Share permissions Windows Server R2 2012 - Folder Redirection-

Similar Questions

• What "unmapped user access" for NFS share in Windows Server 2008 R2?

  In the beginning, I followed this Youtube video to set up an NFS share in Windows Server 2008 R2:

  https://www.YouTube.com/watch?v=BQ8Q_vsiksg

  Please note that the default option to allow to access Unix unmapped user is not changed (to about 1 min 57 sec).

  Then I found another article at http://www.vmwarearena.com/2012/07/create-nfs-datastore-for-esx-in-windows.html

  But in this article, I like to select allow anonymous access (instead of allow access Unix unmapped user).

  So who is correct?  Or both are correct (which means that this 'unmapped user access' is not serious)?

  And why should we have to allow root access (in the NFS share permissions dialog box)?  What a security risk?

  Thanks in advance.

  Have you tried to run through the steps taken from the blog of VMware?

  How to enable NFS on Windows 2008 and currently at ESX | Insider - Articles from VMware VMware support

  Also, there are 3 KB articles to know in case of potential problems

  1. http://kb.vmware.com/kb/1004490

  2. http://kb.vmware.com/kb/1003967

  3. http://technet.microsoft.com/en-us/library/cc753302 (WS.10) .aspx

  Noting in particular this section

  Share the folder of Windows for NFS

  To share the folder of Windows for NFS:

  1. Right click on the local folder you want to share via NFS.
  2. Click NFS share.
  3. Type the name for the share. For example, NFS-VMFS01.
  4. Delete to allow anonymous access.
  5. Click on permissions.
  6. Change the type of access in reading + writing and select allow root Access.

• Hyper-V backup fails VSS in Windows Server R2 2012

  When I try to do a backup of a VM (just the virtual machine, nothing else selected) on my Windows Server R2 2012 machine, I get the following error:

  I still have to find an answer to this question.

  Log name: Application
  Source: SPP
  Event ID: 16387
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: BitVault
  Description:
  Microsoft Hyper-V VSS Writer writer experienced an error during the creation of the snapshot.  More information:.
  The event XML:
  
   
     
      16387
      2
      0
      0 x 80000000000000
      2746
      Application
     
     
   
   
      Microsoft Hyper-V VSS Writer
     
     
      Writer experienced a transient error.  If the backup process is started, the error does not happen. (0x800423F3)
      Unknown error (0x80004005)
   
  

  It's about getting the VSS event log

  A VSS writer has rejected an event with error 0x800423f3, the writer experienced a transient error.  If the backup process is restarted,
  the error does not recur.
  . The changes that the writer made to the writer components while managing the event is not available to the applicant. Check the event log for events from the application hosting the VSS.

  Operation:
  PrepareForSnapshot event

  Context:
  Execution context: writer
  Writer class ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
  Writer name: Microsoft Hyper-V VSS Writer
  Writer Instance ID: {4736e32f-5954-4b83-9ca5-37c560f308d5}
  Command line: C:\Windows\system32\vmms.exe
  Process ID: 3556

  PS C:\Users\Administrator > vssadmin list writers
  vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
  (C) copyright 2001-2013 Microsoft Corp.

  Author name: 'Task Scheduler Writer'
  The writer ID: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
  Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
  Status: Stable [1]
  Last error: no error

  Writer name: 'recorder VSS metadata store.
  The writer ID: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
  Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
  Status: Stable [1]
  Last error: no error

  Writer name: 'Performance Counters writer. "
  The writer ID: {0bada1de-01a9-4625-8278-69e735f39dd2}
  Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
  Status: Stable [1]
  Last error: no error

  The writer's name: "System Writer".
  The writer ID: {e8132975-6f93-4464-a53e-1050253ae220}
  Writer Instance Id: {2ff32bb9-b4dd-4959-bfa9-7ea79b4567ba}
  Status: Stable [1]
  Last error: no error

  Author name: 'ASR Writer.
  The writer ID: {be000cbe-11fe-4426-9c58-531aa6355fc4}
  Writer Instance Id: {4b7e63c6-ecb1-47f2-b317-e665b5de8c8c}
  Status: Stable [1]
  Last error: no error

  Author name: 'Microsoft Hyper-V VSS Writer.
  The writer ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
  Writer Instance Id: {4736e32f-5954-4b83-9ca5-37c560f308d5}
  State: [8] failed
  Last error: error renewable

  Author name: 'Dedup Writer'
  The writer ID: {41db4dbf-6046-470e-8ad5-d5081dfb1b70}
  Writer Instance Id: {5ac93c0a-dc01-4564-bac9-23051e2783a7}
  Status: Stable [1]
  Last error: no error

  Author name: 'Shadow Copy optimization Writer. "
  The writer ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
  Writer Instance Id: {a24b7ea7-e48b-44eb-9521-585648b7951b}
  Status: Stable [1]
  Last error: no error

  Name of the author: "COM + REGDB Writer".
  The writer ID: {542da469-d3e1-473c-9f4f-7847f01fc64f}
  Writer Instance Id: {b9b0674c-119c-4345-870d-fadc0e7beda4}
  Status: Stable [1]
  Last error: no error

  Author name: 'Registry Writer'
  The writer ID: {afbab4a2-367d-4d15-a586-71dbb18f8485}
  Writer Instance Id: {30a6302b-d5c8-4b9a-a0b7-61049e1c4767}
  Status: Stable [1]
  Last error: no error

  Author name: 'WMI Writer'
  The writer ID: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
  Writer Instance Id: {74ee0321-a546-4f94-a624-c715f2290db4}
  Status: Stable [1]
  Last error: no error

  PS C:\Users\Administrator > Get-VMIntegrationService - VMName

  VMName name active PrimaryStatusDescription SecondaryStatusDescription
  ------ ----                    ------- ------------------------ --------------------------
  Home time true synchronization OK
  House real Heartbeat OK OK
  Pair key / value of home Exchange real OK
  House real stop OK
  House VSS True contactless
  House Guest Service Interface fake OK

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet Hyper-V Forum.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverhyperv

  See you soon.

• Windows Server Std 2012 R2 domain controller

  Hello world. We have problems in the domain controller with Windows Server R2 2012 in the VM that it helps domain users to connect to the DC remotely with admin rights. We have already allowed group policy by default on the management of the user rights that allow remote only for domain administrators. We did not refuse access, because the new user must be added to each new user creation. We do not want to use distribution of the Group deny. is it possible to access remotely to DC?

  Thanks in advance.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Help stuck in Windows Server R2 2012 kernel mode

  I have recently installed windows server 2012 r2, which turns out to be the right product, I was after and now can't get out of kernel mode and get stuck looking at the command line. I tried "Install WindowsFeatures Server-Gui-Mgmt-back running, but this only loads to 68% then fails because it cannot download the source files.

  I want to delete r2 Windows Server 2012 and return to the old windows 7 I had installed. Are there documents, or methods of removal of windows server r2 2012 or restore my old windows, I would like to know please.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.msdn.Microsoft.com/Forum
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil

• Windows Server R2 2012 building a drop zone

  Hi people, smart

  Advice or you advise how to build Windows Server R2 2012 as a jump of boxes in the demilitarized zone and to connect to the internal networks of the company for external suppliers... all recommendations or help much appreciated.

  M

  Hello

  Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  Windows Server forums

  Thank you.

• Can upgrade you Windows Server 2008 RC with SP2 to Windows Server R2 2012 with the option to upgrade?

  We currently have the server running Windows Server 2008 RC with Service Pack 2 installed. We want to upgrade to Windows Server R2 2012 with as little cost involved as possible. You can run the upgrade Windows 2012 Standard R2 of the disc on a Windows Server 2008 SP2 RC 64-bit environment?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Can we use Windows Server Standard 2012 license on Windows Server 2008 R2 to company where some applications do not work?

  Hi support them.

  We intend to buy a new license for Windows Server Standard 2012 that we have been informed of this business license Windows Server 2008 R2 are no longer available. But where some of our applications do not work on the new OS, can we still use the new license if we intend to install Windows Server Enterprise 2008 R2? Appreciate your response.
  Best regards

  Hi Glen,

  The question you have posted is linked to the License Server 2008 and 2012, and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Hope it will be useful.

• Configurable TD & x2APIC Mode Bios under Windows Server R2 2012

  Question about the settings of the Bios for Configurable TD & x2APIC Mode on Windows Server R2 2012.

  CPU 2 each Intel® Xeon® Processor-E5-2680 v4

  What are the best settings for the CPU plus top MHz high power Turbo is for the two parameters below?

  Configurable TDP - Normal or - level 1

  X2apic-on or - off mode

  Its use is for BOINC CPU as PrimeGrid project

  Thank you

  Hello

  bcavnaugh

  What are the best settings for the CPU plus top MHz high power Turbo is for the two parameters below?

  None of these options will affect the States of frequency or the power of the CPU.

  bcavnaugh

  Configurable TDP - Normal or - level 1

  It is a power and a cool option. Nominal will set fans operate at normal speeds. Level 1 will decrease the speed of the fans.

  bcavnaugh

  X2apic-on or - off mode

  This enables or disables the new method of communication of the CPU. This should only be disabled if the operating system does not support. The processor will work more effectively by enabling this option. It can affect performance, but not in the States MHz or raw turbo.

  Thank you

• My dealer told me that if I have an ad server using Windows Server R2 2012, specifications minimum PC user must be Windows 7 SP 3?

  My dealer told me that if I have an ad server using Windows Server R2 2012, specifications minimum PC user must be Windows 7 SP 3?

  I googled a lot and could not find anything on Windows 7 SP 3. As far as I know it's only SP 1.

  My AD will work?

  There is only one service pack for Windows 7. W7 SP1 works perfectly.  (There is a service pack 3 for Windows XP. Perhaps it is the mentioned minimum version.)

• Service Update Manager 5.5 crashing on Windows Server R2 2012

  Hello

  I try to get VUM 5.5 1 c working on a Windows Server R2 2012, but without a bit of luck.

  Everything installs correctly, Setup detects 32-bit DSN pointing to our SQL 2008 R2 server and database connectivity works. However, as soon as I am scanning an ESXi host available updates the vSphere VMware Update Manager service fails and a dmp file is created under C:\ProgramData\VMware\VMware update Manager\Logs.

  Just to be sure I installed Crossover on another server in W2K12R2 own, but the end upwards with exactly the same problem. When I install the product on a Windows Server 2008 R2, it works very well.

  According to the VMware 5.5 VUM compatibility matrix works with W2K12R2, but this isn't for me.

  I enclose the vum-vmware-server log file that contains information about the accident of service.

  Best regards

  Rutger

  Hello

  I solved my problem after watching journal line complain about missing path:

  C:\ProgramData\VMware\VMware update Manager\Data\host_upgrade_packages\esxi-up to date - woosktebvs

  I created this path and copied the existing content

  C:\ProgramData\VMware\VMware update Manager\Data\host_upgrade_packages\esxi-up to date - bbylallekd

  him (there were new files with the date 09/09/2014)

  VUM scan and decontaminate works for me now without accident service VUM.

  HTH

  Richard

• ESXi4.0 mit iSCSI unter Windows Server R2 2012

  Hallo Zusammen,

  ICH habe einen Windows Server R2 2012 acquired, den ich mit ob virtuellen iSCSI drive Assembly konfiguriert habe.

  In meiner environment are offers drei Essentials ESXi server. 1 x 5.5 Version und 2 x Version 4.0!

  Die Version 5.5 konnte ich problemlos mit dem iSCSI drive Assembly auf dem Windows Server R2 2012 verbinden.

  Nur unter den Versionen 4.0 independent keine drives. Die über IQN ist available connection. doch're keine Geräte werden in der Übersicht displaying.

  Einzigste der Unterschied, der mir zur Version 5.5 auffiel ist der, dass ich sleeps noch eine weitere Konfigurationsmoglichkeit habe, die mir allows, die Netzwerkkarte correspondingly portals zu fugen über die der iSCSI data traffic laufen soll.

  These Reiter habe ich nicht bei ESXi 4.0. Konnte are daran liegen? Oder habe ich noch eine Einstellung vergessen will?

  Vielen Dank fur eure Hilfe Vorab.

  Little Grüße

  Daniel

  Hi Tim,.

  Vielen Dank fur deine Antwort.

  Sie hat mir village. STIs are die nicht die Lösung war. Sie hat mich der auf die Fahrte gebracht right. Und zwar ich den Namen-DNS of Zielservers im tab had discovered dynamic angegeben. Diesen konnte er nicht auflosen und fand somit kein drive Assembly. Depending on ich die angab IP, fand er auch die body. :-)

  Beste Grüße

  Daniel

• How to install Flash Player on Windows Server R2 2012?

  What should I do to get the Flash Player installed on Windows Server R2 2012?

  Apparently Microsoft is including Flash in Internet Explorer by default

  In server 2012 / IE11 flash is installed by default by turning on the desktop experience.

  http://www.electronerdz.com/2014/10/Adobe-Flash-on-Windows-Server-2012/

  8769f0ea03/how-do-i-install-Flash-player-in-Server-2012?Forum=winserver8gen https://social.technet.Microsoft.com/forums/windowsserver/en-US/4a178833-1fe0-4cec-81B0-BB

  http://arstechnica.com/information-technology/2012/06/Internet-Explorer-10-embedded-Flash-do-not-track-and-stable-standards/

• Adobe Reader DC contains errors and crashes with Windows Server R2 2012

  We have recently installed Adobe Reader DC Adobe version on our servers Windows Server R2 2012 and have problems since its launch. Few of the questions that we have seen are as follows:

  1. This version is a little awkward and crashes.
  2. A lot of pop up boxes that appears whenever I open a document.
  3. Whenever I open a document it is a box pop up welcome
  4. It is a little slow to respond between clicks
  5. If I click on options like file. The application hangs and then crashes. (see crash message attachment)

  Any help to solve this problem would be useful.

  Thank you

  
  

  Questions for users confronted with this question:

  1. do you have the preview pane enabled in file Explorer? If so, you can temporarily disable it to see if the problem goes away? On Windows 8, in Explorer, go to the view tab, and if you press the button "Preview Pane", UN-press it. On Windows 7, upwards to the right (to the left of the help icon) there is a button "show preview pane." UN-press it.

  2. ensure that the following directories exist on your machine. If this isn't the case, please create them:

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheAcro

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheRdr

  Replace USERNAME with your username.

  Is - do this 1 or 2 to solve this problem?

• Windows Server 2012 - Folder Redirection

  This may sound stupid :/

  On my school network my folder redirection is //SERVER/%USERNAME% but can not get group policy to do this on my own server it must be / / SERVER/PART... How would I set up so my folder redirection goes to the root of the share network IE. Server/ksayer instead of/server/users / ksayer, I need a storage attached to the network?

  Sorry sounds really confusing, but I'm not a full pro again (y)

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.