Ntoskrnl.exe damaged or missing error

Similar Questions

• Ntoskrnl;. exe that is missing or corrupt file error

  I have a laptop with a ntoskrnl;. exe file that is missing or corrupted and cannot rebuild or load from cd, can I download this file somewhere, or what I can do to re - install this file and how?

  Hi WEBERSCHLOTZSKY,

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  3. what happens when you try to copy the file from the Windows XP CD?

  There are several reasons for this error message to occur.

  This problem is often caused when the boot.ini file is missing or misconfigured. This problem often occurs when a user has recently added or removed from an operating system on the computer or added or deleted hard disk drives in the computer.

  If you are unable to start Windows and the error message then consult the below Microsoft article and try the steps mentioned, check if it helps.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

• I recived the windows\system32\config\system damaged or missing error today

  I got the windows\system32\config\system error damaged or missing today and do the chkdsk c:/r on it and he said: "The Volume appears to contain one or more unrecoverable problems"... is it still fixable or have I just lost my HD?

  I can't do a cause of model, that I built it 2 years ago.
  I run windows xp professional, service Pack3, all updates
  I use spybot, avg, windows defender and malwarebytes
  Caused the computer to restart 4 times and I didn't know it until it was too late cause we had electricians turning the power on/off and I didn't know my computer kept on again and restart.
  I have a cdrom to work and I still have the xp cd.

  Note: I tried to do a repair of windows, go to the Setup screen. But there was no repair to the screen only option how much space is free, if I wanted to install or delete a partition. I have nothing just to the left.

  If chkdsk does not resolve your hard drive, then you will need in the end not completely reformat your hard drive and reinstall Windows.  Before doing so, however, you must save as much data as you can to an external USB hard drive.  If your system boots, then save as much as the hard drive will allow.  If your system does not start, then you should try to boot from a bootable CD that will support USB drives (I prefer free Linux Livecd such as Knoppix), then again until you can.

  To reinstall Windows, many computers have a recovery Partition that will restore your computer to its State as purchaser which can be activated by pressing a combination of keys special at the time where the manufacturer splash screen goes back to the start.  Read quickly, find the appropriate key combination and press it to reinstall Windows - well in your case, it seems that you have an installation CD.  If the request to do a 'Quick format' or 'Regular Format', do not select Quick format.

  HTH,
  JW

• HP Pavilion Notebook: Mfc120u.dll AcceleratorSt.exe - system file missing error and BTServer.exe - Application error

  I get the error message "system error AccelerometerSt.exe) mfc120u.dll is missing.  I was not able to find a reference to this dll missing accurate regarding the AccelerometerSt.exe.  It seems that the AccelerometerSt.exe is the HP 3D DriveGuard software.  In my view, that an update has been installed.  How can I fix this error?

  And also I can find an Application error error - BTServer.exe

  Please give some solutions to this problem...

  Hello

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  Once done, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Yet once, once done, reboot the laptop.

  Kind regards

  DP - K

• Winload.exe damaged or missing (0xc0000221)

  Have been running Vista on a T61 Lenovo Think Pad for more than a year and just today (just a week after the expiration of the warranty), windows vista does not completely start.  I get the black screen with the following error:

  Windows could not start. a recent change in hardware or software may be the cause. to resolve this problem:
  (boot from the cd and repair windows) (actually doesn't say that, but that's what he tells you to do)
  File: /windows/system32/winload.exe
  Status: 0xc0000221
  Info: the file is corupt possibaly. the header checksum does not match the checksum calculated.

  I created a boot disk (since the manufacturer did not provide with the laptop) and was able to perform the repair (with no luck) and system restore (with no luck).  I can get in the quick c: through the startup disk and I ran the BIOS screen HARD drive diagnosis and it happened (so far... still underway).

  The manufacturer support told me that I needed to remove or replace my HDD and reinstall Windows which I can't believe would be the solution to this...

  Help, please!

  Thank you.

  Hello bayareapianoman,

  Thank you for visiting the website of Microsoft Windows Vista Community.    You can try one of the options are using the System File Checker tool.  From the command prompt type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• new out of the box, all the ink cartridges damaged or missing error 8500

  So, I just got the officejet pro 8500 wireless. follow the instructions in game. at the start he said that ALL the ink cartridges are missing or damaged. I have a hard time believing that, if something is down or I missed something very basic in the installation program.

  I tried to remove the cartridges and re - install. Also checked that they are in the correct order. Don't know what to try next.

  Well he chalked it up to random mishap. I installed the software to see if she said something more useful. not a lot, but he pointed out that he was missing all the cartridges. I went back and exchanged the printer. the replacement is fine.

• Sony Vaio VGN-FW11M-CD/DVD is damaged or missing error codes 10, 19, 31, 32, 39, 41 problem

  I have now for the past 5months tried to solve this problem, as I have no money to send the machine to Sony for repair, I tried all the tools Mrfix nothing worked it means removing lower the filter and tried to restart computer, many opportunities, I gave up and bought a portable hard drive and although I need my rear disc first of all it is completely fed workstation and even Device Manager for months and nothing has been able to recover it, only yesterday when I turned it on it gave the message that drivers Matashita BD - CMB UJ-120 has successfully installed and I was able to run the DVD, s and I even burned a cd of music just to see if it works and no problem, however I've turned off the laptop and turned it back and am once again to square so that the drive works however if I only install the drivers which I do not know how to access, there is little to soothing sites you can get rivers however all our full of bull & I know that an optical drive comes with the PC , but any ideas or should I just start the fires off the machine just for a good measure and buy a new CD/DVD-rom for the laptop... only another conclusion is that the son or looted, but I do not understand that as I only had the phone for a little over a year and a half gruff the CD/DVD drive would not break so fast?

  Here are the MS tips to solve your problem.

  See if you may have missed a step in their process.

  ·                        http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Startup problem, get an error missing: < ROOT WINDOWS > \system\ntoskrnl.exe

  OP: Start-up of the question

  I starts instead of windows displays an error coming. It says I'm missing: \system\ntoskrnl.exe. How can I fix it?

  Hello Gwafer74,

  This problem can be caused if the Ntoskrnl.exe file is missing or damaged. You can follow the steps described in the article for this problem:

  http://support.Microsoft.com/kb/314477

  Follow the steps in method 1.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• After restoring to factory setting... ntoskrnl.exe is missing or damaged

  I have a problem with my Asus R500VD laptop.

  My phone was at a standstill after I opened a few applications and after waiting for a while, I decided to shut it down by holding the power button for a few seconds. After that, I got a BSOD error 0xc0000221 saying ntoskrnl.exe is missing or damaged. I tried to go back to a previous system restore point, tried chkdsk /r (no error based), tried bootrec with all options (it shows 0 found windows installations), tried a full restore to factory (using the on my laptop's recovery partition), but nothing has worked. I always get the error above.

  When I restart, it tries to automatically repair the system (that works, it cannot solve problems automatically) and at some point it changes recent cancellations (complete the recovery I think). I tried the different boot options, but nothing seems to work.

  Does anyone have an idea how to solve this problem? It doesn't seem to be any corruption in the filesystem (chkdsk), ntoskrnl.exe is not missing...

  Thanks for your help! Greaty I appreciate it! Tips are welcome!

  Rob

  Hi Blueelvis,

  No, unfortunately I don't have a spare HARD drive. But... I sent it back to the shop where I bought it. Should still be under warranty. I have included all our correspondence to give them an overview of what has been tried. Thanks for your help! I hope that I get a replacement or they're going to fix it. I also ran memtest86 + using The Ultimate Boot Disk and he found loads of errors--not sure whether memory is as bad or if it has something to do with the 8 GB with 64-bit processor.

  Best,

  Rob

• Qosmio F20-153 - ntoskrnl.exe file missing

  Hello

  I have an almost 5 year old toshiba Qosmio F20-153, which has developed an error with the Windows message root>\system32\ntoskrnl.exe file is missing.
  I wonder if it's fixable without completely re - install the complete operating system that I still have the Toshiba restore disk.

  Any help much appreciated.

  Hey Buddy,

  In my view, your only option is recovering the entire notebook. The Toshiba Recovery disk only contains an image of factory settings, which means that you can t install this single file of this disc.
  In addition it s a good idea to reinstall Windows from time to time. If your installation is already 5 years old, you should do this. You will be surprised with the speed of your laptop is after that. :)

  Use the recovery disk is quite simple: you must boot from that disk and follow the instructions on the screen. You do a few clicks only and that s it!

• When turned on the computer he get an error message ' missing < root windows > \system32\ntoskrnl.exe.

  Hi, I replaced the motherboard in my computer, it seems to work very well, but when you turn on the computer I get an error message:

  \SYSTEM32\NTOSKRNL.exe is missing or damaged

  At this stage there is no cursor, or what I can do to get in my area on my drive, it's as if the computer shuts down and this message does not disappear.

  I am running Windows XP operating system.

  Is there a solution for this?

  Thank you

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed on the computer?

  Follow the steps in the link below and check if this can help: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477

• Cannot start Windows Vista - ntoskrnl.exe is missing or damaged

  Hello, I am running Windows Vista. When I tried to start today I got an error message saying the ntoskrnl.exe is missing or damaged and should be replaced. How can I do that I can't use my netbook? Im not a geek, any advice would be apreciated, thanks

  Hello

  1. don't you make changes to the computer before the show?
  2. are you able to boot to the desktop?

  I suggest you try the steps from the following link:

  Windows cannot start with the error of the ntoskrnl.exe missing or damaged when the keys are pressed at the start
  http://support.Microsoft.com/kb/2022960

• missing Ntoskrnl.exe and other errors when who reinstall windows 7 pro 64-bit

  I had windows installed on a HARD drive and received an SSD and I decided on the SSD HARD drive image, so I wouldn't have to reinstall. As I suspected it might that cause some problems and I decided to simply wipe the SSD drive and attempt to reinstall. I wiped the SSD and started my windows 7 Professional 64-bit SP1 DVD. It will pass through the first process (Windows loading files) with the screen of levels of grey and the downstairs, but subsequently loading bar, I get an error telling me that the ntoskrnl.exe is missing or damaged, and I have no option other than to try again to load the disc, or stop. I have another disc of Windows 7 Professional 64 bit I tried to use, and it gave me the same message. There are a few other errors I received, I do not at the moment, but as soon as I get some time and if I get them again once I will update the thread with this info.

  I also ran memtestx86 and there were errors with a specific location, but I just removed the RAM of this niche and I guess it should be OK after that. Am I wrong?

  I am the computer OEM. If I need to provide more information please let me know and I can accommodate.

  Thank you.

  The problem was with RAM. One of my 4GB DIMMS was bad. I removed and changed my poles autour needed and I could boot disk Windows 7 Pro and install correctly.

  A faulty RAM stick was causing the problem.

• Windows didn't start because the following file is missing or damaged: _ < root Windows > \system32\ntoskrnl.exe.__Please reinstall a copy of the above file.

  Hi the other my system was crushed, and on restarting I got this message: Windows is not start because the following file is missing or damaged:

  \System32 \ntoskrnl.exe.
  Please reinstall a copy of the above file.

  I've read a few articles online, but still I can not solve the problem. I don't want to reinstall XP or lose my information.

  can any1 give me a simple cut down on what to do (step by step).

  Thanks in advance.

  Hello Jamdutch,

  Thank you for your message.  Click HERE for instructions to perform a repair of the system installation.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A55: damaged or missing ntoskrnl.exe

  To anyone who reads this,

  Help!

  I don't know why, but when I turned on my computer (it worked very well about 10 minutes ago), the window reads that

  Windows could not start because the following file is missing or corrupt:
  \SYSTEM32\NTOSKRNL.exe.
  Please reinstall a copy of the above file.

  This is my first time having a problem like this. I already went to the Microsoft site and found this

  http://support.Microsoft.com/?scid=http%3A%2f%2Fwww.support.Microsoft.com%2fkb% 2f314477% 2fen - us % 2f

  However, I don't know what to do. I put the recovery CD in and nothing happened. And I don't know what is the Windows XP CD-Rom. Whatever it is, I don't seem to be. Can someone help me please?

  Post edited by: tigergirl

  Hello

  If you are not familiar with stuff like this the simplest way is to reinstall the device using Recovery DVD that you got with your laptop.

  Place the recovery media in the DVD drive and unplug the unit. Turn on the unit and press the C button and keep it down. On this way the DVD player will be a first in the boot priority. If everything works fine the recovery procedure will be implemented. Please follow the instructions on the screen.

  I hope that you have no file on the HARD drive because if you start the recovery procedure will be formatted the entire HARD drive and all files will be deleted.

  Good bye