Several networks management

Similar Questions

• Several networks of power line can exist simultaneously in the same electrical circuit?

  Several networks of power line can exist simultaneously in the same electrical circuit?

  Thank you

  Yes, as long as you change the encryption keys can have simultaneous powerline of the networks.

  If two units with the encryption key "HomeplugAV" does not connect with two other units with the encryption key 'HomeplugAV2', but the two pairs will work independent of each other.

  Hope this helps

• Several networks on Time Capsule

  Can someone explain to me why I have several networks? I went through the Airport utility, and I find myself with 5 networks. I understand the 2.4 GHz vs 5 GHz, but it seems to be confusing to some of my mottos (xBox, Wii, etc.). Thank you.

  

  You do not tell us how many airport routers, you might have, but it looks like you have 3 devices... unless you named the guest network the same as your main network.

  Recent versions of the airport are simultaneous dual-band, so they produce a signal Wireless 2.4 GHz and 5 GHz with the same network name.  So, it's 2 networks for a router.

  If you have a second airport, set up to extend or expand the network, then it too will be 2 networks with the same wireless network name. So, it's more than 2 networks for the second airport... for a total of 4 so far.

  Pourriez you have a version of a band unique AirPort Extreme or AirPort Express. So it's 1 over the network.  Or, if you have a recent version of the airport, the scan did not pick up the 'other' network at the time.

  Total... 5 networks.  Quite normal.

  Wireless devices choose the router with the signal the harder... at least in theory... then choose 2.4 GHz or 5 GHz according to their abilities and the distance to the airport.

  Of course, a feature which is 2.4 GHz only will connect to the 2.4 GHz network, then... in theory... it will choose the strongest signal 2.4 GHz of the nearest router.

  If a device can connect to 2.4 GHz or 5 GHz... It will be connected to 5 GHz, if it's in the same room or in immediate proximity to the router. But as signals of 5 GHz are much lower than 2.4 GHz signals, the same device will connect probably in 2.4 GHz if she moves a piece or two away from the router.

• I have several networks that have shown up on my computer I have has not put there

  I have several networks appear on my network card that I did not put there.

  Hi Jim,.

  If they are wireless networks, you can simply pick up your neighbors with powerful transmitters router broadcasts and they do not mean that they have access to your system, but rather that you could theoretically have access to them if they are not correctly fixed.

  It would help greatly to be able to see what you see.

  Can you open the network map and take a screenshot and post on your SkyDrive with all access and then post a link here so we can see what you're talking about?  Here's help on how to do it: http://answers.microsoft.com/en-us/feedback/forum/feedback_other-na/how-to-insert-images-in-ms-answers/94a5cb36-a21f-4a6a-b266-611cf6c910c8.

  Thanks and good luck!

• DELL UPS Network Management Card firmware update is not possible in the management of inverter DELL Multi console

  I have a problem with the update of some old software on a DELL UPS Network Management card in DELL Multi UPS Management Console.

  We have a few more recent and some models with very old Firmware. The older firmware is: 01.02.0013
  I imported the update of the firmware: 01.16.0001
  If I select this version behind the inverter with firmware 01.02.0013 it is a red exclamation point.

  

  Also, I can't get to the this inverter https address.

  So I do not know how update the firmware of the network management card, please anyone who has a solution...

  .

  I got it finally working.

  I couldn't connect to the interface webGui of UPS in https on IE 6,7,8,9 and calibrated to an ssl error Firefox.
  I could not update the firmware using DELL UPS management software can. fatal error.

  I then installed Chrome, when connecting to the web GUI I ignored the warning of certificate error and waited...

  YES. The web Gui appeared, asking for the password and the Web GUI that I could install the firmware 01.14.0003

  After the update of the firmware in the webgui I was able to upgrade to 01.16.0001 in DELL UPS software Multi management.

  

• Need help, reinstall the killer Network Manager!

  I have recently reinstalled windows 10 home because there was a bug in the windows system file that I couldn't fix.

  Now, I have reinstalled windows 10 and redownload all my files and changed my HARD for one SSD drive.

  But, I searched the web and I couldn't find Killer network manager anywhere and I have also asked people in the Alienware Service on Youtube, but they gave me a link that leads to a Support Dell Alienware x 51 with the Killer Network Manager.

  Then I noticed that there is no link for downloading or a button.

  At the time, I also disabled Adblock and Antimalware bytes...

  Please answer as soon as possible

  Best regards, id9e6osoedk

  Hello

  Try this one if it's Ethernet:

  www.dell.com/.../DriversDetails

  Or even this if this is the wireless:

  www.dell.com/.../DriversDetails

• OpenManage Network Manager does not connect to

  I use the 5.1 openmanage Network Manager to manage the switches PowerConnect 7048.

  I am able to manage/monitor switches using SNMP without problems.

  However when I use telnet/ssh it keeps throwing errors saying "1 has failed to authenticate. Please click here for a list of devices that have failed. "trying to manage these devices by default".

  However the document says what needs to be written to the field ID to enable.

  I got it going!

  There was a problem with ssh on my switch. When activated it works now

• Network management problem, computer laptop Windows 7 will not find other computers on any network, however all other computers on the network can access Windows 7 laptop.

  Basically, the issue I'm having is that my laptop does not connect to any other computer to access the actions or other files.  Other computers on the network can access my computer laptop shares and files without any problems.  Operating system is Windows 7 Home Premium x 64.

  What I tried:

  restarted
  uninstalling and reinstalling the files and printers, sharing maps and restart after completion
  all disabled firewall
  tried with IPv6 enabled and disabled without change, so it is currently enabled
  tried on a Wi - Fi and the differences are listed below in the section work (work is wireless)
  able to ping other comptuers
  access to other computers is permitted by other computers

  problem extends over several networks, IE I noticed it at home last night and the followed problem my laptop at work this morning.
  The problem is slightly different on the two sites.

  At home:
  I can see the other computers on the network, but I am unable to access it, even if I have permission, but other computers can access to my laptop.

  At work:
  Cannot even find other computers on the network but they can find and access my laptop.

  I have worked on this problem of non stop for several hours and did much more than what is said, but I am unable to remember everything.  I should have been taking notes: P

  Here are the results of the ipconfig/all command (I removed the physical addresses for security reasons):

  Windows IP configuration

  Name of the host...: Radiation-G72
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : hsd1.ga.comcast.net.
  Description...: Realtek PCIe GBE Family Controller
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR928X Wireless Network adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::f4e3:cd1c:6952:eb4d % 11 (Preferred)
  IPv4 address: 192.168.2.7 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Thursday, February 4, 2010 10:50:32
  End of the lease...: Friday, February 5, 2010 08:29:36
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 234890707
  DHCPv6 DUID customer...: 00-01-00-01-12-4C-6E-91-00-25-D3-3D-FC-9A
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {1797D168-6FC8-4DDF-8338-4E214119C26D}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e74:4ea:2920:b81a:cdc5 (Preferred)
  Address IPv6 local link...: fe80::4ea:2920:b81a:cdc5% 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Asked this question in the Windows 7 forum also because the problem was between windows 7 and Vista.

  Hello

  If it has started, you can try a system restore - an update "might" have caused the problem.

  1. try a system restore back to a point before that happened. And immediately thereafter enter
  Control Panel - Windows updates - top left settings and set it to download and informs you instead
  Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
  to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
  and let this value - manually search for drivers when you think you need. (See how and why to)
  stop day of drivers below.)

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  To uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
  Updates installed - uninstall

  I had completely forgotten the system restore!  While looking into the system restore, I found that when I moved into my new House and has cable Internet installed, the cable technology installed a program of comcast on my computer.  This caused me to not be able to connect with other computers.  After rolling back to install it before it works!   Thank you.

• Default gateway and network management

  Hello

  After installing the initial (via a serial cable), we installed the default gateway on iSCSI network. IP address is defined for the management interface on the network of management as well. Now, we want to access different network management port.

  In fact it should really dg on iscsi network as there is not etc to another network for replication. So if I try to change the dg on GUI does not change me. Can I change the dg on cli or add new lines to the management network?

  Thank you

  With a dedicated management port, you have now two bridges 'by default'.   An iSCSI, one for network Mangement.  The iSCSI Gateway is strictly for iSCSI traffic.  All of the management features will use defined for management.

• Cannot Wireless network Management Application

  We use Cisco Wireless LAN Controller 4400 for two years. Yesterday, we had a report that the Wireless does not work. We found that the problem is Cisco Wireless network Management Application does not start. If I try to start it, I get the network Wireless Application Management with Error 1067: the process terminated unexpectedly. I tried to clean boot, but that doesn't fix it. We have not changed anything on the server. Any suggestions?.

  It seems that the firmware is damaged or the compact flash (CF) is dying.

  Have you tried to reboot the device?

  Have you tried to update the firmware?

• Please recommend network management software

  Hello!

  I need help to find a network management software that is compatible with our switches. I use a network with Cisco/Linksys managed switches:

  10xSLM2008,

  5xSRW208,

  2xSRW2008MP,

  1xSF 300-08

  I was hoping there is management software (not the thing webview/web browser), that could do these things (in order of preference):

  -connect to these SNMP (or similar) to show me a little statistics on each port on each switch, as well as the connectivity between these switches.

  -I would like to know which port what mac addresses and possibly the IP addresses of these.

  -Let me know what mac addresses uses more bandwidth

  -ban a mac address

  I'd be happy if someone could give me advice on what software to buy.

  Best regards

  Lars E Fodnes

  SolarWinds NPM - http://www.solarwinds.com/products/orion/info.aspx

• Several network detected in Windows 7

  I just installed Windows 7 RC. It is perfect to the I n the Network and Sharing Center, several networks are mentioned with one of them being an unidentified network. So, I can't connect to the internet.
  Please help me

  Thank you..
  I solved...
  It happened because of the Hello Service

• How to remove certain network manager network of political lists

  I want to remove a network manager network of political lists, I have unused network

  

  Hello

  Because the computer is connected to the domain, I suggest you send your query to Microsoft Technet forum for assistance:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Thank you and best regards,

  John

• a restart of the network management will affect virtual on an IBM Blade?

  Hi all

  We are running an IBM Blade S with two blades HS22 located on ESX 4

  I would like to add a HS23 on ESXi 5 and then upgrade all three blades to the latest version of ESXi 5.

  I entered in the console HS23 and put up the name / networking details. When I go out, I get a message saying that the management network will be restarted.

  This restart will affect the virtual running on our existing blades? I have to arrest all of them first? If so it's a little bit of pain

  Thank you

  Tracy

  Network management only affects this network hosts to talk to other guests or to connect, but should not affect all guests of this host or any other host.

• Change of IP network management

  Hi all

  ESXi 5.1.0

  I put VM network and network management in the same Standard switch.

  Now, I want to change the IP address of the management network.

  It will disrupt VM Network?

  Thank you.

  I tested it in my environment and would not distrub the vm network. the host will be disconnected and you will need to re - attach return.