Setup hangs with web level installation/configuration 11g ps2

Similar Questions

• Using backups 10g with the new installation of 11g

  Hello Forum Oracle; If I install a new copy of Oracle 11 g xe, it'll work the backup I have a 10 g xe? My APEX applications in the installation of 10g xe will be restored after a data recovery?

  Details of the OS message pl. You must export the data from 10g XE and import in 11g XE

  http://docs.Oracle.com/CD/E17781_01/install.112/e18802/TOC.htm#CIHCDCDH

  HTH
  Srini

• Windows Installer error - "there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected.

  When trying to install a new control software and data package my Hyperion charger I get this error message "there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ".

  ---------------------

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.

  This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.  How to work around this issue and get this downloaded.

  Lisa, please try of products download Premiere Elements | 10, 11, 12, 13 and let us know if you need help with this.

  Atul_Saini

• Configuration problem of the mixture of the regions with and without installation of persistence of the disc causing the JSONFormatter to fail

  I have trouble setting my local setup correctly with a mixture of regions with different configuration of persistence of disc.  Is a configuration problem on my end or a bug in GemFire and/or Spring GemFire data?

  The configuration of my work is as follows:

  < gfe: replicated-region id = "replicatedRegion" cache-ref = "gemfireCache" disk-store-ref = "overflowOnlyDiskstore" persistent = "false" >

  < gfe:eviction type = threshold "HEAP_PERCENTAGE" = "90" action = "OVERFLOW_TO_DISK" / >

  < / gfe: replicated-region >

  < gfe:local - region id = "localRegion" cache-ref = "gemfireCache" / >

  
  

  With the above configuration, I can successfully call JSONFormatter.fromJSON (json) and get a reference to a PdxInstance object.  However, when I kinda modify configuration to enable the persistence of drive on one of the regions, the call to JSONFormatter.fromJSON (json) fails.  The change is as follows:

  
  

  < gfe:local - region id = "localRegion" cache-ref = "gemfireCache" persistent = "true" disk-store-ref = "persistOverflowDiskstore"/ >

  Without any additional modification, the following error starts occurring:

  com.gemstone.gemfire.pdx.JSONFormatterException: could not parse JSON document: [Source: java.io.StringReader@5549f0e, line: column 26,: 6]

  at com.gemstone.gemfire.pdx.JSONFormatter.fromJSON(JSONFormatter.java:66)

  ...

  Caused by: com.gemstone.gemfire.pdx.PdxInitializationException: The PDX metadata must be persistent in a limb that has persisted data. See CacheFactory.setPdxPersistent.

  at com.gemstone.gemfire.pdx.internal.PeerTypeRegistration.checkAllowed(PeerTypeRegistration.java:531)

  at com.gemstone.gemfire.pdx.internal.PeerTypeRegistration.verifyConfiguration(PeerTypeRegistration.java:515)

  ...

  Note that it is breaking while I try to get a reference to a PdxInstance, and if the code has not yet arrived at the point where I place a PdxInstance object in a region.

  Thanks for any help in advance.

  Hello

  JSONFormatter PDX uses as is the serialization mechanism from the Gemfire cache. As indicators of error, you must have your persistent PDX meta-data when you use PDX with an area that itself is persistent. Adjust your configuration as follows:

  It will use a default for PDX record store, but you can also use a specific store if you wish.

  When you use PDX, a "PDXType" is created for each class serialized with PDX and this type id is stored with the data in the region. If this region is persistent, then the PDXType, associated with this object must also be kept.

  -Jens

• Problems with iTunes re-Setup - "there is a problem with this Windows Installer package"

  I tried to re - install iTunes with the latest version because I had received an "error 7" message instead of iTunes. You had covered the steps to uninstall and reinstall iTunes by removing iTunes, Quicktime, and other applications on my computer. I had uninstalled iTunes and Quicktime, but when I tried to uninstall the Apple software update, I get the following error message:

  "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

  How am I supposed to fix my problem with iTunes, so I can download music if I couldn't uninstall programs I need to uninstall? Can I try reinstalling iTunes at the moment? Please let me know what I can or can't do.

  Specific file names are mentioned in the error messages?

  Here is the standard advice for dealing with problems of installation of iTunes.  Because you are having trouble to uninstall one or more of these applications, you must use Windows Installer Cleanup mentioned below or Free Revo Uninstaller to uninstall applications difficult.

  Caution: Cleanup utility Windows Uninstaller has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I believe this was linked to Office uninstall).  You can still get Windows Installer Cleanup here--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html utility if you use it, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  An image full disc would be safer if you have this ability.

  If these steps do not help, ask for help in the Apple forum: https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions&tagSet=1234#/
  *****************************

  Have you tried completely removing all software related to iTunes and files, allowing you to perform a "clean installation" of iTunes? It comes to my technique proposed, taken from the article in Support of Apple HT1926.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility:
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

• I have tunes Setup error - "he has a problem with this windows Installer package. A program required for this install to complete could not be run. »

  Hello

  I am trying to install I tunes but I received a message with the following text:
  "There is a problem with this windows Installer package. A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".
  
  
  Kindly help me solve this problem
  
  
  
  
  Uday

  You can be better to ask on the forum of Apple in the first instance.

  For example, see:
  http://support.apple.com/kb/HT1926 - General information
  or
  https://discussions.Apple.com/thread/1853514?start=0&TSTART=0
  or
  https://discussions.Apple.com/thread/4214188?start=0&TSTART=0
  or
  https://discussions.Apple.com/thread/3926508?start=0&TSTART=0
  (the last three are similar-sounding issues already on their forum. There are other institutions)
  But this one specifically peut help - https://discussions.apple.com/docs/DOC-3551
  My apologies if you have already seen and tried these.

• Get WVC80N to work with my crazy network configuration

  Hi all

  I come here with great hope and told me that I wouldn't be disappointed.

  I have a small setup hardware multi (Airport express to Apple, Linksyss single router befsr41 wired, ports linksys switch 8).

  So here's my setup as a Time Warner cable modem > BEFSR41 > Apple Airport Express the BEFSR41 is also used so I can reach my TV and decoder via the switch.

  My airport express is used to connect my wireless laptop and I'm talking about the infamous WVC80N to Airport express.

  My problem is that whenever I go through the guided installation, he finds the wireless but does not connect to configure the TZO account I (paid account) in the end.

  I tried to ask the TZO people and they say that I need to talk to apple to port forwarding... I can't seem to find how carry forward in the Airport express.

  To set up the camera I plugged on the switch that is connected to the BEFSR41.

  All in all the Airport express receives its ip address of BEFSR41 (each single device is BEFSR41 ip, I think)

  So, how can I get the camera to talk to airport express...

  If this configuration is confusing you I ask for apology, and I'd better explain.

  Thanks in advance.

  You want to reconfigure the WVC80N so connect the camera with the BEFSR41 and open the BEFSR41 configuration page and click on the status tab, there you will be able to see a sub-tab "Local network"click on that and then click on the button"client DHCP table" here in this chart you will be able to see the IP address of the camera...

  Then open the camera with this IP address configuration page... Do the settings on the camera as on the Airport express wireless and static IP address according to the BFSR41...

  

  Open the page of configuration of the camera again with the new IP address and then provide TZO account information and click "update now"... In addition to allowing the port number 1025...

  

  After all of these settings, you must open the same port on the BEFSR41 router. You must open the port on the BEFSR41, as is the main router...

  

  After making these settings you can use the camera remotely with the TZO account...

  Try these settings certainly it will help you...

• Error: "there is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider staff or the support package' when trying to install iTunes on Windows 7

  Original title: DLL required for uninstall and install iTunes?
  I get this message: there is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider to support personal or package.

  I can't install and uninstall iTunes no matter what I do. Help, please!

   
  Hi stjimmy9999,
   
  1. are you able to install other programs on the computer?
  2. what version of iTunes you are trying to install?
  3. have you SpyCatcher program installed on the computer?
   
  Program SpyCatcher interrupts the Windows Installer to not save the files during the installation of iTunes.
   
  Try these steps and check the result.
  Step 1: Download the latest version of iTunes
  a. visit http://www.apple.com/itunes/download/
  b. click on 'Download Now' and save the file to the desktop.
   
  Step 2: Install the program as an administrator by disabling all programs currently running on the computer, non-Microsoft
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. restart the computer and right click on the Setup file of iTunes, right-click on the file and click Properties.
  d. click on the Compatibility tab and place a check on "Run this program as Administrator" under "privilege level".
  e. click ok to apply the changes.
  f. open the file and install it.
  g. Article, follow "step 7: reset the computer to start as usual.
   
  For more information on installing iTunes, see the following article: difficulties to install iTunes or QuickTime for Windows
  For further assistance with this, please ask a question about iTunes Forum

  Visit our Microsoft answers feedback Forum and let us know what you think.

• VCP - DV after training on installation configured manage 5.0

  
  Dear all,

  I attended the training in our offices online fot installation configuration manage 5.0, we were two people and enrolled in training, I was also at the conferences while my colleauge was interacting in the virutal for any question we had. Now I want to prepare for the exam VCP - DV but it is mentioned that he needs to participate in training courses and then hands on experience then we are eligible for the examination.

  For what about hands on experience, I have it as we have virtual environment in our office for companies but for the transcription of the qualification training is the name of my colleauge, in this case how can I register for the exam?

  Please notify.

  Kind regards

  Jocelyn

  You can register only after obtaining a transcript in your name. Hands on experience is something that you need to become familiar with the technology. But without qualification training, you cannot meet the certification.

  VMware has recently made many changes to their certification roadmap. You can take place VCA-DCV(Associate level certification) without and the required qualification exam. Take a look your blueprint VCA - VTC here.

  One thing is, if you are certified secure Channel-cloud or PCV - DT, you won't have the qualification. If this is your first VCP, you will have to follow the training and take the certification.

• Good way to start with learning the concepts of 11g

  Hello
  
  I have a work experience on the BEA weblogic server 8.1 sp4 on which I have worked for about 2 years now. My current mission requires work to Installation / development and deployment on the server of Fusion middleware 11g. Could some body if you please suggest me a good way to start with learning the concepts of 11g.
  
  I understand that all the documentation is available in the Oracle forum, but I want to know where to go.
  
  My essential tasks in the assignment would be
  1. installation (OSB on top of WLS).
  2 development/configuration on OSB.
  3 deployment and administrative tasks.
  
  Kind regards
  Angelique

  Some former OSB tutorials are mentioned here: Oracle OSB - tutorial for using Eclipse plugin development

  The development of OSB guide (which shows how to use Eclipse) can be found here: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/toc.htm

  For now (to my knowledge), Eclipse is used for the development of OSB. Note that JDeveloper is used for development with the Oracle SOA Suite (for example Oracle BPEL).

• 2.0 application with 2.5 Installation of AIR Runtime error

  Hello

  I get an error while trying to install an AIR application. In fact, I just saw the dialog Setup AIR with an empty progress bar and a message "install... ». Here is the log file:

  4 Nov 23:07:57 MM/Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR installer [201]: command line is:-psn_0_172074
  4 Nov 23:07:57 MM/Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR installer [201]: installed the runtime (2.5.0.16600) located in Library/Frameworks/Adobe AIR.framework
  4 Nov 23:08:02 MM/Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR installer [201]: end of the installer with the exit code 6
  4 Nov 23:08:02 MM com.apple.launchd.peruser.501 [97] ([0 x 0-0x2a02a].com.adobe.air.Installer [201]): finished with exit code: 6
  4 Nov 23:15:15 MM Eye - Fi Center [226]: file Info.plist NSDocumentController WARNING: values of CFBundleTypeRole entries must be "Editor", "Viewer", "None", or "Shell."
  4 Nov 23:15:15 MM Applications/Eye-Fi/Eye-Fi Center.app/Contents/MacOS/Eye-Fi Center [226]: launch of the sub-process with command line AIR AIR.framework/Versions/1.0/Resources/Adobe Library/Frameworks/Adobe Updater-eula - nai
  4 Nov 23:15:15 MM/Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe [229] Installer: Installer starts with version 2.5.0.16600 on Mac OS 10.6.4 x 86
  4 Nov 23:15:15 MM/Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe installer [229]: command line is: - eula - nai
  4 Nov 23:15:15 MM/Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe installer [229]: installed the runtime (2.5.0.16600) located in Library/Frameworks/Adobe AIR.framework
  4 Nov 23:15:15 MM/Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe installer [229]: display of EULA to start
  4 Nov 23:15:17 MM/Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe installer [229]: display of EULA has completed
  4 Nov 23:15:28 MM configd [13]:
  4 Nov 23:15:29: - last message repeated 2 times.
  4 Nov 23:15:29 MM/Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe installer [229]: display of EULA has completed
  4 Nov 23:15:29 MM/Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe installer [229]: end of the installer with the exit code 0
  4 Nov 23:15:29 MM Applications/Eye-Fi/Eye-Fi Center.app/Contents/MacOS/Eye-Fi Center [226]: subprocess AIR AIR.framework/Versions/1.0/Resources/Adobe Library/Frameworks/Adobe Updater failed (1)
  4 Nov 23:15:29 MM configd [13]:
  4 Nov 23:15:59: - last message repeated 14 times.
  4 Nov 23:16:31 MM System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[156]: no valid tickets, time

  Some information on the application I am trying to install:

  1. the application descriptor file points to version 2.0 of the runtime. The application I am trying to install is bundled as a dmg.

  2. I have version 2.5 the Runtime AIR installed on this machine, so I don't know why there are references to the EULA in the log file.

  3. I'm not actively double clicking on the dmg file. The .dmg is actually installed by a third-party application via the command line.

  Any ideas on what could happen here, or can offer any corrective action on how to get this application installed correctly?

  Thank you

  Sean

  Hi Sean,.

  Thank you for bringing this up again.  I just took a quick glance to the State for the 2756259 and the 2756424 and they are both marked closed / fixed for AIR 2.6 which is scheduled for the coming weeks.

  Bug 2756259 ("enigmatic error message when the installer fails with the"Adobe"this file in / applications") has been treated by having the AIR installer gives a detailed and understandable mistake so that users can manually deal with the presence of this file themselves.  The installation silently fails, but the message is now more readable.  We did not want to edit a file existing on the user's computer, this seemed the best option available.

  Bug 2756424 ("execution of Setup fails to bypass folders with insufficient permissions during installation").  The AIR installer now automatically corrects the permission level of "~/Library/Application Support/Adobe", "/ Users/Shared/Library/Application Support/Adobe ' and"~/Library/Preferences/Macromedia/Flash Player/www.macromedia.com"records.  It works in gui and silent modes.

  In the meantime, feel free to send people to this message which contains a small AppleScript which attempts to address these issues.

  Thank you

  Chris

• Tips for creating an application with web services please?

  I created a simple application for a client who interacts / monitors a device VISA with LV 2009.  The architecture is essentially a state machine with a timeout for VISA calls that retrieve the current state.

  The client asked that the app will also be controlled via the web and asked me to set up a demo with one or two simple functions.  I have the experience to bring charges against the Server Web LV7 model, but not with web services.

  So here's what I did...

  (1) added a line to my application that would inject actions in the state machine.

  (2) created a simple VI pushes these actions in the queue and plans to use it as the Web Service.

  And then I followed the examples for Web Services, thinking that the Web server is running in the same program as the development environment, such as the version LV7.  This doesn't seem to work.

  Could someone give me a quick overview on how best to do that, or to report an article?  I have simple working WS, but here are a few questions...

  @ Jed Davidow:

  We met this difficulty with our web app (LV 2009) as well.  Because now we feel the solution the easiest way is to activate the VI server in your main application (EXE) VI and place calls to its hierarchy of web services in the open Application > VI Open > call by Ref > close VI > structure to close the Application.

  Although we try to minimize the use of the present in web services, it makes sense for some resources shared and accessible throughout the world as references to database, configuration globals, etc.

  I also note that there seems to be an instability that we have not been able to identify which may (or not) be attributed to the use of this technique.  The symptom is LabVIEW from memory immediately at some point.

  I am currently looking into migration towards 2010 LV, and it seems that the same constraints between instances of the application are in place.  I expect that, but I was expecting some more simplified with the next version of LV interprocess communication methods.

  --

  James

• upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  my PC configuration is like below:

  Card mother Intel DH61WW
  Processor Core I3 2100 3.1 Ghz
  4 GB OF DDR3 RAM
  Seagate 1 TB SATA HARD drive
  OS: Microsoft Windows XP Professional SP3

  I run Windows 7 upgrade advisor in which some results below the incompatibilities:

  Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
  Unknown Intel we have not the compatibility information about this device.
  Intel 82579V Gigabit Network Connection
  Unknown Intel we have not the compatibility information about this device.
  Realtek High Definition Audio
  Realtek unknown we have not the compatibility information about this device.

  Here's my conceerns:

  What needs to be done to overcome the problems of incompatibility?
  Do I need to download new software files compatible for windows 7 and then install
  for example VLC media player, Skype, MySQL Server I am running
  or currently existing files are compatible to install with Windows 7?

  Would I be able to upgrade to windows 7 without any problem and safely?

  Could you please help me with the questions above?

  Please correct me with additional suggetions that I may have missed with.

  Looking forward to hear from you

  Thank you

  You understand that you will not be able to upgrade Windows XP to Windows 7?  He will have to do a clean install.

  The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)

  John

• When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package.

  Original title: I'm loading Quciktime.

  When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. "How to do this?

  Hi Tonyb13apb,

  ·         The issue is limited only during the installation of QuickTime?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Uninstall and reinstall QuickTime and check.

  http://support.Apple.com/kb/HT1925

   

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

   

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  a. click Start, select run.

  b. type msconfigand click OK.

  c. the system dialog Configuration utility appears.

  d. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

  e. When prompted, click on restart to restart the computer.

  If the problem persists, you can contact Apple support for more help and information.

  http://support.Apple.com/kb/HE57

  Let us know if it helps.