Server files using user in DIAdem properties

Similar Questions

• Mac Mini server files for users of 50 +.

  Hello

  Our current file server is the last of the Xserve running 10.6.8.  It's getting up there and if it's the toasted bread, so I am. If I get nervous.

  I waited for a refreshment HW of Deputies and Minis, but none have been forthcoming and I don't see even in Active rumors about them. If Apple decided professional users can take a flying leap which will suck because I'm already doing a HyperV Windows 2012 nightmare and I want more. But I digress...

  Anyone used later (also older than it is) makes Mac Mini with a Promise RAID as a file server for users of more than a dozen? We have a staff of 50 more or less, more use as a store of files for our portal and web server (each on a machine separate with mounted shares) of CrushFTP file sharing.  I would like to know popular experience actually using a Mini to serve that many users and if the aggregation of links to one of the thunderbolt with ethernet port ports actually works.

  Anyone done this? How is the performance?

  Thank you

  Jeff

  Not many users, but one of my clients is written four or five DTV full-HD video streams in couple of tables Promise Pegasus configured RAID-6, and the berries barely noticed the load.   This along with the generation previous Mac Mini.   The limit you will probably hit here, it's how much you can stuff through the Gigabit Ethernet, which probably means using a bolt of lightning for the Ethernet card or two - the bottleneck will be on the LAN side.  But I suspect that you will have to prototype your load in all cases.

• I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost.

  original title: robocopy

  I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost. So far, that's what I did, I used \\server1\share \\server2\share/sec /mir robocopy and robocopy \\server1\share \\serve2\share/e/s /copyall. It seams like they copied all files with the permissions of the user for the files, but not files. For example, if a user makes a folder with the files in the folder appear them have permissions appropriate for them but not the root folder or subfolders, they did... How can I fix this and what is the difference between / s /mir and/e/s /copyall?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How can I run a search to find all PST files used in the disks Home users?

  Hello

  I need to know how to run a search for my server files (windows Server 2003) to find all the PST files that are located in a disk of home users - including subfolders

  However I need research to tell me what PST files are in use. (active)

  Is anyone able to help me with this?

  Hi Gonz1981,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is linked to the search server .pst files. Appropriate in instances of Windows Server.

  Please post your question in the Forums of Windows Server.

• I don't see States USERS\PUBLIC file folder is empty but properties States there are subfolders and files

  I had to remove some users on the computer, now, I do not see the files in Users\public. States of Explorer folder is empty but clists them properties. also, if I search for them as they appear on the results but I can't access it then.

  Hi David Lister,

  1. What account you're connected to?

  2. what happens when you try to access the folder using a different account?

  3. you receive messages or error codes when access you the folder?

  You can try to use the administrator account and try to access the folder.

  You can also try to restore the file to the previous version and check if it helps:

  Try to restore the files from previous versions.

  a. open the computer by clicking the Start button, click computer.

  b. navigate to the User\Public folder, right click and then click on restore previous versions.

  c. you will see a list of the available versions of previous of the file or folder.

  For more information, you can consult the following article:

  Previous versions of files: frequently asked questions

  Hope this information is useful.

• How FTP a file from the client computer to the server database using Forms 10 g

  Hello
  I want a file from a client computer to the database server computer using Forms 10 G (or PL/SQL) via ftp.
  could you please tell me how can I do this
  
  Concerning

  Hello

  I gave u the adequate instructions on webutil configuration but u did not comply with it.
  I will post again please read correctly and follow it.

  How to get running with WebUtil 1.06 included with Oracle Developer Suite 10.1.2.0.2 on a win32 platform
  Solution
  Assuming a new 'Complete' installation of Oracle Developer Suite 10.1.2.0.2,
  Here are the steps to get a shape of small test running, using WebUtil 1.06.

  Note: Oracle_Home is used as an alias for your real oDS ORACLE_HOME.
  Feel free to copy this note to a text editor and do a find/replace on
  Oracle_Home with your real value (no slash). Then, it is easy to
  copy and paste the actual orders to be run from the copy of the memo.

  (* 1) * download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
  and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.

  (* 2) * copy or move jacob.jar and jacob.dll
  C:\webutile is the folder where you extracted Jacob and ends in ...\jacob_18
  CD C:\webutile
  Copy jacob.jar Oracle_Home\forms\java\.
  Copy jacob.dll Oracle_Home\forms\webutil\.
  Staging of Jacob is no longer needed and can be deleted.

  (* 3) * sign frmwebutil.jar and jacob.jar
  Open a DOS command prompt.
  Add Oracle_Home\jdk\bin in the path:
  set PATH=Oracle_Home\jdk\bin;%PATH%
  Sign files and check the result of success:
  Oracle_Home\forms\webutil\sign_webutil Oracle_Home\forms\java\frmwebutil.jar
  Oracle_Home\forms\webutil\sign_webutil Oracle_Home\forms\java\jacob.jar

  (* 4) * If you already have a pattern in your RDBMS that contains stored WebUtil code,.
  You can skip this step. Otherwise,.
  Create a schema for the stored code WebUtil and privileges to
  Sign in and create a stored package. Name of the schema "WEBUTIL" is recommended
  for no reason other than consistency based on users.
  Open Oracle_Home\forms\create_webutil_db.sql in a text editor and remove or comment
  the declaration of EXIT, in order to see if the objects have been created witout
  errors.
  Launch SQL * more like SYSTEM and the issue:
  Webutil IDENTIFIED BY password CREATE a USER
  DEFAULT TABLESPACE users
  TEMPORARY TABLESPACE temp;
  /
  GRANT CONNECT, CREATE PROCEDURE, CREATE SYNONYM TO webutil PUBLIC;
  /

  CONNECT webutil/webutil@rcci
  @Oracle_Home\forms\create_webutil_db.sql
  -Inspect SQL * Plus output for errors, and then
  CREATE a PUBLIC SYNONYM webutil_db FOR webutil.webutil_db;
  /

  Reconnect as SYSTEM and the question:
  Grant execute on webutil_db to public;

  /

  (* 5) * Edit Oracle_Home\forms\server\default.env and add Oracle_Home\jdk\jre\lib\rt.jar
  to the CLASSPATH entry.

  (* 6) * add edit Oracle_Home\forms\server\formsweb.cfg default insde:
  archive_jini = frmall_jinit.jar, frmwebutil.jar, Jacob.jar
  Archive = frmall.jar
  also add:
  webutil
  WebUtilLogging = off
  WebUtilLoggingDetail = normal
  WebUtilErrorMode = alert
  WebUtilDispatchMonitorInterval = 5
  WebUtilTrustInternal = true
  WebUtilMaxTransferSize = 16384
  baseHTMLjinitiator = webutiljini.htm
  baseHTMLjpi = webutiljpi.htm
  baseHTML = webutilbase.htm
  archive_jini = frmall_jinit.jar
  WebUtilArchive = frmwebutil.jar, jacob.jar, f90all.jar
  Archive = frmwebutil.jar, f90all.jar
  lookAndFeel = oracle

  (* 7) * Oracle_Home\forms\server\webutil.cfg edit and add:
  Transfer.Database.Enabled = True
  Transfer.appsrv.Enabled = True

  (* 8) * start the OC4J instance

  (* 9) * start Forms Builder and connect to a schema in the RDBMS used in step (4).
  Webutil.PLL open, make a 'compile ALL' (shift-control-K) and generate PLX (Ctrl-T).
  It is important to generate the PLX, in order to avoid the FRM-40039 indicated in Note 303682.1
  If the PLX is not generated, the library Webutil.pll must be fixed with
  path information full access to all who wish to make use of WebUtil. This is NOT recommended.

  (* 10) * create a new WBF.
  Open Webutil.olb and subclass (not copy) the Webutil opposes the shape.
  There is no need to subclass the WebutilConfig object.
  Attach the Webutil.pll library and remove the path.
  Add a logon trigger IT with code
  NULL;
  to avoid having to connect to a RDBMS (optional).
  Create a new button on a new canvas, with the code
  show_webutil_information (TRUE);
  in a trigger WHEN BUTTON PRESSED.
  Compile the FMB to FMX, after doing a compilation-All (shift-control-K).

  (* 11) * under Edit-> preferences-> Runtime in the form designer, click the "Reset to Default" If
  the "Application Server URL" is empty.
  Then add '? config = webutil' at the end, if you end up with a URL of the form
  : http://application-tier server: port/forms/frmservlet? config = webutil

  (* 12) * run your form

  Note: If you want to use Jacob and you can configure jacob too, if you follow the above mentioned instructions.
  Sarah

• Use Peoplesoft 8 for our accounting systems and when I go to open a doc (tiff on a shared server file) link, it says that I am not authorized to view the page.

  Use Peoplesoft 8 and when I go to open a doc (tiff on a shared server file) link, it says that I am not authorized to view the page.

  You authenticate (log in) to access this TIFF file?

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  I am the Director of technical support for more than 1000 computers. Recently in some computers (windows based) users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  Hi MASPAdministrator,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• When I save a file (using "Save as" in Firefox) on the desktop the address bar reads: file:///C:/Users/Name/Desktop...

  ORIGINAL TITLE: File evil

  When I save a file (using "Save as" in Firefox) on the Office the address bar reads: file:///C:/Users/Name/Desktop...how can I fix it?

  Hi Goldie,

  1. not the problem only occurs when you save the file in Firefox?
  2. don't you make changes to the computer before the show?

  I suggest you try to save the file using Internet Explorer on the desktop and see if it works.

  If the problem is with the shortcut of Firefox, then I suggest you to post.
  https://support.Mozilla.org/en-us/questions

• I'm trying to timestamp (RFC 3161) a pdf file using my own timestamp server equipment but still get an error: 'invalid certificate for use.

  I'm trying to timestamp (RFC 3161) a pdf file using my own timestamp server equipment but still get an error: 'Invalid certificate for use' (text Original - certificado valido para uso e nao pt_BR:O). How can I get more information on what I'm missing or whats wrong with the certificate?

  I found the answer to my problem: it was linked to the plug of the TSA and its attribute 'Extended Key use '.

  In any case, thanks for your help. Just to answer the questions:

  Version: Adobe Reader XI

  Tried both:

  (A) the time stamp for the signature: signature put under without timestamp and an alert

  (B) the document timestamp: no changes and an alert

• How to register ActiveX exe server for all users

  Hello

  I'm aware that with newer versions of the CVI and Windows when you generate an ActiveX exe server, it records only the server for the user profile.  I read one white papers OR who said that computer administrator may register the server for all users.  I am an administrator for the development of PC we use.  I went to the command and he ran as the administrator of the PC.  I then navigate to the path of the exe.  I published the regserver command.  Unfortunately, I am unable to distinguish if the server exe was registered for all users or if it combined again to my user profile.  Our server exe is called by another program of the CVI.  To validate if the server exe had been registered for all users, I had a user who had not built server exe on the development PC connection and try to start the server within its own CVI program exe.  When this has been attempted, the user receives an error "class not registered".  The user was not able to successfully launch the exe of the server until it has built on the PC itself.  It does not appear that the administrator regserver command worked to save the exe file of the server for all users.  Is anyone aware of any steps that I may have missed?

  I'm working on a Windows 7 with Service Pack 2 for LabWindows/CVI 2013.

  Thanks in advance.

  You will probably have to use Google.

  http://social.msdn.Microsoft.com/forums/en-us/0022ca21-CAA2-4be5-b519-757ff9daf7fb/how-to-register-3...

  or maybe http://social.msdn.microsoft.com/Forums/vstudio/en-US/4fb96971-53a1-4e25-bc75-b49cfaf4d574/problems-...

• Cannot ping server to use a server-based application

  I have a computer of workers, if I go to my network places, I can access the server.  If I ping the server by IP address, it pings fine.  However if I ping by host name, it pings somewhere else.  Here is a direct link with the ping command.

  http://i301.Photobucket.com/albums/nn78/Peeps38/nkellysping.jpg

  I uninstalled and reinstalled the application that resides on the server in question, and I can also access all the files that are shared from the server.  Unable to ping the server, this is what prevents the application from running correctly.   I checked and rechecked all potential firewall which may run (norton and windows are the only two i found and both have been disabled)

  My first thought was to force recognition of the ip address in the host file.  the host file looks like this:

  # Copyright (c) 1993-1999 Microsoft Corp.
  #
  # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
  #
  # This file contains the mappings of IP addresses to host names. Each
  # entry should be kept on an individual line. The IP address must
  # be placed in the first column, followed by the corresponding host name.
  # The IP address and the host name should be separated by at least one
  space #.
  #
  # In addition, comments (such as these) may be inserted on individual
  # lines or following the name of the machine indicated by a symbol "#".
  #
  # For example:
  #
  # 102.54.94.97 rhino.acme.com # source server
  # 38.25.63.10 x.acme.com # x client host

  127.0.0.1 localhost
  10.1.10.11 Televantage
  10.1.10.10 eserver

  the 10.1.10.11 is the server problem and it does not resolve when the name ping.

  I am at a total loss, because there are two other computers not 6 feet from the problem pc and they work perfectly well.

  any thoughts or ideas would be greatly appreciated

  Thank you

  Jerry

  This smells like a DNS suffix search list situation.  Whenever a TCP/IP non - Fully Qualified Domain Name (FQDN) non - is registered (i.e. a name without a dot (.) in it) the DNS will seize the suffixes in a list and try them all out first.  This list can be found through a command window and typing the command:
  ipconfig/all
  and you will see marked lines "DNS suffix search list.  It appears as "epeopleamerica.com" is one of the entries in this list.

  Alternatively, if you go into the control panel network and made a right click your network connection and select 'Properties' and then double-click "TCP/IP" entry in the Middle window (maybe to scroll down) then click on "Advanced", then click the "DNS" tab there will be two checkboxes labeled "Append primary and connection suffixes DNS specific to the ' and 'add these DNS suffixes '.  To avoid this, click on the 'Add these DNS suffixes' box and remove all of the entries in the box below.

  Yet another approach would be to make your domain name FULL-not qualified by putting an end to a period.  So instead of:
  Ping Televantage
  Try:
  Ping Televantage.
  Then he would not add suffixes to the name when the name resolution.

  See you in 'My Network Places' because he is using NetBT broadcasts (Microsoft Networking) which is a different protocol of the TCP/IP line that uses "ping". (Different rules are in place to resolve the names of these two protocols).

  HTH,
  JW

• OS + resolution of detection and serve files

  I want to write a javascript code that detects the os & serves files based on that css & js. E.g.

  detect the os
  If os - 5
  meet os5framework.js
  meet os5dbconn.js
  If resolution< 320,="" serve="">
  Resolution > 320 but if< 480,="" serve="">
  If resolution > = 640, serve os5 - 640.css

  How can I detect the operating system & serve files based on this information?
  Response

  If we are talking about content running in the browser, you can use the HTTP User-Agent header to retrieve the version of the software, hardware device and model number.  More info here:

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/how-to-detect-the-BlackBerry-BRO...

  However if you build a WebWorks application, you can use the blackberry.system API to get the model and software version.  More info here:

  https://bdsc.webapps.BlackBerry.com/HTML5/APIs/BlackBerry.System.html

• Generate class files using the WSDL url and wsimport

  I am trying to create a java application that hits the service exposed by hub.

  To create the application in java, I'm generating class files using the WSDL that is created and exposed by the hub.

  Executed steps:

  1 created an application in OPA.

  2. deployed on the hub (usinf deploy option of snapshot on Policy Modeling)

  3. in the deployment tab, I see the request and get the url of the wsdl by clicking on it.

  I try on this wsdl wsimport command. But it gives me following error messages.

  ---------------------------------------------------------------------------------------------------

  C:\***\AllFiles > wsimport http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL

  the analysis of WSDL...

  [ERROR] invalid WSDL http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL , expected {http://schemas.xmlsoap.org/wsdl/} html (line 2) data definitions

  Cannot read the WSDL document: ( http://localhost:7001/Hub/determinations-Server/assess/SOAP/Generic/12.2/AttemptOne?WSDL , because 1) did not find the document. (/ 2) the document could not be read. (3) the element the document root is not < wsdl:definitions >.

  [ERROR] WSDL:service is not found in the WSDL (s) provided:

  At least a WSDL with definition of at least one service must be provided.

  Unable to parse the WSDL file.

  ---------------------------------------------------------------------------------------------------

  If I store the wsdl file in a file on my local computer, and then run wsimport, it generates the classes very well.

  Can someone provide me with a way that I can generate the classes using the wsdl url and not the local file?

  Also, do I need to create a connection in the Connections tab on the hub?

  Thanks in advance.

  -Alain

  Looks like you could run in the user authentication when wsimport runs against the WSDL. Instead of the WSDL, its reception, the login page.

  The best way to work around this problem is perhaps what you do already - to obtain the wsdl and save them in a file.

  Another solution is to disable the restriction of connection to the Web Service API. You can do this in the menu on the users page (admin role can turn on and off.

  You can switch between a user and a password with the call of the WSDL file, but I don't know if its possible to do with wsimport

  See you soon

  Frank

• AlreadyLockedException: Cannot lock the file, another user holds the lock

  I created the client application to web service using Jdeveloper 11.1.1.7 and deployed on weblogic 10.3.6 on cluster consists of 3 servers. The task of the application is to extract the data from the DB and push application external server permanently. Everything seems fine and works applications. The problem is with some message logs on all three servers.

  I see the following stack of servers:

  oracle.jbo.AlreadyLockedException: Houston-26030: unable to lock the file, another user owns the lock. [[

  at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1105)

  at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:567)

  at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:8589)

  at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:6237)

  at oracle.jbo.server.EntityImpl.beforePost(EntityImpl.java:6756)

  at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6943)

  at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3301)

  at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3106)

  at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2108)

  at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2389)

  ........

  It is clearly stated that another process locks the record while the current process tries to lock the record even. Yet once obvious to say that the same application is deployed on three different servers (i.e. on the cluster) and each application tries to do the same task at the same time in each of the three servers with cluster.

  Question: It is healthy to ignore this error? or I have to solve out?

  I also checked this blog (Andrejus Baranovskis Blog: optimistic and pessimistic locking in Oracle ADF BC) he explains the difference between locking type available in the application model (optimistic and pessimistic). Will I change the lock mode in the request form for the client application that is mentioned to be optimistic rather than pessimistic? This will solve the problem? Is it OK to do with the behavior of the application who explained.

  I thought about this a bit more and would not use temporary tables. Because the ADF does not guarantee that a session database is still used by the same am it will be difficult to control.

  You can use a column in the table itself to write, for example, the name server that will manage the data before doing the real work.

  Our you will find further information in the table that allows you to balance the work using this in a query. Sample would be a column id that allows you to select only the tires where the modulo 3 id is equal to 0, 1, or 2. In this way, it would be pointless to write something on the table before proposing the line as each server would see only the lines it is supposed to work.

  Timo