Service of wsm - am OBIEE (AdminServer) was able to start

Similar Questions

• I used administrative services to change my share on automatic. I have applied these changes and click Start. I had a dependency service 1068 error message or group was able to start.

  I use Bell Fibe 25

  My computor is running on the windows xp proffesional 64

  Also don't see xbox 360 image in the area of media sharing in windows media player

  ????

  Hi DougGowers,

  Follow the suggestions below for a possible solution:

  Method 1:  When the "Error 1068" error is logged, view the dependencies for administrative services tab to ensure that the services that rely on administrative services are not stopped. To view the Dependencies tab, follow these steps:

  a. click Start, click run, type services.mscand click OK.

  b. right-click on administrative service you wish to view and then click Properties.

  c. click the dependencies tab.

  If the service that depends on the Administrative function is stopped, right-click the service in the Services console, and then click Start. Then, try again changing administrative service.

  Method 2:  Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Start and click run, then type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  For more information, see the article:

   

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  You can also see the following articles for more information on sharing media with Windows Media Player:

  Share your multimedia files

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/share-media

   

  Listen to music from your computer to Xbox 360

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/stream-Xbox

  Let us know if that helps.

• service or group of addiction was able to start; Cannot start the diagnostic policy service

  I have windows vista Home premium. I did have a problem connecting to internet before. So today, I can't connect to my router, either by wireless or ethernet.  The router is fine, because my roommates are able to connect.  The signal is also excellent, but my computer is "connected with limited access".   The message I get is: 'unknown connection status. The dependency service or group was able to start. "" When I click on diagnose and repair, it says Network Diagnostics cannot run because the Diagnostics Policy Service is not running "then it gives me the option to open the Service Control Manager to manually start the diagnostic policy Service.  This opens a window of Services with a huge list of things I don't understand.  I searched for solutions to the problem, and none have worked.  Any advice greatly appreciated.

  Hello, Lesley

  Thank you for using the Microsoft answers Forum!

  The following information is taken from: http://support.microsoft.com/kb/943996

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk!

  It is possible that the permissions on a specific registry key has changed. You can try to correct this by clicking on start, type regedit in the prompt, do a right click the program regedit and select run as administrator. In the registry editor, click the arrow to expand the selection, go to HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Services, DPS, on the right, click settings and click Permissions.  In the permissions screen, select the user TrustedInstaller . If you do not see the TrustedInstaller user, click Add, type NT TrustedInstaller service and press OK. If make sure that permissions full control and read are checked for the TrustedInstaller user.

  Let us know if that helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "dependency service or group was able to start.

  I have a laptop with vista. my wireless connection is explained by limited access internet and the icon in the launch area shows "dependency service or group was able to start.  I have internet, so I don't know what that means.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-the-dependency-service-or-group-failed/2f8fb4c8-26f1-48E0-BC7F-7b0fa631fd26

  It will be useful.

• The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start.

  the dependency of the orgroup faaied to start service unknown Internet connection.

  The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start. I tried all the suggestions on this page. Can't even find the virus that the internet not connected. My livebox is grateful for the laptop please help

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Is the question only for the icon network did you try to open a Web page and check?

  ·         What suggestions do you have tried?

  ·         What is the exact error message?

  ·         Have you tried all the steps from the link?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/connection-status-unknown-the-dependency-service/92203623-b6d5-4301-8c79-00210abbcdd4

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/943996

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2:

  If the previous step fails, follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/936211

  Method 3:

  If the previous step fails, reset WinSock and check if the problem persists:

  http://support.Microsoft.com/kb/811259

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 4:

  Temporarily disable the norton software (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

  Note: make sure that you enable the antivirus software, other security and firewall programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• When you try to share my internet connection via AD HOC I get this error: "an error occurred while internet connection sharing was being enabled. the dependency service or group was able to start. »

  original title: cannot share internet

  I shared my internet via ad-hoc, using my wifi in my laptop running vista 64-bit. It just stoped working and now I get a message saying

  "an error occurred while internet connection sharing was being enabled.   the dependency service or group was able to start. »

  Hello

  You can view the article in the Microsoft Knowledge base and check if it helps.

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Let us know if you need more assistance.

• Error message: unknown connection state. The dependency service or group was able to start.

  I installed Office 2010 on my computer with Vista and now can't connect via cable or wireless.  I get the error message: unknown connection status. The dependency service or group was able to start.  I know that the router and the wireless work.  I tried several of the mentioned patches, but nothing has worked.  My Verizon card works.

  Hello Chelen,

  I suggest you visit this Microsoft TechNet thread where they discuss the same problem you are having:
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/fb551ba5-327F-4265-8764-ea201331afb4/
  This response may be useful:
  "I also had the same problem and the solution above does not work.

  My problem was caused by corruption in the TCP/IP stack

  To fix, you need to run a command as administrator prompt

  Start > all programs > Accessories > prompt (right click and run as administrator)

  At the command prompt, type: netsh winsock reset

  "Ignore all errors, restart and voila'.

• Connection status: unknown. The dependency service or group was able to start.

  Greetings!  I have a year old Dell Inspiron.  Everything worked fine last night, but when I woke today I couldn't connect to the internet.  When I put the cursor on the network icon, it says "connection status: unknown."  The dependency service or group was able to start. "My Windows Firewall is also disabled and I can't activate it automatically or manually.  In addition, the Windows Diagnostic tool cannot be turned on, and whenever I try to activate the Diagnostic Policy Service it also can not be done. It says "error 5: access is denied" when I try to turn it on manually.

  My antivirus (Avira) software is fully up to date from last night.  I even took it into Best Buy and they did a diagnostic test to ensure that a virus is not the cause.  The guy there said it was a software problem.  I tried resetting TCP/IP (netsh winsock reset) without success.  I also tried sfc/scannow in safe mode and windows without success.  Are there other options?

  Thanks in advance.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• When you try to share my internet wireless connection I get this errordependency service or group was able to start

  When I try to share my internet connection, I get the following error. dependency service or group was able to start

  Hi Jason,

  1. What is the brand and model of the computer network adapter?

  2. How did you try to share the internet connection?

  Maybe not all services that run the Internet (ICS) ICS are enabled. I suggest you make sure that the slot addiction services are enabled.

  a. Click Start, select run, type services.msc and click OK.

  b. to activate a service, look for it in the right pane, double-click its entry.

  c. do not forget its Startup Type is set to automatic, and then click OK.

  All the following services must be so configured to use ICS:

  Application Layer Gateway Service
  Network connections
  Knowledge of the network (NLA) locations
  Plug-And-Play
  Remote Access Auto Connection Manager
  Remote Access Connection Manager
  Remote procedure call (RPC)
  Telephony

  After checking and automatic startup for each of these services configuration, close the Services window and restart the computer before trying again to enable ICS.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Spooler printer error 1068: dependency or group Service was able to start

  Original title: Error 1068

  I had this problem with error 1068"the dependency service or group could start.

  Background - I tried to add a printer that is installed on another PC on the network. When I clicked on add a printer, I get the message. "Windows can't open add printer." The local print spooler service is not running. : rental restart the spooler or restart the machine. "Restart the PC has not resolved it so I did a little research and it said to go to"administrative tools then 'Services' then 'print spooler'. " "I did and when I click on start it flashes a message"Windows is trying to start the service on the local computer"then immediately puts the message 'Windows is unable to start the Service on the local computer print spooler' error 1068: dependency or group Service was able to start.

  I tried to do a restore to many dates with no luck at all.

  I tried to install the printer directly to the computer... no luck when I went to install the drivers on the CD, I'll even "Windows can't open add printer." The local print spooler service is not running. : rental restart the spooler or restart the machine. "message.

  2 local PC repair shops have no idea which will resolve...

  Any help will be appreciated operating system is Windows 7 Premium Home edition is installed on an Acer Aspire.

  In the default installation, the values must be RPCSS and http. However, it works fine even without http as a dependency. I guess that the http driver is the problem (not start) in your PC, and elimination of the dependence of spooler should do the trick.

• [Windows 8.1] Limited Internet access + the dependency service or group was able to start the PROBLEM.

  So I have this problem for a long time . I can connect to the internet, but it says limited. It works perfectly fine but the computer says that I am not connected.  I don't know what are the causes that. Troubleshootin g can't find any problems. Also when I go to network and sharing Center , he said:

  Unknown

  The dependency service or group was able to start.

  Thank you: D-Patrick

  Please run a check of system files (SFC) & DISM if you're on win 7 or higher 
  
  
  All instructions are in our Wiki article below... If you have any questions please ask us.
  Check the file system (CFS) analysis and repair system files & DISM to fix things SFC cannot

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance

• WLan AutoConfig was able to start with the error 193:0xc1

  Former title: error 193:0xc1

  My wireless does not connect because it says that the WLan service failed to start.

  I went to the computer > manage > services > WLan AutoConfig. It has been set to automatic but it was empty when he should have said start. When I tried to start it I got the message service was able to start and the error in the title.

  I opened the dependencies in order to check if that was the problem and each of them have begun. So, it seems that the error is always in WLan AutoConfig.

  I tried the system restore (this problem just started today) to an earlier point, last week. It sticks on the system restore is initializing an hour +. I tried several restore points, but it always gets stuck on initialization.

  I looked at similar questions and I did everything recommended in people, but it seems that the answers stop without the original poster saying that they got it to work or not.

  Hello
   
  
  Step 1.
  Follow the steps below and check if the problem is resolved:
  a. Click Start, and then click computer.
  b. go on the system disk, where the operating system is installed (usually drive C :).
  c. find the program file.
  d. remove this file and restart the computer and check if you are able to start the service.
  Note: If you don't see the program file check if the file is hidden. Clickhere to find out how to show hidden files.
   
   
  Step 2.
  If the steps above to solve the problem I highly recommend to run a Virus Scan online.
   
  Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
   
  b. run the malware removal tool from Microsoft.
   
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
   
  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
   
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Failed to connect to the ESSBASE server & opmn was able to start

  Dear all,

  I couldn't connect to Essbase server and a service to opmn works not as well. Hard at this issue not accessible planning application, kindly help us this is very urgent and very crucial for us.

  Here are the controls and exit (Please find logs attached):

  The message is EASconsole below:

  ========================

  Error: 103: unexpected error Essbase 1030818

  Error: 1042006: error network [10061]: unable to connect to [XXXXXXXXXX.

  1. DS.
  2. XXXXXXXXXX.

  [local: 1423]

  Error: 1030818: failed to connect. Please check if the server and port are correct. If you receive timeout or handshake failure, please check if you have tried to connect to secure the port without keyword secure or disable the port with the secure key word.

  Of MAXL:

  ========

  Essbase MaxL Shell 64 bit - version 11.1.2 (ESB11.1.2.4.000B193)

  Copyright (c) 2000, 2015, Oracle and/or its affiliates.

  All rights reserved.

  MAXL > connection;

  Enter the user name > admin

  Enter the password > *.

  Enter the host > XXXXXXXXXX

  ""

  ERROR - 103 - Essbase unexpected error 1030818.

  Error - 1042006 - network [10061]: unable to connect to [XXXXXXXXXX.d

  1. s.XXXXXXXXXX.local:1423].

  ERROR - 1030818 - login failed. Please check if the server and port are correct.

  If you receive timeout or handshake failure, please check if you have tried a bitch

  CT to secure without keyword secure or clear with the keyword secure port...

  MAXL >

  Cmd prompt try everything to start opmn below is the message:

  ======================================

  Microsoft Windows [Version 6.1.7601]

  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C:\Users\hyptstadmingdc > cd C:\Oracle\Middleware\user_projects\epmsystem1\bin

  C:\Oracle\Middleware\user_projects\epmsystem1\bin > opmnctl status

  opmnctl status: opmn is not running.

  C:\Oracle\Middleware\user_projects\epmsystem1\bin > opmnctl startall

  opmnctl startall: from opmn and managed all process...

  opmnctl startall: opmn was able to start.

  C:\Oracle\Middleware\user_projects\epmsystem1\bin >

  

  Hi all

  Problem was solved after reinstall & reconfig (without uninstalling) box-2, after that I could use planning an application as usual without error.

  Kind regards

• 'Circular session context Logger Kernal' was able to start with the following error: 0xC0000035

  I hope it helps someone as it has been a persistent problem for some time at least six months. I did the research almost as long and also a solution for this, but I'm done here as a last resort. My question to had is that I believe that this occurs at the start of most of the time with the system, but can occur later also is originally the system will block also up and we have four other systems here that this was never a problem at all. I'm still looking and I hope to find an answer somewhere with out having to do a complete clean reinstall 7. I looked here for answers and met several all through the web, including here none have solved the problem.  I would be grateful at least someone leading me in the right direction on this issue if you can.

  Hope this is the right place to post also. If this isn't the case, please advise.

  Journal name:

  Source:

  Date:

  Event ID:

  Microsoft - Windows - Kernel-also racingl Admin
  Microsoft - Windows-Kernel-EventTracing

  02/06/2013 -07:59:57

  2

  Task category: Session

  Level: error

  Keywords: Session

  User: SYSTEM

  Computer: BarbKeenan-bail

  Description:

  Session "circular kernel context Logger" was able to start with the following error:

  OxC0000035
  EventXmI:

  
  

  BDB6-4648-BC92-F3FDC74D3CA2}">I >
  2

  O

  2

  2

  12
  Ox80000000000000 1 O

  I >
  2713

  I >

  I >
  Microsoft-Windows-Kernel-EventTracing/Admin
  BarbKeenan - bail

  I >

  
  

  Kernel context Logger circular
  

  3221225525
  268436608

  
  

  For what it's worth, I have this error periodically on several Windows 7 systems.

  She seem to be a non-event and does cause some system problems.

  I don't think that your freezing problem is caused by the present.

  However, take a look at this thread.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/2eab69ac-7537-40c4-916e-6f6d41c05d4b