Setup error "setup.inf is damaged or missing.

Similar Questions

• Fatal error: (syssetup.inf) is damaged or missing

  During xp pro install on partition fresh after removing 1 defective hard disk and configuring master slave stand alone by altering the second disc of cs on the riders. There is a copy of Windows 7 on another partition but will not run just freezes and I can't boot from that disk due to error code 5. I am so installin xp to reinstall 7A from there. This is an old M51 think Center that i to peer with and there a lot of data on it.

  Check out these links:

  http://superuser.com/questions/28123/when-installing-Windows-7-cdboot-error-5-appears-cannot-boot-from-CD-why

  http://www.SevenForums.com/installation-setup/2591-boot-error-code-5-a.html

• Hi, I am trying to install on my new 13 "Macbook Pro retina CC and I get an error message that is damaged or missing?

  Why do I get an error message when you try to install on my new Macbook Pro 13 "retina CC? Keep saying that it is missing or damaged. I have a membership and you have already installed the program on another computer - iMac.

  Please refer below post:

  Of nowhere, cloud Creative works not

• error code 39 drivers damaged or missing

  I have an older zv5000 HP Pavillion with the 224th CD Teac DW - a/DVD RW disk in it.  After doing a full format of the system and restore by using the original cd system has worked well for about a week.  Then I tried to get the drive to install software and it wouldn't read the disc.  I checked the Device Manager and found the yellow «!»  So, I uninstalled the drive and restarted the computer.  'Found' the material 'nine', he says an error has occurred and the hardware may not work correctly.

  I tried to use an external CD/DVD-RW drive, but got the same message that an error has occurred and it might not work etc.  An another Manager check for device and saw yellow "!" on the TWO CD/DVD units. Uninstalled both, but I got the same error on start up.

  It seems that something corrupt or deleted ALL drivers for CD/DVD ROM.

  I tried to find the drivers for the drive Teac DW 224th - has on Microsoft Download site, but unless I'm blind, or just don't know what I'm looking for, I can't find them.  Are there reliable download sites where I can download these drivers without having to worry about viruses etc?

  Any suggestion would be accepted with gratitude.

  Jerry

  Jerry

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&TaskID=135&prodTypeId=321957&prodSeriesId=376999

  Hope this helps, Gerry Cornell

• I recived the windows\system32\config\system damaged or missing error today

  I got the windows\system32\config\system error damaged or missing today and do the chkdsk c:/r on it and he said: "The Volume appears to contain one or more unrecoverable problems"... is it still fixable or have I just lost my HD?

  I can't do a cause of model, that I built it 2 years ago.
  I run windows xp professional, service Pack3, all updates
  I use spybot, avg, windows defender and malwarebytes
  Caused the computer to restart 4 times and I didn't know it until it was too late cause we had electricians turning the power on/off and I didn't know my computer kept on again and restart.
  I have a cdrom to work and I still have the xp cd.

  Note: I tried to do a repair of windows, go to the Setup screen. But there was no repair to the screen only option how much space is free, if I wanted to install or delete a partition. I have nothing just to the left.

  If chkdsk does not resolve your hard drive, then you will need in the end not completely reformat your hard drive and reinstall Windows.  Before doing so, however, you must save as much data as you can to an external USB hard drive.  If your system boots, then save as much as the hard drive will allow.  If your system does not start, then you should try to boot from a bootable CD that will support USB drives (I prefer free Linux Livecd such as Knoppix), then again until you can.

  To reinstall Windows, many computers have a recovery Partition that will restore your computer to its State as purchaser which can be activated by pressing a combination of keys special at the time where the manufacturer splash screen goes back to the start.  Read quickly, find the appropriate key combination and press it to reinstall Windows - well in your case, it seems that you have an installation CD.  If the request to do a 'Quick format' or 'Regular Format', do not select Quick format.

  HTH,
  JW

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• SE error message: "Windows cannot load the driver for this hardware device. The unit may be damaged or missing. "When you try to install new drivers for DVD players

  Original title: CD/DVD drives do not work after upgrade from XP to Vista

  I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work.  I also tried two external drives, same thing.  I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers.  Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd!  Am tearing my hair!

  Hi krt2,

  In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load

  You can try to uninstall and reinstall the driver for the device to solve this problem.

  Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:

  a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.

  c. on the device properties dialog box, click the driver tab, and then click on uninstall.

  d. restart your computer.

  Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.

  See the links below for more details on the update of drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, read the following article and check if that helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HOW CAN I FIX THE ERROR: "REGISTRATION FOR THE SERVICE IS MISSING OR DAMAGED?

  HOW CAN I FIX THE ERROR: "REGISTRATION FOR THE SERVICE IS MISSING OR DAMAGED?

  When you see this error message?

  IF its all in trying to make an update, then:

  Make sure that the following services are listed and started. in "search programs and files" type "services" (without the quotes). In the results, click on 'services' and the services window should open.

  Make sure that the following is listed and started:

  Background Intelligent Transfer Service

  The base filtering engine

  Cryptography Service

  DCOM Process Launcher service

  Remote procedure call (RPC)

  RPC end point mapper

  Windows Modules Installer

  Windows Update

  IF it's trying to make an update and the foregoing is listed and running, then try this fixit - https://support.microsoft.com/en-us/kb/971058 to see if it helps.

  PS - if one of the services above are not listed, or is listed but not start, then see if you can update your antivirus program and run a scan full to see if it detects malicious software. Then, run the fixit above.

• What is shell management database, getting the error "shell management database is damaged or missing".

  I tried to uninstall nero 8 without success as he kept announcing that he had ceased to function... I get a signal that "shell management database is damaged or missing.

  I then tried to update nero 8 they suggested, also without success.
  I also tried to fix the problem using microsoft solve this Center, but the same signal (shell management data base etc etc) kept appearing.

  Hello

  See if that helps you.

  Read "Nero 8 Clean Tool" of their removal tool:

  http://www.Nero.com/enu/support-Nero8-tools-utilities.html

  See you soon.

• Ntoskrnl.exe damaged or missing error

  I'm now locked in battle with the ntoskrnl.exe file corrupted on my computer. It started a week ago when I stopped, I noticed updates have been planned and so I clicked on to install updates and shut down option. Next morning all * broke loose and I'm dealing with a damaged or missing ntoskrnl.exe file. Now when I start the machine starts OK and then when the Windows boot screen showing moving green lines appear, it holds for a few seconds and then automatically start startup repair... After working on what he comes back with mode "cannot repair computer automatically, and when I ask to send the information contained in". I can't find any additional information. System restore fails due to a corrupted file. I have tried and actually started the system with the recovery in the drive but not from this date disc... maybe I'm super tired. I read that you can expand the file in the location of the recovery disc, but I get confused the guidelines regarding disk numbers. Is it possible to buy a HARD drive up, install it in the machine and then install vista on it and set the new drive as the primary drive and leave the old drive in pure storage. Or the problem would still exist? I have photos stored on the drive and more priceless family of financial records and other important documents on it as well. Dell Studio Desktop Core 2 Duo Windows Home Premium x 64 processor.

  Hello

  I suggest you to refer the link and follow the advice given by Halima S dated 26 May 2010 and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/ntoskrnlexe-corrupt-after-downloading-SP1-on/bedc2b71-A010-4DB9-91d3-9f117b164f45

• Black ink cartridge saying error response damaged or missing

  All in one C309g has 564 HP factory cartridges.  The big black and 3 smaller (yellow, Cayan and Magenta) and yet I still get the answer after re-booting "black ink cartridge damaged or missing.

  Thanks for the replies.

  Turns it of a FIVE-cartridge printer and needs a carterridge of additional Photo (black) only. Problem solved with a trip to Trajay

• CD/DVD driver damaged or missing. How to get the new driver?

  After working well for 3 months my CD/DVD drive does not show in my computer.  It appears in Device Manager.  Display properties Drive watch Code 39 driver damaged or missing.  Try to update driver says driver is installed and up-to-date. Said driver driver search comes with Windows 7.  How to get and install a driver right?

  Hello

  Code 39 means that the driver is corrupted or missing.

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Does not start Equim A60 - system is damaged or missing

  Hi, is there anyone who can help me to save my data I had on my laptop Equium A60. The system displays this message when I boot it "WINDOWS\SYSTEM32\CONFIG\SYSTEM" IS DAMAGED or MISSING. I got my disk to RESTORE but it clealy invite, a warning message that all my data would be lost for the default setting is installed. I will definitely use this disc, but before that I need my data. Please also note that Windows XP is running on my system.

  The problem occurred when I installed the drivers for a BLUETOOTH dongle. The installation was perfect but when I rebooted my windows the above error msg appears and I can't get into windows. I used the F8 key and tried all the option here but none of them worked and I took them to the same message.

  I would appreciate if someone can help me in this matter.

  THANKS AND BYE - ads

  Hello Adnan,

  There is unfortunately no way to load your operating system with the error you describe. As you have already discovered it does not load even in 'SAFE' mode

  This means that you only options for recovery are: -.

  1 reinstall the recovery CDs (which will lose all your data during the re-form)

  2 try to recover the situation by using a Microsoft Installation CD authentic (by using the Recovery Console)

  3 remove the hard drive from your laptop and screw (with a USB caddy) to another PC so that you can
  Retrieve your data befor using option 1 above.

  Option 3 would probably be your best way to recover and would mean that you would not lose your data.

  I also recommend that you invest in a proper backup strategy (possibly drive external hard USB and a utility such as Norton Ghost or Acronis True Image) so that you can protect your system from such incidents in the future.

  Kind regards

• my computer never ceases to appear damaged or missing database shellmanger how can I solve this problem

  my computer never ceases to appear damaged or missing database shellmanger how can I solve this problem

  Hello
   
  1. where the error occur?
  2. What is the Exact error message that you receive?
  3. What is the operating system installed on the computer?
   
  Perform the clean boot and check if the problem is resolved or not.
   

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: perform step 7 to reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Hope that helps.