Setting up VPN connection.

Similar Questions

• How to set the VPN connection in Windows 7 64 bit?

  Hello

  How can I set up a Vpn connection in Windows 7 x 64 bit.

  Thank you.

  Hello

  Go to the network control panel and Internet-network sharing Center.

  http://www.windows7hacker.com/index.php/2009/08/how-to-set-up-a-VPN-connection-in-Windows-7/

  Note that you need to know the login and the password to access the Internet :)

• VPN connections are suddenly trying to connect through a non-existent modem instead of wireless.

  I have several set up VPN connections that I use for a few months. Today, I tried today to connect to one of them and realized that the dialog box connection said dial instead of connect. It is now trying to connect through a modem, which I don't have.

  I deleted the VPN configuration and set up a new, but I get the same thing. When I go into the properties of the VPN connection, for 'connect using', he says 'deleted Modem - (unavailable device). There is no option to select the appropriate device.

  I have no idea what this happened, but I connect now connect to any VPN because they all are trying to use this modem that does not exist. I can connect to the Internet fine. I can connect to the thin wireless networks. It's just the VPN connections.

  Open IE and make sure the box never establish a connection isCHECKED.

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/Neverdialaconnection.PNG

  MS - MVP Windows Desktop Experience
  "When all else fails try what the captain suggested before you started...". »

• Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall

  Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall, waiting for quick reply

  Hi cmscan,

  Thank you for using communities of Apple Support.

  I see that you add a VPN connection using IKEv2, but you do not have the remote ID. I know it's important to be able to set up a virtual private network, you can connect using your iPhone. I'm happy to help you with this.

  You must contact your system administrator to ensure that the settings that you must configure the VPN connection. Please see the iPhone user Guide for more information.

  Have a great day!

• VPN connection: An unexpected error has occurred.

  I am suddenly unable to get my built-in VPN connection works on my iMac with OS X 10.11.5.  I get the VPN connection message: an unexpected error has occurred.  I have been using this VPN configuration to connect to work for several months with success.

  But last week (and I do not know if it had nothing to do with it), I went on vacation and used a free wi - fi setup of Tim Hortons.  I had a LOT of trouble getting the next login page, and I checked all playing with different settings of network without success.  When a change did not work, I put it to its original setting.  Finally, I learned to use Safari to access the free WiFi connection page of Tim.  Then once connected, everything was OK.

  But when I returned a week later and if necessary, to start my VPN connection to access the work, it wouldn't start.  I checked and recheck all my settings preferably of different network, but did not find those who were wrong.  I even deleted and re-entered my VPN service definition without solving the problem.

  Thinking that the problem could be the newly installed ISP of Bell equipment (we went from Rogers while I was away), I used my BlackBerry smartphone (issued by my employer) to create a wi - fi hotspot and accessed to the internet using this connection which completely ignored my home ISP equipment.  But still, I was unable to establish a VPN connection.

  I then tried my iPad VPN connection, and it worked!  Then, I defined a VPN service on the iMac to my wife and the iMac to my daughter and was able to successfully establish a VPN connection to my work very well, using exactly the same VPN configuration.  This led me to the conclusion, it was a problem on my iMac (and not with my new ISP or VPN system of my work that had none of the changes you made), but I still can't find what is "broken".  I run Onyx for my iMac OS X 10.11.5 and repaired permissions and clean the cache and all the rest she is doing to "solve" problems.  But the problem persisted.

  Is there a preference file corrupted somewhere (scan option is no longer on the current version of the Onyx for a reason any)?

  I still have a network setting wrong somewhere I need to go back to the system is correct value?

  Here is the attempt to VPN from the file system.log (with some hidden values in the case where they display my work VPN access):

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: received an order to start SystemUIServer [257]

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: changed to connecting status

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: phase 1 of the IPSec from.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: agreed to the takeover of vpn connection.

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: connection.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec Phase 1 started (initiated by me).

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: bind 1 (cannot assign requested address)

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: sendfromto failed

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: Phase 1 negotiation failed due to the error of sending. 94437eb7d5b1b6e8:0000000000000000

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: can not send packets

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IKE Packet: send failed. (Initiator, aggressive Mode 1 Message).

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: Controller IPSec: IKE FAILED. Phase 1, assert 0

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed by disconnecting

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec disconnection from the server 142.201.5.6

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec disconnection from the server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 3 times-

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed to offline, terminus right no

  Any help or insight would be more useful and appreciated... so that I can work from home again.

  Thank you

  Myron VanderLaan

  I finally found my VPN problem.

  There is a 'racoon' file that is generated when I connect to the VPN to my work site.

  I have created a modified version of this file so that my connection does not expire in 3600 seconds (changed in 24 hours).

  Apparently, there are some slightly different settings (such as certain IP addresses other than VPN IP of my work) in this file under our new ISP Bell from the former FAI Rogers.

  And if I connect to the WiFi Hotspot from my BlackBerry, it does not once again because these settings in the file are different again.  I must return the file generated instead of my modified file.

  Bad luck!

• Cannot change network over the VPN connection components

  Hi all

  I set up a VPN in windows XP Service Pack 3 with all latest updates.  When I display the properties of the VPN connection, there is a tab labeled "Networking".  When I click on the tab networking that I get an error message pop up that says: "Unable to allow the editing of networkingcomponents at the moment because they are being modified elsewhere."  I restarted and also tried to search and stop the services dealing with virtual private networks, etc. nothing works.

  Can someone help me troubleshoot or identify what prevents me to change my network layout tab?  There is virtually no information on the internet addressing it.

  Thanks in advance!

  Hi Amish_Robot,

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry 10 auto-configuration VPN connection on Wifi networks

  Dear all

  Soon-to-be owner of a Z10, I try to have a smooth start once it arrives. How would I go about establishing an automatic VPN connection to connect to certain Wifi (public, non-free)? Is it still possible?

  The VPN connection offer me free access to these networks, but it is quite annoying to always have to manually open the VPN when one of them is in scope.

  Thank you, Florian

  Hi floriparate and welcome to the community of BlackBerry Support Forums!

  Settings > network connections > Wi - Fi > saved, select the saved network and then add the VPN profile to configure auto-connect when it is connected to this network.

  This article will provide more information on the creation of a VPN on your BlackBerry Z10 profile.

  KB13469 - setting up a VPN profile on the BlackBerry smartphone

  Thank you.

• How to create a vpn connection

  I know that this discussion has already been posted long ago, but please help me to make this thing work. I have an assignment topic security [in which my subject are vpn] and have a presentation must undergo. I want to create a server vpn on my laptop running windows 7 and my partner's cell phone running windows 8, join. is it possible to do? Please help me through all the steps I tried this on my own using all the steps provided on the internet but ended up with my laptop friends fail to connect. Thanks in advance to the contributors of this community to guide me.

  Hi Alex,

  Welcome to the Microsoft Community Forum.

  I understand that you have a problem with setting up VPN between two computers.

  Unfortunately, the issue you have mentioned on here is best suited for the Microsoft TechNet community, so I suggest you the same post in the Microsoft TechNet forum for further assistance on this issue.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Thank you

• RV180 VPN connects and allows you to browse the files, but falls when opening a file.

  Last week, we received our 300Mbps fiber connection. We bought the RV180 due to its high performance, and he manages the speed perfectly.

  However, when you set up VPN, I encountered a strange problem.

  Establishing a QuickVpn or PPTP is simple and connection is no problem. But I'll be fine. I can communicate with QuickVpn or PPTP and find a NAS or PC directory structure, but when I try to open a file the VPC connection drops.

  I activate the remote management.
  I can ping google.com f-l 1472 without fragmentation, so a WAN MTU of 1500 should be ok.
  I have tried disabling attack prevention firewall.

  I have install the following experience: the firmware update (1.0.2.6), restore the default settings.

  Set up the RV180 as follows:

  IPv4 WAN (Internet)

  ------------------------------------------------------------------

  Internet connection type: Automatic Configuration - DHCP

  DNS Server Source: Get dynamically for ISP

  MAC address of the router: use the default address

  IPv4 LAN (local area network)

  ------------------------------------------------------------------

  Host name: RV180

  IP address: 192.168.75.1

  Subnet mask: 255.255.255.0

  Mode DHCP: DHCP Server

  Domain name: LCDVT

  From the IP address: 192.168.75.100

  End IP address: 192.168.75.254

  Rental time: 24

  DNS Proxy: enable

  Preventing attacks

  ------------------------------------------------------------------

  WAN (Internet) security controls

  Meet Ping on WAN (Internet): disabled

  Stealth mode: disabled

  Floods: disabled

  LAN (local area network) security controls

  Block UDP Flood: disabled

  Parameters of the ICSA

  Block the anonymous ICMP Messages: disabled

  Block fragmented packets: disabled

  Block multicast packets: disabled

  VPN users

  ------------------------------------------------------------------

  PPTP server: enabled

  From the IP address: 192.168.75.50

  End IP address: 192.168.75.99

  Table setting VPN Client:

  ---------------------------

  No: 1

  Enabled: enabled

  Username: lcdvt

  Password: *.

  Allow the user to change the password: NA

  Protocol: PPTP

  Web access

  ------------------------------------------------------------------

  Access on the LAN of HTTPS Web Interface: enabled

  Remote management: enabled

  Type of access: IP range

  Start of range: 192.168.75.1

  End of series: 192.168.75.254

  Port number: 443

  Remote SNMP: disabled

  The rest of the menu options are, except for logging policies where I have everything turned on by default.

  In this experiment, I connect from a remote location, start navigating among directories of the drive without any problems and then open a file, after which the VPN connection falls (or some process breaks down). After the transfer of a few 100 KB blocks the VPN connection.

  Error logs

  ------------------------------------------------------------------

  Thu Mar 20 00:39:18 2013(GMT+0100) [rv180] nimfNetIfaceTblHandler [System] [NIMF]: could not get LedPinId

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] IP: 62.45.238.236

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] BCAST: 62.45.239.255

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] subnet: 255.255.254.0

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] GW: 62.45.238.1

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] DNS1: 62.45.45.45

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] DNS2: 62.45.46.46

  Thu Mar 20 00:39:25 2013 (GMT + 0100) [rv180] [System] [PROGRAM] Interface: eth1

  Thu Mar 20 00:39:32 2013(GMT+0100) [rv180] nimfNetIfaceTblHandler [System] [NIMF]: could not get LedPinId

  Thu Mar 20 00:40:58 2013(GMT+0100) [rv180] nimfNetIfaceTblHandler [System] [NIMF]: could not get LedPinId

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] IP: 62.45.238.236

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] BCAST: 62.45.239.255

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] subnet: 255.255.254.0

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] GW: 62.45.238.1

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] DNS1: 62.45.45.45

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] DNS2: 62.45.46.46

  Thu Mar 20 00:41:10 2013 (GMT + 0100) [rv180] [System] [PROGRAM] Interface: eth1

  Thu Mar 20 00:41:19 2013(GMT+0100) [rv180] nimfNetIfaceTblHandler [System] [NIMF]: could not get LedPinId

  Warning logs

  ------------------------------------------------------------------

  Thu Mar 20 00:39:13 2013(GMT+0100) [rv180] [System] [DHCPC] dhcpcDisable: removed dhclient.leases

  Thu Mar 20 00:40:54 2013(GMT+0100) [rv180] [System] [DHCPC] dhcpcDisable: removed dhclient.leases

  Sat 1 Jan 01:02:43 2011 (GMT + 0100) [rv180] [Kernel] [KERNEL] [23.090000] /home/aruns/rv180w/updated_dec19_final/beta-v1/rv180w-common/comps/gpl/ipset/src/ipset/kernel/ip_set.c: ip_set_create: no type set 'nethash', 'setPublicNet' has not created value

  What I am doing wrong? Or the device?

  I am interested in what the solution to these problems.  Research on get a rv180...

  First car of Huntsville and bike e-magazine: www.huntsvillecarscene.com

• IGMP over a VPN connection.

  I have a Site 2 Site VPN set up from my office to my home. One of my applications use multicasting to communicate with a server on the other side of the VPN. Is there anyway that I can enable IGMP on my VPN connection?

  In the Direct Encapsulation IPSec IPSec does not support multicast

  In order to obtain the multicast enabled on VPN, you must use the GRE

  Please visit for more information:

  http://www.Cisco.com/application/PDF/en/us/guest/NetSol/ns171/c649/ccmigration_09186a008074f26a.PDF

  M.

  Hope that helps the rate if it isn't

• Monitoring VPN connection attempts

  I would like to be able to use the syslog messages that are detached from the ASA to monitor VPN connection attempts (successful or not). Looking at the posts system there are several codes that relate to this.

  I wonder if anyone has a good way to use syslog to do this? There are some codes that can be used for this information?

  Thank you.

  You can set the ASA to send syslog messages when the user connects and disconnects. There are a few types of 'remote access' as IPsec VPN, webvpn / without client anyconnect/ssl vpn client that you can follow.

  If you are using Clientless SSL VPN syslogs usually begin with 716xxx.  For example the syslog for connect is 716001 and disconnect is 716002.  There is a list of other Clientless VPN SSL related messages here. You can view the specific contents of each journal here:

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsg

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4776913

  If you use SSL VPN Client (SVC1.x, AnyConnect 2.x) syslogs usually begin with 722xxx. For example, the syslog for connect is 722022 and disconnect is 722023. There is a list of other customer VPN SSL related posts here

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsg

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4778697

  If you use the IPSec VPN client, you can follow a success to connect with 713119 (indicates the phase 1 completed), 713049 (indicates the complete Phase2) and disconnect with 113019. There is a syslog ipsec additional 713049 that you can follow for ipsec.

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4775678

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4775412 http://www.Cisco.com/en/US/docs/Security/ASA/asa80/System/message/logmsg

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logmsgs.html#wp4769539

  Here are some other notes to keep in mind:

  -You can tell that the logging levels you currently have on the command line ASA with 'show log '.

  -Newspapers that you send to a syslog server are controlled with the commands "Logging Trap". For example 'logging trap information' (level 6) or "trap alerts logging" (level 1)

  -You can tell what level of severity (i.e., alerts, critical, errors, warnings, notifications, informational, debug) each one connects through this link. As you can see by checking the link, those follow-up sign in or out as I've mentioned above are usually information (sev 6)):

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logsev

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/system/message/logsevp.html

  -If you want to create a specific subset of the syslogs to send to a specific device, you can do it with a class or a list of logging:

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/m

  For example (class log):

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/m

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/monitor.html#wp1065253

  class check vpnc informational FRT

  For example (list of logging):

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/monitor.html#wp1065512

  log list mylist message 722022

  log list mylist message 722023

  logging trap mylist

  Don't forget to evaluate the positions that helped you and to mark it as resolved if you question has been answered.

  -heather

• Change the name of the connection of an existing VPN connection

  I set up a VPN connection and that it has received a generic name of LAN 2 or something similar, but to access my link remote desktop to my desktop, I need call in this regard a particular name, i.e. of OpenVPN. How can I do this as the parameter of change tab has nothing to change the login name.

  Maybe try this:

  Open > network and sharing Center > view home, left click on it

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• WRVS4400N with AG300 and VPN connections

  I bought a WRVS4400N router hoping to add wireless and VPN capability at a remote office LAN. I want to be able to establish a VPN connection from my PC to the central office to the WRVS4400N to remote desktop, access and administer systems at the remote office. Remote desktop systems is unnecessary access to systems to the central office.

  Before you deploy the WRVS4400N to remote desktop, I'm stable and by configuring it to our central office.

  Our central office is a router Linksys AG300 and ADSL service for Internet connection. It works well and I don't want to change it.

  I have connected the WRVS4400N to our central office LAN and it has an IP address on its WAN port assigned by the DHCP server on the AG300.

  What I do not understand how to establish a VPN connection to a system on the Internet at the WRVS4400N on the local network. I have a laptop with the QuickVPN software installed. If I connect my laptop to the AG300 (i.e. the same switch as the WAN port on the WRVS4400N) I can establish a VPN connection to the WRVS4400N but if I connect to my laptop to the Internet (via my ADSL service at home), I am unable to set up the VPN. I don't know how to configure the AG300 so that the VPN from my laptop reaches the WRVS4400N.

  I transfer ipsec enabled on the AG300, but this does not seem to run the VPN with the WRVS4400N.

  Can someone tell me what I need to do?

  Is there some other DSL modem I could use that facilitates the connection? There is another DSL modem (I don't know make/model until I visit the site) used in remote desktop, but I could replace it if I knew that the replacement work.

  Update: I got it to work. See https://supportforums.cisco.com/thread/2108785 for the advice that has been most useful.

  The essential steps have been before the ports indicated in this article (and UDP 500) to the WRVS4400N and I dropped a bit of the MTU (do not know if this was really necessary). Now I can establish connection QuickVPN, except when the Windows Firewall interferes.

  Hello

  Thank you for posting. In the AG300, transmit the following ports to the IP address of the WAN WRVS4400N port: 443, 500, 4500, 60443. This allows you to establish a QuickVPN for the WRVS4400N using the WAN IP of the AG300.

• ACS seems to forget IPs assigned to VPN connections

  Hi, I hope I am posting this in the right place and give the illusion that I have a pretty good idea of what I'm talking about. Otherwise, I apologize and would be recognizing all relevant entry.

  My problem is that after authenticating correctly to ACS/RSA, VPN users receive a correct of the Pool of IP in their respective IP address, but GBA seems to forget that the IP address was assigned after a while so, for example, it shows 0 assigned IP address when the firewall reports that there are 4 active connections. What will happen inevitably, is that someone will eventually get assigned to an IP address previously assigned to an already existing connection, causing 0 connectivity on the network to the VPN user.

  I assume this is a failure of communication between the firewall and the ACS in terms of which connections are still alived and IPs should be available.

  Can someone idea me in mechanisms to interact the ACS and the firewall with regard to connection information active any experience or knowledge with this problem or maybe?

  Thanks in advance.

  
  Thank you for the response. It is currently set for 2 hours, but I guess I'm confused as to some of the terminology in regards to it releasing IP addresses not in use.
  For example, if there is a valid VPN connection for 4 hours, it seems that the ACS will recover the IP after 2 hours, so does that mean 2 hours in, the IP will get re-assigned regardless? Or is there supposed to be some mechanism in place that says the connection is still valid so the IP is kept assigned beyond the 2 hour period?
  Thanks again.
  

  Hello

  I do not think that there is a mechanism if ACS provides to the client the ip address, but yes, you can adjust the time of realease. I suggest you make time to 5-6 hours, we set up in our data center, the time is so great, it's the fact is that the user may not work for more than contnous for 5 to 6 hours if at all then connection will break and once agin it will be assigned to the new ip address once the user connects. It won't be problem in the normal network.

  Hope to help

  So useful don't rate

  Ganesh.H

• VPN connection with external modem

  Cisco 2651XM router

  using a wic adsl card I was able to establish a vpn connection from a computer on to my 2651xm router cisco vpn client successfully, but I can't get a connection using an external modem.

  My local network at the end of the vpn server is on 172.16.1.xx and goes into the router on f0/0, which stood at 172.16.1.30.

  Port f0/1 is 192.168.1.100 and goes to an external modem set as default gateway

  192.169.1.254. with this configuration I can surf the internet on the computers in the lan at the server end.

  Problem is that I can't get a connection from a remote machine VPN connect. It worked when I used the wic adsl connection, but then I used only

  the port of f0/0 that was connected to my local network. But now I'm including the f0/1 port to connect to an external modem, vpn client cannot connect. The cisco vpn client tries to connect by using tcp on port 10000 and I have to configure it in the modem, but do not know if I did it correctly. I tried to transmit the port both 192.168.1.100 (f0/1) and 172.16.1.30 (f0/0), but neither will not work. My config running is attached. Thanks for the pointers.

  ----------------------

  #show running-config router

  Building configuration...

  Current configuration: 2757 bytes

  !

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  vpn hostname

  !

  boot-start-marker

  boot-end-marker

  !

  no set record in buffered memory

  no console logging

  enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxx

  activate the password xxxxxxxxxxx

  !

  AAA new-model

  !

  !

  AAA authentication login default local

  AAA authentication login sdm_vpn_xauth_ml_1 local

  AAA authentication login sdm_vpn_xauth_ml_2 local

  AAA authorization sdm_vpn_group_ml_1 LAN

  AAA authorization sdm_vpn_group_ml_2 LAN

  !

  AAA - the id of the joint session

  !

  resources policy

  !

  no location network-clock-participate 1

  No network-clock-participate wic 0

  IP cef

  !

  !

  !

  !

  name-server IP 192.168.1.254

  name-server IP 192.168.1.255

  IP ddns update method sdm_ddns1

  DDNS both

  !

  !

  !

  !

  !

  username secret xxxxxxxxxxx 5 xxxxxxxxxxxxxxxxxxxxxxxxxx

  !

  !

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group workgroup

  vpnkey key

  pool SDM_POOL_2

  ISAKMP crypto sdm-ike-profile-1 profile

  match of group identity working group

  client authentication list sdm_vpn_xauth_ml_2

  ISAKMP authorization list sdm_vpn_group_ml_2

  client configuration address respond

  virtual-model 2

  !

  !

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac

  !

  Profile of crypto ipsec SDM_Profile1

  game of transformation-ESP-3DES-SHA1

  isakmp-profile sdm-ike-profile-1 game

  !

  !

  !

  !

  !

  ATM0/0 interface

  no ip address

  Shutdown

  No atm ilmi-keepalive

  DSL-automatic operation mode

  !

  interface FastEthernet0/0

  IP 172.16.1.30 255.255.0.0

  IP nat inside

  IP virtual-reassembly

  automatic speed

  Half duplex

  No mop enabled

  !

  interface FastEthernet0/1

  Description $ETH - WAN$

  updated client dns IP dhcp-server no

  IP ddns update hostname vpn.vpn

  IP ddns update sdm_ddns1

  dhcp customer_id FastEthernet0/1 IP address

  NAT outside IP

  IP virtual-reassembly

  automatic duplex

  automatic speed

  !

  tunnel type of interface virtual-Template2

  IP unnumbered FastEthernet0/1

  ipv4 ipsec tunnel mode

  Tunnel SDM_Profile1 ipsec protection profile

  !

  router RIP

  version 2

  network 172.16.0.0

  network 192.168.1.0

  No Auto-resume

  !

  local IP 192.168.1.110 SDM_POOL_1 pool 192.168.1.120

  local IP SDM_POOL_2 172.16.1.21 pool 172.16.1.29

  !

  !

  IP http server

  no ip http secure server

  IP nat inside source list 3 interface FastEthernet0/1 overload

  !

  Remark SDM_ACL category of access list 1 = 2

  access-list 1 permit 172.16.0.0 0.0.255.255

  Note access-list 2 = 2 SDM_ACL category

  access-list 2 allow to 192.168.1.0 0.0.0.255

  Remark SDM_ACL category from the list to access 3 = 2

  access-list 3 permit 172.16.0.0 0.0.255.255

  !

  !

  !

  !

  control plan

  !

  !

  !

  !

  Line con 0

  line to 0

  line vty 0 4

  password: xxxxxxxx

  !

  !

  end

  Hello

  On the ADSL Modem, you must before 500, port 4500 UDP and 10,000 to the IP address of the router.

  Basically, tell you the Modem to 192.168.1.100 transmitting any packet received on 192.169.1.254.

  On the client VPN choose encapsulation UDP NAT, make use of NAT - T standard.

  Please rate if this helped.

  Kind regards

  Daniel