Service pack 1 download problem

Similar Questions

• 800F0900 error Vista Service Pack 2 download problem

  I am unable to download Vista Service Pack 2. Tried auto and manual download. Every attempt after a short time to download, the error 800F0900 rises. This is the only download that I got this problem with. I had originally a free version of McAfee, but in recent years, I have a paid version which is still topical. Any help would be appreciated. Ted B

  The 0x800f0900 error code represents an error of parser internal XML (CBS_E_XML_PARSER_FAILURE).

  Troubleshooting steps: -.

  Check your hard drive for errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  http://support.Microsoft.com/kb/947366

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  FYI

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• How can I stop Vista Service Pack 1 download... its stuck at 83% and clicking stop installation does not work

  How can I stop Vista Service Pack 1 download?  I tried to download the service pack one and its deadlock in 83%...after 5 hours I hit stop installation, but it just gray out and don't stop - I'm afraid to restart because don't know what will happen.  Help, please... I think that probably Norton it stopped completely download so I'm cutting of norton, but nothing is happening because I think that the serivce pack is stuck in the loop.  Any advice would be greatly apprecaited.  Can I reboot? Can I go back to a restore point?  Thank you

  Hello

  This problem may be due to Norton or other software. You can restart the computer and check. If all goes well, you should be able to boot to the desktop without any problem.
  The error message in the event viewer can point to the program which caused this problem.

  Reference:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  What are the information in the event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can download the latest service pack using the article below and verify if you are able to install it.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

• Windows service pack 1 downloads 99.9% but still comes up with error and does not?

  Windows service pack 1 downloads 99.9% but still comes up with error and does not?

  jktjw,

  Please post with the information requested here: what to post in the Windows Update forum
  Start with the troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• service pack 2 download the 8007371C error message

  What should I do to get this service pack to download? Suggestions please. I tried 3 times now and has failed every time.

  The only thing I can say is that you perform a repair - installation

  Run a repair installation will restore the current installation of Windows to the version of the installation DVD. This also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair of Windows Vista or Windows Server 2008 installation, follow these steps:

  1. Close all applications and restart the computer.
  2. Insert the Windows Vista DVD or Windows Server 2008 DVD into the DVD drive of the computer.
  3. In the settings window, click install now.

     Note If Windows does not automatically detect the DVD, follow these steps:

     1. Click Start and type Drive: \setup.exe in the box start the search .

        Note The placeholder drive is the drive letter of the computer's DVD.

     2. In the list of programs , click Setup.exe.
     3. In the settings window, click install now.
  4. Click connect to get the latest updates for installation (recommended).
  5. Type the CD key if you are prompted to do so.
  6. Click Yes to accept the Microsoft software license agreement.
  7. On the which type of installation do you want? of the screen, click upgrade.
  8. When the installation is complete, restart your computer and try to install the updates again

  NB: As you already have SP1 for Vista - step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed. http://support.Microsoft.com/kb/948537

  Make sure that you back up your important things first. Then run Windows Update to catch up on all the updates up to SP2.

  When you're offered SP1 install, then continue until you're offered SP2 and then install it. I hope that all is well.

  Uninstall SP1

  TaurArian [MVP] 2005-2010 - Update Services

• I'm having a problem with the windows vista service Pack 1 download and installation.

  KB936330

  The error Code is 800F081F
  Code 800F081F
  When I run windows update as it says it's a pack recommended important I need, and then when I try to download and install it won't get this error just keeps popping up. Also, saying: unknown error.

  If someone please tell me the solution?

  Hi Berto5097,

  Thank you for using Microsoft Vista answers Forum!

  The following are possible causes of this problem:

  ·         A program on your computer interfered with the installation of the service pack.

  ·         There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  Take a look at the article, follow the steps from there to solve this problem

  http://support.Microsoft.com/kb/947366

  If please reply and let us know if your problem is resolved or if you need more help

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Windows Vista Service Pack 2 installation problem

  I am having major problems installing service pack 2 on windows Vista on a Dell Inspiron from 32-bit. It returns the 8007000D error code.

  I tried the PC back to factory settings, removing the anti-virus and the deactivation of some things non-nessasary start up with msconfig. Also, I have disabled all the wireless devices using a switch on the side of the laptop - it seems that would enable me to install service pack 1.

  Even with all the foregoing it always fails and recommends the system "Update system tool" update running. I have run, restart the computer and run the SP2 and it does not always work with the same error message.

  The only other methods recommended to install must remove antiviris and other programs that I've done so I don't know what to do!

  Help, please!

  Thank you

  Matthew

  Robear,

  Thanks for your reply.

  I looked at the link (http://support.microsoft.com/kb/947366) and went through all the troubleshooting guide without success. With my current attempts to install SP2 (after the return to factory settings), I remove McAfee from the computer (that came with it as default) and then install the service pack SP1 and SP2 by using the stand-alone installation programs by downloading from another computer.

  Thank you for give me the Microsoft technical support link, that I had read on another thread that the free support is exhausted.

  I will try to sue microsoft and come back here if I have any luck!

  Thank you

  Matthew

• Vista Service pack 2 install problem on Dell XPS M1330 with SSD hard drive

  Hello

  I have a DELL XPS M1330 with Solid State SDD drive. None of the solutions have solved my installation problem including run all the tools to clean up the intall. It restarts after installation, then crosses the restart process, then the States 'installation failed' and then back again.
  Vista Ultimate 32 bit, 24 GHz chip. Nothing else cannot simply install service pack 2.

  Thanks in advance for your help

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  =============================

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• XP Service Pack 3 download

  I thought I had solved this a few weeks ago, but obviously not...

  Automatic updates keep informing me that SP3 is available. It downloads and installs fine, but restart the computer, the following message is displayed;

  We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  If your computer stopped responding, restarted unexpectedly or has been automatically closed down to protect your files and folders, select last good known to return to the setting Configuration most recent works.

  If a previous startup attempt was interrupted due to a power outage because the power or reset button has been activated, or if you are not sure what caused the problem, choose Start Windows normally.

  Safe mode

  Safe mode with networking

  Safe mode with command prompt

  Last good Configuration known (your most recent settings that work)

  Start Windows normally

  This last option is automatically highlighted and if left to himself, countdown and restart constantly, back to the above message each time.

  Last known good Configuration did the same thing.  Didn't try the Mode safe mode with setting in network or command line that I have no idea where it would take me.

  I just go to Safe Mode and restart from a set Point earlier.  I tried Mr. Fixit and all the other suggested links, but can not solve this problem.

  The computer is a 2nd hand Compaqu Presario and I deleted all the games that the previous owner had loaded, but there may be settings still there that cause this problem, even if I have restarted with factory settings, redownloaded SP2 and Microsoft office etc.

  It's that SP3 installs?

  If so, I apologize for the missing something, I normally ask.
  I thought that for some reason any you were trying to use the automatic updates or Windows Update using SP2.
  However, in case your Compaq (HP) PC with an AMD processor, you really need to check out these links:
  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)

  Microsoft Windows XP SP3 Upgrade utility for systems with AMD processors.

• service pack 3 installation problems.

  [Error number: 0x8024400A]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues This is what I am trying to install service pack 3 for my windows xp. I download file kb914882 - x 86 and I tried one more time after that, but nothing. MSE needs to install service Pack3. Please help someone?

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  

  Download the Windows XP Service Pack 3 package now

  (http://www.microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4)

  Important These service packs apply only to 32-bit versions of Windows XP.

• Service Pack update and problems w / IE

  I got a notification of update of the week last for a new service pack.  It took hours to update and when it was finally over I had the latest version (I think) of Internet Explorer.  Since the update, I had any other problems.  Error messages are constantly upward (Internet Explorer does not work - or something like that), some Web sites (e.g., Pogo) rise in blocks or stop completely.  How do I either fix this or uninstall this service pack for me where I was.  I was starting to not be able to go to some sites because of IE not updated, but it was much better than this!

  I got a notification of update of the week last for a new service pack.  It took hours to update and when it was finally over I had the latest version (I think) of Internet Explorer.  Since the update, I had any other problems.  Error messages are constantly upward (Internet Explorer does not work - or something like that), some Web sites (e.g., Pogo) rise in blocks or stop completely.  How do I either fix this or uninstall this service pack for me where I was.  I was starting to not be able to go to some sites because of IE not updated, but it was much better than this!

  Windows Vista has not had a new service pack in more than three years.  Service Packs do not have (historically) come bundled with new versions of Internet Explorer.  That's the different updates.

  What version of Internet Explorer you have?
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using

  What specific edition and service pack of Windows Vista level you have?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

• WINDOWS VISTA SERVICE PACK 1 (KB936330) PROBLEMS? Help, please?

  Windows Vista Service Pack (KB936330) will not install? I tried several times, it will take about an hour to download, then just when I think she finally takes, it cancels everything back, and it takes another hour? He says it's important, but I can't do it, can anyone help? I would be grateful if someone could tell me what I need to do.
  Thanks in advance for your time
  Race...

  Hi racechasser,

  Thank you for using the answers.microsoft.com forum.

  .  .  Please download the service pack again. It may have been a corrupted download.p >

  You can ensure that a download manager is used for this process, so not yet of corruption that happens.   Search live.com or your search engine preferred download manager and select the one sure what you will find.

  Here is a link to the service pack.  https://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  Another way to look at this question is to get information of the event viewer on the failure that occurred.  To review event viewer / click on the ORB Start / computer right click / Select manage / select event viewer.

  Find the information in Event Viewer on the failure of the update installation and provide this information on the forum.  As well as if there is an error, you receive what it is and ID # is.

  Safety Note: always have on hand a good backup before you start any installs/updates/or diagnosis of troubleshooting.

  Let us know for more information if necessary.

  Thank you

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• Product key required for Windows XP Service Pack 2 download.

  I had to back up my data and reinstall Windows, yesterday. I downloaded Windows XP Service Pack 2 installation network for IT professional and developers using Dell's Support Package. Everything seemed to be working fine until I opened a Word 2002 document and asked for a product key. I ran Microsoft Genuine Advantage Diagnostic Tool and product key turns out to be xxxxx-xxxxx-GD6GR-K6DP3-4C8MT. What can I do?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a test free version comes preinstalled when you buy it and that would have been reinstalled, but invalid, when you reinstalled Windows)?

  PS: Your new thread had a response-online http://social.microsoft.com/Forums/en-US/genuinewindowsxp/thread/489138ff-4ad5-4678-895b-2372fe66d13f

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Service Pack 2 installation problem

  It's very strange.

  1. the laptop is a Sony where install a Vista - 32-bit clean has been made some time ago, in Portuguese, because he's my friend of the Brazil.

  2. the properties of the computer says that it has installed ServicePack 1.

  3. the update of windows to install service pack 2

  4. I run the SP2 Setup and it is said that it has been installed.

  5. I reboot the computer, check the properties of the computer and it says it has SP1 (not SP2).  and the windows icon appears and says that SP2 is ready to be installed.  So, I ran the installation again and I get the same results.  I did cela 10 times and still the same result.

  6. I download SP2 (all languages - 32-bit version) to my computer so I can try to install it in this way.  When I do that, it gives me a message that SP1 must be installed before installing SP2.  (can you believe it?)  So, just for grins, I download SP1, run the install.  The message that I get when I do this, it is that SP1 is already on my computer.  (ouch)  Now, apparently, there was disagreement with SP1 and SP2 are reports even if the properties of my computer that I already have SP1 installed.  Now I am frustrated and laughing.

  7. so, I ran the CMD Scannow program that someone suggested here and he said that he corrected certain errors.  I ran also register and frag clean disk.  I restarted my computer and see what happens.  Does anyone have suggestions more?

  Thank you

  Mike

  Try first with Safe Mode, see the link: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode this applies to Vista or you can see the Vista Help for this topic.

  You can try this, if safe mode does not work, clean boot, it event all other programs and services.

  http://support.Microsoft.com/kb/331796
  Good luck!
  Concerning
  Carpet H

  HP Pavilion a6412.sc 4 GB RAM, Windows 7 x 64 Home Premium, Comodo IS 3.13, Samsung SyncMaster T200, Seagate Freeagent 500 GB, HP 1510PC

• Windows XP service pack 3 download not have service pack 2 have 32 bit version home

  computer had to be restored to the factory setting.  HP Compaq Presario V5000.  has been successful.  Watch service pack 2 Windows Xp home 32-bit version. [Cannot download SP3 shows error number: 0x8024400A]. Can someone help me? Thank you

  See this previous discussion-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/i-cant-download-service-pack-3-sp3-getting-error/73ecbb4e-b355-43c4-8d97-94945fb86b07