10 host 192.168.42.251
access-list CAPTURE extended permit ip host 192.168.42.251 host 192.168.43.10
pager lines 24
mtu outside 1500
mtu inside 1500
ip local pool testpool 192.168.43.10-192.168.43.20arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list VPN
nat (inside) 1 access-list PAT_acl
route outside 0.0.0.0 0.0.0.0 221.122.96.49 10
username testuser password 123
aaa authentication ssh console LOCAL
aaa local authentication attempts max-fail 3no sysopt connection permit-ipsec
crypto ipsec transform-set FirstSet esp-des esp-md5-hmac
crypto dynamic-map dyn1 1 set transform-set FirstSet
crypto dynamic-map dyn1 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface outside
isakmp enable outside
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption des
isakmp policy 1 hash md5
isakmp policy 1 group 2
isakmp policy 1 lifetime 86400
isakmp nat-traversal 3600
tunnel-group testgroup type ipsec-ra
tunnel-group testgroup general-attributes
address-pool testpool
tunnel-group testgroup ipsec-attributes
pre-shared-key *
telnet timeout 5ssh timeout 10
console timeout 0: end
Topology as follows:
Hello
Configure the split for the VPN tunneling.
Create the access list that defines the network behind the ASA.
ciscoasa(config)#access-list Split_Tunnel_List remark The corporate network behind the ASA. ciscoasa(config)#access-list Split_Tunnel_List standard permit 10.0.1.0 255.255.255.0
Mode of configuration of group policy for the policy you want to change.
ciscoasa(config)#group-policy hillvalleyvpn attributes ciscoasa(config-group-policy)#
Specify the policy to split tunnel. In this case, the policy is tunnelspecified.
ciscoasa(config-group-policy)#split-tunnel-policy tunnelspecified
Specify the access tunnel split list. In this case, the list is Split_Tunnel_List.
ciscoasa(config-group-policy)#split-tunnel-network-list value Split_Tunnel_List
Type this command:
ciscoasa(config)#tunnel-group hillvalleyvpn general-attributes
Associate the group with the tunnel group policy
ciscoasa(config-tunnel-ipsec)# default-group-policy hillvalleyvpn
Leave the two configuration modes.
ciscoasa(config-group-policy)#exit ciscoasa(config)#exit ciscoasa#
Save configuration to non-volatile RAM (NVRAM) and press enter when you are prompted to specify the name of the source file.
Kind regards
Abhishek Purohit
CCIE-S-35269 -
DHCP server for debugging VPN clients
We are DHCP configuration to a DHCP server for SSLVPN customers on our ASA 8.2 running, and it does not work yet.
I set the DHCP server to the tunnel profile to use, set the scope of the network dhcp for the group - that seems to be all that is needed.
Currently, the problem is I'm having trouble finding debug commands that provide detailed information on what is happening with DHCP queries.
Debug only the DHCP-based controls seem to be:
DHCPC Client DHCP information
DHCPD dhcpd information, and
dhcprelay DHCP Relay informationI ' ve tried the client and relay debugs and I see is that the client is not giving an IP address valid. " 0.0.0.0/0.0.0.0
The DHCP server is not a request from this ASA for the network defined in the dhcp-network for the group scope, and we see nothing on the DHCP server in debugging results.
Any suggestions would be welcome.
Lynne
you will see a button like "marks" as answered
You can also sort the useful answers.
Concerning
Ashish
-
To connect to the box of ubuntu via VPN via a server
I have a ubuntu box connected to a SBS2003 server. A VPN tunnel to the SBS2003 server, I see each machine connected to the network - including the Ubuntu machine. However, when I try to access the files on the machine of Ubuntu, VPN, I can't make a connection with it. I don't have this problem when I connected directly to the network while in the office - I can see the Ubuntu box and access files on this computer. Any ideas?
Any help is appreciated.
Hello
I suggest you post the question in the forums and check them off below if it helps:
http://social.technet.Microsoft.com/forums/en-us/categories
It will be useful.
-
VPN concentrator to transmit user group information to the IAS server?
All,
the feeling that the answer will be no, but we have replaced our MS RAS server using a VPN 3030 using an IAS server for authentication on a Win2k3 domain. The question we have is that some people share files FCP with people from other groups. HIA just validates the user password and verifies that they are in a private network allowed virtual group, which is then allowing them access more than they should, is it all the same for the hub the information on an IAS to control server as well? If not, does anyone know how to check popular ID using the remote VPN access are in the right group to which they are connected?
Sorry I think I did the above clear as mud!
Do not know your question, but you can cause the IAS server to assign a group to a user by adding the attribute class to a specific IAS security policy. Add class = OU = groupname; (do not omit the semicolon) for the attributes RADIUS IAS policy against which a user will be auth, and this will have an impact to the 3030, which will assign them to the appropriate group.
I hope this helps.
-
Inside the server can't ping remote vpn client
My simple vpn client can accumulate the tunnel vpn with my Office ASA5510 success and my vpn client can ping the internal server. But my internal server cannot ping the remote vpn client. Even the firewall vpn client windows is disable.
1. in-house server can ping Internet through ASA.
2 internal server cannot ping vpn client.
3 Vpn client can ping the internal server.
Why interal Server ping vpn client? ASA only does support vpn in direction to go?
Thank you.
Hello
Enable inspect ICMP, this should work for you.
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the icmp
inspect the icmp errorinspect the icmp
To configure the ICMP inspection engine, use the command of icmp inspection in class configuration mode. Class configuration mode is accessible from policy map configuration mode.
inspect the icmp
HTH
Sandy
-
How to put all through traffic the easy vpn client VPN server
Hi people
I want to ask you, how to put all of the server the easy vpn client VPN traffic through.
I mean, I have a server vpn at home, and if I connect to the vpn from outside server, to be with an IP address of my home.
There is the configuration up to now. Where is the problem?
ROUTER1 #sh running-config
Building configuration...
Current configuration: 5744 bytes
!
! Last configuration change at 19:51:18 UTC Wed Sep 4 2013 by cska
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
ROUTER1 hostname
!
boot-start-marker
usbflash0:CVO boot-BOOT Setup. CFG
boot-end-marker
!
!
!
AAA new-model
!
!
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization ciscocp_vpn_group_ml_1 LAN
!
!
!
!
!
AAA - the id of the joint session
!
Service-module wlan-ap 0 autonomous bootimage
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-1604488384
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1604488384
revocation checking no
!
!
TP-self-signed-1604488384 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 04050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31363034 34383833 6174652D 3834301E 170 3133 30383239 31313539
32395A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36303434 65642D
38383338 3430819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100CD 57 F1436ED2 8D9E8B99 B6A76D45 FE56716D D99765A9 1722937C F5603F9F
528E27AF 87A24C3D 276FBA1C A5E7C580 CE99748E 39458C 74 862C 2870 16E29F75
7A7930E1 15FA5644 D7ECF257 BF46C470 A3A17AEB 7AB56194 68BFB803 144B7B10
D3722BDD D1FD5E99 8068B77D A1703059 9F0578C7 F7473811 0421490D 627F25C5
4 HAS 250203 010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355
551 2304 18301680 141B 1326 C111DF7F 9F4ED888 EFE2999A 4C50CDD8 06 12301
03551D0E 04160414 1B1326C1 11DF7F9F 4ED888EF E2999A4C 50CDD812 300 D 0609
2A 864886 04050003 81810096 BD0C2B16 799DB6EE E2C9B7C4 72FEAAAE F70D0101
FF87465C FB7C5248 CFA08E68 522EA08A 4B18BF15 488D D53D9A43 CB400B54 8006
CB21BDFB AA27DA9C C79310B6 BC594A7E D6EDF81D 0DB7D2C1 9EF7251B 19A 75403
211B1E6B 840FE226 48656E9F 67DB4A93 CE75045B A986F0AD 691EE188 7FB86D3F
E43934FA 3D62EC90 8F37590B 618B0C
quit smoking
IP source-route
!
!
!
!
CISCO dhcp IP pool
import all
network 192.168.1.0 255.255.255.0
DNS-server 195.34.133.21 212.186.211.21
default router 192.168.1.1
!
!
IP cef
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
license udi pid CISCO892W-AGN-E-K9 sn FCZ1530C209
!
!
username privilege 15 secret 5 cska $1$ $8j6G 2sMHqIxJX8MQU6vpr75gp1
!
!
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto VPNGR
vpngroup key
DNS 212.186.211.21 195.34.133.21
WINS 8.8.8.8
domain chello.at
pool SDM_POOL_1
ACL 120
netmask 255.255.255.0
ISAKMP crypto ciscocp-ike-profile-1 profile
match of group identity VPNGR
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
security association idle time 86400 value
game of transformation-ESP-3DES-SHA
set of isakmp - profile ciscocp-ike-profile-1
!
!
Bridge IRB
!
!
!
!
interface Loopback0
192.168.4.1 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
interface BRI0
no ip address
encapsulation hdlc
Shutdown
Multidrop ISDN endpoint
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
FastEthernet6 interface
!
interface FastEthernet7
!
interface FastEthernet8
no ip address
Shutdown
automatic duplex
automatic speed
!
type of interface virtual-Template1 tunnel
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
interface GigabitEthernet0
Description Internet
0023.5a03.b6a5 Mac address
customer_id GigabitEthernet0 dhcp IP address
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
!
wlan-ap0 interface
description of the Service interface module to manage the embedded AP
192.168.9.2 IP address 255.255.255.0
ARP timeout 0
!
interface GigabitEthernet0 Wlan
Description interface connecting to the AP the switch embedded internal
!
interface Vlan1
no ip address
Bridge-Group 1
Bridge-Group 1 covering-disabled people
!
interface BVI1
IP 192.168.1.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
local IP SDM_POOL_1 192.168.4.3 pool 192.168.4.245
IP forward-Protocol ND
!
!
IP http server
local IP http authentication
IP http secure server
overload of IP nat inside source list 110 interface GigabitEthernet0
IP nat inside source static tcp 192.168.1.5 3389 interface GigabitEthernet0 3389
IP nat inside source static udp 192.168.1.5 3389 interface GigabitEthernet0 3389
IP nat inside source static tcp 192.168.1.5 21 interface GigabitEthernet0 21
IP nat inside source static udp 192.168.1.5 21 interface GigabitEthernet0 21
IP nat inside source static tcp 192.168.1.4 3389 interface GigabitEthernet0 3390
IP nat inside source static udp 192.168.1.4 3389 interface GigabitEthernet0 3390
overload of IP nat inside source list 120 interface GigabitEthernet0
IP route 0.0.0.0 0.0.0.0 dhcp
!
exploitation forest esm config
access list 101 ip allow a whole
access-list 110 permit ip 192.168.1.0 0.0.0.255 any
access list 111 permit tcp any any eq 3389
access-list 120 allow ip 192.168.4.0 0.0.0.255 any
!
!
!
!
!
!
!
control plan
!
Bridge Protocol ieee 1
1 channel ip bridge
!
Line con 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
transport output pad rlogin udptn ssh telnet
line to 0
line vty 0 4
privilege level 15
preferred transport ssh
entry ssh transport
transportation out all
!
Thanks in advance
To do this you must make the following changes:
(1) disable split Tunneling by deleting the ACL of your configuration of the client group.
(2) enable NAT for VPN traffic by adding 'ip nat inside' to your virtual model of the client network to the ACL that controls your PAT.Edit: Theses are the changes to your config (also with a little cleaning):
Configuration group customer isakmp crypto VPNGR
No 120 LCD
!
type of interface virtual-Template1 tunnel
IP nat inside
!
no nat ip inside the source list 120 interface GigabitEthernet0 overload
!
access-list 110 permit ip 192.168.4.0 0.0.0.255 any
no access-list 120 allow ip 192.168.4.0 0.0.0.255 any
Sent by Cisco Support technique iPad App
Maybe you are looking for
-
CQ60-210US: coprocessor drivers are not installed Code 28 Compaq CQ60-210US
I rebooted just this computer last night and in the properties of the device, I have a coprocessor under other devices, which is not installed correctly with a code 28. I tried to manually install the drivers to search the whole computer.
-
Everything on my screen blurs to the right
Everything on my computer blurs a little to the right, as a hail/light shade. Word document, to tabs on my computer, to the use of the internet. Why is this and how do I solve this problem? I tried to hit the button at the bottom to reset the options
-
Ray vs GANYMEDE +.
Greetings- I see implicit comments about a difference in architecture between how RADIUS seen NAS vs how GANYMEDE +. Is there someone who is intimately familiar with the call flow of each protocol that can comment on how it is different? Is there a d
-
Crossing call - 403 forbidden problem
Hello We deployed the VCS control with VCS Expressway for the course of firewall and encountered a problem. It says on the status of the call VCSe, 403 forbidden When an external end point registered as SIP on the VCSe will call to an internal endpoi
-
I just downloaded PSE14 and the Organizer does not recognize my Nikon D750 when I try to import