SG 200 - 08 p - PC connection and phones

Similar Questions

• My laptop Windows XP seems to want to treat my broadband as a dial-up connection and, of course, there is no phone line hooked up.

  My laptop Windows XP seems to want to treat my broadband as a dial-up connection and, of course, there is no phone line hooked up. I tried to create a new connection to broadband under network connections and also, the unit seems to work fine. Any suggestions please?

  original title: I can't connect to the internet.

  Hi anthony meechan,.

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• Tablet and phone Layouts not connected to the desktop computer

  In the instructional videos and documentation I've seen on Muse, it is said that there should be a + mark next tablet buttons and phone in map mode. I created a site of office but the + marks are not on the tablet buttons and phone. I know that I need to copy the content to the empty pages, but empty pages are not even created for... which, in turn, means me that page attributes and metadata must be copied layout available. Someone know how I can connect my layouts of Tablet and phone my office layout? Thank you.

  Hello

  If the sign is not there, it means the provision is already created, if you can not see empty pages when you go to a special provision, you can right click and delete the page layout. The sign will come back and you can add the layout again.

  Kind regards

  Aish

• Why the back my mail list, text and phone iphone 6 freeze after upgrade ios10

  Why my list of e-mail, text and phone iphone 6 freezes after upgrade ios10?  Have you tried to turn it back on.  Becomes a real pain in the uknowwhat.

  I had the same problem at first but I was testing the first version of ios 10.  but the reason may be due to the low storage? If your storage space is ok please go to settings then general try to look for the software update again just to make sure that you use the latest version of ios usually there a few times an update immediately. If none of these solve the problem, try now button the power button and the home button at the same time (the screen of your iphone turns off a few seconds) touches both simultaneously when you see the apple logo on your screen if all else fails you can try connecting your device to itunes on a pc and run a quick diagnostic test? you go to itunes on a pc if you have already installed on your pc, laptop etc... Look at the upper left side... Click the help... Go to the bottom of the list to "Start the diagnosis" (make sure that all the test boxes have a tick and click ok to run the test) PLEASE NOTE your iphone you will need to be connected to the computer before hand... hope this will help you know if there is a problem, but when I came across this problem with my camera it was because my storage was almost full on my device and in icloud if This is the case then you need to maybe buy more storage or delete applications or games, you do not use this should help solve the problem of storage (if your device is low on storage)? hope this helps somehow.

  Nice day.

• Firefox crashes whenever I connect my phone to the Internet

  I just connect my phone to the Internet whenever I'm on my home WiFi network or Internet connection high speed, so I only use my part-time phone data connection. But whenever I plug in my phone (a X Starmobile KNIGHT, KitKat) Internet, Android always tells me, unfortunately, "Firefox has stopped." Did Firefox optimized for those who have "always - on" connectivity to the Internet? What are the possible workaround solutions for this?

  Hi Bonarae,

  Firefox shouldn't be gel like this; Looks like something is wrong.

  Could you try to remove Firefox and then reinstall it to? Maybe with a new start, Firefox will be better behaved.

  Warning: this will wipe all your data Firefox from your phone - including bookmarks, history, etc.

  To do this:

  1. Open the game Google store
  2. Search for "Firefox".
  3. In the search results, tap on Firefox to see full information
  4. Press the button Uninstall
  5. Once the uninstall is complete, click install to reinstall Firefox.

  Let us know if this solves the problem!

• I have an internet connection, and now Remote app does not work with my Apple TV.

  Hello

  My Apple TV remote broke so I use the Remote App on my phone, but we recently got a new router and network connection and so now it is impossible for me to use with my Apple TV because I can't update the wifi settings so that it can connect to the new wifi... How should I do? I can't update the wifi because I need the TV and my iPhone to be connected to the same wireless network for do, which is impossible. Appreciate any help!

  Use the remote device provided with the ATC to access settings and change the information of WiFi.

• Ink advantage 2545: changed the name of the wireless router and now ink advantage 2545 does not connect and I'm out of ideas

  I have a Toshiba laptop 64 bit running Windows 10 Home, 8 GB, 1 t hard drive.

  Router is a Samsung phone using Android because it was the only router that I could find which would take the wireless signal.

  I live very pastoral, no neighbours for miles, so I never saw the need for a password on my router.

  Now, some people are installs in less than 400 feet from me, and I think they're piggybacking on my Wifi because my access speed has slowed considerably since they moved in.

  So I decided to change the password of the router, unfortunately, I can not put in any password I want.  It gives me the opportunity to have a predefined password.  So I changed the name of the router I could do without problem.

  My computer very quickly without any problem, however, my printer which worked great for a year with the old router name does not connect on the new name of the router.

  Here is what I tried:

  I had hoped he would ask me for a new name / password, but it did not.

  Then I plugged a cable between the printer and the laptop in the hopes that it would produce a different kind of results.  It has not changed anything.  There is no screen menu on what that be like this on the printer.

  I pressed the wireless button that has the flashing blue light and nothing happened.

  I pressed the button, don't know what it is, but it has a white light, and nothing happened.

  I went on the HP site and followed the instructions but he just said do not connect the cable until told to do so.  So I disconnected everything, lights out and turned back on and still no connection and no invite to plug whatever it is.

  Y at - it everywhere where I have being a novice could get instructions on how to get this working?

  I appreciate any help you can give me.  Thank you.

  Hello

  I think you are talking about SSID. Please, think of it as a new router and use the following ways to correct:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
  
  Kind regards.

• iTunes ask me to upgrade iOS that I've already updated. How to stop it because it is worrying, whenever I am connected my phone with itunes to sync something he remembered

  I've already updated iOS 9.2.1 in my iPhone 6 more but whenever I connect my phone via laptop, iTunes update me of iOS 9.2.1 recalled. Whythis happened when in fact I've already updated with her? Pls someone answer me. Thank you

  Try restarting your computer and signing out and back in to your account.

• How do I link my hp2540 of my Tablet and phone

  How can I sync my hp2540 to my Tablet and phone

  Hello @Estatebabe,

  Welcome to the Forums of HP's Support. I understand that you want to connect your Tablet and phone to your Deskjet 2540. I would like to help.

  I guess it depends if you are willing to connect through Direct wireless or use a current wireless network.

  It depends on what operating system is your Tablet and phone.

  You try to connect via Wireless direct or via a local network?

  If you try to use a local area network, the printer is connected to the network?

  Are your mobile devices using the Android Apple iOS operating system?

• Bluetooth Driver missing wbe try to connect Samsung phone

  I have the same problem, the driver for the bluetooth connection is missing. Unfortunately, there is no disc that came with the phone. And it is not all drivers for download on the Samsung website.

  Best regards, Reinhard

  Hello john_moo,

  Samsung is ultimately responsible to write software to connect the phone to Windows and drivers.  If they do not provide these drivers, we want to see if they offer alternatives.

  Best regards

  Matthew_Ha

• Can't the IMPORT of NEWS photos of camer and phone without duplicating all of THE 'old'!

  I have a HP G60 - 445DX Notebook PC with Windows Vista. I am certainly in need of a new computer, but have given up pretty much to import pictures from my cell phone and a digital camera because it never detects the latest photos taken more! I have literally THOUSANDS of duplicates at this stage. I just connected my phone to try to import pictures from the family vacation last week, and it has detected more than 7,000 photos! ... that would be all THE photos stored on my phone files! I went through this before, and in desperation, waited for-e-ver and allowed pictures of transfer (with resulting from thousands of duplicates). Is there a solution? I went in the gallery settings photo and fact ensure that the import settings were on Original filename... and went to Microsoft updates and necessary update is no longer available for security reasons. Help! UGH! Photo gallery becomes a unmanageable mess of useless!

  Hi Erin,.

  I would like you to manually copy the images in a folder of documents and check if it helps.

  This will help us know if the problem is with the photo gallery of Windows folder or file documents.

  For duplicate files, I suggest you to see the procedure in the following Microsoft article and delete duplicate images.

  Eliminate duplicate files

  More information, see the following Microsoft article.

  Windows Photo Gallery: frequently asked questions

  Keep us updated on the status of the issue.

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************

• connection and installation of router

  From the beginning, when I bought the years WRT54G the CD never worked there. I had to call tech support to guide me through the phone (he admitted that I could not install with CD). Now when I crashed and lost or corrupted settings in my computer (XP) and there is no guarantee of more I have to use the manual installation to reinstall. My question relates to the stage where I'm supposed to 'renew' ip address of my computer by using the command function. If I go into the command to change this ip address, which affect the dsl service my ISP gives me, as well as internet access or programs will not install on my computer? Why should I change the ip address of the computer?

  Eureka! You are a genius scrooge. Thank you! Your suggestions worked, and I write this response on my wireless computer. Why is - what the Linksys utility (s) cannot take into account these parameters?

  More dare I say, opening a session on this forum is always a roundabout confused circle compared to any other forum, in that I never recorded.  For example, if I wanted to reply to your message I think advising me in my email, what is the direct procedure to connect and answer without having to do a search after error messages telling me I do not exist, the message has been deleted, or I'm not authenticated etc. ?

  Thanks again

• When I try and send a file to my laptop I get this error: "bluetooth device not found please make sure that your bluetooth device is propably connected and turned on."

  original title: BLUETOOTH PROBLEM Please HELP!

  When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".

  Make sure that your bluetooth device is propably connected and turned on. »

  In addition, the mobile is unable to send any file to computer th.

  I've already matched the mobile with the computer and I use windows 7 please help.

  
  

   

  When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".

  Make sure that your bluetooth device is propably connected and turned on. »

  In addition, the mobile is unable to send any file to computer th.

  I've already matched the mobile with the computer and I use windows 7 please help.

  
  

  Hey xtheultimatethinkerx

  Here is the vista forums

  Try the repost in Forum windows 7 the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

  Walter, the time zone traveller

• Color LaserJet pro 200 M276nw MFP - Scan configuration and installation on Mac Yosemite

  Hi all

  I just bought a new LaserJet pro 200 color MFP M276nw and I am trying (for 4 days) to coorectly install it.

  My goal would be to use it via the wifi connection and I put it correctly by the façade.

  When I try to install the printer on wifi, I can install the printer driver, but I can't find the driver for scanning.

  I tried to connect by ethernet and the system to emphasize a multifunction scanner and the printer driver. If use them, it works correctly.

  Whenever I go out the lan cable for use in wifi it lose the scan functions.

  What I am doing wrong?

  Thank you

  Gianluigi

  Hi @gianluigi1982 ,

  I see that you have problems with scanning via the wireless network, but you can scan through an Ethernet connection.

  I would like to help.

  Do you have what drivers installed the printer? (Apple update or the 10.9 download drivers)

  I checked our laboratory with 10.10 installed on this computer and I was able to browse for printers and Scanners on the wireless network.

  Check the version of the driver installed.

  Go to the Apple preferences system, printers, and Scanners, highlight the Laserjet printers, click the print tab on the right side of the window, and select the Options and supplies.
  Under the general tab it will give the list the version of the driver.
  19.9 is one on the lab.

  Which driver you have show?

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (MFP Laserjet Pro 200 M276)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  In the printers and Scanners window, highlight the printer on the left side, to the right of the window, you should have a print/scan tab, click Scan, and then open Scanners and test scanning. If you do not have the scan tab, let me know.

  

  Have you added the printer as your Hello or via the IP protocol? (cannot scan through the IP Protocol)

  You use the automatic IP address or your own static IP address?

  Here is some information for scanning in OS X v10.10 Yosemite without software HP.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.