Shared folders is longer supported?

Similar Questions

• Shared folders / printer is no longer available

  I replaced my WRT54G V5 with an E3000 router default.  I installed using a cable (wireless) Dell desktop (Windows XP SP3) and it works.  I've changed the SSID and password which was used w / the WRT54G V5 and my HP desktop computer (Windows XP SP3) wireless and wired HP laptop (Windows 7) can both can access the Internet.

  Problem is that shared folders on all systems, and a shared printer on the desktop HP wireless are more accessible.  They worked with the WRT54G.  How can I make them work on the E3000?

  It may seem that the trusted computers.  Click the Norton or MacAfee and look through the various settings.  You will eventually find it.

  I use Avast free home antivirus and firewall windows on all my computers.  Use Norton in the past and he would let viruses through

• ReadyCloud users do not see the contents of shared folders

  Hi all

  As long as user ReadyCloud with read/write access I can't see the contents of shared folders. (See photo).

  

  If I login with the user admin of ReadyCloud although I see the content in the shared folders.

  Is this a known issue? Can someone help with this diagnosis?

  Firmware: 6.5.2

  I checked with the NETGEAR support

  They should be for the suite of measures:

  -Check the DNS entries, add 8.8.8.8 and 4.4.2.2

  -Let ReadyCLoud and join. Invite users.

  Finally I "Reset permissions" on the tab "File access" to all shared folders. It worked for me!

• Cannot download Photo Story 3 and receive the message error "this version of the program is no longer supported.

  Original title: Why the * (& % $% if I can't download Photo Story 3)

  Microsoft takes me in a big circle, when I try to download Photo Story 3. After that I selected to download, I am taken to a screen where I need to validate my windows. So I have to download a program that is supposed to work on my PC to validate my windows. When I run the validation program, I get a message that this version of the program is no longer supported.

  I will not go into the tale to be taken through 3 or 4 sites only for the back where I started.

  Help, please!

  How can I validate my XP with SP 3 Windows and download PhotoStory3? (I installed today 3 SP.)

  Hello

  I suggest you to follow the steps and check if it helps.
  (a) restart the computer.
  (b) before windows logo appears, press F8repeatedly.
  (c) in the Advanced startup option, select Safe Mode.
  (d) log in to Windows with an administrator account.
  (e) click Start , and then click on work station.
  (f) in the Tools menu, click Folder Options.
  (g) in the tab view, uncheck the option to use a simple file (recommended) sharing the bottom of the list.
  (h) click OK.
  (i) click on the tab display.
  (j) slot hidden files and folders, put the check mark for display the hidden files and folders.
  (k) click to clear the Hide extensions for known file types check box, and then click on OK.
  (l) we will find the nameddata.dat file in the following folder:
  C:\Documents and Settings\All Users Application data authentic
  m file) right-click the data.dat , and then click on Properties.
  (n) click on the tab security.
  (o) click on Advanced.
  (p) on the name tab, please check if everyone is listed. If so, click on the Exit button and put on check full controlbox.
  (q) If everyone is not listed, please click on the Add button and enter the name of everyone (without the quotes).
  (r) press entrance to the keyboard and select full control in the context menu, and then click OK.
  (s) Please, click OK to accept the changes.
  Now, restart the computer and see if you can pass the verification test and install Photo Story3.
  I hope this information helps!

• can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing path network not found

  can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing network not found path.

  After restarting pc for awhile, we can access shared folder & printer but after 30 minutes (more or less) again cannot access. In the printer folder connected printer displays status as long as it is impossible to connect to the win-2003 server. Please help me out of this problem because I support banking sector.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to reset the shared folders, showing network after modified/deleted folder

  System: Windows Vista 64-bit

  Problem: after files moved or modified, they persist in network folder, for example:\\my-pc\

  It seems that their ghosts never die. Even when I put the file back to what was before, they are not accessible, and read error message, "you might not have permission to use this network resource...". »

  They are listed under ' computer management > shared folders > actions ", but I can't delete them or change them.

  Why there is no easy way I can change the shared folders?

  answer: * e-mail address is removed from the privacy *.

  The only way I found to clean these entries is to use Regedit to edit the registry.  First the standard warning from Microsoft:

  ----------------
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
  ----------------
  To resolve this issue, on the server, start Regedit (start-> Run-> 'regedit'), and then navigate to the following key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\Shares
  Can find stocks that no longer exist in the right window. One at a time click once above and press 'delete '.
  Close Regedit
  Restart the computer.
  HTH,
  JW

• Shared folders - upgrade Windows 10 of 15.11.

  Hello

  yesterday has been saved by Microsoft Windows Update 10.

  as I can no longer change le shard records as network drive.
  it is the host vmware "'' is no longer found () net use z:" ","\ vmware host\Shared Folders'). ""
  
  Anyone has a solution for this?
  
  my computer:
  Apple Mac mini with el captiain, VMware Fusion 08:02 with windos 10 pro 64-bit

  
  

  Eckhard

  Hello

  I'm the developer for the VMware Shared Folders feature.

  The problem is caused by the Microsoft updates, destroying the registry settings.

  After the upgrade, you just need to check and restore the registry setting below and everything should start working (for folders).

  (No need to uninstall and install again, as this will also restore the registry, but takes significantly more time.)

  All you have to do is to change the registry

  HKEY_LOCAL_MACHINE\ SYSTEM\CurrentControlSet\Control\NetworkProvider\Order

  Name: ProviderOrder

  Type: REG_SZ

  Data: "RDPNP, LanmanWorkstation, webclient.

  Change it to:

  Data: "vmhgfs, RDPNP, LanmanWorkstation, webclient.

  Exit the registry application

  Then you'll then readers of shared folders and the UNC paths accessible once more. No need to reboot or log off. No need to uninstall and reinstall the tools.

  It has also been noted in wire Re: support Windows 10

  Hope this saves time to users.

  Also when I was at Microsoft earlier this year test Win 10 and shared folders, I and others (for redirectors) says the guys from the migration of this question and they promised it would be fixed.

  Steve

• Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD ID

  Dear Sir

  Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD ID

  I am in a field & I'll migrate with a domain name.

  EX: now I'm in the field of the AAA tomorrow my domain name will change to BBB. User accounts are created in two AAA & BBB and the two domain user IDs are different.

  data servers are also migrating with the new domain.

  is it possible to access share with the old user id folder in new field or both to share the files again with the new user ID Active directory.

  Kind regards

  Chauvet J.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• If Win XP SP1 is no longer supported, can I reinstall from my system disk and always upgrade to SP3?

  My hard drive is filled with thousands of uninstall files and folders while he was trying to upgrade my operating system to SP3. I want to wipe the hard drive and reinstall xp and other software. My system drive is XP SP1. Can I reinstall this version and then go online to upgrade to SP3?

  I have a laptop Dell Inspiron 5100 with a Pentium 4 processor and 1 GB of RAM (maximum). I don't think that I have the option to upgrade to windows 7.

  While Windows XP with SP1/SP1a or SP2 is no longer "supported" - it's just a matter of installing Windows XP patched SP3 to fall in this category 'supported '.
   
  My suggestion - to make things simple - if you install cleanly, simply download and install Service Pack 2 for Windows XP first.  Reboot several times.  Then, download and then install Service Pack 3 for Windows XP.  Reboot several times.  Then start visiting http://windowsupdate.microsoft.com/ and continue to install post-SP3 90 updates +.
   
  Windows XP SP2 for it professionals (it really does work for everyone)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=049C9DBE-3B8E-4F30-8245-9E368D3CDB5A

  Windows XP Service Pack 3 - file to Image CD ISO-9660
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2fcde6ce-b5fb-4488-8c50-fe22559d164e

  Windows XP Service Pack 3 network installation Package for
  It professionals and developers (it really does work for everyone)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4

  Although he * would * run Windows 7 (if the drivers are available) - I recommend sticking with Windows XP for this computer.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Home network not working not not because of 'ComputerName' not in the list of shared folders.

  My simple home network of 2 PCs with XP, SP3 and a Netgear WNDR3700 router was working fine. I changed ISP and now cannot get the home network to the top. Run the home networking on every PC wizard implements the internal IP of 192.168.1.1 for the router and 192.168.1.2 and 192.168.1.3 for 2 PCs. Shared folders and files appear to be configured correctly and successfully, I can ping the router and the other PC from each PC. After the Microsoft troubleshooting procedure, everything is good until I get to the stage where the "ComputerName" must appear in the list of shared folders in computer management, System Tools, shared folders, shares. All other devices and shared folders appear correctly on each PC. It is about the last step in troubleshooting, but I can't in front of her. What can I do? Or is the wrong thing? I'm almost to the point of thinking there is something in the registry (added with my ISP change process) that stop working. Help!

  In general, it is due to a firewall, in which case advice Jack will help.  In addition, there are a condition [rare] where the Type of a computer node becomes defined 'Counterparts' or 'P Pei' that will stop the communications between computers.  Bring up a command prompt (start-> Run-> "cmd") and enter the command:
  ipconfig/all
  If the 'Type of node' line presents itself as "Peer-Peer" or "Pp" or type "P", ("Broadcasting", "Mixed" and "Hybrids" are OK) then check out the following article:

  "You can't see the other computers in the workgroup on the network on a Windows XP computer"
    <>http://support.Microsoft.com/kb/903267 >

  HTH,
  JW

• E1000 wireless. Sharing folders on the network

  Hello

  Until yesterday my two PC can share files/folders.

  Then everything stopped.

  What is an adjustment to this router?

  Thank you.

  This is the first time I had this problem.
  But I guess that's why the first FAQ RCN starts with, 'How to reset Cable Modem'.
  A few months ago, I went to the Internet of the MRC.  In the process of the MRC gave me a new CISCO/Linksys router and an ARRIS TM602G modem.

  Years my Linux PC has successfully shared files/folders with my Windows 7 PC.  And my Windows 7 PC the files/folders shared with my Linux system.  I use samba.  A few weeks ago, I bought a WD TV Live Media Player to Watch Streaming videos from my computer on my TV.  It worked, too.  The WD TV Live Media Player Streaming has been able to browse shared folders on my Windows 7 PC and Linux.

  Two days ago my WD external drive, which was attached to my Linux box is no longer in effect.
  Then, I rebooted the Linux machine with the connected external hard drive.
  But my Linux PC did not start.
  Anyway, I don't know why my PC wouldn't start simply because a broken external drive has been connected via USB.
  So, I disconnected the external drive of the computer and restarted Linux.

  Then, I joined the WD external drive to my PC Windows 7 to try to run the diagnostics from WD of Windows.  But, the WD external drive was not recognized by Windows 7, so I rebooted the PC Windows 7.  Unfortunately, Windows 7 PC will not start with the connected external WD drive.  Once, I unplugged the external box WD Drive Windows 7 started very well.

  But, after starting, I realized file sharing between my Linux box, Windows 7 and WD TV Live Streaming Media Player stopped.
  My Linux box could still ping 7 box and vice versa.  And both could navigate on the Internet.
  But, neither able to browse shared files/folders more.  And the WD TV Live Streaming Media Player lost the ability to connect to a machine.

  So, these last two days I tried to understand where my configurations samba got screwed upward.
  I tried different routers and went crazy in the process.

  I knew that nothing had changed on my PC.  But, simply because I assumed that nothing has changed does not mean that I'm right.

  Finally, after I got back from work, I spent 3 hours keeps my troubleshooting and decided to browse the MRC Web site.  The first FAQ was titled 'How to reset Cable Modem' and I thought, 'couldn't hurt.  Thus, after the reset of the modem everything works.

  Thank you for your help.

• SSLv3 WAP4410N is no longer supported in Chrome, Firefox

  Hi all

  I have a Cisco WAP4410N maintenance a small office for the technicians of the drop-in to connect to our LAN, no heavy traffic or fancy management put in place, they don't see it as a wireless access point can connect to the Internet and access a few Samba Sharing.

  Recently I was making mistakes in Chrome and Firefox that SSL version used by the device is longer supported.

  Chrome (v 40.0.2214.111 m).

  A secure connection cannot be established because this site uses a protocol not supported.
  Error code: ERR_SSL_VERSION_OR_CIPHER_MISMATCH

  Since Firefox (v 35.0.1).

  Firefox cannot guarantee the security of your data on 192.168.128.1, because it uses SSLv3, a broken security protocol.
  Advanced information: ssl_error_no_cypher_overlap

  The device is running version 2.0.7.4 firmware, released January 2014, y at - there no way to bypass this SSL error? So far, I was able to connect to the unit using THE 11, but I'd rather solve the problem causing the error SSL rather than using it as a work-around. Has anyone else had this problem?

  Hi guys,.

  problem is solved in firmware that is never released publicly - 2.0.7.6T1 or 2.0.7.6T2 (the two Beta status). These units are already EoL (which means that no new firmware is planned to be released) I suggest you open the service request to a Small Business Support Center (HWC) and ask the last beta firmware.

  Michal

• Win7 64 bit cannot access my shared folders when I navigate to my computer via the same computer network

  Unable to connect to my own shared folders when I browse my computer over the network to the computer with the actions...

  That is to say: the folder shared C1 x... C2 can access \\C1\x without problem,
  but C1 Gets the error message dialog box not standard descriptions "\\C1\x is not accessible. You may not have permissions... and ends with the specified network name is no longer available. »
  I am the user who created the share and I'm trying to access the share on the same machine, it is shared as this user... what gives?  It's ridiculous!
  One might wonder why a user would access their own local through network shares when they are on the computer that is on the part...
  I have a piece of software (Builder of ship client/server on the same box) running on this workstation, I need to separate a part of the project to allow a remote workstation to work on the part of the drawing.  In order to perform the separation, the software connects to the server ship Builder and a folder (ShipConPSM) that is created when the server is installed, when I run the command split, this requires access to this folder via the "\\servername\ShipConPSM" unc path he quickly denied access and of course fails to perform the split.
  What I have to change to allow C1 to access its own shares?

  Hello Rgmiket311,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forum:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• No more connected after an update of Windows shared folders

  Hello everyone

  First post here, hope you are well

  I'm nay-seven working for music software, testing 10 Windows on a Mac 10.8.5

  After the last Windows Update today, some strange results on the side of Vmware:

  the folders on my desktop no longer opens, a mouse on them say 'empty folder' and double click not show a value (can't even delete them)

  I also notice a second shortcut on my desktop named "vmware shared folders (1).

  If I open the windows file browser I see a red x on 'shared folders (\\vmware-host)(Z :) '. "If I try to open it a message say" Z: is not accessible...

  If someone can help me on this issue, my appz works, but this fake desktop is a bit annoying

  Hello nayseven,

  The same problem has been reported for Windows 10 11 computer, and the user out there it is resolved by reinstalling VMware Tools.

  The correct way to do this is to uninstall VMware Tools-> restart guest operating system-> install VMware Tools-> restart guest operating system.

  The repair option still does not and can not solve this problem.

  --

  Wil

• Ubuntu LTS 14.04 will not install VMWare Tools ability to shared folders

  Get the following error when trying to install VMWare Tools within a host running Ubuntu LTS 14.04.  I tried to open a ticket in the VMWare system and got an error (lose faith in Vmware here as an ESXi + client Fusion...)
  

  
  

  
  

  Looks like Vmware must update VMware tools for Ubuntu 14.04 kernel headers?

  
  

  make: Entering directory ' / tmp/modconfig-vL08ip/vmhgfs - only '

  / usr/bin/make /lib/modules/3.13.0-24--c generic/build/include /... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.13. 0-24-generic '

  CC [M] / tmp/modconfig-vL08ip/vmhgfs- only/Backdoor.o

  CC [M] / tmp/modconfig-vL08ip/vmhgfs- only/backdoorGcc64.o

  CC [M] / tmp/modconfig-vL08ip/vmhgfs- only/bdhandler.o

  CC [M] / tmp/modconfig-vL08ip/vmhgfs- only/cpName.o

  CC [M] / tmp/modconfig-vL08ip/vmhgfs- only/cpNameLinux.o

  CC [M] / tmp/modconfig-vL08ip/vmhgfs- only/cpNameLite.o

  CC [M] / tmp/modconfig-vL08ip/vmhgfs- only/dentry.o

  CC [M] / tmp/modconfig-vL08ip/vmhgfs- only/dir.o

  CC [M] / tmp/modconfig-vL08ip/vmhgfs- only/file.o

  / tmp/modconfig-vL08ip/vmhgfs- only/file.c: In function 'HgfsOpen':

  / tmp/modconfig-vL08ip/vmhgfs- only / file.c:685:27: error: incompatible type for argument 3 of 'HgfsSetUidGid'

  (current_fsuid(), current_fsgid());

  ^

  In file included from/tmp/modconfig-vL08ip/vmhgfs- only / file.c:46:0:

  / tmp/modconfig-vL08ip/vmhgfs- only / fsutil.h:92:6: Note: expected "uid_t" but the argument is of type 'kuid_t'

  void HgfsSetUidGid (struct inode * parent)

  ^

  / tmp/modconfig-vL08ip/vmhgfs- only / file.c:685:27: error: incompatible type for argument 'HgfsSetUidGid' 4

  (current_fsuid(), current_fsgid());

  ^

  In file included from/tmp/modconfig-vL08ip/vmhgfs- only / file.c:46:0:

  / tmp/modconfig-vL08ip/vmhgfs- only / fsutil.h:92:6: Note: expected 'gid_t"but the argument is of type 'kgid_t'

  void HgfsSetUidGid (struct inode * parent)

  ^

  make [2]: * [/ tmp/modconfig-vL08ip/vmhgfs -only/file.o] Error 1

  make [1]: * [_module_/tmp/modconfig -vL08ip/vmhgfs-only] error 2

  make [1]: leaving directory ' / usr/src/linux-headers-3.13. . 0-24-generic '

  make: * [vmhgfs.ko] error 2

  make: leaving directory ' / tmp/modconfig-vL08ip/vmhgfs - . only '

  The filesystem (vmhgfs module) driver is used only for the shared folder

  feature. The rest of the software provided by VMware Tools is designed to work

  regardless of this function.

  If you want the shared folders feature, you can install the driver of

  running vmware-config - tools.pl once after being assured that gcc, binutils, make

  and your kernel sources are installed on your computer.

  These packages are available on the installation of your distribution CD.

  [Press the Enter key to continue]

  Seems to work fine with the tools in the recent update to VMware Fusion 6.0.3:

  http://www.VMware.com/go/downloadfusion

  Certainly the tools should be updated in order to support a view recent guests of Ubuntu Unity (disabled, sofar, also with 6.0.3 + 14.04): maybe in Fusion 6.1, who knows...