"Session is not Authenticated" in step 2 convert

Similar Questions

• "The session is not authenticated" when you try to convert it to VMWare Infrastructure Server computer machine

  The image was a Linux P2V conversion... I didn't have my ESXi server on the same network, so I just used the Converter 3.0.3 Startup disk to create my virtual image (RHEL 4), and now I'm trying to use the 4 converter to convert the image from the server to the ESXi server.  When I do a "convert", I select 'VMware Workstation or another VMware virtual machine', browse my virtual machine's .vmx file.  In the next screen, I select "Virtual Machine of VMware Infrastructure" in the menu drop down and put my server, including the password information in the boxes below.  I click Next and that works fine, it connects.  From there on, I leave all the default settings and click Next... immedietely at the top of the window, I get "the session is not authenticated.   I did not find anything about it either with the search function, apologize me if I missed something.  Someone else encountered this?

  This happened to me when the time updated Inbox ESXi causing a shift in the session information on the host computer, which I was trying to convert.

  The fix was to bounce the agent converter on the server you are trying to convert.  For me all right.

• Session is not authenticated.

  When you run the stand-alone version of Vconverter, I get a popup on the Destination tab specify specifying that the session is not authenticated.  What does that mean?

  Thank you

  Steve

  Hello

  Restart vmware converter services and it should be ok.

  concerning

• vMA 5.5 the session is not authenticated after connect you to the target ESXi

  Im trying to add targe ESXi 5.5:

  VI-admin@localhost:~ > vifp addserver esxi1 authpolicy - fpauth - username root - password Passw0rd

  VI-admin@localhost:~ > vifp mailing lists

  esxi1 ESXi

  VI-admin@localhost:~ > vifptarget s esxi1

  VI-admin@localhost:~[esxi1] > list of network adapter for the network esxcli

  Runtime error: the session is not authenticated.

  

  In the task of the vSphere client inform me about create users:

  

  

  but when im trying to execute commands remotely I get:

  
  

  Runtime error: the session is not authenticated.

  
  

  A suggestion?
  

  In this post, I answered my second question, and I think

  Re: vMA 5.5 error: cannot add users.

• problem connecting vSphere6.0: javax.xml.ws.soap.SOAPFaultException: the session is not authenticated.

  In our plugin, we retrieve the ExtensionManager extension information. We use the following code to do this.

  private static void setContext(VCenterInfo vcenter) {
          Map<String, Object> ctxt = ((BindingProvider) vimPortType).getRequestContext();
          ctxt.put(BindingProvider.ENDPOINT_ADDRESS_PROPERTY, vcenter.getServiceUrl());
          ctxt.put(BindingProvider.SESSION_MAINTAIN_PROPERTY, true);
  
          String vmwareSoapSession = "vmware_soap_session=\"" + vcenter.getSession() + "\"";
  
          @SuppressWarnings("unchecked")
          Map<String, List<String>> headers = (Map<String, List<String>>) ctxt.get(MessageContext.HTTP_REQUEST_HEADERS);
          if (headers == null) {
              headers = Maps.newHashMap();
          }
          headers.put(COOKIE, Collections.singletonList(vmwareSoapSession));
          ctxt.put(MessageContext.HTTP_REQUEST_HEADERS, headers);
      }
  
  
      private static Extension getExtension(VCenterInfo vcenter) throws RuntimeFaultFaultMsg {
          setContext(vcenter);
  
          ServiceContent sc = getServiceContent();
          ManagedObjectReference extensionManager = sc.getExtensionManager();
  
          return vimPortType.findExtension(extensionManager, KEY);
      }
  
  
  
  
  
  
  
  
  

  vCenterInfo = VCenterInfo [name=10.18.236.231, vcenterUuid=fb1e5cdf-9b34-405d-946f-bcd450139a7d, serviceUrl=https://10.18.236.231:443/sdk, session="77b4562fbca17ce1bc27f8371c5ed737316ca77e", thumbprint=05:80:1B:A7:D0:05:DF:A1:F0:1D:E2:66:FA:66:4C:26:61:A9:65:33, version=6.0.0] 
  

  This code works perfectly in vSphere 5.5

  Recently, we have begun to test vSphere 6.0 and continue to operate in this exception.

  Caused by: javax.xml.ws.soap.SOAPFaultException: The session is not authenticated.
    at com.sun.xml.internal.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:178)
    at com.sun.xml.internal.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:125)
    at com.sun.xml.internal.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:108)
    at com.sun.xml.internal.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:78)
    at com.sun.xml.internal.ws.client.sei.SEIStub.invoke(SEIStub.java:135)
    at com.sun.proxy.$Proxy499.findExtension(Unknown Source)
    at com.<companyname>.service.vcenter.VCenterService.getExtension(VCenterService.java:149)
  

  The exception is thrown on the back vimPortType.findExtension (extensionManager, KEY); line.

  If we run the same code using the exact same URL and a separate project (simple java program) session ID, we have no problem and get the correct information. All of our other software modules that have a similar code work fine. We also looked at each log file, we could find but could not find information about a session is invalid or not authenticated.

  String vmwareSoapSession = "vmware_soap_session =-""+ vcenter.getSession () +"\""; "

  You use the additional quotes here. Remove the quotes further from here.

• "The session is not authenticated." all in createContainerView

  Hello

  I use gSOAP (http://www.cs.fsu.edu/~engelen/soap.html) to create stubs of the vim.wsdl file provided by vmware sdk C++. Using these heels, I wrote a simple client application that starts with extract service content (using the retrieveServiceContent method) and then connects to the vcenter Server (using the connection method that takes the ManagedObjectReference of sessionManager returned by retrieveServiceContent(), username and password).

  But after that when I call the createContainerView method to create a view of the VirtualMachines, it returns the SOAP_FAULT:

  SOAP 1.1 fault: "': ServerFaultCode [no sub]
  "The session is not authenticated.
  
  
  What is the way to authenticate a session? Kindly guide me on this.

  I spent a lot of time on this a few years ago, but I didn't spend much time on this topic recently... I've maybe rusty.  If I recall, however, the session not authenticated (assuming that your configuration is correct) is usually a failure to include the WITH_COOKIES macro in the build process.

  Keep in mind, all compilation gSOAP products as well as your executable program must include WITH_COOKIES.

  You will need - DWITH_OPENSSL-DWITH_COOKIES.  I used to include - DWITH_GZIP, but I have never tested the GZIP support (should be automatic for compression).

  I ended up creating Makefiles to generate static and dynamic libraries especially with long compile times that you get with the huge vSphere SDK WSDL.

• How to operate continuously the ' frequency with digitizer step-down converter external vi "?

  Hello

  I use SMU-5663 on SMU-1075 chassis. My goal is to use "step-down with digitizer external .vi" in order to run the SMU-6901 frequency continuous step-down converter. To do this, I added a while loop to the provided sample (see file attachment). The problem is that the while loop does not change; the program stops as soon as its launch.
  Is there anyone who can help me with this you problem?

  Hello

  The 'get frequency response' VI aims to help correct the answer of the step-down in the acquired data. The response of the step-down changes only with frequency and reference level. In your VI, you are in a loop when you call 'Get frequency response' but do not change the frequency or level baseline for the release of the VI will not change.

  To use the external digitizer, you want to adjust the center frequency and level in DAMA reference, read the frequency response and frequency step-down converter win in DAMA, to acquire data starting from the external digitizer and correct using the frequency response of the step-down, and win. You can loop through the acquisition and treatment portions until you change the central frequency or reference level.

• external frequency step-down converter

  Hello

  1. I have a digitizer 5142 with a resolution of 14 (16) bit. can I change this rate of 8-bit scanning, or can I get a signal to 8 bits using 5142 I

  think I can using neither scope config. If yes also means I increased the speed of 200MBS 100MBS (since I am only

  using 8-bit scanning). increases the speed of transfer of the data from my memory shipped to hardisk only or both are applicable

  2 - I read this specification 5142 when I stumbled upon two things that I surrounded as JPG attachments

  a. filter anit-alisasing has a bandwidth of 40 Mhz, and default 5142 uses what it means. Can I use

  some other external down converter instead of 5600 and which can acqiure 40 Mhz bandwidth at any center frequency and I can feed to

  5142 to get digitized and writre a file on my disk. .i can't use DAMA since I use a step-down external frequency converter. How using or

  scope/tuner vi.

  (b) the other is true flat bandwidth = 0.4 * rate and bandwidth flat complex sample = 0.8 * sampling frequency that we mean by these two.

  Concerning

  MADD

  Hi malala.

  1. correct me if I'm wrong. Insofar as I have defended frequency translation means that if I have acquired a signal at 50 MHZ with a 40 MHZ Bandwidth (F_high = 70 Mhz and F_low = 30 Mhz). My frequency step-down converter. If I select the option enable translation frequency and frequency set to 20 MHZ (option to activate with the SDC thus) signal that I have gained is now translated to 20 MHz (C.F), the maximum frequency to 40 Mhz and Minimum to 0 Mhz. Is it so? If this is correct, then I think that my Ghost will meet the requirement of the spectrum of nyquist and won't be mitigated...

  Not quite fact-frequency translation used to take your signal of a certain frequency IF complex base band (centered around 0 Hz). If you set your frequency of 20 MHz, 20 MHz will tune to your NCO and you will acquire some bandwidth, based on IQ rates, around this central frequency. For example, if you used 20 MHz bandwidth (rate of IQ = 25. MECH / s) and a center frequency of 20 MHz, get you 10 MHz to 30 MHz of frequency and translate this to baseband. Now you have your frequency content at +/-10 MHz.

  To do what you seem to want to do, you must set your frequency to 50 MHz as well as your IQ rate to 1.25xBW = 50 MECH. / s. This will mean your 40 MHz BW from 50 MHz to complex baseband.

  2. also mention that I can put this decimation is property invoke node or filter specifications.

  Decimation is another property of the OSP and the mechanism of the clock. Your decimation is defined by your IQ rate compared to your time base sample clock. For example, by default, we use a time base 100 MECH. / s for the 5142. If I put my IQ rate 2 MECH. / s, I will use a factor of the decimation of 50. Our table of decimation emphasises, however, that, in the range of 12 to 4 096, we can only use decimation integers that are multiples of four. So, we will eventually be forced in this case to 48 and a sampling rate of 2.0833 MECH. / s. You can then perform resampling to 2 MECH. / s in the software.

  3 - something else enable and disable the noise/anti-aliasing filter. Combination of maximum frequency of niscope configuration characteristic.vi. If I put it in noise filter 20 Mhz is on now and when I started 35 Mhz filter anti-aliasing is enabled. Is it so?

  That's right - your maximum frequency setting to be in one of these filters will allow this way. If I put a maximum frequency of 19 MHz, the filter is activated. If I put a max of 30 MHz frequency, the Anti-aliasing filter is enabled. 0 will default, and -1 will allow full BW.

  Kind regards

• keep getn not authentic windos message program have windos xp when purchased computer must get rid of this version and re-install my old one? Help

  I keep getn a mess. on the windos is not not authentic I have here startup disk got when purchasing my computer had to re install but cant Mindprint rid of sanitary version... Caddy

  http://www.theeldergeek.com/xp_home_install_-_graphic.htm

  Your computer must be authentic, but now himself. Try to activate by phone.

  How do to activate Windows XP by phone to contact a Microsoft customer service representative to activate Windows by phone, follow these steps:

  1. Click Start, point to programs, point to Accessories, point to System Toolsand then click Activate Windows.

     Or, click on the Activation of Windows icon in the notification area.

  2. Click on Yes, I want to telephone a customer the service representative to active windows now.
  3. Click read the Windows Product Activation privacy statement, click new, and then click Next.
  4. Follow the steps in the Activate Windows by phone dialog box, and then click Next.

     Note The number appears now and differs based on the location you select.

  5. When activation is completed and you receive the following message appears, click OK.
  http://support.Microsoft.com/kb/307890

  If this post answers your question, click mark as answer .

• NOT AUTHENTIC WINDOWS PROGRAM

  I recently moved fron to the United States, to the Mexico, after my computer connected to the internet now I get a message the windows xp Pro copy on my computer is not authentic to used in the field I'm located... never had a problem bofore, any ideas

  Hello

  This happens when you move from one place to another, I suggest you to reactivate your copy of Windows XP through activation of the phone. Follow the steps mentioned below.

  How to activate Windows XP by phone
  To contact a Microsoft customer service representative to activate Windows by phone, follow these steps:

  a. click "Start", point to "All programs", "Accessories", "System Tools" and then click "activate Windows".
  Or,
  Click on the Activation of Windows icon in the notification area (aka system Tray).
  Or,
  By clicking on the Start button, click Run, and then type in "oobe/msoobe / a", then press the Enter key on your keyboard.

  a. click Yes, I want to telephone a representative of active windows customer service now.

  b. follow the steps to activate Windows by phone dialog box and then click Next.

  c. When activation is complete and you receive the following message appears, click OK.
  "You have activated your copy of Windows.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Your copy of windows 7 version is not authentic

  while I was trying to upgrade to windows 10, my cell phone was off because of the power cut. later, when I switched on the system, the previous version of windows 7 has restored and now its posted "your copy of windows 7 version is not authentic. How can I get my system works as usual, again with windows 7?

  Hello Faye,

  I would like to know some information about the problem so that we can help you better.

  What is the complete with code error message when you say: "your copy of windows 7 version is not authentic?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing due to the problem of activation of Windows. I will definitely help you.

  This problem may occur because of the settings and files from corrupted Windows activation.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Windows 7 displays "Windows is not genuine" with a 0x80070005 error code
  https://support.Microsoft.com/en-us/KB/2008385

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  https://support.Microsoft.com/en-us/KB/322756

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Deployment failed: 1 error: peer not authenticated

  Hi everyone I have a problem, helps to explain the case:

  PlayBook OS 1.01.1630 Simulator

  BlackBerry Tablet OS SDK 1.0.1 for Adobe Air

  VMWARE OS has a player

  -Network with IP 192.168.1.30 briged connection

  -Active development mode

  -Password "playbook."

  the operating system works very well, I had the Flash Builder 4.5 and I followed all the steps, they on the blackberry for developers page, copy the example of hello world and do all the build options

  but when I run the example takes a long time and finally says that this message

  Deployment failed: 1 error: peer not authenticated.

  I noticed two other cases here have been resolved.

  in one case, it was because of the antivirus... .i is not any antivirus

  Firewall? ... no firewall at all

  Ping to 192.168.1.30 (VMWAre IP) successfully...

  Permitions system, I'm an admin on Win XP user

  the credentials are set to "password" and device IP is set to 192.168.1.30

  -> Said cases which came into OS settings-> Security wipe security. ... I don't have this option on my OS version!

  Someone ' else has this problem or if she had?  Please help, I've been on this one full day and unfortunately I do not yet see the Hello World

  Thank you!

  I found the solution, after moving and erasure of firewalls, Simulator, flash builder... I just uninstall vmware, download the latest vmware player, and it worked!

• A blackBerry Smartphones MicroSD card corrupt - converted files to the. Extension CH - what are the steps to convert to readable format?

  The microSD is corrupted (8gig) and not readable on Blackberry - using Blackberry Bold 9790.  Copied the files to the Windows laptop using the SD card, but cannot open them.  Majority are photos and videos.  FILE0000. CH, FILE0001. CH... FILE0010.CH.  What are the steps to convert to format for recovery of. CH files on laptop?

  These are files corrupted, made from a checkdisk utility. You can usually convert them to what whatever and I usually just delete them.

• construction of not authentic Windows 7601 error

  I have not authentic windows build 7601 error and I tried MGADia.exe but it won't let me copy the report. I get an access denied error message. Even when I run slui.exe can help you to clear the message not authentic? Thank you.

  Hello

  The problem can be solved by recreating the license store.

  Perform the steps suggested by George1009 from the link below and check if it works.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/this-copy-of-Windows-not-genuine-build-7601/3f8c4101-2d5a-4130-b7ef-bd5609dc4c18

  Answer please if you have any questions.

• The Adobe software you are using is not authentic.  CS6 is suddenly 'not real '?

  I've been running the CS6 Production Premium since February 2015.  It was purchased and downloaded directly on Adobe.com.

  Today when I started After Effects received a warning that my software is not genuine.  By clicking on 'other info' found that all products spend their license status, but they are that everyone listed as 'software falsified. "

  I did not alter the software in any way.  It's a clean install on a Mac under El Capitan.

  Adobe recommends 3 steps to protect my work and myself:

  1. replace the non-genuine software, you use with the genuine Adobe software

  2 uninstall the non-genuine software on your machine

  3. help others reports the dealer who sold you the software not authentic

  So I thought I should report the dealer who sold me the software.  He has been to Adobe.com.

  I'm afraid to try to uninstall and then reinstall it in case it is blocked.  It seems to work fine now.

  Anyone else having this problem?

  Hi Cmaynard69,

  Added what Sheena suggested, please lets you check this link: FAQ authentic Adobe software and more information on authentic Adobe software.

  Meanwhile, please share the serial number that you used to activate the application and "Your ID" as shown in the screenshot via private message so that we can validate the details and help you in the next action plan.

  

  Thank you.