setting up wrt150N as access point

Similar Questions

• can I use a laptop to set up a wifi access point?

  When I first received a laptop of opportunity in last December, a colleague tech at my night school mentioned that I didn't have to buy a 803,11 access point device to plug my switch, but I rather use a WiFi card on my computer to create my own access point. I told him I have such a card and put a little out of my mind.

  However, I have someone outside to spend the night at my place, and he needs to check his e-mail. Unfortunately, it seems that the RJ-45 socket on his laptop is broken, I have tried several cables and impossible to get a connection, including the cable to connect the computer I'm using now.

  Is it possible that I can use ICS on XP Pro (preferred) or Vista 32 bit Home Premium (really want to use it, I have never set the boot loader after the upgrade to XP on a separate partition, especially because XP has worked so much better) to set up enough connectivity for him to connect to the mail server?

  Should I Windows 7 or Vista to do this? I know how to do the reverse quite easily (share Wi-Fi on the Ethernet port), but I don't know how to set up the SSID and others. I would assume same WEP or WPA2 (Yes, I know how it is easy to crack, but it's better that transmitting passwords in clear text because it discourages occasional interception) would too, so it will accept a connection open, unencrypted. I'll just close access once it does.

  How could I go to set it up? I'm not spending money on software that is not free for one night, one-shot deal. Kiss, I just need a connection of bare bones for him. If its Ethernet port was working, I would leave him to plug my switch, but since it's not I need to create a gateway using what material I have on hand, and the only device with any kind of ability 803.11 is my own laptop.

  I know it's possible, I don't know if this is something only Linux, or a solution that requires 3rd party software.

  Yes, you can use ICS.  See http://practicallynetworked.com/sharing/xp_ics/

  I forgot to include this--> http://www.home-network-help.com/ad-hoc-wireless-network.html

  You will need to configure security manually from the properties of maps dialog box wireless (on both computers) and IIRC, you can use WEP in ad-hoc XP networks.

  Go to the correct place
  Right click on the wireless adapter icon and select Properties
  Click the wireless networks tab
  Click Add to create a configuration
  in the 'Association' tab, set the SSID, network authentication 'Open' and WEP data encryption.
  It's been so long that I made that I remember exactly, but I think you can use only the 10 digit Hex key.

• Set up the wireless access point, but the wireless devices are unable to get ip address

  Hi, I wanted to put my D7000 as router AP. My main router is Sagemcom F@st 3864 by Optus ISP (Australia).

  First of all, I put the D7000 in Bridge mode I did these steps:

  1. replace the IP LAN 192.168.0.100

  2 disable DHCP

  3. connect the LAN port to the main router Lan port

  Internet connection wired and wireless on the same device but other wireless devices has failed

  To remedy this, I made another choice, allowing point-to-point wireless access in the advanced settings of the D7000. I followed the instructions from this link

  http://KB.NETGEAR.com/app/answers/detail/A_ID/24104/~/how-do-i-change-my-Nighthawk-router-to-AP-mode...

  I put dynamiccaly = wireless internet cable success but peripheral does not have an ip address

  No idea how to fix wireless? I'm not very experienced

  Thank you!

  I just fixed it just now. For AP mode, connect the LAN port of the main router to the WAN port on the D7000 (not LAN to LAN). I wish I thought to it much sooner.

• MIB for channel RF/setting read on autonomous Access Points

  Hei everyone.   Does anyone know if there is a channel RF of SNMP mib sfor reading/setting and other RF settings on stand-alone 1131AG Accesspoints. In my network, we use "less congested frequency" choice for the selection of the channel and wants to be which is the result of this.

  Best regards, Roy

  "Less populated frequency" does not... be together your AP to a specific channel or put in evidence that channels 1, 6 or 11.  You can use a mib to seethe list mib browser... This migh link... help tram know if its different from the 1131AG:

  http://www.oidview.com/MIBs/9/Cisco-dot11-if-MIB.html

• Implementation of access point with WRT54GL

  Hi all

  I am very new to this wireless networking thing.

  I'm having some trouble with my wireless router.  My ISP gave me a wireless Huwaei modem but I live in a two-story apartment and modem from the ISP plays well on the second floor, the signal is very weak.

  My problem here is that I am trying to use my router to broadcast the signal to the floor.

  Is it possible to set up an access point with my Wi - Fi router?

  My idea is that the router would be placed in another part of the apartment and clone the signal from the modem wi - fi and move this signal. I want to place the wireless router in the second floor.

  Such an action is possible?

  Thank you very much for your help.

  You can set the WRT54GL as Access Point, both your two routers must be wired to the other...

  To make the two routers are wireless, is not not possible.

  For both routers works between them, connect the Ethernet cable between the LAN Port of your Modem to the Lan 1 Port on the Linksys router. Click here and follow the instructions how do your Linksys router works with your Modem.

• Ports Ethernet in router wireless set up as access point

  If I set up a wireless router as a wireless access point, can I still connect to the Ethernet ports on the router?

  Yes.

• Configure a wrt320n and wrt150n as a wireless bridge or access point

  Hello

  I have a question: I would like to connect my old wrt150n as an access point on a different floor of our House because of a bad signal to the second floor of the wrt320n.

  Is a cable modem connected to the wrt320n. I would like to connect wrt150n wireless to the wrt320n, so children can connect to their computer for the wrt150n wireless...

  Is it possible to configure?

  THX in advanced, Peter

  No, it is not possible... Router Linksys will not communicate wirelessly with another router.

• Setting up roaming with 1300ag access points

  Hello

  I have been give two 1300ag access point to set up

  I was asked to make sure that customers can place a PSA without disconnecting from the network (roaming is the right term?)

  I was told that I need to put the same SSID and different channels on two access points

  I doesn't seem to work.

  What else needs to be configured?

  Thanks for any help

  The APs owe me locayed so that... you should be able to detect the wireless signal between access points... should not be a coverage GAP between access points...

  Exam...

  > Scope of coverage should not be as below...

  AP1                                                              AP2

  <----------------------------------------------->                 <-------------------------------------------------------->

  <--------------->

  no overlap of signal

  > Scope of coverage should be like this...

  AP1

  <----------------------------------------------->AP2

  <-------------------------------------------------------->

  <---------->

  signal overlap

  This can be done by installing the AP on the roof and then around homelessness. or even not by any software survey site Cisco ACU or ADU.

  Concerning

  Surendra

• How to set up a connection using a Toshiba Satellite C655D-S5508 mobile access point?

  How to set up a connection using a Toshiba Satellite C655D-S5508 mobile access point? I am trying to connect a Samsung Galaxy stellar and receive an error page indicating that the DNS search failed. I do not know how to set up my computer, I have the wireless power and know how to connect to the hotspot from the phone. The phone is able to recognize the computer and its IP address, and the computer recognizes the phone and tries to connect but then displays the error message "DNS search failed.

  Any help would be great!
  Raquel

  Hi Raquel,.

  Do you have any security program installed on the computer?

  I suggest to go through the steps from the link provided and check if it helps.

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/is-is/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  You can also consult the manual of the computer for the same and check.

  If the problem persists, you can also contact manufacturing for known problems:

  Support.Toshiba.com

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Hope this helps and let us know if you need more assistance.

• Error message 'Please select the access point or wireless router to set up' when you set up a network

  Original title: set up a network.

  I want to create a wireless network for the games, and when I click on the network. A screen comes written on this "Choose the access point or wireless router to set up" and that "it might take 90 s for devices reconfigured to appear on your computer.

  But no device never appears below it, even after 90 minutes.
  Please help me with this.
  It was so easy in windows 7.

  Hi Manas,

  What is the brand and model of the Wireless Router/Access Point?

  Given that the issue has not persisted in Windows 7, there is a chance that the wireless router/Access Point is not compatible with Windows 8.

  Please check the links below on the implementation of a network.

  http://Windows.Microsoft.com/en-in/Windows-8/Setup-home-network

  http://Windows.Microsoft.com/en-in/Windows-8/what-you-need-Setup-home-network

  http://Windows.Microsoft.com/en-in/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

  http://Windows.Microsoft.com/en-in/Windows-8/Add-device-or-PC-to-network

  Answer please if you have any questions.

• Set up home network of multi access point

  Recently, I cut the string so to speak with directv and is passed to a streaming cable through view PlayStation. However this left me with a little slower network I want to. I have a 3-storey house in a crowded area and my cable modem is on the lower floor.

  Currently, I have a linksys ea3500 connected to a modem cable in the basement. I have a family room on floor 2, where I connected PlayStation. On the third floor, I have a Roku in the bedroom for live tv broadcast and also a Home Office.

  I can work around 70mbps down when connected via Ethernet to the ea3500 on the ground floor, but a signal wirelessly on the second floor is about 25mbps down and falls to 15 or so away on the third floor.

  I ordered a new router (wrt 1900ACS) and also a netgear powerline 1200 kit. My plan is to connect the line adaptor to the ea3500 and place another line on two ground adapter. To which I would link the wrt 1900 and run as an access point for the existing network. I would also link the PlayStation to the wrt1900 through cat 5 to improve the reliability of the connection.

  My hope is that this will greatly increase my speed of download available in the House. We are connected fairy and at any time have probably 10 to 15 devices (tablets, phones, laptops, TVs, desktop, nest, etc.)

  Given my current gear (and the warning that I won't have to run wires through the wall or through the vents) is the configuration I describe the best way to increase the signal strength and bandwidth bandwidth/speed? Does it matter if I use the new wrt 1900acs as a slave to the ea3500, since it will be connected via the power line to the ea3500 lan port? Should I just unplug the ea3500 and only use the 1900acs on the Middle floor and connect the power supply line direct adapter to the cable modem?

  Any idea to my plan or recommended changes to my plan would be appreciated!

  It's good then let the EA3500 and add the WRT1900ACS in via PowerLine Bridge Mode.

• DHCP option to set the controller IP for Access Points (Airespace)

  Hello world.

  Does anyone have an idea to specify the controller using DHCP options.

  We use:

  -Controller AIR-WLC4404-100-K9

  -AP-1010-AP-5312 poinst access

  -Server dhcp DHCPd ISC 3.0.1

  Newspapers on DHCP server indicates that access points become the IP addresses, but the controller information are not "read" / "included".

  In the productive environment, controllers will be redundant.

  So far, we couldn't sucsessful with eighter of these configurations:

  Block i. using VTL:

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/products_quick_start09186a00805100f5.html#wp49287

  subnet 10.50.107.0 netmask 255.255.255.0 {}

  option subnet-mask 255.255.255.0;

  routers option 10.50.107.1;

  option domain-name-servers 10.20.51.11, 10.20.51.12;

  option vendor-class-identify Airespace 1200;

  the option dhcp-client-identifier 0xf1, 8, 10.20.51.254, 10.20.51.249;

  DDNS-updates

  DDNS-rev-domainname "in - addr.arpa.";

  DDNS-domain name "xxyy.local.";

  default-lease-time 28800;

  range 10.50.107.101 10.50.107.200;

  }

  II. using the DHCP Next-Server option:

  subnet 10.50.107.0 netmask 255.255.255.0 {}

  option subnet-mask 255.255.255.0;

  routers option 10.50.107.1;

  option domain-name-servers 10.20.51.11, 10.20.51.12;

  Next-server 10.20.51.254;

  III. use of Header Information Option 43 described such in DHCP Manual:

  WLAN-apc code 60 option = text;

  ip address wlan code option 43 = controller;

  subnet 10.50.107.0 netmask 255.255.255.0 {}

  option subnet-mask 255.255.255.0;

  routers option 10.50.107.1;

  option domain-name-servers 10.20.51.11, 10.20.51.12;

  option wlan-apc "Airespace.AP1200"

  option wlan controller - 10.20.51.254;

  IV. using header to the DHCP server information:

  class "-classes of suppliers ' {}

  vendor-class-identifier option match; }

  {"Airespace.AP1200" subclass "-classes of suppliers '}

  Next-server 10.20.51.254;

  }

  Does anyone have a working (using the SAI?) configuration or advice?

  Best regards

  Jarle Steffensen

  Yes, finally got it work.

  I just followed this guide:

  http://www.Cisco.com/univercd/CC/TD/doc/product/wireless/control/C44/DEP.PDF

  and it worked the first time :)

• How to set up the access point 1602 I just bought

  Hello world

  Hope you can help. I just bought an AIR-SAP1602I-A-K9 with an internet provider. With her, I also bought a power injector. I tried to use it as a standalone AP. It does not come with any instruction, and I'm not good at Wifi config. I hope you can help... My requirement of adjustment is very simple:

  -Create and broadcast the SSID called MYCSL

  N ' not no authentication or encryption. (is this open authentication?... so that people just plug the SSID as the user can start to cruise internet without putting in any key.)

  -The access point does not have a static ip assigned, instead, he gets an IP from one of my dhcp server in the network.

  -How to connect my laptop to configure via web http?

  Can you tell me what should be configured? Although it is a new product from a legitimate retailer... Cisco said that they could not support it without any contract of Starnet... as a consumer... they should give the kind of grace period to support the new products... In any case, hope you can help me out here :)

  I thank very you much for your help in advance.

  Takami Chiro

  Hi Takami,

  Take a look at one of the previous announcement. I would be more similar. Hope this will help you keep started. If you are the kind of things anywhere you please come back the Forum and someone will be able to help you.

  https://supportforums.Cisco.com/discussion/12217126/access-point-air-SAP...

  Hope that helps.

  Concerning

  Najaf

• My Airport Time Capsule can act as a WIRELESS access point

  Hello.

  I brought a Time Capsule with my Mac Pro. It worked well since yesterday.

  I have set up the time Capsule as a WIFI, bypass at my local network access point. There is a router (cable) works at home.

  It's my Mac Pro AirPort Utility and my iPhone, my Time Capsule is displayed with an exclamation point saying "device not found". I can't connect to the disk on this subject by afp share, or smb. Time Machine function is gone too. He failed trying to connect to the share drive from another computer connected to the time Capsule by cable network.

  But at the same time, WiFi works well.

  I tried to recycle energy. Sharing disk will be available. But if I start the Time Machine backup, it will not be a few seconds.

  Any idea?

  Thank you.

  There are several posts here related the issue.

  Luckily, you have set up your new Time Capsule for Back to My Mac (BTMM)?

  If so, the 'temporary' solution is to delete/disable the option of the CCMM, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
  • If you have entries here, select it and click then the minus sign "-" button to remove it.
  • Click on update and allow the base station restart.

  If you have not enabled CCMM, we have other options for you to try.

• Time Capsule bridge and access point?

  Hello

  I have a question about the network wireless of my TC. Our provider has installed a new router. These router can not work as bridge, telephone and TV are also connected to this router. Because 2 wifi networks do not work, I wonder what is the best set-up for the network? The Capsule is connected to the router by ethernet. It is configured as a gateway. Before I used the TC to connect to internet. Now, I have disabled the wi - fi function and use the ISP connection. It looks good, only backups are a little slow now.

  -What is the best configuration for the TC in an existing network? So that I can put it off the wireless of the TC or the ISP router: can I use the TC-wifi (create a new network) or wifi existing ISP router to connect with wireless devices?

  -Do I lose speed when I'm with 2 devices on my network: TC as the ISP as a router and Access Point.

  (I always thought that 1 unit for router and access point is the best configuration.)

  -Are faster backup copies using the TC wireless or it does not matter when I backup on the wireless ISP?

  Some maybe stupid questions, but thanks in advance. Greetings.

  Because 2 wifi networks do not work

  Many people think that this is the case... but this isn't so.

  You can use several wireless networks... all attached to the same router. There is enough bandwidth available in the channels wireless for the operation of 3 different wireless networks nearby each other... and using 5 GHz adds much more.

  The Capsule is connected to the router by ethernet. It is configured as a gateway. Before I used the TC to connect to internet. Now, I have disabled the wi - fi function and use the ISP connection. It looks good, only backups are a little slow now.

  The configuration of TC in bridge is correct.

  Do not turn off the TC wireless... Provide a different name for the ISP wireless router and connect your computer... then you can get internet and make backups on the TC without overloading the ISP router wireless.

  -What is the best configuration for the TC in an existing network? If I disable the wireless of the TC or the ISP router:

  Turn on Wi - Fi in both.

  A physical configuration, it is recommended to have say separation of 1 M (3 feet) between the ISP router and the TC to a min. But it would be even better to have the TC at near the Mac who performs backups TM and related to the ISP router with ethernet.