Several updates... Why so much?

Similar Questions

• I tried several times, why has it failed my update to Photoshop?

  I tried several times, why has it failed my update to Photoshop?

  Is unclear with the limited information you have provided.  Try to use the updates direct if you are not already doing...

  Direct updates

  https://www.Adobe.com/downloads/updates/

  updates CC:
  http://prodesigntools.com/Adobe-CC-updates-direct-links-Windows.html
  http://prodesigntools.com/Adobe-CC-updates-direct-links-Mac.html

  CC updates of 2014:
  http://prodesigntools.com/Adobe-CC-2014-updates-links-Windows.html
  http://prodesigntools.com/Adobe-CC-2014-updates-links-Mac.html

  CC updates to 2015:
  http://prodesigntools.com/Adobe-CC-2015-updates-links-Windows.html
  http://prodesigntools.com/Adobe-CC-2015-updates-links-Mac.html

• whenever I have send an email on my hotmail that it always freezes when I use firefox! the Explorer is fine. Why so much?

  whenever I have send an email on my hotmail my computer crashes when I use firefox! the Explorer is fine. Why so much?
  This began to happen 1 week ago.
  I tried to uninstall firefox a few times and it still does not work!
  does anyone have a solution?

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  Also, try to bypass the cache

  Reload the Web page while bypassing the cache using one of the following steps:

  • Hold down the SHIFT key and click the reload with a left click button.

  OR

  • Press Ctrl + F5 or Ctrl + SHIFT + R (Windows and Linux)
  • Press command + SHIFT + R (Mac)

  If it does not help disable HWA used in firefox.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

• Windows 8 update took as much memory or not?

  There are (like 4 days ago) from a few days I have 122 GB of free space on my laptop. When I closed the computer, the only option I had was "SHUT DOWN and UPDATED" and 'RESTART & UPDATE' so I chose stop & update... It took long hours updated... My installation was 13 of 17 and he did not move during these hours. So I decided to force shut down my computer.

  When I turned on my computer, I now only have 116 GB of free space... I thought that maybe the update ate as much memory. But a few minutes later, he went to 114 and 113 GB... I have not installed any other software or downloaded any file that would run up to 1 GB. I don't have.

  So today, yet have not download anything, I only 104 GB left! Can anyone help? Why I feel this kind of question. Thank you.

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• Updated - why does Devil Kapersky and how long will be Kapersky wouldn't go again.

  Updated - why does Devil Kapersky and how long will be Kapersky wouldn't go again. I don't want only it off too long because it's my security protection

  As by Kaspersky Lab announcement lying, today should patch : beta test begins to eliminate the problem of Firefox compatibility, see;

  • http://Forum.Kaspersky.com/index.php?showtopic=224799

  but you can surf the Internet without worry, if your Kaspersky software is green, database are up-to-date and active antivirus web, it analyzes web traffic independently. The addon are just shortened virtual keyboard and other things but the main protection is enabled, everything is good.

• Error 80070002 for several updates

  Hello, I get the above error message when you try to download and install several updates of windows: KB979916, KB982526, KB983590, KB2416471, KB976098, all updates and associated with .NET Framework. (That I can tell. The last update can not be.)  This happens on a laptop running Windows 7 x 64 Home Premium.

  I tried several fixes such as "Microsoft Fix it 50202" the Windows Update troubleshooting tool turns on again there is no problem. Recent responses of the forum suggested DataStore and Download C:\Windows\SoftwareDistribution records, but this cleaning solution also proved ineffective.

  I generally find my own way out of problems such as this one, but I'm in over my head on this one. Thanks in advance.

  Microsoft .NET Framework 3.5 SP1 update for Windows 7 and Windows Server 2008 R2 for x 64-based systems KB982526 is an option, not related to security which can be hidden, if you want to update.

  `~`

  KB983590 see if this sugesstion can help you: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/b577786a-682c-40df-9212-c7d94418aa10>

  `~`

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  `~`

  Windows Update Error 80070002 http://windows.microsoft.com/en-US/windows7/Windows-Update-error-80070002

• Is it possible to change the menu of windows update to the much more functional version?

  Is it possible to change the menu of windows update to the much more functional version? The change took place on 07/10/09 and made by selecting which updates to install more troublesome. * Note * I do without roll back Windows Update 7.4.7600.226 Agent that has been installed on 10/07/09.
  This change of format is also just change the switch on for windows 7?

  Hello

  Welcome to Microsoft Windows Vista community forums!

  I am sorry to say that there is no choice left out. You must perform a system restore or uninstall the manual update that is installed.

  Improvements made to the version of the Windows Update Agent 7.4.7600.226

  • Time sweep improved for Windows updates
  • Improved user interface for Windows Vista and Windows Server 2008 - based computers that are running Windows Update
  • More visible and detailed description of updates
  • Improvements in the way in which users are informed about service packs

  For more information, please see the link below:
   
  http://support.Microsoft.com/default.aspx/KB/946928

  Kind regards

  Savan - Microsoft technical support.

• Do not install several updates

  * - Original title - installation of updated several tests

  I tried to install several updates several times, and I get a message "failed" with no error code.  The updates are KB963093, KB970430, KB951535 and KB98073.  Any ideas?  KB963093 tried at least 15 times in the last 2 days.

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  4. do you have service pack 3 installed upgrading?

  I suggest you to follow steps M1 and M2 of this article and check if that helps.

  Error code 0 X 80248007 when you try to use Windows Update or Microsoft Update to install updates: http://support.microsoft.com/kb/958046

  I hope this helps.

• Sunday 15 May 2011 after trying to use Microsoft Update why I get the following error message? [Error number: 0 x 80070020]

  Sunday 15 May 2011 after trying to use Microsoft Update why I get the following error message? [Error number: 0 x 80070020]

  Hi MikeGoodold,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

• Is there a way to hide several updates?

  In Vista and upward, it is possible to tick/check/select several updates. What's the point if you can't actually choose to hide unwanted language packs 34 etc.?

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download them one at a time

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  Mick Murphy - Microsoft partner

• I downloaded several updates available for Windows Vista and since that time, I was not able to access my emails. I use netscape and the page opens and freezes.

  I downloaded several updates for vista (no critical updates) and since that time, I was not able to access my emails. I use netscape and the page opens and freezes. What should I try?

  original title: EMAIL GEL

  Hello

  What updates do you have installed?

  Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig in the search box
  2. press ENTER.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• Windows could not install several updates

  My daughter portable computer has been impossible to install several updates in October.   More precisely, KB3000988, KB2984005, KB2972101, & KB2987107 install, however, they are the ones who install - I have been able to get the other ones installed.

  I ran windows update so that the PC was in clean boot mode (all unextinguished Microsoft services/applications).

  I also disabled Windows Defender (the only Antivirus which I'm running).

  I also ran the troubleshooting of Windows Update and there a number of things to be fixed.   I did this first and the updates still do not work.

  Here is a link in my event log

  https://onedrive.live.com/redir?RESID=5078BE589B6E628C! 4166 & authkey =! AHt4LZUYUo7r-Jw & ithint = the file % 2cevtx

  Here is a link to my system log

  https://onedrive.live.com/redir?RESID=5078BE589B6E628C! 4167 & authkey =! AMM-Cp12j8hjQeE & ithint = the file % 2cevtx

  Here is a link to my system info

  https://onedrive.live.com/redir?RESID=5078BE589B6E628C! 4168 & authkey =! APIKqjSx1-AzW1E & ithint = the file % 2ctxt

  Please let me know what I need to do about it.

  Thank you!
  Jason Keating

  misslouis - I've updated one of the PC to win 8.1 and stopped the updates failed.   I've also updated to another's and all seems good.  Thanks for the tips!

• APXINWKB: ERROR FRM-40105 AFTER SEVERAL UPDATES TO FDF INVOICE

  Hello

  I enabled AP invoice header FDF and I am facing after publication.

  Scenario of
  1. display an AP invoice in the invoice workbench
  
  2 - Click on the header flexfield and update. Save the changes.
  
  3. without re-mark Bill, update any header flexfield (i.e. a second flexfield update), and then click Ok to save the changes. Results:
  b in the summary Bill block, the cursor moves to the next line, creating a new invoice
  (b) error message is displayed in the toolbar State APXINWKB:
  FRM-40105: unable to solve the reference in article
  
  4 - Click back on the original Bill, to display the message with this error:
  APP-SQLAP-10186: Please validate or clear your changes before continuing.
  
  Click Ok, then get this message box:
  Do you want to save the changes you made?

  
  

  I followed after discussion on metalink

  
  

  https://support.Oracle.com/epmos/faces/DocumentDisplay?_afrLoop=402258910466899 & ID = 1386884.1 & DisplayIndex = 1 & _afrWindowMode = 0 & _adf. CTRL-State = ok9fn34gb_127

  
  Bug 13512892 : APXINWKB: ERROR FRM-40105 AFTER SEVERAL updates TO BILL FDF

  https://support.Oracle.com/epmos/faces/BugDisplay?_afrLoop=401729639374078 & ID = 13512892 & _afrWindowMode = 0 & _adf. CTRL-State = ok9fn34gb_77

  
  

  Bug 7609800 : Could not CLOSE THE POP-UP ERROR of FDF ON BILL AP.

  https://support.Oracle.com/epmos/faces/BugDisplay?_afrLoop=401753618582257 & ID = 7609800 & Refresh = N & _afrWindowMode = 0 & bugProductSource = _adf & Oracle. CTRL-State = ok9fn34gb_102
  

  
  

  Got the hotfix mentioned in Bug 7609800 applied on my instance but still question exist.

  Please help if anyone knows the solution to this problem.

  
  

  Thank you
  

  
  

  
  

  Hi Cheryl,

  My problem has been resolved, just wanted to share it here.

  I created a folder with no query and set it to the default value.

  Then I moved the FDF which was originally at the end of the header to a few fields left line. It is not at the end.

  This way my problem has been resolved.

  Hope this will help if someone else must face the same question.

  Concerning

  Siraba

• I have CS5 and adobe update reported that I have several updates of loans - when I started the update, it failed at every update.  Please notify.

  I have CS5 and adobe update reported that I have several updates of loans - when I started the update, it failed at every update.  Please notify.

  Please see:CS5 updates fail

  Troubleshoot update | CS5, CS5.5, CS6

  I hope this helps.

  Concerning

  Megha Rawat

• I downloaded creative cloud several times, why does the Bureau not appear after installation?

  I downloaded creative cloud several times, why does the Bureau not appear after installation?

  Sure Trudi.

  The agent would be able to connect to your machine and solve the problem.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• Several update is no longer available in Folio Builder

  I've just updated to the new Folio Builder. I found the old man a frustrating that you cannot select several items to update, but at least one article was loading I could start the following. But now I can not do same. I have to sit and wait, watching for when each article updates to start the next. I have many items and some are great. This process now takes forever. I'm not impressed. Is there any work around several updates of the article?

  It was indeed an intentional change. Simultaneous downloads within one account caused corrupted documents. We are unable to provide this functionality because of the risk inherent in the content.

  I think that the suggestion of user interface provide multiple selection-action article is very thin. I'll drop it and take credit for it myself (I'm kidding). It would be certainly worth investigating.

  Thank you.