Shared Services 11.1.2 cannot remove affected user to a security group

Similar Questions

• In Shared Services, we can generate a list of users?

  Hello
  
  We have many users who belong to different groups. Using Shared Services, is there a way to go out, in a report format, the list of users belonging to a particular group or all groups?
  
  Kind regards
  Nathalie

  Try using LCM.

  In addition, please read Re: users from the list of Hyperion

  Concerning
  Alexander

• Cannot remove the virus XP Total Security 2011 in XP

  Hey when I goto in the internet newspaper, I get an Internet Explorer alert. When I goto continue surfing without any security measure, it doesn't let me go to any page

  Hi Mark,

  First, update your antivirus and run a full scan of the system.

  Remove temporary files so in safe mode (C:\windows\temp and click Start-> run, type &-> % temp %-> ok and erase all files.)

  I hope this helps.

• Automation of the operations of the group security Shared Services - Add / Remove / outsource

  Hello

  Is it possible to automate, add / outsource / remove users (external user) from a security group?

  Earlier, I used to do this with MXL (change user...) but it seems that this approach is not taken in charge of 11.1.2.4 from.

  Thank you...

  There are a lot of messages and articles on LCM, everything you need to do is a little research.

  There is also documentation of LCM - life cycle management

  The LCM of SSP import options are available to- States Migration native Directory Import Options

  What I recommend is to do the research, run an export of LCM of SSP, throw an eye on the format, have a look at the options available, create your import files, import into shared Services.

  Once you are satisfied, you can start seek to automate using the LCM, the information is in the documentation link I provided

  See you soon

  John

• Windows cannot remove your homegroup computer form

  Hi all! I had difficulties to remove the computer from my dad in my old network homegroup. However it is stated below:

  

  Someone please help.

  Hi Christophe,

  I understand that you cannot remove a computer from the home group.

  This power is produced if a file has been corrupted and remove it got the operation of the PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OHS. "

  I suggest check the link and check how can I remove a computer from a homegroup.

  Homegroup: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  Leave a homegroup

  
  http://Windows.Microsoft.com/en-us/Windows7/leave-a-HomeGroup

  Hope that helps you remove the computer from the home group. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Record of planning app with shared services

  Hi all.
  
  I created a new classic of planning app (11.1.1) with the intention of mirroring our production application. I copied this sketch of the production to the new application app. I also export the sql server database used by the application of the production planning and restored to the new app everything seems great so far.
  
  My question is about the registration of the new shared services application. The application of production has about 35 MSAD authenticated users. What would the recording process of the new application with shared services and implementation of the production application users. The new application has not specifically record when it was created.
  
  I'm a little worried. I don't want to do anything that might affect the current application of the production. How to register for the new application and add users without affecting the current application of the production. Is also simple to go to Administration-> application settings and clicking on 'Register Shared Services' and establishment of new users? Or are there any other steps that need to happen?
  
  Any help is appreciated.
  
  Dave

  You need to register as you created an empty planning initially application which will be saved with shared Serices, would the provisoning to users/groups in shared services for the planning application, and then you perform the migration of the relational database across.
  Wil you will probably have to change the URL of the shared services within planning, but no need to re-register.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Restrict a user/group to allow access only to specific shared services groups

  Hello team,

  I have EMP 11.1.2.2. I created different groups) a ' Admin_groupA') b ' App_groupA' c) "App_groupB" under the native directory. I have configured Shared services-> administrator to this 'AdmingroupA '. Those who belong to this group "AdmingroupA" is able to add a new user to the directory of companies to provide access to the group 'App_groupA '. But I don't want the users of 'Admin_groupA' to access 'App_groupB '.

  Since I put in service Shared services administrator privelge to this group of "AdmingroupA", "AdmingroupA" users are able to access "App_groupB" also. Can you please let me know how I can limit 'AdmingroupA' to provide access to users to the group "App_groupA".

  Thank you for your valuable contributions.

  You said, as you have configured administrator privileges of shared services to this 'AdmingroupA '. I don't think that you can restrict the user from this group to provide access to other users.

  ...

  Did you hear about delegate user management? Managing Director can view and manage only those users and groups which they are responsible. Good read on the your hss version Administrator's guide and see if it helps!

  See you soon

  BP

• How to create users in bulk in Hpyerion Shared Services Console

  Hi all

  I need to create users in bulk in the Shared Services Console. Since I have many users, so I don't want to use Front End. Instead, I prefer to download a CSV of things sort.

  For this I export the console shared services and open the file Users.csv.

  Now my plan is to add all my users here and then going to import this backup of the Shared Services Console.

  The only point where I am confused is that how should I indicate the passwords encrypted in the file Users.csv and also what should I write in the column "internal_id."

  If you use LCM and native users then you should be able to enter a uncrypted password and when it is imported, it must be encrypted.

  Leave empty internal id column for new users, by creating a new test user.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Users that are not not in Shared Services

  I created a Hyperion Planning 11.1.1, application commissioning has been done perfectly, while providing access via "* access control report *" I couldn't pick any user, including native users as "admin", none of the users are in the field available users or groups. "
  
  Configured applications of Hyperion which: Essbase, Planning, Shared Services and space to work with SQL server 2000.
  
  Please suggest. Thanks in advance.

  Hello

  First of the security warning means that all dimensions standards need to access permissions applicable to them (account, entity, scenario, version)
  Also administrator doesn't have the same constraints on access permissions, which means that you do not need configure the security of the members to the admin user

  If you directly connect to shared services (http://: 28080/interop/index.jsp)
  Expand user directories > native Directory > users > New > annotates
  Right click on the new user and available, give the user one of the planning no administrator roles, I would say that the role of Planner.

  Now you connect in planning and try and assign permissions member access, you should be able to assign permissions to the new user.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Security of Shared Services... Urgent

  Hello
  
  We installed the Hyperion 9.3.1 product suite and outsourced shared services users. We have planning, reporting of the components as well.
  We have the same safety management which is present in attempts to connect to Essbase before user disabled, inactive days etc.
  If so, how to set it to shared services so that it applies to all users through different products.
  
  Appreciate your answers, thank you

  Hello

  I don't think you can force users to be inactive before number of bad openings, inactive days etc. are not valid in Shared native directory services. I believe that this is because the shared services is shared by multiple applications, etc.

  Normally, TAM, MSAD, etc. is used to force users to change their passwords, the duration, after which the password, etc.. These external directory services are user and leaves Hyperion management tools is for them.

  Let me know if it helps.

  See you soon
  RS

• question of shared services

  Hello
  
  I have a question I'm not able to solve. We are trying to install version 11 and every time I run the configuration utility to configure with shared services. It says successful but when I validate its all red and not able to configure with shared services.
  
  I said that drop the user to the shared services will help. I did also several times. but no help
  
  any suggestions
  
  Kira

  Hi Kira,

  1. When you say user of shared services, do you mean to say 'user' of shared services? or a schema/user for shared services in oracle database terminology?

  2. If you tried to drop the user, then I have a recommendation to drop the user using "CASCADE". It helped me.

  3. try and re set it up again

  Sandeep Reddy, Enti
  HCC
  http://hyperionconsultancy.com/

• How to remove a computer from my working group under XP and Windows 7?

  We have recently implemented a network composed of our three computers (2 XP) Home Office and 1 Windows 7 to share files and printers.

  However, we found its malfunction and could not share what we expect.  One of the reasons, we can see it, could be one of the computers have been infected.

  So, we try to remove this computer from the working group.

  However, no matter how hard I searched on Internet, there is no way to remove the infected computer's existing working group.

  There that experts can help us?

  Thank you very much!

  Hello

  You cannot remove a computer from a working group, but you can change the name of the working group.

  http://support.Microsoft.com/kb/295017

  http://www.SevenForums.com/tutorials/51711-workgroup-name-view-change.html

  But that will not necessarily mean that they are not accessible by other computers on the network, or it will necessarily make the other less likely to be infected through this PC computers.

  The only way to "withdrawal" of a computer on a network is to unplug the network cable or remove the name of the wireless network.

  If you are concerned about a possible infection, you must get the malware to day and scan for malware protection.

  However, I suspect it's more likley your problems are caused by the lack of knowledge in the topic network different Windows operating system. This can help...

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  If you are having specific problems post back with details and someone will almost certainly try to help.

  Tricky

• Windows Firewall does not start. Cannot start connection ICS internet sharing service

  Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

  Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

• The action cannot be completed because the file is open in Windows Media Player Network Sharing Service. How to make a fence a file on a network share site?

  I could not delete the windows medial player.  On the problem of the firing line not found no problem. A solution to the problem was to remove all the files on media player.  When you try to do it I get the message that I could not delete the file because it was open on a sharing service.  I've never used a media sharing site, and it has to happen when someone else was using my computer.  How close this case and stop any media sharing service which can be opened?

  I could not delete the windows medial player.  On the problem of the firing line not found no problem. A solution to the problem was to remove all the files on media player.  When you try to do it I get the message that I could not delete the file because it was open on a sharing service.  I've never used a media sharing site, and it has to happen when someone else was using my computer.  How close this case and stop any media sharing service which can be opened?

  I do not recommend, you delete all file system, because it can cause you many problems.
  But in general using unlock you can remove almost anything literally...

  http://www.filehippo.com/download_unlocker/

  It will show which process is the file/folder you want to delete, and even it will remove the process or service holding the file/folder you want to delete...

  go at your own risk with regard to the deletion of system files
  

• ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  Hi all

  I tried provide access to filter the group in both SSP and thru Maxl command but still get the error below. Any experience of this problem? If Yes, please let me know how you solved this problem.

  
  

  ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  
  

  Thanks in advance!

  Krishna

  Read the support document that I posted the link, prior to changes for openldap ensure you that it is saved.