Several missing options in security and place

Similar Questions

• Missing option in CS5 and RAW of the bridge

  When you try to take a picture of the bridge at RAW or CS5 for treatment, these options are no longer available. I get a msg that they are not in the system.

  I have re-installed CS5 but no email back happened to Adobe confirming activity instillation is complete.

  Got, it works. Had to uninstall that re - install again.

  Thanks for all the help - much appreciated.

  Dale

• T420 BIOS - Option "Clear Security Chip" missing

  Hello

  We got several T420 with different versions of BIOS (from 1.30 to 1.40)

  95% of them, the Option 'Clear Security Chip' is available @ BIOS

  but on some of them, the option is missing.

  Y at - it a simple explanation of this mystery?

  Best regards

  Chekov33

  The option to clear security chip is only in the BIOS after a cold start.

  He won't be here after a hot start.

  This is for security reasons.

  Mystery solved?

• I missed the SHIFT key and press several keys in the lower corner of my keyboard LH. Firefox split up into several iterations, and I had to reboot.

  I missed the SHIFT key and press several buttons in the lower left corner of my keyboard. Firefox has lost the tab that I was using and divided into a separate iteration for each other (plus two I had closed). I could not recover and had to close all but one of them and restore all my tabs.

  What I had done and how I should have recovered?

  First, you need to update to Firefox 18.0.1 Firefox updated to the latest version. The version you are on is bug and little course.

  Second, it looks like you may have entered groups of tabs. Use tab groups to organize a large number of tabs is that look familiar?

• I tried several times to install security updates KB2541025 and KB2543854, but each time getting the message "code 779.

  Original title: update problems

  I tried several times to install security updates KB2541025 and KB2543854, but each time getting the message "code 779" and "Windows Update has encountered an unknown error. I tried to find an explanation here, but no result.

  see if that helps-

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• I do not have a Security tab, I searched my folder option control panel and don't see any file shatr etc.

  I do not have a Security tab, I searched my folder option control panel and don't see any file shatr etc.

  Hello
  1. don't you make changes to the computer until the problem occurred?
   
  I suggest you to follow the steps below and check if it helps:
   
  Method 1: To view the Security tab: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/acl_sec_tab.mspx?mfr=true
   
   
  Method 2: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/310747
   
   
  Hope this information is useful.
   

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• System and security missing in Control Panel and also not able to decrypt the drive

  Original title: System and security

  i is not system and security link in my control panel and I want to decrypt the drive I encrypted earlier, what I do now, please help

  Hello

  To suspend BitLocker Drive encryption on a drive
  a. Click Start, click Control Panel, click System and security and then click BitLocker Drive encryption.
  b. click on suspend Protection for the reader.
  c. a message appears, informing you that your data will not be protected by BitLocker is suspended and asking if you want to suspend BitLocker Drive encryption. Click Yes to continue and suspend BitLocker on the drive.
  By performing this procedure, you have suspended BitLocker protection on the disk by changing the decryption for the BACKSPACE key key. To read data from the drive, the clear key is used to access the files. When BitLocker is suspended, secure the TPM validation does not place and other authentication methods, such as the use of a PIN or USB key to unlock the operating system drive, are not applied. This allows you to make changes such as upgrading system BIOS or replacing a data drive. When you have finished your changes to the computer, click RESUME Protection in the BitLocker Drive Encryption to start Control Panel item to use BitLocker Drive Encryption again.
  To turn off BitLocker Drive encryption
  a. Click Start, click Control Panel, click System and security and then click BitLocker Drive encryption.
  b. find the drive on which you want BitLocker Drive Encryption is disabled and click enable disable BitLocker.
  c. a message appears, informing you that the drive is decrypted, and this decryption may take a long time. Click on deciphering the drive to continue and turn off BitLocker on the drive.

  More information: http://TechNet.Microsoft.com/en-us/library/ee424315 (WS.10) .aspx

  I hope this helps.

• I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Hom

  I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Home tab to check the activity and the Stock tab. The applications tab is missing. How can I get that back so I can update photoshop and lightroom?

  Please, try the steps mentioned here https://helpx.adobe.com/creative-cloud/kb/apps-panel-reflect-creative-cloud.html

  Let me know if it works!

• Some options have disappeared, and download manager does not appear on every night. Help?

  Hello. I'll try to make it as short as possible. I'm under the program every night. Currently I have version 21, which came out today. But since last week, with the 20 version, I noticed something. Whenever I downloaded something, tried to open the Download Manager, or press Ctrl + J, the Download Manager, we all know did not appear. Instead, the 'library' appears. I don't want to see the library, because it is not 'pretty' as a normal Download Manager. In addition, under Options, under general, downloads, the ability to select where to save the files is missing. Under Security, I don't see my saved passwords. Why all these things "missing"? I did something I wasn't supposed to? Is - will this work for an addon? I left my information below for you everything you need to know. Please, help me?

  The library is where downloads are now displayed. The 'normal' downloads window disappeared for several weeks now in every night. BTW, there's a new toolbar (arrow pointing down) button in the Palette for downloads; It has a "door hangers" which shows the current downloads on the slider "stationary."

  This is the main "issues" on the left side of the Library window.
  
  History
  
  Downloads
  
  Tags
  
  All bookmarks

  Options > general - "save the file to" and "ask me where...» "is always present for me on Windows XP.

  Options > security always has the "Show passwords" button for me.

  I suspect you have an extension installed, which is not completely compatible with 21.0a1

• Recently, I did the update of security and had 17 updates to install for Windows Vista Home Premium SP2.

  Recently, I did the update of security and had 17 updates installed.  After installation I closed the computer for the day.  The next time that I started it upward, I received a stop error message 0x81ecbe79 and he started a reboot loop and I kept getting error code 0 x 81 different whenever it restarted.  The first 4 digits are the same with the rest changing with the exception of the 79 at the end.  So far he has done about 30 times until I finally stopped him frustration.  Also sometimes it would ask if I wanted to check on the web for a fix, but he continued the loop.  The loop stops at different places during the boot sequence.  Once he got almost completely before it restarts and a couple of times, it was in the screen of welcome and rebooted.  Is there a fix or do I have to do a clean install?  The way it is now I'm not sure that I can make a back up of my wife's Family Tree Maker files and get it all.

  1. try to restore the system and if necessary a startup repair.

  2. data recovery.

  3. where questions of Windows updates.

  1.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  2.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  3.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Invisible - Missing FOLDER - C:\Documents and Settings (not will appear in Explorer) in Windows 7

  Re: Invisible - missing FOLDER - C:\Documents and Settings (not will appear in Explorer) in Windows 7

  Hi all

  I have a stable working version of Windows 7 Pro.  (Yes sfc/scannow and chkdsk are 100%)  BUT here's my question and the problem...

  Recently, all of a sudden - my file C:\Documents and settings folder (and of course all of the many folders and files it contains) is no longer present in the computer of Windows / Explorer.

  Yes - I removed the skin system files in folder options (I'm relatively warned these basic commands) and all my other system hidden files appear perfectly.

  Moreover, I KNOW that this directory and the files are still there on the drive, and Yes, they are immediately, when I use the command line (back of the old black box window) in administrator mode.

  Once again all the folders and files in C:\documents and settings are always there (using the cd and dir/p orders) when you use the editor command line (cmd).

  I even tried to change the parameters of security using Icacls and delivered successfully as Administrators security settings: F and system: F but nothing appears in the Explorer.

  I also tried to change the command attrib to this directory with my very basic command-line skills.

  The computer still works fine - as many of you probably know the C:\documents and settings folder is really an older and former OS directory now used for programs inherited, replaced by C:\Users... etc.

  But why have - so MS put in the OS. There are of course good reasons so - I want show back again.

  I tried a system restore but I only got one and it can also have been corrupted since it took me a day or two to notice.

  In summary, when a directory and files 'all of a sudden disappear completely' use widely and all days 'window of windows Explorer normal 7' you know that something is badly broken in the operating system.

  BTW - Yes all Windows 7 updates made and successful... (no easy feat)

  Any ideas out there your technical assistants.

  Thanks in advance
  James 4621

  They do, but I do not really recommend yet.  But I at least trust him more than any 3rd party.  It is not a download if it is an online as part of the Windows Live Safety Scanner scanner.

  And as I went to look for a link, it seems that safety.live.com now re - headed the new scanner, which is a download :)
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  I don't think that this news has a record cleaning component.  But as I said, is never necessary.  The invalid entries in the registry do slow down your startup time, or cause any problem, unless of course, you get an error message because another program tried to use an entry invalid.  But automated scanners are much too aggressive.  He thinks that an entry is not used, doesn't mean some program, somewhere, some time want.

• Auto unlock with Apple Watch does not appear in my window security and confidentiality

  "Disable the automatic connection' or Auto unlock with Apple Watch" appears in my window security and confidentiality

  Hello

  Automatic unlocking with Apple Watch is available for the Mac models since the mid-2013 and later running macOS Sierra.

  Check that:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your Apple ID use two factor authentication (as opposed to the two-step verification):
    • For Apple ID - Apple Support two-factor authentication
    • If you are currently using two-step verification instead, follow the instructions here to turn off (under "How can I disable two-step verification?") before you enable two-factor authentication:
      • Frequently asked questions about the audit in two steps for Apple ID - Apple Support
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID:
    • On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    • On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password:
    • On your iPhone, open the Apple Watch app, then type the access code.
  • Transfer procedure is enabled on your iPhone and your Mac:
    • On your iPhone, go to: settings > general > transfer procedure.
    • On your Mac, go to: System preferences > General - down, tick the option "Allow transfer between the Mac and your iCloud devices."
    • If these parameters are already enabled, a user has found that it helped to deactivate and reactivate the procedure of transfer on their iPhone.

  More information:

  Automatically unlock your Mac with your Apple Watch - Apple Support

• Several missing files

  Hello

  I have several missing files in my iTunes Music, about 3000 songs, so about a quarter of my library. Some albums are partially there, although all the songs are in the same folder. I can easily locate the songs individually, but I don't have the ability to recover all the missing files, even though I followed all the advice that I found within the communities and by the Google search.

  Everything started when I backed up all my music, then deleted all the music purchased and tried to restore from iCloud, to convert a large number of these in m4a m4p songs so that I could read on my Android phone.

  Although he works initially, as soon as I actually clicked on a track in return convert m4a m4p.

  So I tried to reinstall all my saved music, but now he seems to think that they are all the m4p, when in my collection of current music UI have reinstalled m4a!

  I followed the advice of turingtest2 and run the script to find the missing files, but I get a message during the process:

  The function 'ExtFromKind' needs update to generate the correct file type extension:

  An example of a missing file path is:

  ITunes think the path to the file is:

  file://localhost/C: / users/BLYTHE/music/iTunes/iTunes Media / Music / Compilations / integral Chopin / 3 - 10 Ballade No. 3 in a-flat, Opus 47.m4a

  The correct path when I get on my computer is:

  C:\Users\BLYTHE\Music\iTunes\iTunes Media\Music\Compilations\Ultimate Chopin\3 - 10 ballad No. 3 in A_Flat, 47.m4p op.

  The difference seems to be in the file type. Rather than m4p m4a.

  Any help would be greatly appreciated!

  As a clarification, what I actually did was to use iTunes game rather than iCloud to try convert m4p to m4a files. It does not seem to have been successful, but it was obviously kind of!

• How to transfer pictures from iphone to PC and keep the date, time and place

  How to transfer pictures from iphone to PC and keep the date, time and place

  Hello Grumpelfuerer,

  Thank you for using communities of Apple Support.

  If I understand your message that you want to import your photos from your iPhone 6 s, as well as for your Windows PC. I would like to save my photos on my computer as well. There are two ways to do this. You can use the iCloud photo library allowing to synchronize photos between your devices or import your photos to your PC using Windows Photo Gallery. This article will provide you with the steps that you can use for both options:

  Import photos and videos from your iPhone, iPad or iPod touch

  Best regards