Setup Distiller question

Similar Questions

• Setup blackBerry questions

  Hello

  I have two questions about how to install an application on the BlackBerry smartphone.

  I developed an application for blackberry that needs to load a configuration file to run it.
  1. I want to know how to copy the configuration file in the folder predetermined during installation of blackberry?
  2. my application has two independent applications, it is possible to group two applications into a single installer of Blackberry?

  Please help us with that?

  Thank you very much!

  Hai

  The installation process does not load anything on the micro SD card.  Instead, your application may check the file and if there are no upload it to a server.

• Setup own question

  Help!  I just reinstall Windows Vista Home Premium.  After that all programs and updates have been brought, the computer shows that the C drive and the dvd player.  There was a second disc with windows install files.  It has now disappeared.  Anyone know what I need to do to get it back?

  Hi banditsbuddy

  Was this disc on the computer when you bought it?

  It looks like a recovery partition that has been installed by the computer manufacturer.

  If this is the case, it is best to leave it alone, because this partition is the only way you have to the system in case of disaster recovery. You can consult the computer's documentation, computer manufacturers, most will provide instructions to create recovery disks for installation in this partition files, in which case the score is never lost.

  Hope this helps

  Ronnie Vernon MVP

• How can I disable the fax?

  When I don't answer the phone instead of going to the fax tone voicemail picks up. How can I disable this?

  Hello

  Click the Setup (the question mark in the middle of the device)

  Scroll to the right until the basic settings Fax is displayed and click OK.

  Scroll to the right until Auto answer appears, and then click OK.

  Change the value to OFF using the right arrow and approve.

• Need help to install BPEL please

  Hi friend
  Good day everyone, I need your support and your help, I want to install BPEL pleaseeeeeeee help me on...
  
  My work done until now and gets the failure...
  
  I put fallow document Crystal Train its good... but the scene atlast I was supposed to for download OSB 11.1.1.3 but but this version was unable to download that, up to now, I decided to go with OSB 11.1.1.4 archived iam...
  
  I have some Question about the installation?
  
  (1) in the Train of Crystal report download OSB came step 12... before to do this, that I have completed 11 steps
  It's
  
  Step1:Oracle Database 10 g Instructions == > DONE
  
  step 2: repository creation utility
  I downloaded and installed
  Repository creation utility (11.1.1.3.3) = > (ofm_rcu_win32_11.1.1.3.3_disk1_1of1)
  
  step3:Oracle Server Weblogic 10.3.3
  I downloaded and installed = > WLS 10.3.3 = > wls1033_win32
  
  Step 4: Oracle SOA Suite 11.1.1.2.0 / / I have downloaded and installed
  Step 5: upgrade to Oracle SOA Suite 11.1.1.3.0 //after SOA 11.1.1.2.0 I've updated SOA 11.1.1.3.0
  Step 6: Creation of the field / / I did the
  
  Step 7: Verify the Installation of the server administrator
  
  Step 8: Verify the Installation of server SOA
  
  Step 9: Verify the Installation of the BAM Server
  
  Step 10: Install JDeveloper / / jdev 11.1.1.3.0
  
  Step 11: SOA Extension for JDeveloper Setup
  
  MY question
  ============
  (1) Ofcourse OSB 11.1.1.3 isn't available, so I don't have any other appointments, I need to download OSB 11.1.1.4
  If want to install OSB 11.1.1.4 What are step I want to change? in the current stage I put fallow
  
  (2) what are the software I want to 'uninstall' of which I have already installed?
  
  (3) that I want to uninstall everything I installed...? no problem I can do...
  
  (4) but for OSB 11.1.14, what are the necessary software... so that I can return to the back of the software instead of download once again
  
  (5) OSB 11.1.1.4 support WLS 10.3.4 I knew that... .so for SOA costumes, UCR, Jdev what are the software he's it supports?
  
  (6) I can't any related document were I can find the steps to install the BPEL process
  
  (7) that I want to move forward
  
  Please share your knowledge... .without me know what can done in my question
  
  Your help will be very appriciable
  
  I hope that the best way to all your guys...
  
  Thanks in advance
  
  Thiliban
  
  [email protected]

  If you try to install this, for the first time, which means that you have not deployed or installed which must be saved, go to just uninstall and install version 11.1.1.4 early.

  To this day, if you read this guide, that you mentioned, feel comfortable with it, try the next, but with the new products. It is almost the same.

  Pablo

• activate the comments and annotations

  Hi all

  We create postscript files and then having the Distiller convert files to PDF format.

  A user of adobe reader 9 attempts to use comments and annotations to write his comments etc...  Until recently when it was upgraded to 9, he can't add comments.

  When I create the PDF file I put no restrictions on that, because I never put safety.

  I checked the properties of Documents and the 'comments' is listed as 'not allowed '.

  This is not the forum to distill. Distiller questions are answered in the forum of Acrobat. This forum is for questions on Distiller Server. To answer your question, Reader users can't add comments unless his comments is enabled by Acrobat to a specific pdf file. It is different from that defined that see you in the properties of the pdf that allows the content creator to ban comments prohibiting the comments for users of Acrobat.

• Install PT8.53 with Linux question: setup.sh can't recreate WebLogic Server PIA

  People,

  Hello. I install PeopleTools 8.53 with the server database Oracle 11 GR 1 material and OS Oracle Linux 5. Data Mover Bootstrap and application designer can connect to the instance of database successfully. About PIA, Oracle Database Server and Application Server Tuxedo11gR1 runs correctly. But when to start WebLogic Server in the opt/PT8.53/webserv/PT853/bin directory, I get an error message like below:

  [user@userlinux bin] $./startPIA.sh

  Its output:

  Try to start WebLogic Server PIA
  No activity will be connected to this window.
  Activity on the server will be connected to /opt/PT8.53/webserv/PT853/servers/PIA/logs/PIA_*
  PID for WebLogic Server PIA is: 5462

  In the direcctory /opt/PT8.53/webserv/PT853/servers/PIA/logs, I run the following command:

  [user@mylinux log] $ vi PIA_stdout.log

  Its release containing the primary error message:

  Another process is using port 80: exception java.net.BindException: Permission denied.

  The 127.0.0.1 address may be incorrect or another process is using port 443: exception java.net.BindException: Permission denied.

  Because I changed the MAX_FILE_DESCRIPTORS from 4096 to 1024 in the file 'setenv.sh', I can't start PIA on the ports lower then 1024 on Linux with a non-root users. I need to recreate PIAS and assign ports like 8000 and 4443. I have remove the PIA installed folder opt/PT8.53/webserv.  I recreate PIA in the directory /opt/PT8.53/setup/PsMpPIAInstall/ as below:

  [user@userlinux PsMpPIAInstall] $./setup.sh

  Its output:

  Select the web server root directory/home/user/oracle/Middleware

  Web server detected version: no choices available

  Error: The web server root directory entered is an invalid or incorrect version.

  Please try again. The version of the required web server is "Weblogic 10.3.

  
  My installed WebLogic directories are /home/user/oracle/Middleware/wlserver_10.3 and /home/user/oracle/Middleware/coherence_3.7 and I run WebLogic Console successfully with http://mylinux.mydomain:7001 / console. I think that the directory/home/user/oracle/Middleware is correct, but it says "no choices available".

  The first time, setup.sh runs correctly. In the second, setup.sh Gets the error above after deleting its previous /opt/PT8.53/webserv file installed.

  My question is:

  Can any folk solve the above problem to make run them "setup.sh" to recreate WebLogic PIA again assign ports greater than 1024?

  
  Thank you.

  See your original thread.

  Continue.

• Questions of the font substitution during the creation of the PS file in Distiller PDF

  I don't know if this post should go under Distiller Server, but he doesn't know if there is a difference between X Distiller and Distiller Server.

  Context: I'm trying to convert postscript on my PC files that come from a single Mac built the program and unfortunately receive the following error message:

  %% [Warning: Helvetica not found, using Font Substitution.] Police cannot be incorporated. ]%%
  %% [Warning: Helvetica-Bold not found, using Font Substitution.] Police cannot be incorporated. ]%%
  %% [Warning: Helvetica-BoldOblique not found, using Font Substitution.] Police cannot be incorporated. ]%%

  When I try to convert postscript fonts to PDF in Acrobat Distiller X substitutes in the Arial font. I have a few versions of Helvetica on my PC but Distiller does not recognize them.

  My question is: How can I know distill, by default, to substitute for Helvetica loaded on my PC rather than Arial so that I have eliminated the error message and get specific pdf.

  Any help would be greatly appreciated.

  Thank you.

  You can use the files in distiller by going to settings.  See these two photos (click on it)

  

  

  I hope this helps.

• Question on Setup on Dell M6600

  Hello!

  IM buying the M6600 Dell and som questions about Setup...

  1 STORAGE

  IM thinking of getting a 128 GB SSD for the OS and programs...

  So im thinking of getting 2 x 750 GB sATA drives (7200). .is is better put those in RAID 0?

  2 CPU

  Intel Core I7-2820QM vs Intel Core I7 2920XM... it is better the extra $ 1000 for the 2920?

  3 RAM

  16GB 1333 MHz DDR3 vs 16 GB 1600 MHz DDR3... what to choose?

  I will be editing video clips AVCHD 1080 p 50 p (panasonic SD600)... this machine will be excessive for work? My only request is to edit the images natively without shutter in full HD resolution...

  Thanks in advance!

  Best regards

  Martin

  Sweden

  Overclocking is no way, the system will be slower than an overclocked system, but there is nothing to do about it. But it does not affect the GPU acceleration. The reason of not not two drives raid0 is:

  1. it doubles the risk of losing all the data.

  2. it is not faster than two separate disks, if it is properly implemented.

  See: Adobe Forums: generic guideline for disk configuration

  For information on the impact of overclocking, laptops against destops, MPE material, see etc.: results of benchmarks

• Satellite A100: question about Toshiba HW Setup utility

  When I try to activate the HW setup, a message is displayed with the message: Gemeinsame Module was finished.
  I thought that a program would guide me through Setup of HW as described in the Toshiba Benutzerhandbuch.

  I wanted to really make are:
  1. I need to plug a second monitor on my laptop today in the evening.
  2. when I hit Fn + F5, my screen goes black. Press Fn + F5 again: screen is normally activated.
  I was expecting to see a box where I can choose the configuration of the monitor. (This happened in the past).
  3. in order to check my settings, as I wanted to use HW to install as described in the Toshiba Benutzerhandbuch.
  Result: See above.
  Can you help me please?

  Post edited by: Smiley

  Hello

  I put t know exactly what it is the sense of shared module, but perhaps that it s often resorted to the module.
  This application is necessary for the good state of different tools of Toshiba.
  In this case, I would recommend reinstallation of this application.

• SG300 Setup question

  Hi and thanks for reading.

  I have 3 sg300 switch/routers, I'm trying to set up and I have a few questions. This is how I have it set up so far.

  SG300 #1 mode layer 3 (router) with spf ge27 connected to our switch through fibers. have set up 2 VLANS (vlan1 10.10.0.1 device ip value) contains all the unidentified ports. (vlan200 ip 172.30.0.30 the value contains the ge27 port). our main hp curve pro is 172.30.0.1.

  second sg300 #2 (layer switch mode 2) a fiber connecting port 10 to 28 of the first sg300 port. This one has 1 vlan with ip defined on 10.10.0.3

  third sg300 #3 (layer switch mode 2) a fibre port connected to the port the second sg300 also with 1 9 vlan, ip device set to 10.10.0.4.

  After you add the declarations of good road to the first device I can ping to all remote subnets and receive answers from one of the devices. everything seems to be working but having a weird problem. I can't device managed on the basis of 2 or 3 (interface) web from anywhere that directly connected to one of the 3 devices. I can handle the device one from anywhere.

  Not sure if it's the correct configuration or what Miss me to be honest.

  Thank you

  On the 2 switch, the switch must have a default gateway specified in order to manage from a different subnet.

  -Tom
  Please evaluate the useful messages

• WLC 5508 w / 1042-initial Setup Question

  I have to do an installation from scratch and was looking for some suggestions as a basis for the configuration. I have a 5508 I have to belay 6509.

  I have to get up 16-1042 model APs.  I will support many customers - scanners of bar codes, phones, iphones and laptops with WPA2.  I have to create 2 local networks without wire - one for DATA and for a hotspot.

  Does anyone have a basic configuration that they can share for both the WLC and 6509 configuration?  Someone at - it a 'from' scratch version doc process they could share?  Someone at - it a version of code recommended?

  I downloaded the 7.0 Configuration Guide but was hoping to get some guideance real world also.

  TIA,

  Amir

  Hello

  Well, from version 7.0, is the last it is good to start from it.

  First implementation of 5508:

  http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70mint.html.

  I advise you to read carefully this section which explains the details and best practices to configure WLCs ports and interfaces.

  Regarding the config guides, I advise you to go through the design guide:

  http://www.cisco.com/application/pdf/en/us/guest/netsol/ns279/c649/ccmigration_09186a00808d9330.pdf.

  And examples of configuration:

  http://www.cisco.com/en/US/products/ps6366/prod_configuration_examples_list.html.

  They are valid for all WLC models.

  They are based on the configuration and very good examples.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Questions about my SG-300-10MP switch Setup

  Hello world

  Thank you very much for your help in advance. I was never in this town before.

  I just got the new SG - 300 switches. My manager has ordered for me. I didn't know how it works so far... not a based IOS. I don't really know how to set it up.

  In any case, I have a switch configured 3750 already in a new site. It has two VLANs, a vlan 11 for PC, and one is for vlan VOIP 320. It has automatic qos works as well. I have installation just a trunk for the new SG - 300 switch.

  Now on the new small switch 300 SG... I have a few questions:

  (1.) I also created two VLAN, it is VLAN11 (for PC), and a 320 VLAN. For this one, I go to the Web-GUI and assign the 320 to the VOICE Vlan. I also changed the CoS at 5 (of 6). Are these ok?

  2.) on port number 9, it's the default trunk, so I add two 11 and 320 to the trunk and leave the other default settings. It's too well ok?

  3.) on a #1 access port, which will be an IP phone, attached with a PC to connect. What I did is to change the mode to Interface Vlan on "GENERAL." Is this fair? I also 'SEE' the box belonging to a VLAN auto voice. And let the Voice VLAN QoS mode such as telephone company Source MAC ADDRESS. I did all these right?

  4.) Finally, for the part of the QoS... Let them default all untouchables - which is the default QoS of Basic... I don't know if it will be fine. I know that the company switch can assign an Auto-QOS command and that he would do all the config itself. Or maybe you mind if you would share your QoS configuration settings?

  I'm more concerned about the parameters in QoS here. Hope you can help.

  Thank you very much.

  Takami Chiro

  Hello

  In the case of the Cisco 7961 (and other phones that support LLDP-MED), you can assign VIRTUAL local network for the phone settings using the LLDP-MED on the switch.

  You have to

  -allow to the vlan VoIP

  -Add MAC YES

  -set the port on vlan automatic voice

  -activate LLDP-MED in the world

  -create a network policy to assign VLAN320

  -assign this policy network on port, the phone is connected to

  Hope this helps,

  Kind regards

  Nico

• Questions about the re-setup

  I have already installed CC of Photoshop and Illustrator CC on my PC (with Windows 8 OS) to the office using CC, but they subsequently uninstalled due to the termination. Now, I found that I can not reinstall them in my PC at home (with Windows 7 as the operating system). What should I do now? Question

  [Read https://forums.adobe.com/docs/DOC-7273]

  [Moved from the living room Forum to forum specific program... MOD]

  Check if Service pack 1 is installed on Windows OS.

  If this is not the case, refer to the link below:

  Learn how to install Windows 7 Service Pack 1 (SP1)

  Then try to install again.

• Questions of Distiller

  When I turn on my computer I get a message that says title: Acrobat Distiller cannot create the temporary file. error: 5 - access denied. I can't save a PDF or print a pdf file. I uninstalled and reinstalled and so far I have nothing works.

  Hey cfilipponi,

  This error occurs generally if there is no permission to the Windows temp folder.

  Please, try these steps and see if they help you:

  • Click Start, type % temp % and press enter
  • Remove all content in the Temp folder, and then restart Acrobat
  • If the problem persists, then find the Adobe Distiller folder in the Temp folder and delete it. Create a new folder with the same name and check.

  This error error due to permissions for the folder %Temp% no, please try to give all permissions to the Temp folder.

  Kind regards

  Ana Maria