Shared network stuck real Variable

Similar Questions

• Real-time target - change IP and shared network varables

  Hello

  I create an application for the system in time real (Compact RIO).

  All data between the (current running on a windows PC-based) GUI and the real time system - is transferred via shared network variables.

  Shared variables are hosted on the target.

  I attributed the static IP address to the real-time target.

  Now for the question:

  After the deployment of the application in real time on the Rio target compact

  If I change the IP address of the target: how the shared variables 'know' to connect to the target?

  There is no place in the GUI (running on windows PC based) I set the IP address of the target.

  So I change the IP Address of the target (and for the sake of argument if I change the IP address of the PC, but they are always on the same subnet) - how to 'know' how to connect?

  Looks like a basic question I am absolutely certain I'm missing something to understand shared variable...

  Thnaks

  Hello Hazkel,

  The IP address of your shared time variable real target is located in the *.aliases file when you create an executable file, you will need to change there.  See the example below:

  

• reconnect the stall network of shared network variables

  I have a cRIO unit communicates with a laptop using shared network Variables, one of them being a table of 21 index which is buffered.

  The system connects and communicates very well, but sometimes the wireless laptop card is to lose the signal from the WAP, attached to the cRIO.

  In this case the network never shared Variables "reconnect" and start to receive values still once the wireless link is restored.  Is this expected behavior?

  When I tried to use other WAP industry instead of the card laptop wireless, I get no abandonment.

  Hello Ryan,

  Please contact National Instruments!  I looked into the problem you are having and I wanted to ask you a few questions more.  First of all, you have a period of time which allows the reconnection?  I believe that the Shared Variables should find the connection after a short period, but it may not be a very quick process.  It may take a few minutes to the Variables shared to reconnect.

  The other thing that could happen is if you have error son being passed by shared Variables, it is possible that the error is not be deleted, and so he will always see the error and not a so never reconnect.  In this case, you will need to filter this error and then clear the error in order to use again shared variables.

  If you have more specific information about your program that can help us to determine the reason for this behavior.  As a screenshot of your code would be useful.  Please let me know if you have any other questions and I'll be happy to help you.  I hope this helps!

• Access shared network drive?

  Is there an app or a way to access the wifi from a shared network drive files? As I shared my library of music, movies and photos?

  File Explorer is my choice and it's free and available on the market.

• on my network card, a question mark appears that wasn't there. He appeared as a "switch" until I disabled "sharing network". He went away for a day and returned. This is a hack of nieghborhood?

  My mother is a modem from Qwest. I'm on a laptop with wireless on the same account. We were on a homegroup network. I found a question mark on its network card and a photograph camera, on mine with the name 'switch' and no other info on this subject between the computer and the modem peak. I called Qwest and they said they didn't know what it was. So I disabled all the sharing network. He went away. 2 days ago. Today, I checked again, he had again disappeared from the workstation but now it's back on mine, but it shows up as a question mark, as it did on the desktop. And also, there were a few weird anomilies appear on our computers. Do I have a virus or maybe a neighborhood hacker?

  If you use Microsoft Security Essentials, start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected. Options vary by region, but phone support leads you to the Microsoft answer service (http://www.answerdesk.com/) in the USA at this time. After an initial free consultation, will be charged a fee for assistance, based on the details of the case.

  If this is not the case, go to your provider AV.

  You can also try this web site - http://www.bleepingcomputer.com - contains details for most common infections, often immediately after that they started to appear in the wild, and instructions are provided for how to remove infections using their malware removal guides. They also have forums where you can seek assistance from people who specialize in the removal of malware.

  Here are other free programs that can help:

  Malwarebytes anti-malware free - http://www.malwarebytes.org/products/malwarebytes_free Please note, do not accept the trial version of MBAM Pro that it will conflict with MSE while the free version won't.

  SUPERAntiSpyware Free - http://www.superantispyware.com/downloadfile.html?productid=superantispywarefree

  TDSSKiller (free) - http://support.kaspersky.com/faq/?qid=208283363

  HitmanPro (free for 30 days) - http://www.surfright.nl/en/hitmanpro

• I need to put in place a banner with a warning of safety or warning, to open whenever the shared network folder is accessible.

  I need to put in place a banner with a warning of safety or warning, to open whenever the shared network folder is accessible.

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums

  MSDN forums

  http://social.msdn.Microsoft.com/forums/en-us/VSX/threads

• How can I lock a shared network folder.

  I want to know about the network folder, how can I lock a shared network folder.
  Actually I'm under small network at home and I want to share some files, but I also want to protect files, no body, no go without my permission.

  Waiting for your response.

  Thank you
  Tauseef Ahmed

  Hello

  Adding futher to Wunders his Adviser.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  
  

• Problem to a file/printer sharing network.

  Hello

  I want to do a network to share files, printer and internet. I have already shared the internet by all connection to the access point devices through wireless and connecting the access point to the cable modem, but I can't share any file or folder.

  I tried many things to create a small network of win xp, but I failed.

  I have a wireless access point Dap1150 D-Link wireless modem 1 billion for the ADSL2 +, a PC (win xp) with a normal network adapter and an external wireless LAN adapter + a laptop (win 7) which has two cards and support network wi - fi.

  Please help I have searched a lot but I couldn't find anything useful.

  H

  Assuming that the "billion for ADSL2 wireless modem + ' is a router, and it is configured as one.

  Since you have a Windows 7 computer too, the network must be configured take into consideration.

  -------------------------------

  Maybe this can help.

  ---------------------
  

  The following looks like a long history (it's only 600 words). I know not what is knowledge of the user, and exactly what has been done already. The info go through the motions of the configuration and verify most of the common aspects of the LAN Windows OS features '.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account on the computers they are allowed to connect to everyone is an account, that means a group of all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• "the service does not exsist as an installed service-" File Sharing/networking

  I am running Vista x 64 Home Premium and have recently had problems with my file sharing-printer sharing network discovery-Media Sharing. For the last 8 months I run my Xbox Live through my computer laptop Ethernet to log-on Xbox Live connection and had no problem connecting. Recently I went to connect and was not able to connect my 360 * to the internet via my Ethernet connection. I checked my network & File Sharing settings and noticed that ALL my "Sharing" Options have been disabled. When I tried to turn it on I get "service does not exsist as an installed service. The only thing that works is the password protected sharing. I read almost all the options resets and sfc.exe and led to no result. When I run the sfc.exe program it gives me the final results of some files have been found to be corrupt, but have been unable to solve the problem. I can't locate my Vista recovery disc after moving so I won't be able to reinstall to factory set up. With regard to the system of recovery for some reason that I can't go until this situation occurred because of some settings which apparently changed.

  Hello rjaymz83,

  I suggest a system restore to before the issue started occurring:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  The issue occur also in Mode safe?
  You have carried out comprehensive analyses of viruses and malware on your computer lately?
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

• Problems of access to shared network of Vista to Windows 7 files

  Hi guys, I was struggling with this problem for some time.

  Tried the solutions all possible "Found home" - nothing works for me.
  Problem:
  I am invited to a password everytime I try to access a PC running Windows 7 since Vista PC (password protection sharing is already disabled on PC Win7)
  Tried every possible password - don't leave me.
  I want to:
  See shared files and connect to the shared network printer on PC Windows 7 (64 bit) for your PC Windows Vista (32-bit)
  Please:
  Has anyone encountered the same issue and have you been able to solve it?
  
  
  
  
  
  
  Best regards
  Alex.

  This thread was written for a Win7-WinXP network, but a user found that it worked for Vista as well.  If you have a router, then jump on all references to the IP settings that your router will have them defined for you.

  A procedure step by step for the creation of an Ethernet cable to both computers between Windows 7 and Windows XP with ICS

  To begin, you must make the password protected sharing turned on.

• Error with deleting the PDF file opened in preview only pane on the shared network drives

  I have a problem within Windows Explorer, I file open with say dozens of PDFs I have the preview pane open so I can tell what was on the pdf file selected without fully open. After you have determined whether I need it or not, I'd go for delete the file. However, with the file selected and preview pane, you can not delete the file gives an error message saying: the file is already open and cannot be deleted.

  I found that this happens on users with Windows 8.1 and Windows 10 machines at my place of work with different versions of Adobe Reader and Acrobat. Main versions being Acrobat 9-10, drive DC 15. Also only on the product on shared network drives, local hard drives are not the issue.

  Also, I installed another PDF reader and do not have the same problem if I put it in the default PDF Viewer. Leads me to believe that the problem is with the Adobe programs and non-Windows. I want to continue to use Adobe since I have a lot of licenses of Acrobat. Turn off the preview pane is not an option for my end users, since the amount of PDF files that they go through in a day is quite high.

  Please notify.

  I'm sorry. I'm all out of suggestions. There may be others somewhere that I saw but patches are usually

  1 turn off the preview pane

  2. use shift-delete

  3. remove the drive and use another pdf reader

  Seems that MS and Adobe have a hard stop at this time. And as I mentioned earlier, we had this problem on our drives to network with other files. Even the products Ms.

• AppSync with shared network Thinapps

  A few questions about Appsync with shared network applications.

  I have 5 Windows XP systems that install everything to run the thinapp (Office 2007 Std) from the network share. In the package.ini I put the thinapp to check an update every time it launches, do not know if it is better, only to set it there so I could control the start of the update. I created a new version of my thinapp with some modifications, including activation of Powerpoint, which was not initially enabled. I then pushed the new version in the directory specified in AppSyncURL in the package.ini and then ran the thinapp one of 5 systems. I looked at the updated thinapp (via the new file in the directory creation) but it seems to be stopped once the new files have been copied, I assumed it was because the other guests were linking the same thinapp, so I closed the thinapp on all 5 systems and reopened on one, after a few minutes that the update has been completed, including the activation of PowerPoint. When I ran the thinapp on other systems of all the new changes came with the exception of PowerPoint being activated. I guess that's because the thinreg update portion was only executed on the original system which began the update. My reasoning is correct? Would be the best way to solve this problem, configure something in a login script or a GPO to re-run thinreg necessary?

  Next part of surpass push to use thinapp was to save space, we intend to use it with VDI images gold hopfully have a SAN reduced foot print as migrate us our users in general for physical machines to VMS. Currently, we don't have a policy that requires users to disconnect during the night, normally when you deploy updates from traditional applications a message is sent by the app said the world team to make sure and disconnect. While we still might do in the future with thinapp hoping updates be more transparent for the user. But based on the above test it looks that updates will not fully applied to a set until all users are out of this.

  While this logic sence I want to just make sure I'm not missing something, is there a better way to update the shared applications? Or I'll better just install them locally on the machine, possilbly as part of a gold statue.

  Hi Roybfr,

  I want to share my knowledge on App Sync with the same example with which you asked the query. I will answer your questions in 2 sections. One for the process of AppSync and other for VDI computers desktop and thinapps residing on them.

  Section of AppSync: -.

  1. If you have desktop Thiinapped 2 k 7 kept one a network share and the version update of office 2 k 7 (which has been configured to enable the PowerPoint) stored on the Web server.

  2. you have 5 office machines.

  3 suppose that you launch the thinapp 2 k 7 on the desktop sharing network 1.

  4. once launch you the thinapp 2 k 7 Desktop 1, appsync process is launched and the .ase files are named and has started, updated on the network share.

  5. in the middle of the appsync process which began by launching the 2 k 7 packet on the network share, stop the appsync process by closing the exe launched from Office 1.

  6. now launch the 2 k 7 on the network share from office 2. Once you launch the office 2 k 7 2 office package, AppSync process is started from when he was arrested and not from the beginning.

  7. let all to update completely .ase files until they become the size of thinapped version updated, maintained on the web server.

  8. now do not revive the thinapped 2 k 7 2 office package.

  9. If you launch the thinapped 2 k 7 exe on the network share from office 3 you will get the message to update Appsync (that you defined in the file package.ini) and now the version update of office 2 k 7 will be launched. This means that now the network share has the version update of office 2 k 7.

  10. now, if you launch the office 2 k 7 on the network share Desktop 4 and 5, you will get the updated office version.

  11 but to get the same version of update to office 1 to disconnect, and then start the 2 k 7 packet on the network share

  12 office 2 stimulus package on the network share and you'll get the version update of office 2 k 7

  Conclusion: -.

  1. AppSync can be initiated by the launch of the thianpp on the network sharing of any of desktop computers

  2. once the AppSync is completed, the new version will be available (.ase will be converted into the updated version .exe) by raising the exe thinapp on the network share from the Office where the Appsync initiated or simply launch the exe thinapp by the remaining workstations where the thinapp on the network share was never launched.

  3. the configuration you made on the updated version is maintained on the web server will not pulled / available on the network share if the appsync is successfully completed.

  4. If you want a specific configuration to be part of your update to Thinapp (which is stored on the web server, and pulled on the network share), you must use the "SbMerge" utility to make the configurations as version stored on the web server to update the part of you.

  5. Thus, create the updated version of the Thinapp, check the necessary configurations, apply overwhelm and rebuild the updated version of the thinapp. Then copy it to the web server. And then start the process of AppSync.

• Deployment of local variables shared on a real-time target

  Hello everyone, once again

  I read more posts and knowledge base articles about this topic than I can count at this point, and I'm scared, I'm still not clear on exactly how it works, and I hope that someone can delete it for me, if it is to earn themselves some laurels more.

  I have a project with a real-time quote and the other Windows.  They shared communication via network-published variables.  The real-time part also uses shared single process variables to communicate between the loops.  I have the intention of all 3 libraries of shared variables (Windows-> RT, RT-> Windows and RT Local) to be hosted on RT target for reliability.  Real-time executable must start at startup and run even if side Windows is not started (on the side of Windows is optional).

  I realized that real-time executable will not start the variable engine shared and/or deploy itself shared variables.  I also read that I can't deploy the shared variables programmatically from the side of RT.  This leaves only two options that I know of:

  (1) their deployment programmatically in Windows-side program.

  (2) deploying the shared variables on the target RT manually via the project in the LabVIEW development environment, and

  About option 1, as I said running Windows is supposed to be optional, so you have to run a program on the Windows side before the side RT will work is highly undesirable.  Moreover, even if I do a little "Deploy shared variable" application that runs at Windows startup, I can't guarantee that it will work before start of the side RT executable will run.  In this case, the executable file RT will fail due to not having the variable engine shared running?  If so, and side Windows, and then starts the engine / deploys the shared variables, the side RT begins to work automatically?  If not, is it possible to trigger this restart of the Windows startup application side?

  Also, I just read everything and tried the option to build to deploy variables shared in the application of the side Windows.  Not only that my RT shared Local Library variables not listed as an option (given that the application of the side Windows does refer to it in all for obvious reasons), but when it deployed two other libraries at startup, the program side of RT (which was running in the development environment) stopped.  I'm not positive that would happen even if he was running like a real executable file, but it is certainly enough to make me nervous.  I assumed that the library is not listed may be resolved by including a variable network-a published in the local library of RT and including the app side Windows.

  About option 2, I don't understand how I'm supposed to deploy my libraries shared variables without stopping the execution of the startup on the target real-time application.  Once I did, the only way to restart the application of the RT is to restart the computer RT, correct?  In this case, I just undid all the interest to deploy the shared variable libraries?  Unless libraries remain deployed and variable motor shared running even after restarting the computer of RT, which would solve the problem I guess.  Certainly, I would like to know if this is the case.

  However, option 2 is complicated by the fact that when I manually right-click on any of my shared variables libraries and select "Deploy" or 'Deploy all', libraries still do not appear in the Manager of the distributed systems, even after clicking Refresh several times, on the local system or the target system.  The only thing that shows up, on both sides, is the Group of 'System', with FieldPoint, etc. in it.  The same is true when I run my application in real-time in the development environment, even if the shared variables are clearly working, as I mentioned earlier.

  So, if you have done so far through this mammoth post, thanks!  I have three main questions:

  (1) are that all my descriptions above correct in what concerns the variables how work sharing?

  (2) what is the best way to meet the requirements I have described above for my project?

  (3) why shared variables libraries not appearing in my manager of distributed systems?

  Thanks for any help you can give on any of these three questions!

  -Joe

  1. Yes, as soon as you deploy the project the NSV is tranactional.  EVS is loaded by MAX when you configure the RT target and begin to operate as part of the boot sequence.

  2. you can see anything on your target rt in the DSM?

  3. Yes, NSV and EVS are persistent resets.

• Shared on a real-time target Variables defined causes the command to remotely fail

  Here's a strange. We create a solution of customer using a CompactRIO, and they want remote panels can view and interact with the executable file. That's fine, we are able to create this, but we noticed a thing is:

  If we build and deploy our code in real-time for CompactRIO with all shared Variables associated with a type definition, the executable will not run. Indeed, it is reported by the browser as a broken VI remote Panel utility.

  Breaking the shared link Variable with the type-def and rebuild the executable file, solves the problem. Weird.

  Anyone else seen this before?

  Hello Thoric,

  I think I spotted a CAR already assigned to it:

  http://www.NI.com/white-paper/13235/en

  #292012

  Looking at our notes this should be fixed in the next version.

• Sharing network Variable not in Distributed System Manager

  I have experience with LocalHost.   I have 2 computers A, B.  A, I can read a created/static SNV of B.  However, I need to use a SNV on A to A (I don't know why, I inherited this project and it is not at all commented).  So I create and I see it on my drive D:\\.  However, when I go to NI DIstributed System Manager, there are no library under localhost.  So I write in a VI and call it in another, and I get "DataSocketRead in VI" with the code 56.  Don't know why I can't have it is the Manager.

  I have attached ahev the library in case something wrong here.

  Have you deployed and right click the shared variable library?

  If it's an executable in the bulder properties you should check to deploy shared variables.