Multi touch is disabled (Greyed out)?

Similar Questions

• Buttons disabled (greyed out), symbols

  Hello

  I downloaded the demo of Flash CS5 and am trying to use the software, but a lot of symbols and buttons are greyed out for me and I don't know why.  Here is a typical use case for me:

  -Open Flash CS 5

  -Create a Flash AS3 project

  -Try to use the buttons on the toolbar on the right, but they are greyed out

  Also, I can import images of the scene or the library, but I can't click on anything whether or change their properties.  See image attached to a screenshot of the buttons in their state disabled, grayed out.  I can even open an old project realized in CS4, but still, I can't change all the symbols I've done.

  Is there something I need to do to activate the buttons?  Any help would be greatly appreciated.

  

  that doesn't look good.  you are missing your file menu.

  Click on the key and select a different workspace.  and pray.

• How to disable-grey-out "Image-> auto contrast"?

  I just opened my first jpg in Photoshop CS5 and tried to use 'Image-> auto contrast', but all the Auto (tone, contrast, color) are greyed out. Image-> Mode is set to "RGB color". There is only one layer and I tried different combinations of selection (control) and unchecking gray stay (command) the image but the D car.

  The last Photoshop CS5 Extended (Version 12.0.2) is running on a Mac Book (Snow Leopard 10.6.6

  I read 'Photoshop CS5 for Dummies' of Peter Bauer and "Photoshop CS5 book" Kelby but can't find the answer in both. I also searched on the forum for "auto contrast" gray, but got 0 hits.

  Any help would be greatly appreciated.

  These Auto operations are destructive and cannot be applied to dynamic objects.

• 'Disable' greyed out

  Acrobat 8 - cannot turn off.

  Hi pauld70801145 ,

  Please refer to this article:- https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-help.html#topic-2

  Kind regards

  Christian

• (Solved) How randomly Multi touch gesture (stroke) to nex/prev tab (it's originally rear)?

  I have the multi touch trackpad. and if I drag with 3 fingers, it is behavior front/rear. but I want to make tab prev/nex. I changed some values about: config and still it unaffected. I am downloading a screen shoot of on config filtered by "gesture."

  https://fbcdn-sphotos-c-a.akamaihd.NET/hphotos-AK-AsH3/734110_10151449162684415_1709914074_n.jpg

  I found out is that my clickpad sends magnetic signals such as alt + arrow so if you change the shortcut next/previous hit tab will do the same think.

• Firefox hangs and then greys out

  After a short period of normal use, Firefox hangs and when I try to click on a new page of image greys out partially. On the top of my screen it says that Firefox is not responding. My only course of action is close the program down. When I do a small window opens saying Firefox is not responding and gives the possibility of closing the program or waiting so that he could respond.
  I tried to remove Flash 11.3 and 10.3 installation - no change.
  Tried to delete and reinstall Firefox - no change.
  Don't disable all plugins - no change.
  Tried to restore the PC to a previous point - no change

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• certer draft.exe all greyed out

  Problems with getting windows XP updates, windows Center all greyed out when I try to uodates

  1. Check for the 'Automatic update' service manager
     Click Start, select run, and type: Services.msc
     Press enter
     Locate the - "automatic update".
     Make sure that the service is not disabled and started.
  2. If the service is disabled and cannot be started:
     Go to START, select RUN
     Type: regsvr32 c:\windows\system32\wuaueng.dll
     Press Ok

  If all else fails: -.

  Update Windows in gray - restore (line 179)
  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  Automatic Updates options are grayed out? :
  http://WindowsXP.MVPs.org/aupolicy.htm

• Greyed out on Hotmail icons and impossible to uninstall Silverlight

  • I had problems with my hotmail attach icons greying out and sometimes come back.  I tried all the normal stuff to rectify, but it seems I may be defective Silverlight.  I tried to uninstall Silverlight configuration/Add/Remove Programs Control Panel, but it allows me to remove it.  I tried disabling it, but that makes no difference.  Running Win XP Media Center Edition 32-bit with IE 8.

  Hello

  ·        What are the steps you have taken to resolve your problem?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What happens when you try to uninstall Silverlight to the system? You get the error message?

  ·        Are which hotmail icon you referring?

  If the problem started recently, I suggest you do a system restore to a point when the system worked very well and see if the problem is resolved.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  I suggest you to post your query on the forms of Silverlight for assistance.

  http://forums.Silverlight.NET/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• X 360 spectrum: spectrum x 360 Spec issue - general, keyboard, multi touch pen, RAM max

  1. where is more detailed information on the specifications of the HP laptops? I went to store.hp.com, and the information is not very detailed, at least on the 13 t. What differentiates the 13D dx models? Is there a function to compare to store.hp.com?

  2. what happens to this laptop keyboard screen rotates around the rear? The keyboard is still active? If this isn't the case, at which time he became disabled?

  3. the screen is touch multi touch at least 10 points? What is it?

  4. do this model have a stylus and place to store a stylus?

  5. I can customize to 4 GB or 8 GB of RAM, it is 8 GB of maximum RAM that can be installed in the present? What kind of memory does it take? What is the speed of the bus?

  6 has a SD card slot?

  7 are there of the best photos with, ironically, a 360 degree view so I can see what ports/slots it might have?

  8. What are the specifications of wifi?

  9 there BT?

  10 has an internal WWAN option?

  I love the look of this spectrum x 360 and see it as a possible replacement for my Fujitsu T901 sustainable. But I fear that if the details are also brushed over that I can find, there may be other details, I don't think to check.

  Hello

  1. from time to time, HP may change the options so you should look at these options to see the differences. Whatever it is today is maybe not available/aplicable next week or next month:

  http://store.HP.com/us/en/MDP/laptops/spectre-x360-211501--1

  the following manual will give you more information.

  http://h10032.www1.HP.com/CTG/manual/c04679496.PDF

  Normally the 13 t for a series which can be many models dx

  2 inactive automatically

  3. you can use at least 10 fingers at the same time

  4. you buy pen separately, I know the special leather cover.

  5. you must make the decision when buying, it is not extensible.

  6. Yes

  7. the manual above will show you, but not in color

  8. There are few options, see above

  9. Yes and no, see options

  10 NO.

  Kind regards.

• multi touch capabilities

  The Simulator allows to simulate the features simple touch.  Two questions:

  1. is there a way to test the multi touch on the Simulator capabilities?

  2. is there a way to disable the multi-touch functionality in my application since I could not yet test what happens if two or more simultaneous 'touch' to happen.

  Thanks for all of you who have some ideas about these issues.

  ... Jim

  JRab and I actually just discussed this point, way back (Jan?  Dec?).  I could try to find the thread if it mattered much.

  Our conclusion, I seem to remember that there are two main options.  Be the first point of contact is considered to be a mouse (MOUSE_DOWN, MOVING, etc.) and any secondary or points of contact (simultaneous) later would be ignored, or a secondary touch would effectively trigger the first to get false MOUSE_UP and then the new touch would get a MOUSE_DOWN, becoming the new position of the mouse.

  The latter option was rejected as fundamentally insane, so we thought that this is the first.

  It would mean that once you touch and keep your finger down, no other keys are recognized until you release the first finger.

  It seems likely that it is essentially as a special case of what would happen with touch input, where only four points of contact are supported and you try to hit a fifth point at the same time.  It would be unwise for the fifth point to be recognized... doing so would imply that even a simple wandering 'brush' the finger could screw up recognition of the actual keys.

  We would have guessed quite wrong, however, and there may be a third or fourth possibility that we hadn't thought about.

• Impossible to change the mouse settings to use multi-touch

  Hello.

  I own a Samsung Satellite C655D-S5209 and I can't use my multi touch on my touchpad control.  I recently tried to download a new driver (Synaptics PS/2 Port Touchpad Compatible) and when I click on device settings the only thing I can change is that the action of the left and right button.  How can I activate the scrolling, zoom in and out and other multi-touch controls?
  Thanks for the help.
  PKR0624

  Hello

  I figured (its why I mentioned a Toshiba driver!). Here is the link to the Toshiba Support site for your model: http://support.toshiba.com/support/modelHome?freeText=3083046 . Looks like you'll be able to find your driver here.

  Let me know how you fare.

  Kind regards

  BearPup

• HP g62 multi-touch touchpad

  Just reinstalled my windows 7 Home Premium to professional 7 and has encountered a problem with my touchpad device.

  With the previous version of windows, the touchpad has a multi touch function (and others two fingers to scroll, pinch zoom, rotation), but after I installed the new version of Windows, I had to reinstall all drivers. So I installed the latest drivers from the website of hp, installed, but the multitouch features are disabled

  Right click on the synaptics icon in the clock system tray and uncheck 'Disable gestures', now you can configure these features multi-touch in the properties of the mouse by using the synaptics tab if necessary.

  

• JavaFX 8 (Multi-) touch support in Linux?

  Hello!

  Multitouch input is expected to support Java 8 SE Linux? I use a touchscreen capacitive with a DMC controller, connected to a PC via USB Ubuntu 13.10, and none of the example code I've tried seem to recognize all key events. In Windows 7, touch events are recognized, I can drag, zoom, etc.

  So I wonder if the multipoint touch input is simply not supported on Linux with JavaFX 8, or I have another problem.

  Best regards

  Stefan

  The best way to find out is to check the javafx jira. From here you can easily find the answer :}

  The answer is not according to the following jira

  GTK: Support multi touch for Linux

  https://JavaFX-JIRA.Kenai.com/browse/RT-25079 as can see the status is still open.

• Cannot export/Share - greyed out

  I wrapped an edict of 25 minutes on the timeline.  Now, I'm having a few problems for export - all greyed out... can't share.  I relinked files a couple of times and now I reimport all media just to be sure.  I'll see if it works.  In addition - trash of pref or something?

  What would you say to build libraries or something.  BTW, re-import is complete and it has not helped.

  Everyone slayed this on FCPX 10.2.3?

  Thank you!

  Figured it out.  Once more, I learned that you can not do your support who come looking for you.  If you move projects and libraries around the drive to the drive, it may re - import media.  Remember those pesky missing radar alerts?  Re-Binder alone was not the problem.  You know you have a problem, when you leave FCPX and then re - login.  The problem files are going to be watching you.  Re-IMPORT media - then WAIT for it to import!  Don't rush - 9 order and look at the files to import.  Once the import is complete - all right.  Export and share to your heart's content!

• Unable to choose 'clear history' - it is greyed out and unselectable

  I can't select 'clear history' - it is greyed out and unselectable on my laptop. Only, it happens on my laptop, but shows my story for many months in the past and includes the history both of my desktops, which is supposed to be cleared frequently. Sync is enabled on all devices, and history does not appear on desktop computers. I am able to clear the history on desktop browsers, but not the laptop. Computer laptop operating system: Windows 7 Home Premium I also have IE, Chrome, Safari installed.

  Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • : Uncheck the [] "always use the private browsing mode.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/