Setting up my chromecast after I connected it to my TV. Impossible.

Similar Questions

• Error F:\ is not accessible, the setting is incorrect. "after you connect a hard disk.

  Hello

  The old laptop "died"... is no longer start Windows XP.  I was not looking for repair/format the internal hard drive; I just removed

  the laptop and ordered a USB-to-IDE/SATA adapter.  I have a new laptop running Windows 7.  When I connect the former intern

  hard drive for the new laptop (via USB) device appears as 'Local disk (f)', and the hard drive physically starts to operate.

  Unfortunately, when I select ' disk (f) Local ' to access the files the computer works for several minutes and eventually, a mini-window

  appears stating "F:\ is not accessible.   The parameter is incorrect. "I've seen a number of concepts on the internet in administrative matters

  controls, testdisk, chkdsk, but I have not taken action yet because I'm not sure what to try first.  Thanks in advance for your help.

  Kind regards

  Edwin

  Original title: new laptop can't access the files from the hard drive of the laptop old (the parameter is incorrect)

  Hi all

  To resolve this problem, I ended up going to the start window.

  1. type cmd in the box start search

  2 right click on cmd.exe window and choose Run as administrator

  3 type chkdsk /F /R /X E:

  (Note: the drive is identified as E :))

  After several hours later, everything was fine and accessible.

• I've updated my iphone5 to IOS10 and now my old photos are blurred. He said: "no account icloud don't set up-missing userRecordID. IM connected to my Icloud but...

  I've updated my iphone5 to IOS10 and now my old photos are blurred. He said: "no account icloud don't set up-missing userRecordID. IM connected to my Icloud but...

  Hello Dulceallison,

  Please ask questions on iCloud and photos after the iOS 10 update here in Apple Support communities. We don't like hearing about questions after each update or upgrade. I am pleased to offer you some things to check to help you with your photos are blurred and alerts that you have received with iCloud.

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, we need to verify your configuration and ensure iCloud library is enabled and check if you are using the storage optimization feature. Please open this help link: iCloud photo library. There is a section on titled mid-race "save space on the device. He talks about the storage settings optimize. When this option is enabled, you will get in their original, high-resolution images of resolution lower, while iCloud library keeps all your photos and videos. You can check and see what images are stored in iCloud by clicking on this link: icloud.com, sign in using the same Apple ID that is connected on your iPhone. Click on the Photos. If you use iCloud photo library, you will be able to see all your photos. Upstairs in the Center, it allows you to see Moments or Albums, and if you scroll all the way down it will tell you how many photos and videos that you have. Also, some scroll down and try to check a few who appear fuzzy on your iPhone. Icloud.com are also blurred it?

  If you use iCloud photo library, and even if you see lower resolution versions of the photos on your iPhone, they should not be blurred. Make sure that you have made a backup and then please go to settings > iCloud on your iPhone. Turn off the photo library iCloud, wait a minute or two and then turn it back on. It should be re - synchronize your iPhone with iCloud. Check if the images are still unclear. If they are, please fully sign off iCloud on your iPhone. There are options to save contacts on the iPhone, and other documents and other will be deleted form the unit. Don't worry, this information is recorded with iCloud and also saved in the backup. Once all signed, restart your iPhone. This article will help you if you need the steps to restart the appliance: restart your iPad, iPhone or iPod touch. Once the device powers turn it back on, go ahead and return to the settings > iCloud. Sign in with the same Apple ID that was signed previously. It may take a few minutes to return all documents, data, photos, contacts, and calendars, but once this is done, go ahead and check your photos. They match the icloud.com images? Are they accuse still blurry on your iPhone only? See if you can isolate a specific set of images, or if all the photos on the iPhone are blurred.

  I hope that steps with deactivation and activation of photos in iCloud or logout and back in iCloud has resolved the issue, but if not, please provide the information for the steps that we have achieved together so far and I'll be more than happy to continue checking of other options to get this working as expected with you. Thanks again and have a great rest of your day.

• stop work after 30 seconds after the connection of 32-bit applications

  I have a problem that some of my 32-bit applications (vlc.exe, sapphireeffectbuilder.exe... etc) fail to start if I try after 30 seconds after the connection to windows. I managed to identify only a couple of processes that stop after 30 seconds of recording. These are:

  SearchProtocolHost.exe
  SearchFilterHost.exe
  IAStorIconLaunch.exe

  I'have tried to re-indexing and reinstall the intel RST service but no luck so far.

  I can see the vlc.exe in the system tray, but nothing of lance. Help, please. Thank you

  Hello

  Please contact Microsoft Community. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  This problem might have occurred because of these reasons:

  1 conflict between third-party applications.

  2 corrupt system files.

  3 virus.

  Try the steps listed here:

  Method 1:
  I suggest to start the computer using safe mode and check if the problem persists or not. If the issue happen not in Mode without failure, you can set up your computer in a clean boot and check if it helps.

  Step 1:
  Start the computer in Mode safe. At the start of the computer Mode safe with the minimum set of drivers and files.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:
  If the issue happen not in Mode safe, we will set up your computer in a clean boot state and check if it helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you to virus scanner to make sure that the computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  (1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Method 3:
  If the problem persists, I would say allowing you to run the auditor of file system (CFS) analyze and check if it helps.

  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833/en-us

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• T42 - stop and restart after the connection

  My T42, running on Windows XP, suddenly stops right after the connection and while the hotkeys on the loading screen.

  A message in white letters on a blue screen starts like this:

  "A problem has been detected and windows has been suthdown to prvent from damage to your computer.

  IRQL_NOT_LES_OR_EQUAL

  If this is the first time you've seen this stop error screen, restart your computer. "If this screen appears again, follow these steps:

  And the product message points to check any new hardware or software installation. I have not recently installed a software or hardware, so I'm a little lost on how to proceed from here.

  No clue on what could be the problem or any recommendation, short doing a full recovery from a recent backup?

  Any help will be much appreciated. Thenks.

  = UPDATE =.

  After running a few tests using the blue Access IBM button and PC Doctor 2.0 running, memory tests have shown the following results:

  Fast memory - all sockets - failed

  Fast memory - Support 1 - spent

  Fast memory - take 2 - failed

  This seems to indicate that one of the two memory is faulty. This hypothesis is correct?

  If so, what should be the next step? My laptop is out of warranty. I should bring it to a repair shop, or could I order the replacement and install it myself easily?

  I am not versed in repairs to equipment and feel a bit discouraged to start to mess with storage media...

  Any advice, please?

  Thank you

  It is probably a faulty stick of RAM in the second location rather than the power socket. Best bet is to remove the module RAM then see how it goes.

  Second is really easy to access. It is under the laptop - there is a small door in the middle of the base set with a single screw. Remove the screws and remove the door to expose the RAM module. Pull the wire staples on the outside of the restraint SODIMM socket and the RAM module should appear and then remove. Replace the cover and try the laptop again.

  IF you must replace the T42 uses to off the shelf of a DDR SO-DIMM, PC2700 speed RAM - needs. Will take up to a 1 GB module in each socket. First is harder to do because he must remove the keyboard to get home. It is only 4 screws but can be a bit tedious for a novice.

  Edit: The instructions for IBM appropriate here: http://www-307.ibm.com/pc/support/site.wss/MIGR-46513.html

• Unable to connect to the home network after you connect to the internet at Duke University

  Noteboook W7 Pro cannot reconnect to the network after you connect to the internet as a comments/visitor at Duke University.  The Duke system is predatory changes to my computer, and I can't fix it with the restoration of the system.   The home network is a Windows workgroup with most XP, no password only required machines.  This has happened in the past when the guest was an XP machine too, and then he had something to do with the DNS settings.  Cost me a lot of time and anguish and loss of productivity.

  Hello

  1. do you get an error message? If Yes, what is the exact full error message?

  2. are you able to connect to the internet?

  See the help article and check if it helps.

  Method 1

  Identify and resolve home network problems

  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_2

  Method 2: Check if the problem persists in the boot.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know the status of the issue.

• Why don't I have easily select my questions open after the connection support?

  Why don't I have easily select my questions open after the connection support?

  When I connect support communities, I have still no clear idea where to find my support questions which remain open to check updates.

  Seems to me that this should be a great, distinct and separate button on the homepage of support after you have connected.  "My open issues Apple Community Support."

  Is this too much to ask?

  Steve

  1. Click / tap your username
  2. Click / tap 'manage subscriptions '.

  

• After I connect usb cable thro one ipod, firefox does not load, but other browsers work fine. ?

  Firefox works fine and is my favorite browser but after I connect ipod to my computer it will not load. Even after that the ipod has been deleted firefox always not load until the pc is rebooted.

  Yes, you must complete the process.

• 7.0.0.102 crashes immediately after the connection

  After update to Skype 7, it crashes immediately after the connection.

  I don't have facerig or FFsplit or any webcams. Update of Windows Firewall is disabled.

  The event logs show this:

  Name of the failing application: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Name of the failed module: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Exception code: 0xc0000005
  Offset: 0x00d527d7
  ID of the process failed: 0x1e7c
  Start time of application vulnerabilities: 0x01d029890c579caf
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Report ID: 58eb96c6-957c-11e4-aae2-00224d806fdf

  Any ideas that I can do to make it work again?

  I don't know, but maybe it's one of several cases in the latest version of Skype 7.0 is not able properly to interpret data from the BIOS. At least, that was the issue with the cases already reported with this error message:

  Exception code: 0xc0000005

  Offset: 0x00d527d7

  A fix may be available in one of the next versions of Skype. In the meantime, the solution is to uninstall version 7.0 and install the 6.21.0.104 previous version.

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

• After have connected you, download applications, where you disconnect?

  After you connect and download applications, where you sign on?

  On your phone you can disconnect by typing on your ID at the bottom of the tab selected in the application from the App Store and then typing "logout" on the popup, or you can do this by tapping your id in settings > iTunes & App Store

• Outlook express hangs after the connection with the mail server

  OE6 hangs after the connection with the mail server?

  Make sure that the other machine is not check that the server so often a machine is not problems because it cannot be verified.

  Try to delete the account, compact the folders and close OE and reopen it and add the account back again.  Also make sure that the antivirus software is not interfere (see www.oehelp.com/OETips.aspx#3).

  You can also telnet to the server directly from this computer to see if it works (see http://techhelp.santovec.us/pop3telnet.htm).

  Sometimes it gets stuck in a message on the server and it can not get downloaded by OE, so it may be necessary to remove the message from the server, but if the other machine got, maybe it's not the question.

  Steve

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

  After the connection to my computer today and to go to Youtube, I get this error message on my screen.

  The assertion failed!

  Program:...
  File: common\npn_gate.ccp
  Online: 267

  Expression: pPluginShim

  I try to press abandonment and try again but nothing happen.

  Hi Shadwik,

  Thanks for the reply.
  I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
  After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
  After that my PC works fine.

• After removing the Tdss rootkit, computer laptop My Windows Vista Home Premium keeps restarting after the connection. __

  I had the Tdss rootkit on my laptop and removed using TDSS Killer of Kasperky. After the reboot, I have connected and saw a box that displays "Please Wait". After 5 to 10 seconds, my computer restarts. After the reboot, it shows options for Windows Vista loading, i.e. the safe mode, safe mode with network. I chose the mode safe mode with networking and everything works fine. The system properties box opens automatically. When I try to boot into normal mode, he repeated restart after the connection. I tried to run a restore of the system into safe mode with networking, but it tells me something about the system restore is in mode offline. I hit a brick wall and don't know what to do next. I don't want to if I have more options to factory default restore.

  The TDSS rootkit is very destructive.  It is not uncommon to make a computer work is not properly after removing it.  I advise you to restore your computer to factory default.  Not only is this the best option, it's the safest option.  I wouldn't consider the computer to be trusted without going through the restore process.  Even if you can be sure that 100% of the infection has been removed, you have no way of knowing what changes the malware made to the settings on your computer, which may be exceptionally vulnerable to future malware attacks.

• How to display the login page after having connected the laptop WiFi

  Hello

  I checked into a hotel that offers Wifi access.

  The first day, I connected to the Wifi where I select the appropriate name of Wifi since connection manager and also enter the security key that was provided to me. The navigation was very good.

  But on the times later, once that I selected the name of Wifi is no longer is asking for the password. The report shows 'connected' (to correct Wifi Hotspot) but also says -online access Internet No.. (although the connection strength is 'Excellent').

  I have taken note of what happens sometimes when I connect to my Office Wifi as well. Sometimes, need not the password, he said still "connected" but also "no Internet access", and I'm not able to navigate.

  With the diagnosis has not helped.

  Y at - it a solution to the problem for example force Windows to display the password prompt.

  Thank you

  Sanjay

  Hello, Mr. Ray,.

  Thanks for posting your query in Microsoft Community.

  I understand that, even after be connected to the network once chosen, no internet is available. Generally, you are asked the password for the first time and the next time when you try to connect to the same WiFi network, it connects automatically without the password. However, there are several other reasons for not being able to access the internet thought that the device is connected to the same network successfully.

  I suggest to refer to the article below and check if the problem still persists.

  Wireless and wired network problems

  If the problem persists and you try to use the Wi - Fi connection in the hotel and office, this network would be connected to a domain or has administrator privileges. This is why I would recommend posting your query in the TechNet forums as your question would be better suited for IT Pro audience.

  Please post your question in the TechNet Forums.